Академический Документы
Профессиональный Документы
Культура Документы
ERV - G
"YELLOW BAND"
ERV high quality expansion joints by ELAFLEX / ContiTech. With swiveling flanges, DN 25 -1000.
ERV - R
"RED BAND"
ERV - GR
"GREEN BAND"
ZVA Slimline (EN 13012, TRbF 513, PTB, ATEX)
Nozzles by ELAFLEX / Hiby : ergonomic design, long life, fully serviceable.
ZVA 200 GR (EN 13012, TRbF 513, PTB, ATEX) Corrosion resistant automatic nozzles ZV 19 / ZV 25
Automatic nozzle for active vapour recovery. Automatic nozzles in special construction of Manually operated nozzle for gasoline, diesel, fuel oil:
Suitable for all standard gasoline fuels, up to 45 l/min. gunmetal, bronze or stainless steel. Suitable for ZV 19 (DN 19) up to 100 l/min.; ZV 25 (DN 25) up
ERV - GS ROTEX Special Flanges Working pressure 0,5 up to 3,5 bar. - Design "GRV3" solvents, alcohols and chemicals. to 140 l/min. Working pressure up to 3,5 bar.
with integrated vapour valve "On / Off" GV3, Special types for chemicals available.
"YELLOW STEEL" "ROTEX" Standard flanges made of steel, zinc plated Design "GRVP" with vapour proportional valve GVP.
Similar to type ERV-G, but suitable for perma- For permanent stress through hot heating water, and yellow chromated, acc. DIN. Other flange
nent high temperatures (max. +100C at 10 bar). cooling water and hot air. Working pressure 10 bar standards and materials available, e.g.:
Flame resistant according to Germanischer Lloyd. up to 100C, 6 bar up to 110C. Used as safety Type ZVA 200 GR Type ZVA - VA Type ZV 19
Lining NBR. compensator in heating installations acc. DIN.
Lining EPDM.
With small diameter
TW flanges of forged
aluminium PN10
Type TW
Type ERV-GS Type ROTEX
Nozzles for aircraft refuelling ZVA for AdBlue according DIN 70070 Safety Breaks (EN 13617-2, ATEX)
With control rods
(tied flanges) Manually operated nozzles for overwing refuelling. Automatic nozzle ZVA of nickel plated aluminium Self-closing safety break couplings for nozzles,
Type ZS Suitable for Avgas and Jet fuels. ZVF 25 up to for urea solution (AdBlue), DN 15. Working pressure reusable. - For the protection of dispenser, hose
140 l/min, working pressure 3,5 bar. ZVF 40 up to 0,5 up to 3,5 bar. Spout with magnet opening; assembly and car in case of drive-off incidents.
400 l/min, nominal pressure PN 10. Refuelling only possible with ELAFIX 40 magnet Petrol + Chemical Hoses Hose Fittings
adapter within vehicle filler neck.
ERV - OR ERP SSB 16 PSB
With non-swivelling
"ORANGE BAND" "RED SPOT" SAE flanges for Type ZVA AdBlue
For liquid petroleum gas (LPG tank trucks and refuel- For sanitary facilities, cold and warm water, swimming hydraulic oil systems
ling stations). Temperature range -30C up to +70C. pool water, sea water, drinking water. Highly flexible
Max. working pressure 25 bar, burst pressure and low own resistance. Working pressure max. Type ZVF 25
>100 bar. Lining NBR. 10 bar. Lining Butyl/EPDM. CSB 21
ELAFIX 40
Accessories
SSB 25
Type ERV-OR Type ERP Type ZVF 40
Inner sleeve
Bulk delivery nozzles
EKG
of stainless steel, Manually operated fuel oil nozzles DN 32 - 50,
e.g. for granulates
types ZV 400/ 500 and ZH 35/ 50. Available either
with fixed spout or TW coupling. Flow rates 250 - 650
Nozzles + Accessories
GKG
l/min, nominal pressure PN 10.
