Академический Документы
Профессиональный Документы
Культура Документы
ai 1 11/07/2012 14:58:26
Subsidiaries
France Runion Island Belgium
ETANCO Le Pecq RFIX ETANCO Benelux
Head office + 0262 430 880 + 32 3 354 15 00
info@r-fix.com info@etanco.be
GENERAL CATALOGUE
International Sales Italia United Kingdom
GENERAL CATALOGUE
TEL : +33 1 34 80 52 08
FAX : +33 1 34 80 52 40 SI.COP s.r.l. FRIULSIDER UK LTD
export@etanco.fr +39 02 990 480 62 + 01792 561911
info@sicopsrl.com sales@friulsider.co.uk
Production sites
France
Aubergenville (78) x 2
Magnac-bourg (87)
Saint Germain-Les-Belles (87)
Italia
San Giovanni
Catalogues Booklets
Cladding Wood Anchors Roofing Waterproofing Facade Structural works Safety Solar Over-roofing
EN 14592:2009
Code : 510 561 000
EN 14592:2009
www.etanco.eu
2_3-couv-en.ai 1 11/07/2012 15:03:21
Swansea Germany commercial document are given as an indication and non-biding document. The
supplier reserves the right to make any modification according to the necessity of the
which they are delivered.
Brussels moment or improvement of the fabrication. 11 - Liability : The Suppliers liability shall be strictly limited to respecting the specifi-
Belgium cations set by the Client and accepted by the Supplier. The Supplier shall be
5 - Characteristics and status of the goods ordered : The Client shall be responsible responsible for performing the work requested by the Client in keeping with the
Czech Republic for using the goods under normal and foreseeable conditions of use and in standards of its profession. The Supplier shall not be liable for : Faults or defects
accordance with the rules and regulations governing health and safety and the arising from materials supplied by the Client, faults or defects arising from a design
working environment that must prevail at the place of use as well as the best created by the Client, faults or defects arising wholly or partly from normal wear and
practises in its profession. The packaging, for which no deposit is charged, will not be tear of any parts, or from damage or accidents caused by the Client or by the third
retrieved by the supplier. All packaging shall meet the applicable environmental rules parties, any abnormal or unusual use of the goods or any use of the same which
and regulations depending on the stated purpose of the goods. The Client pledges to does not comply with the stated purpose of the goods, with common practice or with
dispose of the packaging in keeping with the prevailing local environment regula- the Suppliers guidelines or recommendations, any loss of traceability of the goods
Roumania tions. The Client pledges to provide all useful information concerning the use of the by the Client. The Suppliers liability shall be limited to direct tangible damage
goods to any person to whom the goods are resold. The Supplier shall ensure that caused to the Clients as a result of a faulty or defective performance of the contract
the goods are traceable until they are delivered to the Client. by the Supplier. The Supplier shall not be liable for damage arising from the Clients
Italia Bucharest use of technical documents, conformation or data originating from the Client or
6. - Intellectual property and confidentiality : All intellectual property rights as well as imposed by the latter. Under no circumstances shall be the Supplier be liable for
any know-how that is contained in or discloses by the documents which are compensating any indirect or intangible damage such as: loss of production, loss of
disclosed, the goods which are delivered and the services which are provided, shall earnings, loss of opportunity, commercial damage, and loss of revenue. Should any
remain the exclusive property of the Supplier. The parties hereby mutually pledge to specific penalties and/or compensation have been agreed by the parties beforehand,
abide by a general obligation of confidentiality in connection with any elements which these shall be deemed to constitute full and final compensation to the exclusion of
Barcelona
are exchanged between them as part of the preparation and performance of the any other remedy or compensation. The Suppliers civil liability for all causes shall be
contract (such as documents whatever the medium on which they are recorded, limited to a sum of money amounting to the sale price of the batch which the
Spain minutes and reports of discussions held between the parties, blueprints, exchanges defective part formed part of. The Client hereby guarantees the Supplier that it has
of computer data, etc.). These provisions shall not impede the Suppliers right to secured an undertaking from its insurers and from third parties with whom it
freely use its own know-how and technology developed as part of the performance of maintains a contractual relationship not to bring claims against the Supplier or its
the contract unless the parties specifically agree otherwise. The Client hereby insurers in excess of the abovementioned limits and exceptions.
warrants that at the time of the signature of the contract the content of the blueprints
and of the specifications and the conditions governing their implementation do not 12 - Applicable law-Settlement of disputes : Should the parties be unable to settle
rely on intellectual property rights or know-how belonging to third parties. The Client any disputes that arise between them amicably, it is expressly agreed that any
hereby guarantees the Supplier against the direct or indirect consequences of any dispute which arises in connection with this contract shall be dealt with under
Head office civil liability or criminal proceedings which might be brought against the Supplier, French law and shall be submitted to the exclusive jurisdiction of the courts of
Reunion Island such as lawsuits for infringement of intellectual property rights or unfair competition the place where the Suppliers domicile is located, even in case of an appeal or
Subsidiaries
for instance. joint and several defendants.
Productions sites
1 WOOD SCREW - LAG SCREW - NAIL
2 SPECIAL FASTENER
2-2 Self-Tapping Screw (with pre-drilling of support)
4 ANCHOR
6 ROOFING ACCESSORY
9 INTERIOR INSULATION
10 OVER-ROOFING SYSTEM
11 SAFETY SYSTEM
12 FACADE SYSTEM
13 TOOL
14 THE COMPANY
ALPHABETICAL INDEX
Page Page
Page Page
Page Page
Page Page
FAST CHARGER FEIN / MILWAUKEE 656 - 700 FULLY THREADED ROD 290
FASTO 233 G 174 FUNERAL MONUMENT ATTACHMENT 640
FASTO DF 176
FASTO TF 2036 148 G
FASTO TF 2036 DF 152 GALVASPRAY 367
FASTO-INOX / A 164 GLR PU 454
FASTO-INOX / B 166 GLR PURFOAM 455
FASTOR 2043 173 GLUE AKEMI / AKEPOX 639
FASTOR-INOX 168 GLUE ETANCOL 415
FASTOVIS DF 131 GLUE SYSTEM 639
FASTOVIS FC 120 GOLDINOX 66
FASTOVIS TB 112 GOLDINOX WOOD 66
FASTOVIS TF 3036 149 GOLDOFAST WOOD 126
FASTOVIS TF 3036 DF 153 GOLDOVIS 124
FASTOVIS TH 116 GOLDOVIS SPIRAL 125
FASTOVIS WOOD DF 134 GOLDOVIS WOOD 127
FASTOVIS WOOD TH 122 - 123 GRADED PULL-OUT TESTER 704
FASTOVIS WOOD TT 158 GRAVEL STOP 402
FAT 106 GRECA WASHER 410
FAT 2000 TS 109 GRECALCOALU 374
FAT WOOD 108 GRIFCO 520
FEIN POWER TOOL 651 to 656 GRILLCO 414
FEMALE METAL ANCHOR 242 to 253 GRINDER & DISK 689 - 690
FEMALE RING 282 GRISBY 90 / 180 602
GRISBY GM / PM 601
FEMALE TAPPED SOCKET for CHIMFORT
GREEN 265 GRISBY SIMPLE 603
FILLER SEALANT 449 GUN 18V MASTIC 703
FILLER TRIP M0 426 - 427 GUN for CHIMFORT CARTRIDGE 701 - 702
FINISHING PROFILE 607 - 608 GUN for MASTIC CARTRIDGE 703
FIREBREAK SEALANT 429 - 430 GUN MOUSSAFEU 430
FIXING on TOP of CORRUGATION - ROOFING 318 to 383 GUN SET for CHIMFORT 701
FIXTEC NUT 689
FLASHCO 397 H
FLAT WASHER 503 HAMMER DRILL & BIT 678 to 688
FLATTENED ROD 633 HAMMER DRIVE LAG BOLT 47
FLEXIBLE ADHESIVE BAND 629 HANGER ROCKAFIX 516
FLEXIBLE FLASHING 397 HANGER THERMOFIX 517
FM-WOOD PRO TF TX 28 HARD WOOD TC TX 33
FOOT LR SAUVGUARD 566 HARPON 528
FORK SPACER 646 HEMA 238
FORMWORK INSULATION FIXING 526 - 527 HEX SLEEVE 291
FRAME & FRAMEWORK ANCHOR 220 - 221 HEX. NUT with TOOTHED BASE 554
FRAME or FRAMEWORK SCREW 218 - 219 HIGH PERFORMANCE THERMAL BARRIER
SYSTEM 462 - 463
FRAPCO 253
HIGH PERFORMANCE THERMAL BARRIER
FRICTION ANCHOR 239 SYSTEM - PRE-ASSEMBLED 475 to 486
FRP 262 HOOKED ROD RAPCO 521
Page Page
I LBT 1 47
IMPACT WRENCH DRIVE 657 LBT 2 44
INCO Black 273 - 274 LBT 3 45
INDIVIDUAL SAFETY 580 to 590 LEAF STOP 400
INSULATION FIXING for RURAL BUILDING 512 to 514 LIFELINE 571 to 579
INSULATION FIXING in LOFT 516 - 517 LIGHT INSULATION ACCESSORY 646
INSULATION FIXING UNDER the ROOF 515 LINTEL HOOK 645
INSULATION FROM the INSIDE 512 to 528 LIP SEAL 606
INVERTED C RAIL 624 LOAD SHOCK ABSORBER SECURIT-LINE 577
INVISIBLE FIXING SYSTEMS 624 - 625 LOCKING CLAMP 394
ISOBAR LR 5 / 20 / 39 672
Roong overview / Saddle washer / Closer 328 LR 83 676
ISOCAB LR BRICK 641 to 643
Roong overview / Saddle washer / Closer 330
LR COL 454
ISODRILL TH DF 67
LR CRYL 453
ISODRILL TT 74
LR SAUVGUARD - BALLAST 568
ISOLCO 3000 P 598 - 599
LR SAUVGUARD - BASEBOARD & ACCESSORY 569
ISOPAN
Roong overview / Saddle washer / Closer 332 LR SAUVGUARD - COMMON PARTS 567
ISO-RG 279 LR SAUVGUARD - FACFIX / TOPFIX / ZEDFIX 566
ITE ANCHOR 273 to 279 LR SAUVGUARD - FITING KIT 569
LR SAUVGUARD - FOOT 566
J LR SIL 402 452
JAW ACCUBIRD / POWERBIRD 674 - 675 LR SOL IN 446
JAW LR 5 / 20 / 39 / 83 672 LR STONE 453
JOINTAFEU 429 LR SYLOMER 428
JORAN DRILL BIT 688 LR WATER SEAL 450
JORIS IDE - Roong overview / Saddle washer / LR WATERJOINT 451
Closer 334 LRC / LRC ECO 441 to 443
LUG 634
K
KALZIP
Roong overview / Saddle washer / Closer 354
M
MALE RING 282
KINGSPAN
Roong overview / Saddle washer / Closer 336 MANDATORY RATING PLATE 579
KIT BULB-TITE 394 MARCOVIS FM-TXT PZ 3 226
KIT FLASHCO 397 MARCOVIS FM-X5 232 to 234
KIT POD-CORE & CABLE CLAMP 578 MARCOVIS MP 227 to 229
KIT ZACROVIS 1 394 MARCOVIS TUP4 230 - 231
KJ 28 CLAMP 676 MASONRY LINING SYSTEM
for RENOVATION PROJECT 644 - 645
KONSOL 599
MASON'S KIT 640
L MASTIC CARTRIDGE 450 to 455
MASTIC LR 450 to 455
L CORNER SLEEVE 389
MAX ISO - FM-ISOMAX 277
LAG SCREW 43 to 45
METAL IMPACT NAIL ANCHOR 236 - 237
LASER 2 692
METAL SLEEVE for CHIMFORT GREEN 265
LATTONEDIL
Roong overview / Saddle washer / Closer 338 METAL-ISO 278
Page Page
Page Page
Page Page
Page Page
Page Page
Fastener for
I beam, thickness
metal sheet
4 to 15 mm
roofing
Fastener for
Cold shaped panel,
sandwich panel
thickness 1.5 to 4 mm
roofing
Fastener for
ZED shaped panel,
fibre-cement
thickness 1.5 to 3 mm
roofing G.O.
Fastener for
Cladding
corrugated
panel
roofing P.O.
Fastener for
Assembly tile panel
roofing
Fastener for
Wood
slate roofing
Solid concrete
Steel sheet
block
Natural Punched
stone steel sheet
Hollow Insulation
concrete block on steel sheet
Hollow Waterproofing
brick on steel sheet
Plaster Waterproofing
block on bitumen
Insulation on
Plasterboard drilled or punched
steel sheet
Waterproofing on
With prior
drilled or punched
testing
steel sheet
Reglementation
Aluminium
Compliance with Standard NF :
sheet roofing
Waterproofing of terrace
Prefabricated accessories for
roofs with elements bearing
cover safety hooks
masonry
Approved by a
(Technical evaluation
QUALICONSULT
European systems fixed
new technology
sealing mechanically)
Approved by
Fire Resistance SOCOTEC
specifications
Mounted after
Fitted with an
pre-drilling
electric screwdriver
the base
Fitted with an
electric screwdriver No drilling support
and hex. bit
Method of installation
Fitted with an
Automatic standing
electric screwdriver
fitting
and Phillips bit
Product
"Walk resistant"
in compliance with
Environmentaly friendly
standard XP P 30-317
& ETAG 006
To access all
of our downloads
Register !
EN 14592:2009
CHAPTER 1
Wood screw 24 to 42
Lag screw 43 to 46
Hammer drive lag bolt 47
Nail 48 to 51
1 - 1 Wood screw 24 to 42
STAINLESS STEEL A2 / A4 24 to 31 24 25 26 28 29 31 32 33 34 35 40 41
SHERARDIZED STEEL 31
CARBON STEEL 41 - 42
1 - 2 Lag screw 43 to 46
STAINLESS STEEL A2 43 43 43 44 45 46
SHERARDIZED STEEL 43
CARBON STEEL 45 - 46
1 - 4 Nail 48 to 51
STAINLESS STEEL A4 48 48 48 48 49 50 50 51 51 51
CARBON STEEL 50 - 51
: Diameter on thread
CS : Tightening capacity
= Thickness to clamp
PA : Anchoring depth
= Length of the penetration into the wood
Wooden support
Head L H L
Lf Lf
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Torx n 20 (code 325 090), voir page 663 - Power screwdrivers, see page 654
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Torx n 20 (code 325 090), voir page 663 - Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length - Head : Head outside diameter
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Torx n 20 (code 325 090), voir page 663 - Power screwdrivers, see page 654
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Pozidriv No. 2 (code 325 010), see page 663 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - Pattern : Bit drive recess - L : Length
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Pozidriv No. 2 (code 325 010), see page 663 - Power screwdrivers, see page 654
Roong application:
- Fastening roof ridges onto timber (without pre-drilling in the wood)
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Torx No. 25 (code 325 100), see page 663 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - Pattern : Bit drive recess - L : Length - PAmini : Minimum anchorage depth in support
VBU TB / SS A2
Facade application:
- Fastening of secondary metal framework (with pre-drilling) onto a timber framework
Application:
- Fastener for attaching metal to wood
Cross references :
Drill bits, HSS, see page 669 - Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Pozidriv No. 3 pattern (code 325 030), see page 663 - Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length
EN 14592:2009
FM-WOOD PRO TF TX / SS A2
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bits: Torx 30 (code 325 115) / Torx 40 (code 325 120), see page 663
Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length - Lf : Threaded length - Head : Head outside diameter
EN 14592:2009
WOOD SCREW HD TF TX / SS
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bits: Torx 25 (code 325 100), see page 663 - Power screwdrivers, see page 654
EN 14592:2009
WOOD SCREW HD TFB TX / SS
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bits: Torx 25 (code 325 100) see page 663 - Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length
Special high hardness stainless steel screw for hard wood. With detent locking, cutting strip, counter sinking
for tting without pre-drilling, no splitting and with excellent resistance to tearing.
Application:
- Terrace fastening on exotic wood frames (Ip, Bangkirai, Teak)
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bits: Torx 25 (code 325 100), see page 663 - Power screwdrivers, see page 654
8,10
Special high hardness stainless steel screw for hard wood. With detent locking, cutting strip, counter sinking
for tting without pre-drilling, no splitting and with excellent resistance to tearing.
