Вы находитесь на странице: 1из 4

Komfortschliessung_FB and set it to aktiv and presto you have windows roll up wi

th key fob.
HU_NBT 3000 VIDEO_SPEEDLOCK_CONDITION none

SPIEGEL_KOMFORT_EINKLAPP
nicht_aktiv
KOMFORTSCHLIESSUNG_FB
nicht_aktiv
kay you made this unnecessarily complicated. Best would be to:
1.start by creating a blank "FSW_PSW.MAN" in the WORK folder.
2. Open NCS Expert.
3. Select the appropriate profile
4. Click on VIN/ZCS/FA, select your chasis, and then select the appropriate ECU
(I think EWS in the E39s case)
5. Click back
6. Click on "process ECU" and select the GM3.
7. Click the button to read the ECU data.
8. Go back to the work folder, and there should be an FSW_PSW.TRC file that has
data only from the GM3. In there will be a line that says "KOMFORTSCHLIESSUNG_FB
". Under that it'll say "nicht_aktiv". Change that to "aktiv"
9. Click file>save as> and then where it says file type, change it to "all"
10. Save the file as "FSW_PSW.MAN" and say yes when it asks you to overwrite.
11. Now back in NCS Expert, change the job type to "SG_CODIEREN"
12. Hit execute job.
You should now have convenience closing via remote

Depends on the VIN you are using. If you VO/FDL Coded yours (NBT) with a VIN tha
t came with internet through Assist service and you updated your service using t
he menu, your provisioning is set to use the Assist SIM/Data. From what you have
on the screen. It looks like it's trying to use SIM/DATA, when it cant see it,
it shows what you are getting.
Do this. VO/FDL code your NBT with DZ17872 VIN (magic VIN/Euro VIN) provisioned
for Live and Internet. Once you have done so. Update your service using your men
u. Once you have updated you should see Live and Internet on your menu. This VIN
no longer has service with BWM, i think service expired. However it has the pro
visioning info for Live and Internet. Just simply VO/FDL code the NBT with your
Donor VIN of your NBT (Original VIN). DONT Update service ever again. You should
now retain Live and Internet.

Successfully coded the following features:


Close Windows/Roof with key fob
CAS
KOMFORTSCHLIESSUNG_FB
aktiv
Unlock Doors when eject key fob (turn off engine with CA)
CAS
ER_KEYOUT_AUTOVR
aktiv
Auto eject key after ignition off while holding Start/Stop button (Not sure if t
his one is needed with CA but my doors unlock immediately afetr turn off engine)
CAS
KOMFORT_EJECT
aktiv
TIME TO HOLD START/STOP BUTTON FOR AUTOMATICALLY EJECTING KEY [TIME_MS=DATA*50]
(LINKED TO [KOMFORT_EJECT])
CAS
KOMFORT_AUS_IN_50MS
wert_03 OE =15*50=750ms (I didn't change this one, wert_03 is the OEM setting)
Wiper wipes to End position after turning engine off
2JBBF
ZYCLUS_VOLLEND_KLR_AUS
aktiv
Auto Headlight Sensitivity adjustment from BC Button
KOMBI
LICHT_AUT_WERT_1 aktiv
LICHT_AUT_WERT_2 aktiv
LICHT_AUT_WERT_3 aktiv
Digital Speed
KOMBI
BC_DIGITAL_V
aktiv
True digital speed
KOMBI
BC_DIGITAL_V_KORREKTUR
nicht_aktiv
Remove blanc line from BC menu
KOMBI
BC_LEERZEILE
nicht_aktiv
Side Marker Delete US
NFRM
SIDEMARKER_US_MIT_FRA_V
nicht_aktiv
Disable windows safety feature. Opening doors will not interrupt window roll up
operation.
NFRM
FH_TUERAUF_STOP_MAUT_3R
aktiv
Double Blink Hazards
NFRM
DOPPELBLINKIMPULS_WARNBLK
aktiv
Changed the number of turn signal blinks. It's a setting for each key, so there
are four settings to change. Use nettodat method:
NFRM
MIND_ANZ_ZYKL_TIPP_BLK
AC off with auto mode. Seasonal setting.
KLIMA_MIT_AUTO - four lines need to be changed
nicht_aktiv

Still researching about the following features:


Enable the parked car ventilation option. I can't read 2URAD module. NCSExper gi
ves me an error. Can't access 2URAD module with K+DCAN cable.
2URAD
STANDHEIZUNG
aktiv
Recirculating air memory
IHK
UMLUFT_MEMORY
aktiv
Eco pro remember last state. Tested but not working. Eco-pro still defaults to O
FF when engine is restarted.
IHK
ECO_PRO_LAST_FU
aktiv
Fuel Tank Reserve Warning. I like to put gas when I'm at quarter tank. Currently
it warns me at around 1/8.
KOMBI
C08_TANK_SCHWELLE_RESERVE
wert_01
Gear shift indicator in OBC. Tested but not working. Gear indicator is still sta
ndard D while driving.
KOMBI
SCHALT_PKT_BC
aktiv
True analog speed. Disable correction. Found other options. Doesn't work.
KOMBI
BC_V_KORREKTUR
nicht_aktiv
Found the following options that reflect the analog speed, but haven't played wi
th:
C08_K_ZAHL_TACHO - IMPULSES PER KILOMETER FOR SPEEDOMETER
wert_06 77,5B E84
C08_K_ZAHL_TACHO_KOMPL - IMPULSES PER KILOMETER FOR SPEEDOMETER (COMPLEMENTARY)
wert_06 88,A4 E84
C08_K_ZAHL_WEG - IMPULSES PER KILOMETER FOR ODOMETER
wert_06 D2,5C E84
C08_K_ZAHL_WEG_KOMPL - IMPULSES PER KILOMETER FOR ODOMETER (COMPLEMENTARY)
wert_06 2D,A3 E84
Freezing temp warning (lower limit)
KOMBI
AUSSENTEMP_ANZ_FEHLER_1
wert_03 36
Increase Angel Eyes Brightness
NFRM
PWM_SL_1_FKT_SL_TFL
wert_09 currenly at this setting
Eyebrows on with DRL
Angel eyes different brightness at different stages
Rear lights at different stages

Вам также может понравиться