ZRS 38-J SSB 32
Aircraft refuelling hoses (EN 1361, API 1529) Fuelling hoses without helix (EN 12115, TRbF) Fuel oil reel hose Hose fittings ferrule type (VG 95951/EN 14424) SPANNFIX hose fittings (DIN ISO 228, NPT) SPANNLOC hose fittings (DIN ISO 228, NPT) "TW" couplings (DIN 28450, EN 14420-6) Teflon PFA coating
"YELLOW BAND" "YELLOW BAND" Type XHD 32-50 without helix. Suitable for Female/ male hose fittings (ferrule type) with union Female/male hose fittings with re-usable SPANNFIX Female/male hose fittings with re-usable SPANNLOC Quick couplers acc. DIN 28450 - one hand tightening without tools, safe and leak-free connection. All stainless steel fittings, flanges and couplings
Types HD-C, Type HD 10-200 without helix, for reel operation. petroleum based products up to +65 C. Lining NBR nut, DN 13-25. Of brass, chrome plated brass or pinned safety clamps of hot stamped aluminium. bolted clamps of hot stamped aluminium. DN 13-100. For tankers and industrial applications. Sizes 2, 3 und 4. Of hot stamped brass (standard ), available with red coloured PFA coating for
VHD, PHD, TW-E. Suitable for all petroleum based products. Lining NBR. W. P. 16 bar. stainless steel. Also available as non-reusable DN 19-100. Working pressure up to 25 bar. Working pressure up to 25 bar. stainless steel or hot stamped aluminium. Dust plugs also of polyamide. Working pressure up to 16 bar. specially aggressive media.
W. P. 20 bar. NR-Type .
Suitable for all aviation
fuels. With NEON bands Type XHD
Type HD Type M
for improved visibility. Type MX Type MC Type VB-P
Type MB-Al
( dust cap ( dust plug
Specified by all major polyamide )
aluminium )
oil companies. LPG hoses (EN 1762) Type V
Lining NBR, working Tank truck hoses (EN 12115, TRbF) - brass - - brass -
"ORANGE BAND" Type ...SSE
pressure 20 bar.
"YELLOW BAND" Type LPG 10-100 without helix; type LPG 16 Accessories:
Type TW 19-200 with helix. Suitable for all petroleum for Autogas. Suitable for propane, butane and Type VX Type VC
anti-kinking sleeve KS 16 Type VK
based products. Lining NBR. Working pressure 16 bar. other L. P. gases. DVGW-approved. Lining NBR. colour sleeve CS 16
Type MK-SS
( male coupler ( female coupler
Working pressure 25 bar. brass with stainless steel w.
female thread) female thread ) DDC Dry Disconnect Couplings (STANAG 3756)
Universal tank hoses (EN 12115, TRbF) Type TW anti-kinking sleeve KS 21
colour sleeve CS 21
Self locking coupling, Mann Tek brand. For liquid
"BLUE-WHITE-BLUE" Type LPG
media or liquefied gas. Can be coupled up to 7 bar.
Type UTD 13-25 without helix, UTS 19-150 with helix. Type MC...SS Made of brass/bronze, aluminium or stainless steel.
Type MX...SS
Suitable for most chemical and petroleum based Working pressure PN 25 (PN 16 for aluminium).
products and solvents. Lining UPE white with Special types (DIN 405, EN 14422-7) Accessories for rail car tankers Camlock couplings (DIN 2828, EN 14420-7)
patented OHM conductive stripe.
Corrugated tanker hoses (EN 12115, TRbF)
Hot bitumen hoses (EN 13482, TRbF) Hose fittings of stainless steel with special thread -stainless steel- -stainless steel-
Rail car adapters KWZ one end with rail car Dust caps AMB, male couplings with female
Working pressure 16 bar. Type LTW 50-100 for petroleum based products thread 51/2 DIN 11, other end male thread BSP or thread AVKI, dust plugs AVB, female couplings
(NBR lining), Type UTL 50-100 universal hose Type HB 50 -100 with helix. Suitable for hot bitumen according DIN 405 for foodstuffs up to 16 bar.
Hose fittings of brass / steel with ACME thread for quick coupling. - Rail car discharge coupling KWK with female thread AMKI. Made of aluminium,
(UPE lining). Good flexibility due to corrugations. and heavy fuel, -25 C up to + 200 C. Lining NBR.
LPG up to 25 bar. SPANNFIX or SPANNLOC clamps. Type VX...SS Type VC...SS with male thread or quick coupling. brass or stainless steel. W. P. max. 10 bar. Type DDC-M
W. P. 10 bar. Working pressure 7 bar.
Type UTS female
( hose unit )
Type CHS Type PCS Tank truck welding flanges TFA with pipe stop
Type SFC-SS ELAPAC - FD (also available in space saving square shape TQFA).
Type VKC...SS Type MKX...SS Flange sealing material free of plasticisers. Type TF without pipe stop. Made of steel or
-stainless steel- Type AVKC Type AMKX
Type SL Pipe connectors Suitable for tank truck and and tank installations, stamped aluminium.
for petroleum based products and many other
Flexible bronze pipe connectors with swiveling
Solvent hoses (EN 12115, TRbF) Foodstuff hoses (EN 12115, TRbF) - TW flange, aluminium -
media. Available as cut seals, sheets or coils. Type TFA
"Storz" hose couplings "Guillemin" hose couplings (EN 14420-8) oval flanges. For suction service, max. vaccuum
"BLUE BAND" "WHITE BAND" 0,9 bar. Type BWO standard. Type KW with
COAX hose assemblies (EN 13483, TRbF) STORZ hose couplings of aluminium. SPANNFIX or GUILLEMIN hose couplings of aluminium. SPANNFIX
Type LMD 9-25 without helix, LMS 25-150 with helix. Type LBD 25 without helix, LBS 50-100 with helix. Type SFC-TW cathodic protection.
For most solvents and paints, also water based. For all foodstuffs, milk, oils, fats, flour, molasses, COAX hose assemblies DN 21/ 8 for dispensers SPANNLOC clamps. Working pressure up to 10 bar. or SPANNLOC clamps. Working pressure up to 10 bar.
Tank truck flanges TGN, with threaded nipple,
Lining NBR blue, antistatic. W.P. 16 bar. dextrose and sirups. Lining NBR white, cover NBR/ with active vapour recovery. Cold flexible down Type BWO acc. DIN 28462. Of aluminium, brass or stain-
ELAFLEX 7.2006
PVC blue. W. P. 10 bar. to -30C (LT-Type -40C). W. P. 16 bar. heavy type for satu- less steel.
rated steam of steel,
Storz Guillemin zinc plated and chro-
mated. Clamps of Type TGN
Type LMS Type LBS Type COAX hot stamped brass.
Type SFS Type KW
Aircraft refuelling hoses (EN 1361, API 1529) Fuelling hoses without helix (EN 12115, TRbF) Fuel oil reel hose Hose fittings ferrule type (VG 95951/EN 14424) SPANNFIX hose fittings (DIN ISO 228, NPT) SPANNLOC hose fittings (DIN ISO 228, NPT) "TW" couplings (DIN 28450, EN 14420-6) Teflon PFA coating
"YELLOW BAND" "YELLOW BAND" Type XHD 32-50 without helix. Suitable for Female/ male hose fittings (ferrule type) with union Female/male hose fittings with re-usable SPANNFIX Female/male hose fittings with re-usable SPANNLOC Quick couplers acc. DIN 28450 - one hand tightening without tools, safe and leak-free connection. All stainless steel fittings, flanges and couplings
Types HD-C, Type HD 10-200 without helix, for reel operation. petroleum based products up to +65 C. Lining NBR nut, DN 13-25. Of brass, chrome plated brass or pinned safety clamps of hot stamped aluminium. bolted clamps of hot stamped aluminium. DN 13-100. For tankers and industrial applications. Sizes 2, 3 und 4. Of hot stamped brass (standard ), available with red coloured PFA coating for
VHD, PHD, TW-E. Suitable for all petroleum based products. Lining NBR. W. P. 16 bar. stainless steel. Also available as non-reusable DN 19-100. Working pressure up to 25 bar. Working pressure up to 25 bar. stainless steel or hot stamped aluminium. Dust plugs also of polyamide. Working pressure up to 16 bar. specially aggressive media.
W. P. 20 bar. NR-Type .
Suitable for all aviation
fuels. With NEON bands Type XHD
Type HD Type M
for improved visibility. Type MX Type MC Type VB-P
Type MB-Al
( dust cap ( dust plug
Specified by all major polyamide )
aluminium )
oil companies. LPG hoses (EN 1762) Type V
Lining NBR, working Tank truck hoses (EN 12115, TRbF) - brass - - brass -
"ORANGE BAND" Type ...SSE
pressure 20 bar.
"YELLOW BAND" Type LPG 10-100 without helix; type LPG 16 Accessories:
Type TW 19-200 with helix. Suitable for all petroleum for Autogas. Suitable for propane, butane and Type VX Type VC
anti-kinking sleeve KS 16 Type VK
based products. Lining NBR. Working pressure 16 bar. other L. P. gases. DVGW-approved. Lining NBR. colour sleeve CS 16
Type MK-SS
( male coupler ( female coupler
Working pressure 25 bar. brass with stainless steel w.
female thread) female thread ) DDC Dry Disconnect Couplings (STANAG 3756)
Universal tank hoses (EN 12115, TRbF) Type TW anti-kinking sleeve KS 21
colour sleeve CS 21
Self locking coupling, Mann Tek brand. For liquid
"BLUE-WHITE-BLUE" Type LPG
media or liquefied gas. Can be coupled up to 7 bar.
Type UTD 13-25 without helix, UTS 19-150 with helix. Type MC...SS Made of brass/bronze, aluminium or stainless steel.
Type MX...SS
Suitable for most chemical and petroleum based Working pressure PN 25 (PN 16 for aluminium).
products and solvents. Lining UPE white with Special types (DIN 405, EN 14422-7) Accessories for rail car tankers Camlock couplings (DIN 2828, EN 14420-7)
patented OHM conductive stripe.
Corrugated tanker hoses (EN 12115, TRbF)
Hot bitumen hoses (EN 13482, TRbF) Hose fittings of stainless steel with special thread -stainless steel- -stainless steel-
Rail car adapters KWZ one end with rail car Dust caps AMB, male couplings with female
Working pressure 16 bar. Type LTW 50-100 for petroleum based products thread 51/2 DIN 11, other end male thread BSP or thread AVKI, dust plugs AVB, female couplings
(NBR lining), Type UTL 50-100 universal hose Type HB 50 -100 with helix. Suitable for hot bitumen according DIN 405 for foodstuffs up to 16 bar.
Hose fittings of brass / steel with ACME thread for quick coupling. - Rail car discharge coupling KWK with female thread AMKI. Made of aluminium,
(UPE lining). Good flexibility due to corrugations. and heavy fuel, -25 C up to + 200 C. Lining NBR.
LPG up to 25 bar. SPANNFIX or SPANNLOC clamps. Type VX...SS Type VC...SS with male thread or quick coupling. brass or stainless steel. W. P. max. 10 bar. Type DDC-M
W. P. 10 bar. Working pressure 7 bar.
Type UTS female
( hose unit )
Type CHS Type PCS Tank truck welding flanges TFA with pipe stop
Type SFC-SS ELAPAC - FD (also available in space saving square shape TQFA).
Type VKC...SS Type MKX...SS Flange sealing material free of plasticisers. Type TF without pipe stop. Made of steel or
-stainless steel- Type AVKC Type AMKX
Type SL Pipe connectors Suitable for tank truck and and tank installations, stamped aluminium.
for petroleum based products and many other
Flexible bronze pipe connectors with swiveling
Solvent hoses (EN 12115, TRbF) Foodstuff hoses (EN 12115, TRbF) - TW flange, aluminium -
media. Available as cut seals, sheets or coils. Type TFA
"Storz" hose couplings "Guillemin" hose couplings (EN 14420-8) oval flanges. For suction service, max. vaccuum
"BLUE BAND" "WHITE BAND" 0,9 bar. Type BWO standard. Type KW with
COAX hose assemblies (EN 13483, TRbF) STORZ hose couplings of aluminium. SPANNFIX or GUILLEMIN hose couplings of aluminium. SPANNFIX
Type LMD 9-25 without helix, LMS 25-150 with helix. Type LBD 25 without helix, LBS 50-100 with helix. Type SFC-TW cathodic protection.
For most solvents and paints, also water based. For all foodstuffs, milk, oils, fats, flour, molasses, COAX hose assemblies DN 21/ 8 for dispensers SPANNLOC clamps. Working pressure up to 10 bar. or SPANNLOC clamps. Working pressure up to 10 bar.
Tank truck flanges TGN, with threaded nipple,
Lining NBR blue, antistatic. W.P. 16 bar. dextrose and sirups. Lining NBR white, cover NBR/ with active vapour recovery. Cold flexible down Type BWO acc. DIN 28462. Of aluminium, brass or stain-
ELAFLEX 7.2006
PVC blue. W. P. 10 bar. to -30C (LT-Type -40C). W. P. 16 bar. heavy type for satu- less steel.
rated steam of steel,
Storz Guillemin zinc plated and chro-
mated. Clamps of Type TGN
Type LMS Type LBS Type COAX hot stamped brass.
Type SFS Type KW
Aircraft refuelling hoses (EN 1361, API 1529) Fuelling hoses without helix (EN 12115, TRbF) Fuel oil reel hose Hose fittings ferrule type (VG 95951/EN 14424) SPANNFIX hose fittings (DIN ISO 228, NPT) SPANNLOC hose fittings (DIN ISO 228, NPT) "TW" couplings (DIN 28450, EN 14420-6) Teflon PFA coating
"YELLOW BAND" "YELLOW BAND" Type XHD 32-50 without helix. Suitable for Female/ male hose fittings (ferrule type) with union Female/male hose fittings with re-usable SPANNFIX Female/male hose fittings with re-usable SPANNLOC Quick couplers acc. DIN 28450 - one hand tightening without tools, safe and leak-free connection. All stainless steel fittings, flanges and couplings
Types HD-C, Type HD 10-200 without helix, for reel operation. petroleum based products up to +65 C. Lining NBR nut, DN 13-25. Of brass, chrome plated brass or pinned safety clamps of hot stamped aluminium. bolted clamps of hot stamped aluminium. DN 13-100. For tankers and industrial applications. Sizes 2, 3 und 4. Of hot stamped brass (standard ), available with red coloured PFA coating for
VHD, PHD, TW-E. Suitable for all petroleum based products. Lining NBR. W. P. 16 bar. stainless steel. Also available as non-reusable DN 19-100. Working pressure up to 25 bar. Working pressure up to 25 bar. stainless steel or hot stamped aluminium. Dust plugs also of polyamide. Working pressure up to 16 bar. specially aggressive media.
W. P. 20 bar. NR-Type .
Suitable for all aviation
fuels. With NEON bands Type XHD
Type HD Type M
for improved visibility. Type MX Type MC Type VB-P
Type MB-Al
( dust cap ( dust plug
Specified by all major polyamide )
aluminium )
oil companies. LPG hoses (EN 1762) Type V
Lining NBR, working Tank truck hoses (EN 12115, TRbF) - brass - - brass -
"ORANGE BAND" Type ...SSE
pressure 20 bar.
"YELLOW BAND" Type LPG 10-100 without helix; type LPG 16 Accessories:
Type TW 19-200 with helix. Suitable for all petroleum for Autogas. Suitable for propane, butane and Type VX Type VC
anti-kinking sleeve KS 16 Type VK
based products. Lining NBR. Working pressure 16 bar. other L. P. gases. DVGW-approved. Lining NBR. colour sleeve CS 16
Type MK-SS
( male coupler ( female coupler
Working pressure 25 bar. brass with stainless steel w.
female thread) female thread ) DDC Dry Disconnect Couplings (STANAG 3756)
Universal tank hoses (EN 12115, TRbF) Type TW anti-kinking sleeve KS 21
colour sleeve CS 21
Self locking coupling, Mann Tek brand. For liquid
"BLUE-WHITE-BLUE" Type LPG
media or liquefied gas. Can be coupled up to 7 bar.
Type UTD 13-25 without helix, UTS 19-150 with helix. Type MC...SS Made of brass/bronze, aluminium or stainless steel.
Type MX...SS
Suitable for most chemical and petroleum based Working pressure PN 25 (PN 16 for aluminium).
products and solvents. Lining UPE white with Special types (DIN 405, EN 14422-7) Accessories for rail car tankers Camlock couplings (DIN 2828, EN 14420-7)
patented OHM conductive stripe.
Corrugated tanker hoses (EN 12115, TRbF)
Hot bitumen hoses (EN 13482, TRbF) Hose fittings of stainless steel with special thread -stainless steel- -stainless steel-
Rail car adapters KWZ one end with rail car Dust caps AMB, male couplings with female
Working pressure 16 bar. Type LTW 50-100 for petroleum based products thread 51/2 DIN 11, other end male thread BSP or thread AVKI, dust plugs AVB, female couplings
(NBR lining), Type UTL 50-100 universal hose Type HB 50 -100 with helix. Suitable for hot bitumen according DIN 405 for foodstuffs up to 16 bar.
Hose fittings of brass / steel with ACME thread for quick coupling. - Rail car discharge coupling KWK with female thread AMKI. Made of aluminium,
(UPE lining). Good flexibility due to corrugations. and heavy fuel, -25 C up to + 200 C. Lining NBR.
LPG up to 25 bar. SPANNFIX or SPANNLOC clamps. Type VX...SS Type VC...SS with male thread or quick coupling. brass or stainless steel. W. P. max. 10 bar. Type DDC-M
W. P. 10 bar. Working pressure 7 bar.
Type UTS female
( hose unit )
Type CHS Type PCS Tank truck welding flanges TFA with pipe stop
Type SFC-SS ELAPAC - FD (also available in space saving square shape TQFA).
Type VKC...SS Type MKX...SS Flange sealing material free of plasticisers. Type TF without pipe stop. Made of steel or
-stainless steel- Type AVKC Type AMKX
Type SL Pipe connectors Suitable for tank truck and and tank installations, stamped aluminium.
for petroleum based products and many other
Flexible bronze pipe connectors with swiveling
Solvent hoses (EN 12115, TRbF) Foodstuff hoses (EN 12115, TRbF) - TW flange, aluminium -
media. Available as cut seals, sheets or coils. Type TFA
"Storz" hose couplings "Guillemin" hose couplings (EN 14420-8) oval flanges. For suction service, max. vaccuum
"BLUE BAND" "WHITE BAND" 0,9 bar. Type BWO standard. Type KW with
COAX hose assemblies (EN 13483, TRbF) STORZ hose couplings of aluminium. SPANNFIX or GUILLEMIN hose couplings of aluminium. SPANNFIX
Type LMD 9-25 without helix, LMS 25-150 with helix. Type LBD 25 without helix, LBS 50-100 with helix. Type SFC-TW cathodic protection.
For most solvents and paints, also water based. For all foodstuffs, milk, oils, fats, flour, molasses, COAX hose assemblies DN 21/ 8 for dispensers SPANNLOC clamps. Working pressure up to 10 bar. or SPANNLOC clamps. Working pressure up to 10 bar.
Tank truck flanges TGN, with threaded nipple,
Lining NBR blue, antistatic. W.P. 16 bar. dextrose and sirups. Lining NBR white, cover NBR/ with active vapour recovery. Cold flexible down Type BWO acc. DIN 28462. Of aluminium, brass or stain-
ELAFLEX 7.2006
PVC blue. W. P. 10 bar. to -30C (LT-Type -40C). W. P. 16 bar. heavy type for satu- less steel.
rated steam of steel,
Storz Guillemin zinc plated and chro-
mated. Clamps of Type TGN
Type LMS Type LBS Type COAX hot stamped brass.
Type SFS Type KW
ERV - G
"YELLOW BAND"
ERV high quality expansion joints by ELAFLEX / ContiTech. With swiveling flanges, DN 25 -1000.
ERV - R
"RED BAND"
ERV - GR
"GREEN BAND"
ZVA Slimline (EN 13012, TRbF 513, PTB, ATEX)
Nozzles by ELAFLEX / Hiby : ergonomic design, long life, fully serviceable.
ZVA 200 GR (EN 13012, TRbF 513, PTB, ATEX) Corrosion resistant automatic nozzles ZV 19 / ZV 25
Automatic nozzle for active vapour recovery. Automatic nozzles in special construction of Manually operated nozzle for gasoline, diesel, fuel oil:
Suitable for all standard gasoline fuels, up to 45 l/min. gunmetal, bronze or stainless steel. Suitable for ZV 19 (DN 19) up to 100 l/min.; ZV 25 (DN 25) up
ERV - GS ROTEX Special Flanges Working pressure 0,5 up to 3,5 bar. - Design "GRV3" solvents, alcohols and chemicals. to 140 l/min. Working pressure up to 3,5 bar.
with integrated vapour valve "On / Off" GV3, Special types for chemicals available.
"YELLOW STEEL" "ROTEX" Standard flanges made of steel, zinc plated Design "GRVP" with vapour proportional valve GVP.
Similar to type ERV-G, but suitable for perma- For permanent stress through hot heating water, and yellow chromated, acc. DIN. Other flange
nent high temperatures (max. +100C at 10 bar). cooling water and hot air. Working pressure 10 bar standards and materials available, e.g.:
Flame resistant according to Germanischer Lloyd. up to 100C, 6 bar up to 110C. Used as safety Type ZVA 200 GR Type ZVA - VA Type ZV 19
Lining NBR. compensator in heating installations acc. DIN.
Lining EPDM.
With small diameter
TW flanges of forged
aluminium PN10
Type TW
Type ERV-GS Type ROTEX
Nozzles for aircraft refuelling ZVA for AdBlue according DIN 70070 Safety Breaks (EN 13617-2, ATEX)
With control rods
(tied flanges) Manually operated nozzles for overwing refuelling. Automatic nozzle ZVA of nickel plated aluminium Self-closing safety break couplings for nozzles,
Type ZS Suitable for Avgas and Jet fuels. ZVF 25 up to for urea solution (AdBlue), DN 15. Working pressure reusable. - For the protection of dispenser, hose
140 l/min, working pressure 3,5 bar. ZVF 40 up to 0,5 up to 3,5 bar. Spout with magnet opening; assembly and car in case of drive-off incidents.
400 l/min, nominal pressure PN 10. Refuelling only possible with ELAFIX 40 magnet Petrol + Chemical Hoses Hose Fittings
adapter within vehicle filler neck.
ERV - OR ERP SSB 16 PSB
With non-swivelling
"ORANGE BAND" "RED SPOT" SAE flanges for Type ZVA AdBlue
For liquid petroleum gas (LPG tank trucks and refuel- For sanitary facilities, cold and warm water, swimming hydraulic oil systems
ling stations). Temperature range -30C up to +70C. pool water, sea water, drinking water. Highly flexible
Max. working pressure 25 bar, burst pressure and low own resistance. Working pressure max. Type ZVF 25
>100 bar. Lining NBR. 10 bar. Lining Butyl/EPDM. CSB 21
ELAFIX 40
Accessories
SSB 25
Type ERV-OR Type ERP Type ZVF 40
Inner sleeve
Bulk delivery nozzles
EKG
of stainless steel, Manually operated fuel oil nozzles DN 32 - 50,
e.g. for granulates
types ZV 400/ 500 and ZH 35/ 50. Available either
with fixed spout or TW coupling. Flow rates 250 - 650
Nozzles + Accessories
GKG
l/min, nominal pressure PN 10.
ZRS 38-J SSB 32
ERV - G
"YELLOW BAND"
ERV high quality expansion joints by ELAFLEX / ContiTech. With swiveling flanges, DN 25 -1000.
ERV - R
"RED BAND"
ERV - GR
"GREEN BAND"
ZVA Slimline (EN 13012, TRbF 513, PTB, ATEX)
Nozzles by ELAFLEX / Hiby : ergonomic design, long life, fully serviceable.
ZVA 200 GR (EN 13012, TRbF 513, PTB, ATEX) Corrosion resistant automatic nozzles ZV 19 / ZV 25
Automatic nozzle for active vapour recovery. Automatic nozzles in special construction of Manually operated nozzle for gasoline, diesel, fuel oil:
Suitable for all standard gasoline fuels, up to 45 l/min. gunmetal, bronze or stainless steel. Suitable for ZV 19 (DN 19) up to 100 l/min.; ZV 25 (DN 25) up
ERV - GS ROTEX Special Flanges Working pressure 0,5 up to 3,5 bar. - Design "GRV3" solvents, alcohols and chemicals. to 140 l/min. Working pressure up to 3,5 bar.
with integrated vapour valve "On / Off" GV3, Special types for chemicals available.
"YELLOW STEEL" "ROTEX" Standard flanges made of steel, zinc plated Design "GRVP" with vapour proportional valve GVP.
Similar to type ERV-G, but suitable for perma- For permanent stress through hot heating water, and yellow chromated, acc. DIN. Other flange
nent high temperatures (max. +100C at 10 bar). cooling water and hot air. Working pressure 10 bar standards and materials available, e.g.:
Flame resistant according to Germanischer Lloyd. up to 100C, 6 bar up to 110C. Used as safety Type ZVA 200 GR Type ZVA - VA Type ZV 19
Lining NBR. compensator in heating installations acc. DIN.
Lining EPDM.
With small diameter
TW flanges of forged
aluminium PN10
Type TW
Type ERV-GS Type ROTEX
Nozzles for aircraft refuelling ZVA for AdBlue according DIN 70070 Safety Breaks (EN 13617-2, ATEX)
With control rods
(tied flanges) Manually operated nozzles for overwing refuelling. Automatic nozzle ZVA of nickel plated aluminium Self-closing safety break couplings for nozzles,
Type ZS Suitable for Avgas and Jet fuels. ZVF 25 up to for urea solution (AdBlue), DN 15. Working pressure reusable. - For the protection of dispenser, hose
140 l/min, working pressure 3,5 bar. ZVF 40 up to 0,5 up to 3,5 bar. Spout with magnet opening; assembly and car in case of drive-off incidents.
400 l/min, nominal pressure PN 10. Refuelling only possible with ELAFIX 40 magnet Petrol + Chemical Hoses Hose Fittings
adapter within vehicle filler neck.
ERV - OR ERP SSB 16 PSB
With non-swivelling
"ORANGE BAND" "RED SPOT" SAE flanges for Type ZVA AdBlue
For liquid petroleum gas (LPG tank trucks and refuel- For sanitary facilities, cold and warm water, swimming hydraulic oil systems
ling stations). Temperature range -30C up to +70C. pool water, sea water, drinking water. Highly flexible
Max. working pressure 25 bar, burst pressure and low own resistance. Working pressure max. Type ZVF 25
>100 bar. Lining NBR. 10 bar. Lining Butyl/EPDM. CSB 21
ELAFIX 40
Accessories
SSB 25
Type ERV-OR Type ERP Type ZVF 40
Inner sleeve
Bulk delivery nozzles
EKG
of stainless steel, Manually operated fuel oil nozzles DN 32 - 50,
e.g. for granulates
types ZV 400/ 500 and ZH 35/ 50. Available either
with fixed spout or TW coupling. Flow rates 250 - 650
Nozzles + Accessories
GKG
l/min, nominal pressure PN 10.
ZRS 38-J SSB 32