Application:
- Terrace fastening on exotic wood frames (Ip, Bangkirai, Teak)
- An ideal fastener for a clean nish
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bits: Torx 25 (code 325 100) see page 663 - Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length
VBU TF / SS A2
4 x 16 8 PZ 2 200 30 050
4 x 20 8 PZ 2 200 30 055
4 x 25 8 PZ 2 200 30 060
4 x 30 8 PZ 2 200 30 065
4 x 35 8 PZ 2 200 30 070
4 x 40 8 PZ 2 200 30 075
4 x 45 8 PZ 2 200 30 080
4 x 50 8 PZ 2 200 30 085
4 x 60 8 PZ 2 200 30 090
4 x 70 8 PZ 2 200 30 095
4 x 80 8 PZ 2 200 30 097
5 x 20 10 PZ 2 200 30 125
5 x 25 10 PZ 2 200 30 130
5 x 30 10 PZ 2 200 30 135
5 x 35 10 PZ 2 200 30 145
5 x 40 10 PZ 2 200 33 020
5 x 45 10 PZ 2 200 30 150
5 x 50 10 PZ 2 200 30 153
5 x 60 10 PZ 2 200 30 157
5 x 70 10 PZ 2 200 30 165
5 x 80 10 PZ 2 100 30 167
5 x 90 10 PZ 2 100 30 168
5 x 100 10 PZ 2 100 30 172
5 x 110 10 PZ 2 100 30 176
6 x 30 12 PZ 3 100 30 170
6 x 40 12 PZ 3 100 33 050
6 x 50 12 PZ 3 100 30 180
6 x 60 12 PZ 3 100 30 185
continued on next page
VBU TF / SS A2
Application:
- A fastener for wood on wood assemblies
Other material available:
- Carbon steel yellow coating, see page 35
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bits: Torx 40 (code 325 120) / Torx 30 (code 325 115), see page 663
Power screwdrivers, see page 654
SHERARDIZED STEEL
CHIPBOARD SCREWS - 90 POZIDRIV COUNTERSINK HEAD
Sherardized steel
VBU TF / SH
Facade application:
- Fastening timber joists to ISOLCO 3000 P brackets, see our FACADE booklet
10
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Phillips Pozidriv No. 2 pattern, see page 663
Drill bit, HSS double-edged cutting (code 282 950), see page 670
Pattern : Bit drive recess - L : Length - Head : Head outside diameter
EN 14592:2009
STARKING TX / 2C
Lf
Cross references :
Recessed washers, see page 504
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit: Torx 40 (code 325 120), see page 663 - Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length - Lf : Threaded length - Head : Head outside diameter
EN 14592:2009
HARD WOOD TC TX / ZBJ
Cross references :
Washers, recessed, see page 504
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bits: Torx 40 (code 325 120) / Torx 30 (code 325 115), see page 663
Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length - Lf : Threaded length - Head : Head outside diameter
EN 14592:2009
SUPER WOOD TH TX / ZBJ
10 x 80 52 15 TX 40 50 33 360
10 x 90 52 15 TX 40 50 33 362
10 x 100 80 15 TX 40 50 33 364
10 x 120 80 15 TX 40 50 33 366
10 x 140 80 15 TX 40 50 33 368
10 x 160 80 15 TX 40 50 33 370
Lf 50 33 372
10 x 180 80 15 TX 40
10 x 200 80 15 TX 40 50 33 374
10 x 220 100 15 TX 40 50 33 376
10 x 240 100 15 TX 40 50 33 378
10 x 260 100 15 TX 40 50 33 380
10 x 280 100 15 TX 40 50 33 382
10 x 300 100 15 TX 40 50 33 384
10 x 320 100 15 TX 40 50 33 386
10 x 340 100 15 TX 40 50 33 388
10 x 360 100 15 TX 40 50 33 390
10 x 380 100 15 TX 40 50 33 392
10 x 400 100 15 TX 40 50 33 394
Cross references :
Washers, recessed, see page 504
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit: Torx 40 (code 325 120), see page 663 - Hex head nutsetters, see page 662
Power screwdrivers, see page 654
Pattern : Bit drive recess - H : Hex. drive - L : Length - Lf : Threaded length
EN 14592:2009
SUPER WOOD TF TX / ZBJ
N 6 x 50 30 12 TX 30 200 33 704
N 6 x 60 40 12 TX 30 200 33 706
N 6 x 70 40 12 TX 30 200 33 708
6 x 80 50 12 TX 30 100 33 620
6 x 100 50 12 TX 30 100 33 625
6 x 120 75 12 TX 30 100 33 630
6 x 140 75 12 TX 30 100 33 635
6 x 160 75 12 TX 30 100 33 640
6 x 180 75 12 TX 30 100 33 645
6 x 200 75 12 TX 30 100 33 650
6 x 220 75 12 TX 30 100 33 655
6 x 240 75 12 TX 30 100 33 660
6 x 260 75 12 TX 30 100 33 665
6 x 280 75 12 TX 30 100 33 670
6 x 300 75 12 TX 30 100 33 675
N New
EN 14592:2009
SUPER WOOD TF TX / ZBJ
10 x 80 52 18 TX 40 50 33 810
10 x 90 52 18 TX 40 50 33 815
10 x 100 52 18 TX 40 50 33 820
10 x 120 80 18 TX 40 50 33 825
10 x 140 80 18 TX 40 50 33 830
10 x 160 80 18 TX 40 50 33 835
10 x 180 80 18 TX 40 50 33 840
10 x 200 80 18 TX 40 50 33 845
10 x 220 80 18 TX 40 50 33 850
10 x 240 80 18 TX 40 50 33 855
10 x 260 80 18 TX 40 50 33 860
10 x 280 80 18 TX 40 50 33 865
10 x 300 80 18 TX 40 50 33 870
10 x 320 80 18 TX 40 50 33 875
10 x 340 80 18 TX 40 50 33 880
10 x 360 80 18 TX 40 50 33 885
10 x 380 80 18 TX 40 50 33 890
10 x 400 80 18 TX 40 50 33 895
Cross references :
Washers, recessed, see page 504
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Torx drive bits, see page 663
Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length - Lf : Threaded length - Head : Head outside diameter
EN 14592:2009
VBU PRO TF TX / ZBJ
4 x 15 Ft 8 TX 20 500 39 441
4 x 20 Ft 8 TX 20 500 39 443
4 x 25 Ft 8 TX 20 500 39 444
4 x 30 Ft 8 TX 20 500 39 445
4 x 35 Ft 8 TX 20 500 39 446
4 x 40 20 8 TX 20 500 39 433
4 x 40 Ft 8 TX 20 500 39 447
4 x 45 Ft 8 TX 20 500 39 450
4 x 50 20 8 TX 20 500 39 435
4 x 50 Ft 8 TX 20 500 39 451
4 x 60 Ft 8 TX 20 250 39 453
4 x 70 60 8 TX 20 250 39 454
5 x 20 Ft 10 TX 25 500 39 481
5 x 30 Ft 10 TX 25 500 39 483
5 x 35 Ft 10 TX 25 500 39 484
5 x 40 20 10 TX 25 500 39 437
5 x 40 Ft 10 TX 25 500 39 485
5 x 45 Ft 10 TX 25 250 39 486
5 x 50 30 10 TX 25 250 39 439
5 x 50 Ft 10 TX 25 250 39 487
5 x 60 Ft 10 TX 25 250 39 489
N 5 x 60 40 10 TX 25 250 39 542
5 x 70 60 10 TX 25 250 39 490
5 x 80 60 10 TX 25 200 39 491
Ft : Full length thread continued on next page
EN 14592:2009
VBU PRO TF TX / ZBJ
6 x 30 Ft 12 TX 25 500 39 502
6 x 40 Ft 12 TX 25 250 39 504
Head 6 x 50 Ft 12 TX 25 250 39 506
6 x 60 Ft 12 TX 25 150 39 508
Lf 150 39 510
6 x 70 60 12 TX 25
6 x 80 60 12 TX 25 150 39 512
6 x 90 60 12 TX 25 150 39 514
6 x 100 60 12 TX 25 100 39 516
6 x 120 75 12 TX 25 100 39 520
6 x 130 75 12 TX 25 100 39 522
6 x 140 75 12 TX 25 100 39 524
N 6 x 150 75 12 TX 25 100 39 526
6 x 160 75 12 TX 25 100 39 528
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bits: Torx 10 (code 325 085) / Torx 20 (code 325 090) / Torx 25 (code 325 100), see page 663
Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length - Lf : Threaded length - Head : Head outside diameter
VBU TF / ZBJ
5 x 40 10 PZ 2 500 25 500
5 x 50 10 PZ 2 250 25 510
5 x 60 10 PZ 2 250 25 520
6 x 40 12 PZ 3 250 25 560
6 x 50 12 PZ 3 250 25 570
6 x 60 12 PZ 3 150 25 575
6 x 70 12 PZ 3 150 25 580
6 x 80 12 PZ 3 150 25 585
6 x 90 12 PZ 3 150 25 590
Application:
- Range of screws adapted to pose with our plastic anchors, see pages 212
Other material available:
- Stainless steel, see page 30
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Pozidriv Number 1 - 2 - 3 drive bits, see page 663 - Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length - Head : Head outside diameter
NAIL
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit: Torx 30 (code 325 115), see page 663 - Power screwdrivers, see page 654
14
Carbon steel white coating Austenitic stainless steel
Lf
A2 Aisi 304
Resistance to corrosion Resistance to corrosion
= 2 Kesternich cycles = 2 Kesternich cycles
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit: Torx 30 (code 325 115), see page 663 - Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length - Lf : Threaded length - Head : Head outside diameter
EN 14592:2009
SUPER WOOD TPL TX / Zn
8 x 80 52 22 TX 40 50 34 520
8 x 100 52 22 TX 40 50 34 522
Lf 8 x 120 80 22 TX 40 50 34 524
8 x 140 80 22 TX 40 50 34 526
8 x 160 80 22 TX 40 50 34 528
8 x 180 80 22 TX 40 50 34 530
8 x 200 80 22 TX 40 50 34 532
8 x 220 80 22 TX 40 50 34 534
8 x 240 80 22 TX 40 50 34 536
8 x 260 80 22 TX 40 50 34 538
8 x 280 80 22 TX 40 50 34 540
8 x 300 80 22 TX 40 50 34 542
8 x 320 80 22 TX 40 50 34 544
8 x 340 80 22 TX 40 50 34 546
8 x 360 80 22 TX 40 50 34 548
8 x 380 80 22 TX 40 50 34 550
8 x 400 80 22 TX 40 50 34 552
10 x 80 52 25 TX 40 50 34 560
10 x 100 52 25 TX 40 50 34 562
10 x 120 80 25 TX 40 50 34 564
10 x 140 80 25 TX 40 50 34 566
10 x 160 80 25 TX 40 50 34 568
10 x 180 80 25 TX 40 50 34 570
10 x 200 80 25 TX 40 50 34 572
10 x 220 80 25 TX 40 50 34 574
10 x 240 80 25 TX 40 50 34 576
10 x 260 80 25 TX 40 50 34 578
10 x 280 80 25 TX 40 50 34 580
10 x 300 80 25 TX 40 50 34 582
10 x 320 80 25 TX 40 50 34 584
10 x 340 80 25 TX 40 50 34 586
continued on next page
EN 14592:2009
SUPER WOOD TPL TX / Zn
Cross references :
Recessed washers, see page 504
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bits: Torx 40 (code 325 120) / Torx 30 (code 325 115), see page 663
Power screwdrivers, see page 654
Pattern : Bit drive recess - L : Length - Lf : Threaded length - Head : Head outside diameter
8 x 50 13 100 15 234
8 x 60 13 100 15 260
8 x 70 13 100 15 245
8 x 80 30 13 100 15 250
8 x 90 40 13 100 15 256
8 x 100 50 13 100 15 230
CS 8 x 120 70 13 50 15 220
8 x 140 90 13 50 15 238
8 x 150 100 13 50 15 244
8 x 160 110 13 50 15 240
8 x 180 130 13 50 15 257
8 x 200 150 13 50 15 265
Cross reference :
One piece sockets TH 10 (code 323 510) / TH 13 (code 323 525), see page 660
SHERARDIZED STEEL
HEX. HEAD (13 MM A/F)
Natural nish lag screw
Sherardized steel
x L H Pack. Code
7 x 50 13 100 19 802
H
Lag screw diameter on thread
Complying with CSTB booklet No. 3316
Facade application:
- Fastening timber joists to ISOLCO 3000 P brackets, see our FACADE booklet
Cross references :
One-piece nutsetter TH 13 (code 323 525), see page 660 - ISOLCO 3000 P brackets, see page 598
CS
Lag screw natural nish Painted head lag screw Lag screw tted with
Vulca 19 mm washer
Painted head and washer
Hot dip galvanized steel Hot dip galvanized steel Hot dip galvanized steel
+ Galva / EPDM washer
LBT 2 / HdG-P LBT 2 / HdG-P + VG 19
LBT 2 / HdG
PAINTED PAINTED
x L CS max H Pack. Code Pack. Code Pack. Code
8 x 80 30 12 100 12 750 100 12 751 100 12 756
8 x 90 40 12 100 12 740 100 12 741 100 12 746
8 x 100 50 12 100 12 730 100 12 731 100 12 736
8 x 120 70 12 100 12 190 100 12 191 100 12 196
8 x 130 80 12 100 12 184 100 12 172 100 12 173
8 x 140 90 12 100 12 690 100 12 691 100 12 696
8 x 160 110 12 100 12 680 100 12 681 100 12 686
8 x 180 130 12 100 12 650 100 12 651 100 12 656
8 x 200 150 12 100 12 160 100 12 161 100 12 166
8 x 220 170 12 100 12 175 100 12 176 100 12 178
8 x 240 190 12 100 12 610 100 12 611 100 12 612
Cross references :
Drill bit, HSS double-edged cutting (code 282 950), see page 670
One-piece nutsetter TH 12 (code 323 520), see page 660
One-piece nutsetter TH 13 (code 323 525), see page 660 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - H : Hex. drive - L : Length
Cross references :
One-piece nutsetter TH 10 (code 323 510), see page 660
Drill bit, HSS double-edged cutting (code 282 950), see page 670
CARBON STEEL
STANDARD HEX. HEAD (DIN 571)
Natural nish lag screw
Carbon steel
LAG SCREW HEX / Zn
(Din 571)
x L H Pack. Code
5 x 20 8 200 18 500
5 x 25 8 200 18 510
5 x 30 8 200 18 520
5 x 35 8 200 18 530
H 5 x 40 8 200 18 540
5 x 50 8 200 18 560
6 x 25 10 200 12 100
6 x 30 10 200 12 090
6 x 35 10 200 12 080
6 x 40 10 200 12 070
6 x 45 10 200 12 060
6 x 50 10 200 12 050
6 x 60 10 100 12 040
6 x 70 10 100 18 680
6 x 80 10 100 12 020
6 x 90 10 100 12 010
6 x 100 10 100 12 000
6 x 110 10 100 12 005
6 x 120 10 100 12 030
7 x 50 12 200 12 140
7 x 60 12 100 18 875
8 x 30 13 200 12 290
8 x 35 13 200 12 280
8 x 40 13 200 12 270
8 x 45 13 200 12 260
continued on next page
CARBON STEEL
STANDARD HEX. HEAD (DIN 571)
Natural nish lag screw
Carbon steel
LAG SCREW HEX / Zn
next (Din 571)
x L H Pack. Code
8 x 50 13 200 12 250
8 x 60 13 100 12 240
8 x 70 13 100 19 080
8 x 80 13 100 12 220
H 8 x 90 13 100 19 100
8 x 110 13 50 19 120
8 x 140 13 50 19 160
8 x 160 13 50 12 180
10 x 40 17 100 19 240
10 x 50 17 100 19 260
10 x 60 17 100 12 450
10 x 70 17 100 12 440
10 x 80 17 50 12 430
10 x 90 17 50 19 300
10 x 100 17 50 12 420
10 x 110 17 50 19 320
10 x 120 17 50 12 410
10 x 130 17 50 19 340
10 x 140 17 50 12 400
10 x 150 17 50 12 370
10 x 160 17 50 12 380
10 x 180 17 50 12 360
10 x 200 17 50 12 340
12 x 80 19 50 19 490
12 x 100 19 50 19 510
12 x 120 19 50 19 530
12 x 140 19 50 19 550
12 x 160 19 25 19 570
12 x 180 19 25 19 590
12 x 200 19 25 19 610
12 x 240 19 25 19 625
12 x 250 19 25 19 630
12 x 300 19 25 19 635
Cross references :
Bit holder (code 323 100), see page 662 - Hex head nutsetters, see page 662
LBT 1 / HdG
Cross reference :
Drill bit, HSS double-edged cutting (code 282 950), see page 670
VH9 / HdG
x L H Pack. Code
6 x 40 10 100 21 990
6 x 60 10 100 22 050
6 x 70 10 100 22 070
6 x 80 10 100 22 080
H 6 x 100 10 100 22 082
Cross reference :
Drill bit, HSS double-edged cutting (code 282 950), see page 670
RING NAIL TH / SS A4
x L Pack. Code
1,9 x 25 1 000 29 840
1,9 x 30 1 000 29 799
2,3 x 35 1 000 29 843
2,3 x 45 500 29 845
2,3 x 50 500 29 849
2,5 x 60 250 29 853
3,1 x 75 250 29 857
4,0 x 100 100 29 858
CLOUPLAST / SS A4
Cladding application:
- Fastening PVC parts on a timber framework
Colours: White Ral 9010 (Ref. 1) - Green (Ref. 6) - Grey Ral 9002 (Ref. 42) - Baked clay (Ref. 53) - Tile red
Ral 8012 (Ref.54) - Linen green Ral 6021 (Ref. 55) - Black Ral 9005 (Ref. 70) - Brick (Ref. 80) - Brown red
(Ref. 98)
Roong application:
- Fastening edge tiles on a timber structure
Roong application:
- Fastening tile caps on a timber framework
L : Length
WG 2 / HdG
x L Pack. Code
4,3 x 40 100 29 610
4,3 x 50 100 29 620
4,3 x 60 100 29 630
4,3 x 70 100 29 640
4,3 x 80 100 29 650
4,3 x 90 100 29 660
Cross reference :
EPDM washer, see page 409
CARBON STEEL
SMOOTH SHANK NAIL - 16 MM PAN HEAD
Natural head PAINTED head
Carbon steel Carbon steel
L : Length
CARBON STEEL
TWISTED SHANK NAIL - 16 MM PAN HEAD
Natural head PAINTED head
Carbon steel Carbon steel
ROOFING NAIL / Zn
x L Pack. Code
4 x 40 250 29 900
4 x 50 250 29 902
CONCRETE NAIL / Zn
Application:
- Fastening to concrete
2 - 1 Self-drilling screw
Drill point 53 to 159
58 to 60 61 to 66 67 to 71 72 to 73 73 74
000
75 76 to 79 80 to 81 82 to 83 84 85
110 to
000 111
000 112 to
000 115
000 116 to
000 127
000 000 000
128 to 134 135 to 141 142 to 147 148 to 153 000 000
154 to 155
Bugle
head
156 to 159
2 - 2 Self-tapping screw
with pre-drilling of steel support 161 to 176
STAINLESS STEEL A2 SCREW 164 to 168 164 166 169 172 174 176
2 - 2 Self-tapping screw
with pre-drilling of concrete or masonry 177 to 181
SUPRACOAT 3C COATED STEEL SCREW 177 to 181 177 to 181 177 178 179 180 181
Steel support
Aluminium support
Wooden support
TECHNICAL RECOMMENDATIONS
WARNING
Screwdriver rotation speed and axial load to match the screw diameter :
Fibre-cement sheets
The risk of sheet cracking, waterproong problems
Star 25
CA
CP
Head
1.5 to 3.5 5,5 x 28 3,5PI 7 12 Star 25 - 100 372 530 100 372 534
1.5 to 3.5 5,5 x 28 3,5PI 5 12 Star 25 10 100 372 531 100 372 535
1.5 to 3.5 5,5 x 28 3,5PI 5 12 Star 25 16 100 372 565 100 372 566
1.5 to 3.5 5,5 x 38 3,5PI 12 14,5 Star 25 - 100 372 537 100 372 547
1.5 to 3.5 5,5 x 38 3,5PI 10 14,5 Star 25 10 100 372 538 100 372 539
1.5 to 3.5 5,5 x 38 3,5PI 10 14,5 Star 25 16 100 372 567 100 372 568
Pan head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon steel
PI: Pilot point. Specially designed for fastening a series of thin sheets. Drills all of the sheets before the thread starts to enter the support.
Ref. 3T : Drilling capacity 2 to 3 steel sheet thickness 0.75 mm
Colours: ETANCO colour chart, see page 364
Cladding application:
- DRILLNOX STAR TB with washer 16 used for ALUMINIUM or steel sheet
- DRILLNOX STAR TB 4.8 x 20: Edging the bottom or pre-painted sheet
- DRILLNOX STAR TB 5.5 x 28 PI: Fastening the sheet or pre-painted single skin panel onto a steel frame
- DRILLNOX STAR TB 5.5 x 38 PI: Fastening the sheet or pre-painted dual skin panel onto a holder
- DRILLNOX STAR TB 5.5 x 26 / 40: Fastening the sheet or pre-painted single skin panel onto a steel frame
Facade application:
- DRILLNOX STAR TB 5.5 x 38 PI without washer: Fastening pre-drilled cladding panels (see technical approval) onto 2.5 mm aluminium or steel frames
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Star 25 (code 325 050), see page 663 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - Pattern : Bit drive recess - L : Length
- Head : Head outside diameter
Star 25
CP
Head
Pan head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon steel
Colours: ETANCO colour chart, see page 364
Cladding application:
- Fastening the bottom sheet or single skin pre-painted sheet onto a timber rail
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Star 25 (code 325 050), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - Pattern : Bit drive recess - L : Length - Head : Head outside diameter
PH 2
CA
CP
Head
Pan head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon steel
Colours: ETANCO colour chart, see page 364
Application:
- Fasteners for aluminium or PVC frames on a steel support
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - Pattern : Bit drive recess - L : Length
- Head : Head outside diameter
8
CS CA
CP
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic stainless steel Austenitic stainless steel Austenitic stainless steel
A4 Aisi 316 L A4 Aisi 316 L A4 Aisi 316 L
Test Report Carbon steel drill point Carbon steel drill point Carbon steel drill point
+ SS Vulca / EPDM washer + SS Vulca / EPDM washer
Resistance to corrosion Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles > 30 Kesternich cycles
DRILLNOX TH DRILLNOX TH + Washer DRILLNOX TH + Washer
Natural nish Natural nish Painted
SS SS
CP x L Ref. CS min CA max. H Pack. Code Pack. Code Pack. Code
Vulca Vulca
2 to 3x0.75 6,3 x 25 3T - 6 8 100 372 399
2 to 3x0.75 6,3 x 25 3T - 4 8 16 100 372 400 16 100 372 405
2 to 3x0.75 6,3 x 25 3T - 3 8 19 100 372 402 19 100 372 406
2 to 3x0.75 4,8 x 20 #
3T - 5 8 100 372 493
2 to 3x0.75 4,8 x 20 #
3T - 3 8 14 100 372 483 14 100 372 494
next Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic stainless steel Austenitic stainless steel Austenitic stainless steel
A4 Aisi 316 L A4 Aisi 316 L A4 Aisi 316 L
Test Report Carbon steel drill point Carbon steel drill point Carbon steel drill point
+ SS Vulca / EPDM washer + SS Vulca / EPDM washer
Resistance to corrosion Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles > 30 Kesternich cycles
DRILLNOX TH DRILLNOX TH + Washer DRILLNOX TH + Washer
Natural nish Natural nish Painted
SS SS
CP x L Ref. CS min CA max. H Pack. Code Pack. Code Pack. Code
Vulca Vulca
1.5 to 3.5 5,5 x 78 3,5 39 57 8 100 372 450
1.5 to 3.5 5,5 x 78 3,5 37 55 8 16 100 372 452 16 100 372 455
2 to 6 5,5 x 56 #
6PI - 24 8 100 372 387
2 to 6 5,5 x 56 #
6PI - 22 8 16 100 372 389 16 100 372 391
(#) Austenitic stainless steel A2 Aisi 304 - Out of German Technical Approval No. Z - 14.1 - 4
Hex head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon steel
PI: Pilot point. Specially designed for fastening a series of thin sheets. Drills all of the sheets before the thread starts to enter the support.
Ref. 3T : Drilling capacity 2 to 3 steel sheet thickness 0.75 mm
Complying with ETA No. 10-0181 issued by the DIBt (DRILLNOX + Washer 16 mm)
German Technical Approval No. Z - 14.1 - 4 (DRILLNOX + Washer 16 mm)
VERITAS report on request
Colours: ETANCO colour chart, see page 364
Cladding application:
- DRILLNOX + VI 16: Fastening a STEEL or ALUMINIUM single skin sheet onto a steel rail
Roong application:
- DRILLNOX + VI 16 long length: Fastening the steel sheet through the corrugation (with saddle washer) onto a steel frame
Complying with DTU 40.35 and 40.36
- DRILLNOX + VI 19: Fastening the bottom steel sheet onto a steel frame - Complying with DTU 40.35
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS
CA 8
CP
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic stainless steel Austenitic stainless steel Austenitic stainless steel
A4 Aisi 316 L A4 Aisi 316 L A4 Aisi 316 L
Carbon steel drill point Carbon steel drill point Carbon steel drill point
+ SS Vulca / EPDM washer + SS Vulca / EPDM washer
Resistance to corrosion Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles > 30 Kesternich cycles
DRILLNOX SPIRAL DRILLNOX SPIRAL DRILLNOX SPIRAL
Natural nish + Washer / Nat. nish + Washer / Painted
SS SS
CP x L Ref. CS min CA max. H Pack. Code Pack. Code Pack. Code
Vulca Vulca
4 to 18 5,5 x 60 18 - 18 8 100 376 620
4 to 18 5,5 x 60 18 - 16 8 16 100 376 621 16 100 376 622
4 to 18 5,5 x 60 18 - 16 8 19 100 376 625 19 100 376 623
Hex head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon steel
Colours: ETANCO colour chart, see page 364
Cladding application:
- DRILLNOX SPIRAL + VI 16: Fastening a STEEL or ALUMINIUM single skin sheet onto a steel rail
Roong application:
- DRILLNOX SPIRAL + VI 19: Fastening the bottom steel sheet onto a steel frame - Complying with DTU 40.35
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS CA 8
CP
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic stainless steel Austenitic stainless steel Austenitic stainless steel
A4 Aisi 316 L A4 Aisi 316 L A4 Aisi 316 L
Carbon steel drill point Carbon steel drill point Carbon steel drill point
Resistance to corrosion + SS Vulca / EPDM washer + SS Vulca / EPDM washer
> 30 Kesternich cycles Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles
DRILLNOX HP3 TH DRILLNOX HP3 TH DRILLNOX HP3 TH
Natural nish + Washer Natural nish + Washer Painted
SS SS
CP x L Ref. CS min CA max. H Pack. Code Pack. Code Pack. Code
Vulca Vulca
1.5 to 3 6 x 32 3 4 15 8 100 374 930
1.5 to 3 6 x 32 3 2 13 8 12 100 374 929 12 100 374 932
DRILLNOX high performance with ribbed wide ange head, pitch 2 mm, asymmetric thread
DRILLNOX high performance, must be apply with interconnection screwdriver rotation speed max 2500 tr/mn and special torque control socket
Hex head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon steel
Colours: ETANCO colour chart, see page 364
Roong application:
- Fastening clip for standing seam to thin steel structure
Cross references :
HP torque control socket (code 284 005), see page 661 - Nutsetter TH 8 (code 323 500), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CP
CS
8
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic stainless steel Austenitic stainless steel Austenitic stainless steel
A4 Aisi 316 L A4 Aisi 316 L A4 Aisi 316 L
Carbon steel drill point Carbon steel drill point Carbon steel drill point
+ SS Vulca / EPDM washer + SS Vulca / EPDM washer
Resistance to corrosion Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles > 30 Kesternich cycles
Test Report
DRILLNOX WOOD DRILLNOX WOOD HEX DRILLNOX WOOD HEX
HEX - Nat. nish + Washer / Nat. nish + Washer / Painted
SS SS
CP x L CS max H Pack. Code Pack. Code Pack. Code
Vulca Vulca
0.63 to 1.25 4,9 x 35 3,25 8 100 371 490
0.63 to 1.25 4,9 x 35 1,25 8 14 100 371 492 14 100 371 494
Hex head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon steel
Complying with ETA No. 10-0181 issued by the DIBt (DRILLNOX WOOD 6.3 + Washer 16 mm)
German Technical Approval No. Z - 14.1 - 4 (DRILLNOX WOOD 6.3 + Washer 16 mm)
VERITAS report on request
Colours: ETANCO colour chart, see page 364
Cladding application:
- DRILLNOX WOOD 4.9 x 35: Fastening zinc cassettes
- DRILLNOX WOOD + VI 16: Fastening STEEL or ALUMINIUM single skin sheet onto timber frames
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - H : Hex. drive - L : Length
15 GOLDINOX
(#) Fitted with special stainless steel washer 16 / thickness 1.5 mm + EPDM
Hex head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon
steel
PI: Pilot point. Specially designed for fastening a series of thin sheets. Drills all of the sheets before the thread
starts to enter the support.
Waterproong application:
- Fastening the waterproof panel waterproof support onto steel frames
Complying with DTU 43.3 (Damp or very damp and / or aggressive atmosphere facilities)
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
ON TIMBER
Austenitic stainless steel
A4 Aisi 316 L
Carbon steel drill point
Resistance to corrosion
> 30 Kesternich cycles
15 GOLDINOX WOOD
Hex head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon
steel
Waterproong application:
- Fastening the waterproof panel waterproof support onto timber frames
Complying with DTU 43.3 (Damp or very damp and / or aggressive atmosphere facilities)
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - H : Hex. drive - L : Length
ISODRILL TH DF
Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
The combination of ISODRILL TH DF with a DF panel ensures a STEP SAFE sealing, limiting any risk of
perforating the sealing layer and stopping the fastener from becoming unscrewed.
Hex head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon
steel
Measurement of permeance to water vapor - CSTB test report No. CPM / 03-0059 bis
For more information, refer to our Waterproong Booklet.
Waterproong application:
- Fastening insulation and waterproong membrane - Complying with DTU 43.3
CS
CP
Cross references :
Plate (code 294 705), see page 469 - Nutsetter TH 8 (code 323 500), see page 660
Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS CA
Vulca
CP
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic stainless steel Austenitic stainless steel Austenitic stainless steel
A4 Aisi 316 L A4 Aisi 316 L A4 Aisi 316 L
Carbon steel drill point Carbon steel drill point Carbon steel drill point
Resistance to corrosion + SS Vulca / EPDM washer + SS Vulca / EPDM washer
> 30 Kesternich cycles Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles
DRILLNOX DF DRILLNOX DF + Washer DRILLNOX DF + Washer
Natural nish Natural nish Painted
SS SS
CP x L CS min CA max. H Pack. Code Pack. Code Pack. Code
Vulca Vulca
1.2 to 4 5,5 x 70 27 51 8 100 374 470
1.2 to 4 5,5 x 70 25 49 8 19 100 374 506 19 100 374 507
1.2 to 4 5,5 x 85 42 66 8 100 374 492
1.2 to 4 5,5 x 85 40 64 8 19 100 374 508 19 100 374 509
1.2 to 4 5,5 x 110 67 91 8 100 374 500
1.2 to 4 5,5 x 110 65 89 8 19 100 374 511 19 100 374 512
1.2 to 4 5,5 x 125 52 106 8 100 374 494
1.2 to 4 5,5 x 125 50 104 8 19 100 374 525 19 100 374 526
1.2 to 4 5,5 x 145 72 126 8 100 374 496
1.2 to 4 5,5 x 145 70 124 8 19 100 374 527 19 100 374 528
1.2 to 4 5,5 x 175 102 156 8 100 374 498
1.2 to 4 5,5 x 175 100 154 8 19 100 374 529 19 100 374 530
1.2 to 4 5,5 x 195 122 176 8 100 374 660
1.2 to 4 5,5 x 195 120 174 8 19 100 374 661 19 100 374 662
1.2 to 4 5,5 x 215 142 196 8 100 374 665
1.2 to 4 5,5 x 215 140 194 8 19 100 374 666 19 100 374 667
1.2 to 4 5,5 x 235 162 216 8 100 374 670
1.2 to 4 5,5 x 235 160 214 8 19 100 374 671 19 100 374 672
1.2 to 4 5,5 x 255 182 236 8 100 374 675
1.2 to 4 5,5 x 255 180 234 8 19 100 374 676 19 100 374 677
1.2 to 4 5,5 x 275 202 256 8 100 374 680
1.2 to 4 5,5 x 275 200 254 8 19 100 374 681 19 100 374 682
1.2 to 4 5,5 x 295 222 276 8 100 374 685
1.2 to 4 5,5 x 295 220 274 8 19 100 374 686 19 100 374 687
continued on next page
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic stainless steel Austenitic stainless steel Austenitic stainless steel
A4 Aisi 316 L A4 Aisi 316 L A4 Aisi 316 L
Carbon steel drill point Carbon steel drill point Carbon steel drill point
+ SS Vulca / EPDM washer + SS Vulca / EPDM washer
next
Resistance to corrosion Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles > 30 Kesternich cycles
DRILLNOX DF DRILLNOX DF + Washer DRILLNOX DF + Washer
Natural nish Natural nish Painted
SS SS
CP x L CS min CA max. H Pack. Code Pack. Code Pack. Code
Vulca Vulca
4 to 12.5 5,5 x 80 25 49 8 100 374 585
4 to 12.5 5,5 x 80 23 47 8 19 100 374 531 19 100 374 532
4 to 12.5 5,5 x 95 40 64 8 100 374 550
4 to 12.5 5,5 x 95 38 62 8 19 100 374 533 19 100 374 534
4 to 12.5 5,5 x 115 60 84 8 100 374 587
4 to 12.5 5,5 x 115 58 82 8 19 100 374 535 19 100 374 536
4 to 12.5 5,5 x 135 80 104 8 100 374 590
4 to 12.5 5,5 x 135 78 102 8 19 100 374 537 19 100 374 538
4 to 12.5 5,5 x 155 100 124 8 100 374 549
4 to 12.5 5,5 x 155 98 122 8 19 100 374 539 19 100 374 540
4 to 12.5 5,5 x 190 115 159 8 100 374 595
4 to 12.5 5,5 x 190 113 157 8 19 100 374 541 19 100 374 542
4 to 12.5 5,5 x 200 125 169 8 100 374 730
4 to 12.5 5,5 x 200 123 167 8 19 100 374 731 19 100 374 732
4 to 12.5 5,5 x 220 145 189 8 100 374 735
4 to 12.5 5,5 x 220 143 187 8 19 100 374 736 19 100 374 737
4 to 12.5 5,5 x 240 165 209 8 100 374 740
4 to 12.5 5,5 x 240 163 207 8 19 100 374 741 19 100 374 742
4 to 12.5 5,5 x 260 185 229 8 100 374 745
4 to 12.5 5,5 x 260 183 227 8 19 100 374 746 19 100 374 747
4 to 12.5 5,5 x 280 205 249 8 100 374 750
4 to 12.5 5,5 x 280 203 247 8 19 100 374 751 19 100 374 752
4 to 12.5 5,5 x 300 225 269 8 100 374 755
4 to 12.5 5,5 x 300 223 267 8 19 100 374 756 19 100 374 757
Hex head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon steel
German Technical Approval No. Z - 14.4 - 407 (DRILLNOX DF + Washer 19 mm)
Dual thread 7 mm 2.54 pitch: Avoids andy deformation to the outer skin of the double skin cladding or sandwich panel during tightening
Colours: ETANCO colour chart, see page 364
Roong application:
- Fastening sandwich panels through the top of the corrugation (with saddle washer) onto a steel frame
Cladding application:
- Fastening sandwich panels onto a steel frame
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CP
CS
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic stainless steel Austenitic stainless steel Austenitic stainless steel
A4 Aisi 316 L A4 Aisi 316 L A4 Aisi 316 L
Carbon steel drill point Carbon steel drill point Carbon steel drill point
+ SS Vulca / EPDM washer + SS Vulca / EPDM washer
Resistance to corrosion Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles > 30 Kesternich cycles
DRILLNOX WOOD DF DRILLNOX WOOD DF DRILLNOX BOIS DF
Natural nish + Washer Natural nish + Washer Painted
SS SS
CP x L CS min CS max H Pack. Code Pack. Code Pack. Code
Vulca Vulca
4x0,75 6,5 x 75 17 25 8 100 374 560
4x0,75 6,5 x 75 15 23 8 19 100 374 561 19 100 374 562
4x0,75 6,5 x 100 25 50 8 100 374 555
4x0,75 6,5 x 100 23 48 8 19 100 374 543 19 100 374 544
4x0,75 6,5 x 122 50 72 8 100 374 553
4x0,75 6,5 x 122 48 70 8 19 100 374 545 19 100 374 546
4x0,75 6,5 x 142 72 92 8 100 374 554
4x0,75 6,5 x 142 70 90 8 19 100 374 547 19 100 374 548
4x0,75 6,5 x 162 92 112 8 100 374 579
4x0,75 6,5 x 162 90 110 8 19 100 374 580 19 100 374 581
4x0,75 6,5 x 177 112 127 8 100 374 723
4x0,75 6,5 x 177 110 125 8 19 100 374 582 19 100 374 583
4x0,75 6,5 x 200 127 150 8 100 374 729
4x0,75 6,5 x 200 125 148 8 19 100 374 727 19 100 374 726
4x0,75 6,5 x 220 147 170 8 100 374 780
4x0,75 6,5 x 220 145 168 8 19 100 374 781 19 100 374 782
4x0,75 6,5 x 240 167 190 8 100 374 785
4x0,75 6,5 x 240 165 188 8 19 100 374 786 19 100 374 787
4x0,75 6,5 x 260 187 210 8 100 374 790
4x0,75 6,5 x 260 185 208 8 19 100 374 791 19 100 374 792
4x0,75 6,5 x 280 207 230 8 100 374 795
continued on next page
CP
CS
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic stainless steel Austenitic stainless steel Austenitic stainless steel
A4 Aisi 316 L A4 Aisi 316 L A4 Aisi 316 L
Carbon steel drill point Carbon steel drill point Carbon steel drill point
+ SS Vulca / EPDM washer + SS Vulca / EPDM washer
next
Resistance to corrosion Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles > 30 Kesternich cycles
DRILLNOX WOOD DF DRILLNOX WOOD DF DRILLNOX BOIS DF
Natural nish + Washer Natural nish + Washer Painted
SS SS
CP x L CS min CS max H Pack. Code Pack. Code Pack. Code
Vulca Vulca
4x0,75 6,5 x 280 205 228 8 19 100 374 796 19 100 374 797
4x0,75 6,5 x 300 227 250 8 100 374 800
4x0,75 6,5 x 300 225 248 8 19 100 374 801 19 100 374 802
Hex head and self-tapping body made from stainless steel, drill point and insertion thread made from carbon steel
German Technical Approval No. Z - 14.4 - 407 (DRILLNOX DF + Washer 19 mm)
Dual thread 7 mm 2.54 pitch: Avoids andy deformation to the outer skin of the double skin cladding or sandwich panel during tightening
Colours: ETANCO colour chart, see page 364
Cladding application:
- Fastening sandwich panels on timber frames
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS 8
CA
25
CP
Complying with DTU 40.37 (2011/09) and CSTB booklet No. 3297
Unfastening and buckling tests on corrugated bre-cement sheets: VERITAS Report No. DLC 790367
Colours: ETANCO colour chart, see page 364
MONOZAC / 2C - ZAMAC head, see page 102
MONOVIS / 2C - STEEL head, see page 135
Roong application:
- Fastening corrugated bre-cement 177 x 51 panels through the corrugation onto a steel frame
Cross references :
Third hand fastening tool, see page 658 - Nutsetter TH 8, self guided (code 320 085), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CP
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
Flat head w/ nibs and self-tapping body made from stainless steel, drill point and insertion thread made from
carbon steel
WINGTEKS is also available in carbon steel, see page 154
Application:
- Fastening wooden pieces onto a steel framework. Specially recommended in corrosive environments
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Star 25 (code 325 050), see page 663 - Screw driver ends, Phillips No. 3, see page 663
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - Pattern : Bit drive recess
- H : Hex. drive - L : Length - Head : Head outside diameter
ISODRILL TT
CP Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
Hex head and self-tapping body in stainless steel, drill point and zinc coated introduction thread
Measures permeance to water vapor - CSTB test report CPM / 03-0059 bis
For more information, refer to our Waterproong Booklet
Waterproong application:
- Fastening insulation and membranes on sealing metal roof decks - Complying with DTU 43.3
Cross references :
ETANCOPLAST HP4 (82x40 or 40), see page 462 - Plates, see page 466
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
CS 14
CA
STAR
CP
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic stainless steel Austenitic stainless steel Austenitic stainless steel
A2 Aisi 304 A2 Aisi 304 A2 Aisi 304
Resistance to corrosion + SS Vulca / EPDM washer + SS Vulca / EPDM washer
> 30 Kesternich cycles Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles
STARFIX / SS A2 STARFIX / SS A2 + Washer STARFIX / SS A2 + Washer
Natural nish Natural nish Painted
SS SS
CP on Alu x L CS min CA max. Pack. Code Pack. Code Pack. Code
Vulca Vulca
1.5 to 5 6,3 x 40 - 27 100 376 710
1.5 to 5 6,3 x 40 - 25 14 100 376 712 14 100 376 713
1.5 to 5 6,3 x 50 - 37 100 376 715
1.5 to 5 6,3 x 50 - 35 14 100 376 717 14 100 376 718
1.5 to 5 6,3 x 60 - 47 100 376 720
1.5 to 5 6,3 x 60 - 45 14 100 376 722 14 100 376 723
1.5 to 5 6,3 x 70 - 57 100 376 725
1.5 to 5 6,3 x 70 - 55 14 100 376 727 14 100 376 728
Easy to insert and self-holding, the STAR head is aesthetic in STAR-GRIPP 2 socket
The STAR is rmly guided during alignment and drilling: Work with only one hand!
Can be positioned in hard to access locations
Even when off-centred, STAR remains held in the STAR-GRIPP 2 and realigns once laid: It does not damage the panels and you cannot loose screws
Cannot be removed with standard sockets
Colours: ETANCO colour chart, see page 364
Solar application:
- Fastening on aluminium prole
Cross references :
One-piece, hex drive nutsetter, STAR-GRIPP 2 (code 375 012), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP on Alu : Drilling capacity into aluminium (minimum / maximum) - CSmini : Minimum Build up - L : Length
MULTIFAST TB TX / SS A2
Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB, on cellular concrete
support
For more information, refer to our Waterproong Booklet
Waterproong application (new build or renovation applications):
- Fastening insulation and waterproof menbrane on timber panels
- Fastening insulation and waterproof menbrane on cellular concrete without pre-drilling (anchoring depth:
55 mm min.)
Cross references :
Plate, 82x40 R with insulation (code 294 656), see page 469
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Torx No. 25 (code 325 100), see page 663 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - Pattern : Bit drive recess - L : Length - PAmini : Minimum anchorage depth in support - Lf : Threaded length
Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB, on cellular concrete
support
For more information, refer to our Waterproong Booklet
PA Fits into strips of 75 screws (till length 240 mm) for use with ET 240 system, ask us
Waterproong application (new build or renovation applications):
- Fastening insulation and waterproof menbrane on timber panels
- Fastening insulation and waterproof menbrane on cellular concrete without pre-drilling (anchoring depth:
55 mm min.)
Cross references :
Plate, 82x40 R with insulation (code 294 704), see page 469
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Torx No. 25 (code 325 100), see page 663 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - Pattern : Bit drive recess - L : Length - PAmini : Minimum anchorage depth in support
ON ALUMINIUM SUPPORT
TX 20
CA
CP
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Torx No. 20 (code 325 090), see page 663 - Power screwdrivers, see page 654
PERFIX TB CR / SS A2
Square
CP on Alu x L CA max. Head Pack. Code
Pattern
Square
0.75 to 2.5 3,5 x 16 10,1 6,9 n 1 200 300 485
Cross references :
Screwdriver ends, Square No. 1 = 2.3 mm (code 325 024) or No. 2 = 3 mm (code 325 025), see page 664
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP on Alu : Drilling capacity into aluminium (minimum / maximum) - Pattern : Bit drive recess - L : Length
- Head : Head outside diameter
PERFIX TB / SS A2
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Pozidriv No. 2 (code 325 010), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP on Alu : Drilling capacity into aluminium (minimum / maximum) - Pattern : Bit drive recess - L : Length
- Head : Head outside diameter
CS CA 8
CP
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
ON ALUMINIUM SUPPORT
Austenitic stainless steel
A2 Aisi 304
Resistance to corrosion
> 30 Kesternich cycles
PERFIX 3 TH / SS A2
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP# : Drilling capacity maximum - CP on Alu : Drilling capacity into aluminium (minimum / maximum)
- CSmini : Minimum Build up - H : Hex. drive - L : Length
PERFIX TH / SS A2
Cross references :
Nutsetters TH, see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP on Alu : Drilling capacity into aluminium (minimum / maximum) - H : Hex. drive - L : Length
CS
PA
25
Cross references :
Third hand fastening tool, see page 658 - Nutsetter TH 8, self guided (code 320 085), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS
Cross references :
Third hand fastening tool, see page 658 - Nutsetter TH 8, self guided (code 320 085), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
PERFIX TF / SS A2
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
MULTIFAST TF / SS A2
Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
For renovation projects, always perform on-site tests
MULTIFAST Pan Head, see page 76
For more information, refer to our Waterproong Booklet
Waterproong application:
- Fastening insulation and waterproof menbrane on timber panels
- Fastening insulation and waterproof menbrane onto cellular concrete with no pre-drilling (anchoring
depth: 55 mm min.)
Cross references :
Plate (code 294 702), see page 470
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Pozidriv No. 3 (code 325 030), see page 663 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP on Alu : Drilling capacity into aluminium (minimum / maximum) - Pattern : Bit drive recess - L : Length
- Head : Head outside diameter
8
CS CA
CP
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
aluminium alloy Aluminium alloy Aluminium alloy
Resistance to corrosion + Vulca Alu / EPDM washer + Vulca Alu / EPDM washer
> 20 Kesternich cycles Resistance to corrosion Resistance to corrosion
> 20 Kesternich cycles > 20 Kesternich cycles
PERCALU TH COLORALU TH
PERCALU TH
+ Washer + Washer
Alu Alu
CP on Alu x L CS min CA max. H Pack. Code Pack. Code Pack. Code
Vulca Vulca
2x1 5,5 x 19 - 7 8 100 331 850
2x1 5,5 x 19 - 5 8 16 100 331 851 16 100 331 855
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP on Alu : Drilling capacity into aluminium (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive
- L : Length
CA 14
CP STAR
Cross references :
One-piece, hex drive nutsetter, STAR-GRIPP 2 (code 375 012), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - L : Length
CS 14
CA
STAR
CP
Vulca
CS 14
CA
STAR
CP
Vulca
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
One-piece, hex drive nutsetter, STAR-GRIPP 2 (code 375 012), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - L : Length
- Washer : Washer outside diameter - Vulca : Washer material / EPDM
CP
CS
14
STAR
Vulca
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
One-piece, hex drive nutsetter, STAR-GRIPP 2 (code 375 012), see page 660
Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - L : Length
CS
CA
H
CP
3x0.75 or 1.5 6,3 x 22 3T/1,5 - 8 8 Alu 14 100 301 070 100 301 066
3x0.75 or 1.5 6,3 x 22 3T/1,5 - 8 12 Alu 14 100 333 400 100 333 405
3x0.75 or 1.5 6,3 x 22 3T/1,5 - 7 12 SS 19 100 333 600 100 333 605
4x0.75 or 2.5 6,3 x 25 4T/2,5 - 8 12 Alu 14 100 333 610 100 333 615
4x0.75 or 2.5 6,3 x 32 4T/2,5 - 15 12 Alu 14 100 333 702 100 333 707
4x0.75 or 2.5 6,3 x 32 4T/2,5 - 14 12 SS 19 100 333 700 100 333 705
4x0.75 or 2.5 6,3 x 45 4T/2,5 - 30 12 - - 100 333 719 100 333 722
4x0.75 or 2.5 6,3 x 45 4T/2,5 - 28 12 Alu 14 100 333 710 100 333 713
4x0.75 or 2.5 6,3 x 45 4T/2,5 - 27 12 SS 19 100 333 720 100 333 723
4x0.75 or 2.5 6,3 x 65 4T/2,5 - 50 12 - - 100 333 908 100 333 921
4x0.75 or 2.5 6,3 x 70 4T/2,5 - 55 12 - - 100 333 910 100 333 911
4x0.75 or 2.5 6,3 x 80 4T/2,5 36 65 12 - - 100 333 885 100 333 888
4x0.75 or 2.5 6,3 x 100 4T/2,5 41 85 12 - - 100 333 890 100 333 893
1.5 to 4 5,5 x 25 4PI - 7 10 Alu 14 100 333 200 100 333 205
1.5 to 4 5,5 x 25 4PI - 6 10 SS 19 100 333 203 100 333 206
1.5 to 4 5,5 x 38 4PI - 16 10 Alu 14 100 330 820 100 330 821
continued on next page
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
Nutsetter, TH 12 special for third hand (code 324 050), see page 659
Standard nutsetters, TH 8 / TH 10 / TH 12, see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
- Washer : Washer outside diameter - Vulca : Washer material / EPDM
CS
CA
CP H
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
Nutsetter, TH 12 special for third hand (code 324 050), see page 659 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CP
CS
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
Nutsetter, TH 12 specially for third hand (code 324 050), see page 659
Standard nutsetters, TH 10 / TH 12, see page 660 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
ON STEEL SUPPORT
CS
CA
12
CP
Vulca
ON STEEL SUPPORT
Cross references :
Nutsetter, TH 12 special for third hand (code 324 050), see page 659
Standard nutsetter, TH 12 (code 323 520), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
ON TIMBER
CP
CS
Vulca
ON TIMBER
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
Nutsetter, TH 12 special for third hand (code 324 050), see page 659
Standard nutsetter, TH 12 (code 323 520), see page 660 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS
12
CA
25
CP
Complying with DTU 40.37 (2011/09) and CSTB booklet No. 3297
Screw head 20 years anticorrosion guarantee
VERITAS Report No. DLC / 79304 / 1 (Screw head corrosion resistance)
Zamac casting for high tightening torque
Colours: ETANCO colour chart, see page 364
Unfastening and buckling tests on corrugated bre-cement sheets: VERITAS Report No. DLC 790367
Other dimensions on request
Roong application:
- Fastening 177 x 51 corrugated bre-cement panels through the corrugation tops onto steel frames
MONOVIS / 2C - STEEL head, see page 135
MONO-DRILLNOX - Bi-metal screw, see page 72
Cross references :
Nutsetter, TH 12 special for third hand (code 324 050), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659
Standard nutsetter, TH 12 (code 323 520), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS
12
CA
25
CP
Complying with DTU 40.37 (2011/09) and CSTB booklet No. 3297
Screw head 20 years anticorrosion guarantee
VERITAS Report No. DLC / 79304 / 1 (Screw head corrosion resistance)
Zamac casting for high tightening torque
Colours: ETANCO colour chart, see page 364
Unfastening and buckling tests on corrugated bre-cement sheets: VERITAS Report No. DLC 790367
Roong application:
- Fastening 177 x 51 corrugated bre-cement panels through the corrugation tops onto steel frames
MONOVIS SPIRAL / 2C - STEEL head, see page 136
Cross references :
Nutsetter, TH 12 special for third hand (code 324 050), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659
Standard nutsetter, TH 12 (code 323 520), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CP
Cross references :
Nutsetter, TH 12 special for third hand (code 324 050), see page 659
Standard nutsetter, TH 12 (code 323 520), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CANALZAC SPIRAL / 2C + 30 vulca washer is complying with CSTB booklet No. 3297
Screw head 20 years anticorrosion guarantee
VERITAS Report No. DLC / 79304 / 1 (Screw head corrosion resistance)
Zamac casting for high tightening torque
Roong application:
- Fastening bre-cement panels to support drain tiles on a steel framework
CANALVIS SPIRAL / 2C - STEEL head, see page 138
CS
CA
CP
Cross references :
Nutsetter, TH 12 special for third hand (code 324 050), see page 659
Standard nutsetter, TH 12 (code 323 520), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
ON STEEL SUPPORT
CS
CA
H
CP
18
FAT / 2C
Alu
CP x L Ref. CS min CA max. H Pack. Code
Vulca
2 to 4x0.75 4,8 x 25 4T SF - 4x0,75 10 - 100 334 300
2 to 4x0.75 4,8 x 25 4T SF - 4x0,75 10 14 100 334 305
ON STEEL SUPPORT
CS
CA
H
CP
18
FAT / 2C
Alu
CP x L Ref. CS min CA max. H Pack. Code
Vulca
4 to 12 6 x 105 12 42 84 12 - 100 289 247
4 to 12 6 x 120 12 57 99 12 - 100 331 677
4 to 12 6 x 145 12 82 124 12 - 100 289 249
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
Nutsetter, TH 12 special for third hand (code 324 050), see page 659
Standard nutsetters, TH 10 - 12, see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
ON TIMBER
CP
CS
12
18
FAT WOOD / 2C
Alu
CP x L CS min CS max H Pack. Code
Vulca
4x0,75 6,5 x 38 - 3 12 14 100 551 110
4x0,75 6,5 x 53 - 3 12 14 100 551 120
4x0,75 6,5 x 75 5 25 12 - 100 551 200
4x0,75 6,5 x 100 25 50 12 - 100 551 204
4x0,75 6,5 x 130 50 80 12 - 100 551 208
4x0,75 6,5 x 150 80 100 12 - 100 551 212
4x0,75 6,5 x 180 100 130 12 - 100 551 216
Cross references :
VULCO saddle washer, see page 375
VULCO collars, see page 380
Nutsetter, TH 12 special for third hand (code 324 050), see page 659
Standard nutsetter, TH 12 (code 323 520), see page 660 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
ON STEEL SUPPORT
CS 12
CA
CP
22
FAT 2000 TS / 2C
SS
CP x L CS min CA max. H Pack. Code
Vulca
2 to 6 6,3 x 25 - 7 12 19 100 330 460
2 to 6 6,3 x 38 - 23 12 19 100 330 490
Cross references :
Nutsetter, TH 12 (code 323 520), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CA 14
CP
STAR
Carbon steel
+ Vulca Alu / EPDM washer
STARCOLOR / ZnL
PAINTED
Alu
CP x L Ref. CA max. Pack. Code
Vulca
2 to 4x0.75 5,5 x 25 4T 10 13 100 375 021
Easy to insert and self-holding, the STAR head is aesthetic in STAR-GRIPP 2 socket
The STAR is rmly guided during alignment and drilling: Work with only one hand!
Can be positioned in hard to access locations
Even when off-centred, STAR remains held in the STAR-GRIPP 2 and realigns once laid: It does not damage the cladding panels and you cannot loose
screws
Cannot be removed with standard sockets
PI: Pilot point. Specially designed for fastening a series of thin sheets. Drills all of the sheets before the thread starts to enter the support.
Ref. 4T : Drilling capacity 2 to 4 steel sheet thickness 0.75 mm
Colours: ETANCO colour chart, see page 364
Cladding application:
- STARCOLOR 5.5 x 25: Sealing the seams of the pre-painted panel
- STARCOLOR 5.5 x 25 PI / 27 / 32: Fastening the single skin panel or pre-painted sheet onto a steel beam
- STARCOLOR 5.5 x 38 PI: Fastens the double skin panel or pre-painted sheet onto a plate
Cross references :
One-piece nutsetter, STAR-GRIPP 2 (code 375 012), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - L : Length
CP
CS
14
STAR
Carbon steel
+ Vulca Alu / EPDM washer
STARCOLOR WOOD / ZnL
PAINTED
Alu
CP x L CS max Pack. Code
Vulca
4x0,75 6,5 x 45 3 13 100 375 201
Easy to insert and self-holding, the STAR head is aesthetic in STAR-GRIPP 2 socket
The STAR is rmly guided during alignment and drilling: Work with only one hand!
Can be positioned in hard to access locations
Even when off-centred, STAR remains held in the STAR-GRIPP 2 and realigns once laid: It does not damage the cladding panels and you cannot loose
screws
Cannot be removed with standard sockets
Colours: ETANCO colour chart, see page 364
Supracoat 2C treated steel + other washers tted on request, please ask
Cladding application:
- STARCOLOR WOOD = Alu. vulca washer 13 mm: Fastening the bottom sheet or single skin pre-painted sheet onto a timber rail
Cross references :
One-piece nutsetter, STAR-GRIPP 2 (code 375 012), see page 660 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - L : Length
TX 20
CA
CP
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Torx No. 20 (code 325 090), see page 663 - Power screwdrivers, see page 654
PH 2
CA
CP
Vulca
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - Pattern : Bit drive recess - L : Length
- Head : Head outside diameter
COLORVIS TB / ZnL
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
PERFIX TB CR / Zn
Cross references :
Screwdriver ends, Square No. 1 = 2.3 mm (code 325 024) or No. 2 = 3 mm (code 325 025), see page 664
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - Pattern : Bit drive recess - L : Length
- Head : Head outside diameter
PERFIX TB / Zn
PERFIX TB / Zn
Head
CA
CP
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Screw driver ends, Phillips Nos. 1 - 2 - 3, see page 663 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - Pattern : Bit drive recess - L : Length
- Head : Head outside diameter
CS H
CA
CP
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Carbon steel Carbon steel Carbon steel
+ Vulca Galva / EPDM washer + Vulca Galva / EPDM washer
FASTOVIS TH / Zn COLORVIS TH / ZnL
FASTOVIS TH / Zn
+ Washer + Washer
Galva Galva
CP x L Ref. CS min CA max. H Pack. Code Pack. Code Pack. Code
Vulca Vulca
2 to 4x0.75 4,8 x 20 4T SF - 4x0.75 8 500 283 920
2 to 4x0.75 4,8 x 20 4T SF - 4x0.75 8 14 100 283 930 14 100 285 700
CS H
CA
CP
Vulca
next
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Carbon steel Carbon steel Carbon steel
+ Vulca Galva / EPDM washer + Vulca Galva / EPDM washer
FASTOVIS TH / Zn COLORVIS TH / ZnL
FASTOVIS TH / Zn
+ Washer + Washer
Galva Galva
CP x L Ref. CS min CA max. H Pack. Code Pack. Code Pack. Code
Vulca Vulca
1.5 to 4 4,8 x 19 4 - 9 8 1000 285 190
1.5 to 4 4,8 x 19 4 - 7 8 14 100 371 103
1.5 to 4 4,8 x 22 4 - 12 8 1000 285 220
1.5 to 4 4,8 x 22 4 - 10 8 14 100 371 106
1.5 to 4 4,8 x 25 4 - 15 8 1000 285 250
1.5 to 4 4,8 x 25 4 - 13 8 14 100 371 114
1.5 to 4 4,8 x 32 4 - 22 8 1000 285 320
1.5 to 4 4,8 x 32 4 - 20 8 14 100 371 121
1.5 to 4 4,8 x 38 4 - 28 8 1000 285 400
1.5 to 4 4,8 x 38 4 - 26 8 14 100 371 124
1.5 to 4 4,8 x 45 4 - 35 8 1000 285 450
CS H
CA
CP
Vulca
next
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Carbon steel Carbon steel Carbon steel
+ Vulca Galva / EPDM washer + Vulca Galva / EPDM washer
FASTOVIS TH / Zn COLORVIS TH / ZnL
FASTOVIS TH / Zn
+ Washer + Washer
Galva Galva
CP x L Ref. CS min CA max. H Pack. Code Pack. Code Pack. Code
Vulca Vulca
1.5 to 6 6,3 x 100 6 55 86 10 16 100 372 159
1.5 to 6 6,3 x 100 6 55 86 10 19 100 372 158
1.5 to 6 6,3 x 125 6 72 113 10 100 285 128
1.5 to 6 6,3 x 125 6 70 111 10 16 100 372 161
1.5 to 6 6,3 x 160 6 81 148 10 100 285 129
1.5 to 6 6,3 x 160 6 79 146 10 16 100 372 196
1.5 to 6 6,3 x 200 6 / 2C * 121 188 10 100 332 931
1.5 to 6 6,3 x 200 6 / 2C * 119 186 10 16 100 372 047
CS H
CA
CP
Vulca
next
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Carbon steel Carbon steel Carbon steel
+ Vulca Galva / EPDM washer + Vulca Galva / EPDM washer
FASTOVIS TH / Zn COLORVIS TH / ZnL
FASTOVIS TH / Zn
+ Washer + Washer
Galva Galva
CP x L Ref. CS min CA max. H Pack. Code Pack. Code Pack. Code
Vulca Vulca
4 to 12 5,5 x 76 12 16 57 8 100 284 980
4 to 12 5,5 x 76 12 14 55 8 16 100 284 982
4 to 12 5,5 x 100 12 35 81 8 100 284 985
4 to 12 5,5 x 100 12 33 79 8 16 100 284 987
Cross references :
Nutsetters, TH 8 (code 323 500) / TH 10 (code 323 510), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CP CA
H
Carbon steel yellow coating Supracoat 2C coated steel Supracoat 3C coated steel
Resistance to corrosion Resistance to corrosion Resistance to corrosion
= 2 Kesternich cycles = 15 Kesternich cycles = 30 Kesternich cycles
2 to 4x0.75 4,8 x 17 FC-R 2 4x0.75 8 500 284 110 500 284 113 500 284 115
2 to 4x0.75 4,8 x 17 FC-R 2 4x0.75 8 100 284 112
2 to 4x0.75 4,8 x 20 FC-SF 4x0.75 8 500 283 923# 500 283 926 500 283 934
(*) Sharp point (no pre-drilling) / (#) Carbon steel white coating
Waterproong application:
- Sealing the steel waterproong support and fastening side mountings - Complying with DTU 43.3
Cladding application:
- Sealing the plate lips
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - H : Hex. drive - L : Length
PERFIX TH / Zn
Cross references :
Bit holder (code 323 100), see page 662 - Screwdriver bits, hex head, see page 662
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - H : Hex. drive - L : Length
CP
CS
H
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Carbon steel Carbon steel Carbon steel
+ Vulca Galva / EPDM washer + Vulca Galva / EPDM washer
FASTOVIS WOOD FASTOVIS WOOD COLORVIS WOOD
TH / Zn TH / Zn + Washer TH / ZnL + Washer
Galva Galva
CP x L CS max H Pack. Code Pack. Code Pack. Code
Vulca Vulca
4x0.75 4,9 x 28 3 8 100 550 997 14 100 550 998 14 100 550 999
4x0.75 4,9 x 35 3 8 100 551 000 14 100 551 002 14 100 551 010
4x0.75 4,9 x 60 8 8 100 551 050 14 100 551 059 14 100 551 046
4x0.75 4,9 x 75 23 8 14 100 551 054 14 100 551 055
4x0.75 6,5 x 38 3 8 100 551 032 14 100 552 528 14 100 552 529
4x0.75 6,5 x 45 3 8 100 551 062 14 100 551 091 14 100 552 566
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - H : Hex. drive - L : Length
CP
CS
H
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Supracoat 2C coated Supracoat 2C coated steel Supracoat 2C coated steel
steel + Vulca Galva / EPDM washer + Vulca Galva / EPDM washer
Resistance to corrosion Resistance to corrosion Resistance to corrosion
= 15 Kesternich cycles = 15 Kesternich cycles = 15 Kesternich cycles
FASTOVIS WOOD FASTOVIS WOOD COLORVIS WOOD
TH / 2C TH / 2C + Washer TH / 2CL + Washer
Galva Galva
CP x L CS min CS max H Pack. Code Pack. Code Pack. Code
Vulca Vulca
4x0.75 6,5 x 53 - 3 8 16 100 551 048 16 100 551 051
Cross references :
Nutsetters, TH 8 (code 323 500) / TH 10 (code 323 510), see page 660
Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
CP
CA
15
Carbon steel yellow coating Supracoat 2C coated steel Supracoat 3C coated steel
Resistance to corrosion Resistance to corrosion Resistance to corrosion
= 2 Kesternich cycles = 15 Kesternich cycles = 30 Kesternich cycles
4x0.75 to 2.5 6,3 x 25 4T/2,5 - 12 10 500 331 217 100 331 227 100 331 218
2 to 6 6,3 x 22 6 - 10 10 500 331 200 100 331 203 100 331 204
4 to 12 5,5 x 32 12 - 11 8 500 331 210 100 331 215 100 331 213
Complying with ETA No. 10-0181 issued by the DIBt (GOLDOVIS 6 - 6,3 x 22)
German Technical Approval No. Z - 14.1 - 4 (GOLDOVIS 6 - 6.3 x 22)
VERITAS or our own lab report available on request
Waterproong application:
- Fastening the wateproof support panel onto steel frames - Complying with DTU 43.3
- GOLDOVIS 6.3 x 22 SF No thread with ribbing under head: Thin panel fastening and seam sealing
Over-Roong application:
- GOLDOVIS 6 x 55: Fastening MODULCO type spacers onto a steel frame
Cross references :
Nutsetters, TH 8 (code 323 500) / TH 10 (code 323 510), see page 660
Power screwdrivers, see page 654 - MODULCO spacers, see page 538
Suction nozzle (code 339 090), see page 542
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
H
CP CA
15
Carbon steel yellow coating Supracoat 2C coated steel Supracoat 3C coated steel
Resistance to corrosion Resistance to corrosion Resistance to corrosion
= 2 Kesternich cycles = 15 Kesternich cycles = 30 Kesternich cycles
Waterproong application:
- Fastening the wateproof support panel onto steel frames - Complying with DTU 43.3
Cross references :
Nutsetters, TH 10 (code 323 510), see page 660 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CP
15
Waterproong application:
- GOLDOFAST 6.5 x 51: Fastening the waterproof support panel onto timber frames - Complying with DTU 43.3
Over-Roong application:
- GOLDOFAST 6.5 x 70: Fastening (MODULCO type) spacers onto an existing timber frame (through the former roof)
Cross references :
Nutsetter, TH 10 (code 323 510), see page 660 - Power screwdrivers, see page 654
MODULCO spacers, see page 536 - Suction nozzle (code 339 090), see page 542
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - H : Hex. drive - L : Length
CP
15
Waterproong application:
- Fastening the wateproof support panel onto timber frames - Complying with DTU 43.3
Cross references :
Nutsetter, TH 10 (code 323 510), see page 660 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - H : Hex. drive - L : Length
CS
H
CP
EHB DF / 2C
EHB DF / 2C
Cross references :
Plates, see page 469 - Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS
H
CP
Cross references :
Plates, see page 469 - ET 240 automatic mounting machine, see page 665
Band of : Fasteners quantity on a strip - CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up
- H : Hex. drive - L : Length
CS
CA H
CP Vulca
Dual thread 7 mm with 2.54 pitch: Avoids deformation to the outer skin when tightening down the sandwich panel for cladding
Colours: ETANCO colour chart, see page 364
FASTOVIS WOOD DF for an application on a timber framework, see page 134
Cladding application:
- Fastening the sandwich panel on a timber frame
Cross references :
Nutsetters, TH 8 (code 323 500) / TH 10 (code 323 510), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
- Washer : Washer outside diameter - Vulca : Washer material / EPDM
CS H
Vulca
Hi-thread diameter of 7 mm with 2.54 pitch: Avoids deformation to the outer cladding skin when tightening down the sandwich panel
Colours: ETANCO colour chart, see page 364
Cladding application:
- Fastening the sandwich panel on a timber frame
Cross references :
Nutsetter TH 8 (code 323 500), see page 660 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS 8
CA
25
CP
Unfastening and buckling tests on corrugated bre-cement sheets: VERITAS Report No. DLC 790367
Colours: ETANCO colour chart, see page 364
Roong application:
- Fastening corrugated bre-cement 177 x 51 panels through the corrugation onto a steel frame
MONOZAC / 2C - ZAMAC head, see page 102
MONO-DRILLNOX - Bi-metal screw, see page 72
Cross references :
Third hand fastening tool, see page 658 - Nutsetter TH 8, self guided (code 320 085), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS
CA H
25
CP
Unfastening and buckling tests on corrugated bre-cement sheets: VERITAS Report No. DLC 790367
Colours: ETANCO colour chart, see page 364
Roong application:
- Fastening corrugated bre-cement 177 x 51 panels through the corrugation onto a steel frame
MONOZAC SPIRAL / 2C - ZAMAC head, see page 103
Cross references :
Third hand fastening tool, see page 658 - Nutsetter TH 8, self guided (code 320 085), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CP
Cross references :
Third hand fastening tool, see page 658 - Nutsetter TH 8, self guided (code 320 085), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
Roong application:
- Fastening bre-cement panels to support tiles onto a steel frame
CANALZAC SPIRAL / 2C - ZAMAC head, see page 105
CS
CA
CP
Cross references :
Third hand fastening tool, see page 658 - Nutsetter TH 8, self guided (code 320 085), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS
12
25
PA
Cross references :
Nutsetter, TH 12 special for third hand (code 324 050), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659 - Power screwdrivers, see page 654
CS
25
PA
Cross references :
Third hand fastening tool, see page 658 - Nutsetter TH 8, self guided (code 320 085), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
CS
PA
Cross references :
Third hand fastening tool, see page 658 - Nutsetter TH 8, self guided (code 320 085), see page 659
Power screwdriver + Third hand set (code 320 112), see page 659 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - CSmini : Minimum Build up - H : Hex. drive - L : Length
PH 2
CS
Lf
12
CP
EVF / 2C: Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
For more information, refer to our Waterproong Booklet
Waterproong application:
- Fastening insulation and waterproof membranes on sealing metal roof decks - Complying with DTU 43.3
- Fastening insulation and waterproof membranes on timber panels - Complying with DTU 43.4
Cross references :
Plates, see page 466 - Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
- Lf : Threaded length
CS CP
12
Cross references :
Plates, see page 470 - Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmini / maxi : Build up (maximum / minimum) - Pattern : Bit drive recess - L : Length
- Lf : Threaded length
PH 2
CS CP
12
Cross references :
Plates, see page 470 - Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - Pattern : Bit drive recess - L : Length - Lf : Threaded length
PH 2
CS
Lf
12
CP
Cross references :
Plates, see page 466 - Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
- Lf : Threaded length
PH 2
CS
12
CP
EVDF / 2C: Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
Combining EVDF with a DF plate ensures that the surface can be walked on, limiting any risk of perforating the waterproof membrane and stopping the
fastening from becoming unscrewed.
Resistance to UNSCREWING complying with standards NF P 30-315 (July 1998) & ETAG 006
EVDF / 3C: Supracoat 3C treatment on request
Fits into strips of 75 screws (till length 240 mm) for use with ET 240 system, ask us
For more information, refer to our Waterproong Booklet
Waterproong application:
- Fastening insulation and waterproof membranes on sealing metal roof decks - Complying with DTU 43.3
- EVDF / 2C & 3C: Fastening insulation and waterproof membranes onto wood - Complying with DTU 43.4
Cross references :
DF plates, see page 469 - Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
PH 2
CS
12
CP
EVB DF / 2C
EVB DF / 2C: Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
Combining EVB with a DF plate ensures that the surface can be walked on, limiting any risk of perforating the waterproof membrane and stopping the
fastening from becoming unscrewed.
Resistance to UNSCREWING complying with standards NF P 30-315 (July 1998) & ETAG 006
EVB DF / 3C: Supracoat 3C treatment on request
Fits into strips of 75 screws (till length 240 mm) for use with ET 240 system, ask us
For more information, refer to our Waterproong Booklet
Waterproong application:
- Fastening insulation and waterproof membranes on sealing metal roof decks - Used for edge fastening on surround covering - Complying with DTU
43.3
Cross references :
DF plates, see page 469 - Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
PZ 3
CS
CP
Cross references :
Plates, see page 469 - Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Pozidriv No. 3 (code 325 030), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
- Lf : Threaded length
PZ 3
CS
CP
FASTOVIS TF 3036 / 2C: Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
High resistance to bending on drilled and open panels
FASTOVIS TF 3036 / 3C: Supracoat 3C treatment on request
For more information, refer to our Waterproong Booklet
Waterproong application:
- Fastening insulation and a sealing layer onto a drilled or hollow waterproong support - Complying with DTU 43.3
Cross references :
ETANCOPLAST HP6 (82x40 or 40), see page 462 - Plates, see page 469
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Pozidriv No. 3 (code 325 030), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
PERFIX TF / Zn
PERFIX TF / Zn
Head
CA
CP
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Screwdriver bits, Phillips Nos. 1 - 2 - 3, see page 663 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - Pattern : Bit drive recess - L : Length
- Head : Head outside diameter
PZ 3
CS
CP
Cross references :
Plates, see page 469 - Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Pozidriv No. 3 (code 325 030), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
CS PZ 3
CP
FASTOVIS TF 3036 DF / 2C: Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
Combining FASTOVIS TF 3036 DF with a DF plate ensures that the surface can be walked on, limiting any risk of perforating the waterproof membrane and
stopping the fastening from becoming unscrewed.
High resistance to bending on drilled and open panels
Fits into strips of 75 screws (till length 240 mm) for use with ET 240 system, ask us
For more information, refer to our Waterproong Booklet
Waterproong application:
- Fastening insulation and a sealing layer onto a drilled or hollow waterproong support - Complying with DTU 43.3
Cross references :
Plates, see page 469 - Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Pozidriv No. 3 (code 325 030), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
SUPER WINGTEKS / 2C
12,4
CP x L N CS min CA max. Pattern Pack. Code
6 to 12.5 6,3 x 85 12 15 55 Star 30 100 288 846
6 to 12.5 6,3 x 109 12 40 80 Star 30 100 288 845
CS
CA
CP
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Screwdriver, Star 30 (code 325 051), see page 663 - Power screwdrivers, see page 654
WINGTEKS TX / Zn
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Screwdriver end, Torx 30 (code 325 115), see page 663 - Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - Pattern : Bit drive recess
- L : Length
WINGTEKS / Zn
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bits, Phillips Nos. 2 - 3, see page 663 - Drive bit, Pozidriv No. 3 (code 325 030), see page 663
Power screwdrivers, see page 654 - MODULCO spacers, see page 538
MODULECO spacers, see page 536
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - CSmini : Minimum Build up - Pattern : Bit drive recess
- L : Length - Head : Head outside diameter
VMS / 2C
Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
Supracoat 3C treated steel on request
For more information, refer to our Waterproong Booklet
Waterproong application:
- Fastening insulation and waterproof membranes on sealing metal roof decks - Complying with DTU
43.3
Cross references :
Plates, see page 466 - Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
- Lf : Threaded length
EGB / 2C
EGB / 2C (CP: 0.75 to 1.5): Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the
CSTB
Supracoat 3C treated steel on request
For more information, refer to our Waterproong Booklet
Waterproong application:
- Fastening insulation and waterproof membranes on sealing metal roof decks - Complying with DTU
43.3
Cross references :
ETANCOPLAST HP4 (82x40 ou 40), voir page 462 - Plates, see page 466
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
FASTOVIS WOOD TT / 2C
Cross references :
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Screwdriver end, Torx 30 (code 325 115), see page 663 - Power screwdrivers, see page 654
DRILLCO / Ph N
Cross references :
CALIBEL washers, see page 504
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - CSmaxi : Maximum Build up - CSmini : Minimum Build up - Pattern : Bit drive recess - L : Length
DRILLFOR TT / Ph N
Cross references :
CALIBEL washers, see page 504
Stainless steel bit holder with magnetic clips (code 323 105), see page 663
Drive bit, Phillips No. 2 (code 325 000), see page 663 - Power screwdrivers, see page 654
CP : Drilling capacity into steel (minimum / maximum) - Pattern : Bit drive recess - L : Length
2 - 2 Self-tapping screw
with pre-drilling of steel support 161 to 176
STAINLESS STEEL A2 SCREW 164 to 168 164 166 169 172 174 176
2 - 2 Self-tapping screw
with pre-drilling of concrete or masonry 177 to 181
SUPRACOAT 3C COATED STEEL SCREW 177 to 181 177 to 181 177 178 179 180 181
Steel support
Wooden support
Concrete support
CS
CA
10
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic Stainless Steel Austenitic Stainless Steel Austenitic Stainless Steel
A2 Aisi 304 A2 Aisi 304 A2 Aisi 304
+ SS Vulca / EPDM washer + SS Vulca / EPDM washer
Resistance to corrosion Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles > 30 Kesternich cycles
FASTO-INOX / A FASTO-INOX / A COLORFAST-INOX / A
Natural nish + Washer - Natural nish + Washer - Painted
SS SS
x L CS min CA max. Lf H Pack. Code Pack. Code Pack. Code
Vulca Vulca
6,5 x 16 - 1 16 10 100 335 988
6,5 x 16 - - 16 10 16 100 336 490 16 100 337 300
6,5 x 16 - - 16 10 19 100 336 491 19 100 337 301
6,5 x 19 - 4 19 10 100 335 980
6,5 x 19 - 2 19 10 16 100 336 495 16 100 337 305
6,5 x 19 - 1 19 10 19 100 336 496 19 100 337 306
6,5 x 25 - 10 25 10 100 336 000
6,5 x 25 - 8 25 10 16 100 336 500 16 100 337 310
6,5 x 25 - 7 25 10 19 100 336 505 19 100 337 311
6,5 x 30 - 15 30 10 100 336 010
6,5 x 30 - 13 30 10 16 100 336 510 16 100 337 315
6,5 x 30 - 12 30 10 19 100 336 515 19 100 337 316
6,5 x 40 - 25 40 10 100 336 020
6,5 x 40 - 23 40 10 16 100 336 580 16 100 337 320
6,5 x 40 - 22 40 10 19 100 336 585 19 100 337 321
6,5 x 50 - 35 50 10 100 336 030
6,5 x 50 - 33 50 10 16 100 336 550 16 100 337 330
6,5 x 60 - 45 60 10 100 336 040
6,5 x 60 - 43 60 10 16 100 336 560 16 100 337 340
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
next
Austenitic Stainless Steel Austenitic Stainless Steel Austenitic Stainless Steel
A2 Aisi 304 A2 Aisi 304 A2 Aisi 304
+ SS Vulca / EPDM washer + SS Vulca / EPDM washer
Resistance to corrosion Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles > 30 Kesternich cycles
FASTO-INOX / A FASTO-INOX / A COLORFAST-INOX / A
Natural nish + Washer - Natural nish + Washer - Painted
SS SS
x L CS min CA max. Lf H Pack. Code Pack. Code Pack. Code
Vulca Vulca
6,5 x 130 74 113 65 10 16 100 336 680 16 100 337 390
6,5 x 150 94 133 65 10 16 100 336 670 16 100 337 400
6,5 x 175 119 158 65 10 16 100 336 690 16 100 337 430
Complying with ETA No. 10-0181 issued by the DIBt (FASTO-INOX / A + Washer 16 mm)
German Technical Approval No. Z - 14.1 - 4 (FASTO-INOX / A + Washer 16 mm)
Test report from VERITAS or from our lab available on request, ask us
Colours: ETANCO colour chart, see page 364
Roong application:
- FASTO-INOX + VI 16: Fastening (with pre-drilling) of the steel, aluminium or sandwich panel through the corrugation (with saddle washer washer) on
timber frames (without pre-drilling) - Complying with DTU 40.35 and 40.36
- FASTO-INOX + VI 16: Fastening (with pre-drilling) of the steel, aluminium or sandwich panel through the corrugation (with saddle washer) on steel
frames - Complying with DTU 40.35 and 40.36
- FASTO-INOX + VI 19: Fastening (with pre-drilling) of steel panels on steel frames - Complying with DTU 40.35
- Pre-drilling steel framework thicknesses < 3 mm:
Support thick. 1 to 2 mm = Pre-drilling 4 mm / Support thick. 2.1 to 2.9 mm = Pre-drilling 5.05 mm
(Values provided for information only)
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
Drill bits, steel SPECIAL LR: see page 668 - Nutsetter TH 10 (code 323 510), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CSmini : Minimum Build up - H : Hex. drive - L : Length - Lf : Threaded length
CS 10
CA
Vulca
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic Stainless Steel Austenitic Stainless Steel Austenitic Stainless Steel
A2 Aisi 304 A2 Aisi 304 A2 Aisi 304
+ SS Vulca / EPDM washer + SS Vulca / EPDM washer
Resistance to corrosion Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles > 30 Kesternich cycles
FASTO-INOX / B FASTO-INOX / B COLORFAST-INOX / B
Natural nish + Washer - Natural nish + Washer - Painted
SS SS
x L CS min CA max. Lf H Pack. Code Pack. Code Pack. Code
Vulca Vulca
6,3 x 19 - 9 19 10 100 335 780
6,3 x 19 - 7 19 10 16 100 336 190 16 100 337 190
6,3 x 19 - 6 19 10 19 100 336 195 19 100 337 191
6,3 x 25 - 15 25 10 100 335 800
6,3 x 25 - 13 25 10 16 100 336 205 16 100 337 195
6,3 x 25 - 12 25 10 19 100 336 206 19 100 337 196
6,3 x 30 - 20 30 10 100 335 820
6,3 x 30 - 18 30 10 16 100 336 350 16 100 337 200
6,3 x 30 - 17 30 10 19 100 336 355 19 100 337 201
6,3 x 40 - 30 40 10 100 335 830
6,3 x 40 - 28 40 10 16 100 336 380 16 100 337 205
6,3 x 40 - 27 40 10 19 100 336 382 19 100 337 206
6,3 x 50 - 40 50 10 100 335 850
6,3 x 50 - 38 50 10 16 100 336 395 16 100 337 215
6,3 x 60 - 50 60 10 100 335 860
6,3 x 60 - 48 60 10 16 100 336 360 16 100 337 220
Bare screw Screw tted with washer Screw tted with washer
NATURAL nish PAINTED
Austenitic Stainless Steel Austenitic Stainless Steel Austenitic Stainless Steel
A2 Aisi 304 A2 Aisi 304 A2 Aisi 304
+ SS Vulca / EPDM washer + SS Vulca / EPDM washer
next
Resistance to corrosion Resistance to corrosion Resistance to corrosion
> 30 Kesternich cycles > 30 Kesternich cycles > 30 Kesternich cycles
FASTO-INOX / B FASTO-INOX / B COLORFAST-INOX / B
Natural nish + Washer - Natural nish + Washer - Painted
SS SS
x L CS min CA max. Lf H Pack. Code Pack. Code Pack. Code
Vulca Vulca
6,3 x 150 86 138 70 10 16 100 336 470 16 100 337 280
6,3 x 175 111 163 70 10 16 100 336 489 16 100 337 290
6,3 x 200 136 188 70 10 16 100 335 960 16 100 337 295
Test report from VERITAS or from our lab available on request, ask us
Colours: ETANCO colour chart, see page 364
Roong application:
- FASTO-INOX + VI 16: Fastening (with pre-drilling) of the steel, aluminium or sandwich panel through the corrugation (with saddle washer) on steel
frames - Complying with DTU 40.35 and 40.36
- FASTO-INOX + VI 19: Fastening (with pre-drilling) of steel panels on steel frames - Complying with DTU 40.35
- Pre-drilling of steel frameworks 3 mm:
Support thick. 3 to 6 mm = Pre-drilling 5.65 mm / Support thickness 6.1 to 10 mm = Pre-drilling 5.80 mm
Support thickness over 10 mm = Pre-drilling 5.95 mm (Values provided for information only)
Cross references :
VULCO saddle washer washers, see page 375 - VULCO collars, see page 380
Drill bits, steel SPECIAL LR: see page 668 - Nutsetter TH 10 (code 323 510), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CSmini : Minimum Build up - H : Hex. drive - L : Length - Lf : Threaded length
CS CA
10
CS
CA
Vulca
Cross references :
Drill bits, steel SPECIAL LR: see page 668 - Nutsetter TH 10 (code 323 510), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CSmini : Minimum Build up - H : Hex. drive - L : Length - Lf : Threaded length
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
Drill bits, steel SPECIAL LR: see page 668 - Nutsetter TH 12 (code 323 520), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CSmini : Minimum Build up - H : Hex. drive - L : Length - Lf : Threaded length
ON STEEL OR TIMBER SUPPORT - ALL PURPOSE SCREW FITTED WITH VULCA WASHER
COUNTERSINK SHARP POINT - PITCH 2.54
Cross references :
Drill bits, steel SPECIAL LR: see page 668 - Nutsetter TH 12 (code 323 520), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CSmini : Minimum Build up - H : Hex. drive - L : Length - Lf : Threaded length
CS 12
CA
Vulca
Cross references :
Drill bits, HSS steel, see page 669 - Nutsetter TH 12 (code 323 520), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CSmini : Minimum Build up - H : Hex. drive - L : Length - Lf : Threaded length
AT 233 G / 2C
Alu
x L CS min CA max. Lf H Pack. Code
Vulca
6,5 x 35 - 16 35 12 14 100 289 350
6,5 x 50 - 31 50 12 14 100 289 500
6,5 x 60 - 44 60 12 - 100 289 600
6,5 x 70 13 54 65 12 - 100 289 700
6,5 x 80 23 64 65 12 - 100 289 800
6,5 x 100 43 84 65 12 - 100 289 802
Cross references :
VULCO saddle washer, see page 375 - VULCO collars, see page 380
Drill bits, steel SPECIAL LR: see page 668 - Nutsetter TH 12 (code 323 520), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CSmini : Minimum Build up - H : Hex. drive - L : Length - Lf : Threaded length
CS 10
CA
Vulca
Cross references :
Drill bits, HSS, see page 669 - Nutsetter TH 10 (code 323 510), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CSmini : Minimum Build up - H : Hex. drive - L : Length - Lf : Threaded length
CP
CS
CA 10
Vulca
CP
CS
CA 10
Vulca
Application:
- Fastening on a timber frame (no pre-drilling) - CP: Drilling capacity: Two sheets of 0.75 mm steel
- Steel framework pre-drilling:
Support thickness 1 to 2 mm = Pre-drilling 4 mm / Support thickness 2.1 to 3.9 mm = Pre-drilling 5.05 mm
Support thickness 4 to 8 mm = Pre-drilling 5.65 mm / Support thickness 8.1 to 15 mm = Pre-drilling 5.80 mm
Support thickness over 15 mm = Pre-drilling 5.95 mm (Values provided for information only)
Cross references :
Drill bits, steel SPECIAL LR: see page 668 - Nutsetter TH 10 (code 323 510), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CSmini : Minimum Build up - H : Hex. drive - L : Length - Lf : Threaded length
CS CA 10
Vulca
Upper thread 7 mm with a 2.54 pitch: Avoids any deformation to the outer skin when tightening down the cladding sandwich panel
Colours: ETANCO colour chart, see page 364
Cladding application:
- Fastening sandwich panels on steel rails with pre-drilling:
Support thickness 1.5 to 3 mm = Pre-drilling 5.05 mm / Support thickness 3.1 to 6 mm = Pre-drilling 5.65 mm
Support thickness 6.1 to 10 mm = Pre-drilling 5.80 mm / Support thickness over 10 mm = Pre-drilling 5.95 mm
(Values provided for information only)
Cross references :
Drill bits, steel SPECIAL LR: see page 668 - Nutsetter TH 10 (code 323 510), see page 660
Power screwdrivers, see page 654
CAmaxi : Maximum assembly capacity - CSmini : Minimum Build up - H : Hex. drive - L : Length
(*) Pre-drilling diameter: 5.5 or 5 mm depending on the quality of the concrete support (perform test on-site)
Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
VERITAS test report dated 21/09/1993 No. DME 7 93 449 - Tear out test on concrete RC 25 & 45
Perform tests on site in case of ill-dened support and / or drilling with drill 5.5 and / or anchor <35 mm
PA: Anchoring depth in support: 20 mm min. / 35 mm max.
H1: Pre-drilling depth = PA + 30 mm
CS = L - PA + 5 mm
For lengths in excess of 70 mm, take BETOFAST DF: Dual-thread screws under head, see page 178
BETOFAST tted with Vulca washer on request, ask us
BATIFAST: Self-drilling screw for concrete - Flat head, see page 181
Application:
- Solid materials: Concrete, brick, blocks and prefabricated panels (with pre-drilled holes)
- Excluding heavy loads
Cross references :
Drill bits, concrete, SDS Plus, see page 680 - Plates, see page 469
Nutsetter TH 8 (code 325 000), see page 660 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - CSmini : Minimum Build up - d0 : Support drilling diameter - H : Hex. drive - L : Length
(*) Pre-drilling diameter: 5.5 or 5 mm depending on the quality of the concrete support (perform test on-site)
d0
Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
VERITAS test report dated 21/09/1993 No. DME 7 93 449
BETOFAST: Threadless screw under head, see page 177
PA: Anchoring depth into the support: 20 mm min. / 35 mm max.
H1: Pre-drilling depth = PA + 30 mm
CS = L - PA + 5 mm
For more information, refer to our Waterproong Booklet.
Waterproong application:
- Fastening insulation and waterproof membranes onto solid materials: concrete, brick, blocks and
prefabricated panels (with pre-drilled hole)
Cross references :
Plates, see page 469 - Drill bits, concrete, SDS Plus, see page 680
Nutsetter TH 8 (code 325 000), see page 660 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - CSmini : Minimum Build up - d0 : Support drilling diameter - H : Hex. drive - L : Length
CS
TX 30
10,5
PA h1
d0
BETOFAST TB TX / 3C
(*) Pre-drilling diameter: 5.5 or 5 mm depending on concrete support quality (perform test on-site)
Complying with ETAG 006.EOTA
Perform tests on site in case of ill-dened support and / or drilling with drill 5.5 and / or anchor <35 mm
PA: Anchoring depth into the support: 20 mm min. / 35 mm max.
H1: Pre-drilling depth = PA + 30 mm
CS = L - PA + 5 mm
Waterproong application:
- With ETANCOPLAST HP6 82x40 or 40: Thermal break system for fastening waterproong (Bitumen or synthetic membrane) onto concrete support.
Cross references :
ETANCOPLAST HP6 (82x40 or 40), see page 462
ETANCOPLAST HP6 40 + BTOFAST TB TX / 3C, see page 485
ETANCOPLAST HP6 82x40 + BTOFAST TB TX / 3C, see page 486
Drill bits, concrete, SDS Plus, see page 680 - Screwdriver end, Torx 30, see page 664
Power screwdrivers, see page 654
CSmaxi : Maximum Build up - CSmini : Minimum Build up - d0 : Support drilling diameter - Pattern : Bit drive recess - L : Length
CS
PH 2
PA h1
d0
BETOFAST TT / 2C
Cross references :
Drill bit, concrete 4.3 (code 284 685), see page 680
Drive bit, Phillips No. 2 patter (code 324 991), see page 664 - Power screwdrivers, see page 654
CSmaxi : Maximum Build up - d0 : Support drilling diameter - Pattern : Bit drive recess - h1 : Support drilling depth - L : Length
- PAmini : Minimum anchorage depth in support
CS
TX 30
PA h1
d0
BATIFAST TP / 3C
Cross references :
Plates, see page 469 - Drill bit, concrete 6 mm, see page 680
Drive bit, Torx No. 30 (code 325 115), see page 663 - Power screwdrivers, see page 654
d0 : Support drilling diameter - Pattern : Bit drive recess - h1# : Support drilling depth - L : Length - PAmini# : Minimum anchorage depth in support
CHAPTER 3
: Rivet diameter
Mandrel
d0 : Recommanded support drilling diameter
Flange head
(Value given for information)
L: Length of rivet
L
Lf : Length of threaded part
Rivet
S S
dw Lf
S S
d0
d0 dw
Cross references :
HSS drill bits, see page 669 - Riveters or extenders, see page 672
4,8 x 13 9,5 2x0,75 / 7,9 4,9 500 270 500 500 270 501
S 4,8 x 18 9,5 9,5 / 12,7 4,9 500 270 505 500 270 509
Cross references :
HSS drill bits, see page 669 - Riveters or extenders, see page 672
Cross references :
HSS drill bits, 5x86 mm dia. (code 282 020), see page 669 - Riveters or extenders, see page 672
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
ALL ALUMINIUM
ALUMINIUM RIVET - ALUMINIUM MANDREL
Natural ange head PAINTED ange head
Aluminium alloy Aluminium alloy
RIVET SL. RIV-COLOR SL.
ALL ALU ALL ALU
x L dw S min. / S max. d0 * Pack. Code Pack. Code
4 x 11,2 7,9 4,8 / 6,4 4,1 500 274 220 500 274 221
dw
4,8 x 9,5 9,5 3,2 / 4,8 4,9 500 274 230 500 274 231
4,8 x 11,5 9,5 2x0,75 / 6,4 4,9 500 274 240 500 274 241
S
4,8 x 14,7 9,5 6,4 / 9,5 4,9 500 274 250 500 274 251
4,8 x 17,9 9,5 9,5 / 12,7 4,9 500 274 260 500 274 261
Cross references :
HSS drill bits, see page 669 - Riveters or extenders, see page 672
dw
3,2 x 6 6 - / 1,6 3,3 500 274 000 500 274 001
3,2 x 7,5 6 1,6 / 3,2 3,3 500 274 010 500 274 011
4,8 x 8,3 9,5 - / 3,2 4,9 500 274 070 500 274 071
4,8 x 10 9,5 3,2 / 4,8 4,9 500 274 080 500 274 081
4,8 x 11,5 9,5 2x0,75 / 6,4 4,9 500 274 090 500 274 091
4,8 x 13 9,5 6,4 / 7,9 4,9 500 274 100 500 274 101
4,8 x 14,5 9,5 7,9 / 9,5 4,9 500 274 110 500 274 111
4,8 x 18 9,5 9,5 / 12,7 4,9 500 274 120 500 274 121
4,8 x 22 9,5 12,7 / 15,9 4,9 500 274 130 500 274 131
Cross references :
HSS drill bits, see page 669 - Riveters or extenders, see page 672
Cross references :
HSS drill bits, 5x86 mm dia. (code 282 020), see page 669 - Riveters or extenders, see page 672
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
Cross references :
HSS drill bits, see page 669 - Riveters or extenders, see page 672
Cross references :
HSS drill bits, 5x86 mm dia. (code 282 020), see page 669 - Riveters or extenders, see page 672
Cross references :
HSS drill bits, 5x86 mm dia. (code 282 020), see page 669 - Riveters or extenders, see page 672
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
ALL ALUMINIUM
ALUMINIUM BULB-TITE RIVETS WITH NEOPRENE WASHER
Aluminium alloy + Neoprene washer
Test Report
BULB-TITE / ALU
+ NEO
x L dw S min. / S max. d0 * Pack. Code
5,2 x 17,5 11,6 0,5 / 4,8 5,4 100 279 110
5,2 x 19,1 11,6 1,5 / 6,4 5,4 100 279 120
dw
5,2 x 22,2 11,6 4,8 / 9,5 5,4 100 279 130
5,2 x 25,4 11,6 7,9 / 12,7 5,4 100 279 140
S 5,2 x 28,6 11,6 11,1 / 15,9 5,4 100 279 150
5,2 x 31,8 11,6 14,3 / 19,1 5,4 100 279 160
Cross references :
HSS drill bit, 5.4x93 mm dia. (code 282 060), see page 669
Colour plastic cap (code 414 000), see page 190 - ACCUBIRD or POWERBIRD riveters, see page 675
COLOURED CAP
Coloured plastic
BULB-TITE CAP
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
ALL ALUMINIUM
ALUMINIUM RIVET - ALUMINIUM MANDREL - STANDARD FLANGE HEAD
NATURAL ange head PAINTED ange head
Aluminium alloy Aluminium alloy
RIVET O.T. RIV-COLOR O.T.
ALL ALU ALL ALU
x L dw S min. / S max. d0 * Pack. Code Pack. Code
3,2 x 12 6,5 7 / 9 3,3 500 273 740 500 273 741
dw
4 x 8 8 2,5 / 4,5 4,1 500 273 775 500 273 776
4 x 10 8 4,5 / 6,5 4,1 500 273 780 500 273 781
S
4 x 16 8 10,5 / 12,5 4,1 500 273 800 500 273 801
Cross references :
HSS drill bits, see page 669 - Riveters or extenders, see page 672
Cross references :
HSS drill bits, 5x86 mm dia. (code 282 020), see page 669 - Riveters or extenders, see page 672
Cross references :
HSS drill bits, see page 669 - Riveters or extenders, see page 672
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
dw
Cross references :
HSS drill bits, see page 669 - Riveters or extenders, see page 672
Aluminium alloy /
Electro-Zinc plated steel
TRP
ALU - STEEL
x L dw S max. d0 * Pack. Code
6,4 x 35 13 25 7 100 277 510
6,4 x 50 13 40 7 100 277 515
6,4 x 80 13 70 7 100 277 520
6,4 x 100 13 90 7 100 277 525
dw
6,4 x 120 13 110 7 100 277 530
6,4 x 150 13 140 7 100 277 535
S 6,4 x 175 13 165 7 100 277 540
Cross references :
HSS drill bit, 7x109 mm dia. (code 282 125), see page 669 - Plates, see page 469
Riveters or extenders, see page 672
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length
- Smaxi : Maximum nominal grip thickness
Cross references :
HSS drill bits, see page 669 - Riveters or extenders, see page 672
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
Cross references :
HSS drill bits, 5x86 mm dia. (code 282 020), see page 669 - Riveters or extenders, see page 672
Cross references :
HSS drill bits, 5x86 mm dia. (code 282 020), see page 669 - Riveters or extenders, see page 672
Cross references :
HSS drill bits, 5x86 mm dia. (code 282 020), see page 669 - Riveters or extenders, see page 672
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
ALL STEEL
STEEL RIVET - STEEL MANDREL
Zinc plated steel
RIVET O.T.
ALL STEEL
x L dw S min. / S max. d0 * Pack. Code
4,8 x 12 9 2x0,75 / 8 5,0 500 276 402
4,8 x 14 9 8 / 10 5,0 500 276 410
dw 4,8 x 16 9 10 / 12 5,0 500 276 411
4,8 x 18 9 12 / 14 5,0 500 276 412
4,8 x 20 9 14 / 16 5,0 500 276 413
S
4,8 x 25 9 16 / 21 5,0 500 276 426
4,8 x 30 9 21 / 26 5,0 500 276 427
Cross references :
HSS drill bits, 5x86 mm dia. (code 282 020), see page 669 - Riveters or extenders, see page 672
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
S
Complying with NF DTU 40.37
Tightening torque : 0.3 to 0.7 N.m
A4 stainless steel on request
PLASTINOX comprises three elements :
- A metal screew made from M 5 stainless steel
- A at stainless steel washer
- A EPDM retraction and mounting sleeve with built-in washer
Roong application :
- Blind stitching and accessory mounting on translucid panels
Cross reference :
HSS stepped drill (code 282 950), see page 670
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - H : Hex. drive - L : Length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
Cross references :
Tightening washer, see page 503 - Metal screws, see page 307 - HSS drill bits, see page 669
Fitting tool, see page 677
Cross references :
Tightening washer, see page 503 - Metal screws, see page 307 - HSS drill bits, see page 669
Fitting tool, see page 677
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
Cross references :
Rondelle de serrage, voir page 503 - Metal screws, see page 307 - HSS drill bits, see page 669
Fitting tool, see page 677
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
STEEL
THREADED INSERT FOR GRIPPING
Zinc plated steel
THREADED INSERT
/ Zn
Cross references :
Tightening washer, see page 503 - HSS drill bits, see page 669 - Fitting tool, see page 676
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - dw : Flange head diameter - L : Length - Lf : Threaded length
- Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
STAINLESS STEEL
BOXBOLT - HEX HEAD
Austenitic stainless steel
A4 Aisi 316
H
BOXBOLT / SS A4
S 10 x 50 24 3 / 23 18 15 45 Nm 20 359 670
12 x 55 26 3 / 25 20 18 80 Nm 20 359 675
d0
Zinc plated steel, see page 200
Galvanized steel, see page 200
Torque wrench tightening
Facade application :
- Fixing load bearing parts on purlin when a nut and bolt are not applicable
Cross references :
HSS drill bits, see page 669 - Fitting tool, see page 677
STEEL
BOXBOLT - HEX HEAD
d0
Cross references :
HSS drill bits, see page 669 - Fitting tool, see page 677
TT : Tightening Torque (N.m) - d0* : Drilling diameter to be adjusted according to expansion, value given for information. - MED : Min. edge distance
- H : Hex. drive - L : Length - Smaxi : Maximum nominal grip thickness - Smini : Minimum nominal grip thickness
- MED : Min. edge distance - TT : Tightening torque (N.m)
CHAPTER 4
Plasterboard
Concrete
Approval
material
material
Hollow
Page
Solid
4 - 1 Anchor for LIGHT LOAD
Self-tapping
plastic anchor
NYL SPEED 217
Self-tapping
metal anchor ZAC SPEED 217
Frame screw
Flat head BATIFAST TP 218
door for frame
Frame screw
Cylindrical head BATIFAST TC 219
Impact anchor/nail
with countersink flange TAPCO TC 222
Concrete
Approval
concrete
material
material
Cellular
Hollow
Page
Solid
4 - 1 Anchor for LIGHT LOAD
Impact anchor/nail
with countersink flange TAPCO TF 223
impact expansion
Impact anchor/nail
with extra wide flange TAP-LARGE 224
Impact anchor/nail
to thread TAPCOL F7 225
Impact anchor/nail
specially for TAPCO GE 225
fragile materials
Plastic anchor
for solid materials MARCOVIS 226
(with screw) FM-TXT
Impact anchor/nail
Alu/SS DRIVCO 236
Irremovable
irremovable
Impact anchor/nail
Zamac/Zinc plated TAPDUR 236
Irremovable
concrete. Irremovable
concrete
Concrete
Approval
material
material
material
Hollow
Other
Page
Solid
4 - 2 Anchor for MEDIUM LOAD
High expansion
lead anchor COBOL 242
medium
245
Anchor with 3 expansion to
segments by screwing-in MP3
248
Test Report
Impact expansion anchor FRAPCO 253
CRACK
Concrete
Approval
material
material
material
Hollow
Other
Page
Solid
4 - 4 CHEMICAL ANCHORING
Concrete
Approval
material
material
material
Hollow
Other
Page
Solid
4 - 5 Anchor for INSULATION
Impact anchor
for rigid insulation
EXCO 273
279
Concrete
Approval
material
material
material
Hollow
Other
Page
Solid
4 - 6 ANCHORING for SCAFFOLDING
Plastic anchor
with bolt RAVALCO/P 280
for scaffolding
Metal anchor
with bolt RAVALCO/M 281
240
ANNEAUX
Rings for
scaffolding mounts DIN 282
240
580/582
All you need to do is call and ETANCO will answer all of your questions on anchor fastening
issues.
How to implement chemical fastening?
What product is used for attaching a guardrail?
Why use chemical anchoring instead of a metal anchor?
How do I fasten to a facade?
How many scaffolding anchors should be used for a worksite?
ANCHOR Departement
Tel. :+33 1 34 80 51 61
Fax : +33 1 34 80 52 84
MULTI-MATERIAUX
E-mail : cheville@etanco.fr
l: Anchor length
Sw : Hex. head
d
h1
All dimensions are in millimeters (mm)
Solid
Concrete brick
I
d d0
Cracked Natural
concrete stone
tfix h1
d0
Solid concrete
Wood
block I
Hollow Plaster
brick block dw Sw
After prior
Plasterboard testing
BASIC ANCHOR
ALL PURPOSE FOUR SEGMENT ANCHOR WITH FLANGE HEAD
Load: Up to 75 Kg
White polypropylene
ELICO
x l d d0 h1 Box Code
6 x 33 3-5 6 45 100 218 230
I 6 x 46 3-5 6 60 100 218 232
8 x 51 4-6 8 65 100 218 234
10 x 66 5-8 10 70 100 218 236
d d0
12 x 72 6 - 10 12 90 50 218 238
h1
Design use: Solid and hollow materials - (*) With prior testing
Product denition:
- All purpose multi material anchor
- Shape locking in hollow materials
- Four anti-rotation wings
- Accepts various screw diameters
Cross references :
Drill bits, concrete, see page 680 - Wood screws, see page 39 - Screw lugs, see page 310
ALL PURPOSE FOUR SEGMENT ANCHOR WITH FLANGE HEAD - WITH SCREW, NOT FITTED
Load: Up to 75 Kg
White polypropylene
+ Carbon steel
ELICO + VBU
Design use: Solid and hollow materials - (*) With prior testing
Product denition:
- All purpose multi material anchor
- Supplied with screw, not tted: All purpose countersink head wood screw - Full length thread
- Shape locking in hollow materials
- Four anti-rotation wings
Cross reference :
Drill bits, concrete, see page 680
BASIC ANCHOR
ALL PURPOSE TWO SEGMENT ANCHOR WITH FLANGE HEAD
Load: Up to 112 Kg
Polyamide PA6 grey
NYLON XP
x l d d0 h1 Box Code
6 x 45 3-5 6 60 200 218 873
I = hnom 8 x 52 4-6 8 65 100 218 874
10 x 65 5-8 10 80 50 218 875
d d0
Design use: Solid and hollow materials - (*) With prior testing
Product denition:
h1 - All purpose multi material anchor
- High quality Nylon, resistant to outside aggression
- Four anti-rotation wings
- Perfect screw guidance in the anchor.
Cross references :
Drill bits, concrete, see page 680 - Wood screws, see page 39 - Screw lugs, see page 310
ALL PURPOSE TWO SEGMENT ANCHOR WITH FLANGE HEAD - WITH SCREW, NOT FITTED
Load: Up to 112 Kg
Polyamide PA6 grey
+ Carbon steel
NYLON XP + VBU
h1 Design use: Solid and hollow materials - (*) With prior testing
Product denition:
- All purpose multi material anchor
- Supplied with screw, not tted: All purpose countersink head wood screw - Full length thread
- High quality Nylon, resistant to outside aggression
- Four anti-rotation wings
- Perfect screw guidance in the anchor
Cross reference :
Drill bits, concrete, see page 680
BASIC ANCHOR
ALL PURPOSE ANCHOR WITHOUT FLANGE
Load: Up to 400 Kg
Polyamide PA6 grey
NYLON SC
x l d d0 h1 Box Code
5 x 25 2,5 - 4 5 35 100 218 203
I 6 x 30 3,5 - 5 6 40 100 218 206
7 x 35 4 - 5,5 7 45 200 218 208
8 x 40 4,5 - 6 8 55 100 218 210
d d0
10 x 50 6-8 10 65 50 218 212
12 x 60 8 - 10 12 75 25 218 214
h1
14 x 80 10 - 12 14 100 20 218 216
Design use: Solid and hollow materials - (*) With prior testing
Product denition:
- All purpose anchor without ange
- High quality Nylon resistant to outside agression
- Two side anti-rotation wings
- Perfect screw guidance in the
- Set through the part to be xed
Cross references :
Drill bits, concrete, see page 680 - Wood screws, see page 39 - Screw lugs, see page 310
Load: Up to 500 Kg
Polyamide PA6 grey
NYLON
x l d d0 h1 Box Code
5 x 25 2,5 - 4 5 35 100 218 040
I 6 x 30 3,5 - 5 6 40 100 218 060
7 x 35 4 - 5,5 7 45 200 218 070
8 x 40 4,5 - 6 8 55 100 218 080
d d0
10 x 50 6-8 10 65 50 218 090
12 x 60 8 12 75 25 218 120
h1
14 x 80 10 - 12 14 100 20 218 150
16 x 80 12 - 14 16 100 15 218 130
Design use: Solid and hollow materials - (*) With prior testing
Product denition:
- Universal anchor with ange
- High quality Nylon resistant to outside agressions
- 2 anti-rotation side anges
- Perfect screw guidance in the
Cross references :
Drill bits, concrete, see page 680 - Wood screws, see page 39 - Screw lugs, see page 310
BASIC ANCHOR
ALL PURPOSE ANCHOR WITH FLANGE - IN CLUSTER
Load: Up to 100 Kg
Coloured polyethylene
SIMPLEX
d0
Design use: Solid and hollow materials - (*) With prior testing
Product denition:
h1
- Universal multi material anchor with ange
- Expands greatly in friable and hollow materials
- Accepts a number of screw diameters
Cross references :
Drill bits, concrete, see page 680 - Wood screws, see page 39 - Screw lugs, see page 310
Load: Up to 30 Kg
Carbon steel 5 m
OCTOPUS
M 6 x 40 50 23 6 / 10 11 50 218 412
M 6 x 52 58 25 9 / 13 11 50 218 414
M 6 x 65 71 29 15 / 26 11 50 218 416
d
d0
Design use: Hollow materials
Product denition:
(*) before
expand - Metal ange head anchor
tfix h - Shape locking on a wide surface area with four struts
- Adapts to various material thicknesses
- Quick and easy mounting with BOLID clamp - Can expand directly by screwing in
- Supplied with pre-tted screw
- Ask for OCTOPUS version without screws.
Cross references :
Drill bits, concrete, see page 680 - Drill bit, steel, see page 669
BOLID clamp (code 218 425), see page 216
Steel
BOLID CLAMP
Pack. Code
1 218 425
Cross reference :
OCTOPUS anchors, see page 216
d : Nominal diameter - d0 : Support drilling diameter - hmini / maxi : Material minimum / maximum thickness - L : Length - tx : Maximum fastenable thickness
Load: Up to 20 Kg
Zamac
ZAC SPEED
x l d dw Box Code
4,5 x 38 3,5 - 4,5 14 100 218 250
Cross references :
Wood screws, see page 39 - Screw lugs, see page 310
Load: Up to 10 Kg
Polyamide PA6
NYL SPEED
x l d dw Box Code
4,5 x 33 3,5 - 4,5 15 100 218 861
Cross references :
Wood screws, see page 39 - Screw lugs, see page 310
d0 d
tfix
I
Load: Up to 400 Kg
Carbon steel 5 m Supracoat 3C coated steel
Resistance to corrosion Resistance to corrosion
= 2 Kesternich cycles = 30 Kesternich cycles
BATIFAST TP BATIFAST TP
Zn 3C
d x l tx # d0 h1 # Pack. Code Pack. Code
7,5 x 60 30 / 20 / - 6 40 / 50 / - 100 280 400 100 280 411
7,5 x 80 50 / 40 / 20 6 40 / 50 / 70 100 280 402 100 280 412
7,5 x 100 70 / 60 / 40 6 40 / 50 / 70 100 280 404 100 280 413
7,5 x 120 90 / 80 / 60 6 40 / 50 / 70 100 280 406 100 280 414
7,5 x 150 120 / 110 / 90 6 40 / 50 / 70 100 280 408 100 280 415
7,5 x 180 150 / 140 / 120 6 40 / 50 / 70 100 280 410 100 280 416
Cross references :
Drill bits, concrete 6 mm, see page 680 - Drill bits, steel, see page 669
Drive bit, Torx No. 30 (code 325 115), see page 663 - Plates, see page 467
Coloured plastic caps, see page 219
d : Nominal diameter - d0 : Support drilling diameter - h1# : Support drilling depth - L : Length - tx# : Maximum fastenable thickness
Load: Up to 400 Kg
Carbon steel 5 m
Resistance to corrosion
= 2 Kesternich cycles
BATIFAST TC / Zn
d x l tx # d0 h1 # Pack. Code
7,5 x 60 30 / 20 / - 6 40 / 50 / - 100 280 420
7,5 x 80 50 / 40 / 20 6 40 / 50 / 70 100 280 422
7,5 x 100 70 / 60 / 40 6 40 / 50 / 70 100 280 424
7,5 x 120 90 / 80 / 60 6 40 / 50 / 70 100 280 426
7,5 x 150 120 / 110 / 90 6 40 / 50 / 70 100 280 428
max 30 mm h1 7,5 x 180 150 / 140 / 120 6 40 / 50 / 70 100 280 430
Cross references :
Drill bits, concrete 6 mm (code 284 692), see page 680
Drive bit, Torx No. 30 (code 325 115), see page 663 - Coloured plastic caps, see page 219
Cross references :
BATIFAST TP, see page 218 - BATIFAST TC, see page 219
d : Nominal diameter - d0 : Support drilling diameter - h1# : Support drilling depth - L : Length - tx# : Maximum fastenable thickness
Load: Up to 60 Kg
Grey polyamide
+ Reinforced polyamide cone
+ Carbon steel class 5.8 zinc plated
5 m
SAUMUR / P FRAME
x l tx d d0 h1 Pack. Code
10 x 75 15 6 10 70 100 359 061
10 x 100 40 6 10 70 100 359 063
10 x 120 60 6 10 70 100 359 065
10 x 140 80 6 10 70 100 359 066
10 x 165 105 6 10 70 100 359 068
Design use: Solid and hollow materials - (*) With prior testing - Applications other than heavy loads
Product denition:
- Special frame anchor
- Fitting with spacing
- Fastening wooden, PVC and alumnimum door and window frames.
- Wide range of lenghts
- Supplied with pre-tted Pozidriv No. 3 head screws
d d0
tfix h1
Cross references :
Drill bits, 10 mm concrete, see page 680 - Drill bits, steel, see page 669
Coloured plastic caps, see page 220
Cross reference :
Anchors, SAUMUR / P FRAME, see page 220
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Load: Up to 50 Kg
Body of steel zinc plated
+ Carbon steel class 5.8 zinc plated
5 m
SAUMUR FRAME / M
x l tx d d0 h1 Pack. Code
10 x 72 12 M6 10 75 50 359 026
10 x 92 32 M6 10 75 50 359 028
10 x 112 52 M6 10 75 50 359 030
10 x 132 72 M6 10 75 50 359 032
10 x 152 92 M6 10 75 50 359 034
10 x 182 122 M6 10 75 50 359 036
Design use: Solid and hollow materials - (*) With prior testing - Applications other than heavy loads
Product denition:
- Special frame anchor
- Fitting with spacing
- Fastening wooden, PVC and alumnimum door and window frames.
- Wide range of lengths
- Supplied with pre-tted Pozidriv No. 3 head screws
d d0
tfix h1
Cross references :
Drill bit, concrete 10 mm, see page 680 - Drill bit, steel, see page 669
Coloured plastic caps (code 359 085), see page 221
Cross reference :
Anchors, SAUMUR FRAME / M, see page 221
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
dw d0
tfix h1
Load: Up to 103 Kg
Polyamide PA6 Polyamide PA6
+ Carbon steel 5.8 class + Austenitic stainless steel nail
5 m nail A2 - 50
TAPCO TC TAPCO TC / SS A2
5 / 5 x 30 1
9 5 35 Bucket 600 359 892
5 / 5 x 30 1
9 5 35 Bucket 2000 359 897
Cross references :
Drill bits, concrete, see page 680 - Distribution wedge (code 603 110), see page 646
Drive bit, Pozidriv No. 2 (code 325 010), see page 663
d0 : Support drilling diameter - dw : Flange head diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
dw d0
tfix h1
Load: Up to 154 Kg
Polyamide PA6 Polyamide PA6
+ Carbon steel 5.8 class + Austenitic stainless steel nail
5 m nail A2 - 50
TAPCO TF TAPCO TF / SS A2
10 / 30 x 80 #1
14 10 65 100 359 970
10 / 50 x 100 #1
14 10 65 100 359 972
10 / 85 x 135 #1
14 10 65 50 359 974
10 / 110 x 160 #1
14 10 65 50 359 976
Cross references :
Drill bits, concrete, see page 680 - Distribution wedge (code 603 110), see page 646
Drive bit, Pozidriv No. 2 (code 325 010), see page 663
d0 : Support drilling diameter - dw : Flange head diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
dw d0
tfix h1
Load: Up to 103 Kg
Polyamide PA6 Polyamide PA6
+ Carbon steel 5.8 class + Austenitic stainless steel nail
5 m nail A2 - 50
TAP-LARGE TAP-LARGE / SS A2
6 / 10 x 40 13 6 40 200
-
359 130 200 359 091
6 / 20 x 50 13 6 40 200 359 135 200 359 093
6 / 30 x 60 13 6 40 200 359 140 200 359 095
Cross references :
Drill bits, concrete, see page 680 - Drive bit, Pozidriv No. 2 (code 325 010), see page 663
d0 : Support drilling diameter - dw : Flange head diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Load: Up to 103 Kg
Polyamide PA6
+ Carbon steel 5.8 class
5 m nail
TAPCO GE
Cross references :
Drill bits, concrete, see page 680 - Drive bit, Pozidriv No. 2 (code 325 010), see page 663
Load: Up to 69 Kg
Polyamide PA6
+ Carbon steel 5.8 class
5 m nail
TAPCOL F7
Design use: Solid materials, cracked and uncracked concrete C20/25 - Hollow materials - (*) With prior
testing - High risk applications
Specication No. NX 0227 accepted by SOCOTEC
European Technical Approval ETA 10 / 0190 (ETAG 014)
Product denition:
- Special clip impact anchor with pre-tted nail
- Fast tting for serial fastening
x Pitch
- Used for tapped base clamp, 7 pitch 150
Cross reference :
Concrete drill bit, 6 mm, see page 680
d0 : Support drilling diameter - dw : Flange head diameter - Pattern : Bit drive recess - h1 : Support drilling depth - L : Length
- tx : Maximum fastenable thickness
Is
I
tfix hnom
d0
h1
hmin
Load: Up to 80 Kg
Polyamide PA6 Polyamide PA6
+ Screw in Carbon steel class 5.8 + Austenitic stainless steel screw
zinc plated 5 m A4 - 70
MARCOVIS FM-TXT MARCOVIS FM-TXT
PZ 3 PZ 3 / SS A4
/ tx x l d Screw ls d0 h1 Pack. Code Pack. Code
8 / 20 x 60 5,5 65 8 50 100 360 770 100 360 760
8 / 40 x 80 5,5 85 8 50 100 360 772 100 360 762
8 / 60 x 100 5,5 105 8 50 100 360 774 100 360 764
8 / 130 x 170 5,5 175 8 50 50 360 776 50 360 766
8 / 140 x 180 5,5 185 8 50 50 360 778 50 360 768
8 / 160 x 200 5,5 205 8 50 50 360 780 50 360 769
Design use: Uncracked concrete, solid materials - (*) With prior testing - High risk applications
Product denition:
- Universal anchor for solid materials (MP)
- High corrosion resistance with the stainless steel version
- Shallow tting depth: 50 mm
- Supplied complete: anchor + screw
- Through mounting
- Major mounting thicknesses
Cross references :
Concrete drill bit, 8 mm, see page 680 - Drive bit, Pozidriv No. 3 (code 325 030), see page 663
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Load: Up to 80 Kg
Polyamide PA6
+ Screw in Carbon steel 5.8
class 5 m
MARCOVIS MP
PZ 3
/ tx x l d Screw ls d0 h1 Pack. Code
8 / 40 x 80 5,5 85 8 50 100 358 720
8 / 60 x 100 5,5 105 8 50 100 358 722
8 / 80 x 120 5,5 125 8 50 50 358 724
8 / 95 x 135 5,5 140 8 50 50 358 727
8 / 120 x 160 5,5 165 8 50 50 358 742
Design use: Cracked and uncracked concrete, solid materials - (*) With prior testing - High risk applications
Product denition:
- Universal anchor for solid materials (MP)
- Shallow tting depth: 50 mm
- Supplied complete: anchor + screw
- Through mounting
- Major mounting thicknesses
Is
dw
tfix
d0
h1
Cross references :
Concrete drill bit, 8 mm, see page 680 - