Академический Документы
Профессиональный Документы
Культура Документы
STANDARD 8813
First edition
1992-02-l 5
Reference number
IS0 8813:1992(E)
IS0 8813:1992(E)
Th
Foreword
is
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
nt
0 IS0 1992
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Gen&ve 20 l Switzerland
Printed in Switzerland
ii
INTERNATIONAL STANDARD IS0 8813:1992(E)
method of calculating, and a test method for vali- IS0 7131:1984, Earth-moving machinery - Loaders
dating, rated lift capacity as presented in commer- - Terminology and commercial specifications.
nt
3 Definitions
This International Standard applies to machines
For the purposes of this International Standard, the
w
IS0 6747 and IS0 7131. taching equipment applied at the load hook. See
figures 1 and 2.
ra
The following standards contain provisions which, 3.3 outrigger: Extendable or fixed arm attached to
by
through reference in this text, constitute provisions the base machine which rests on the supporting
of this International Standard. At the time of publi- surface and defines the tipping line. See figures 7
cation, the editions indicated were valid. All stan- and 8.
EV
1) To be published.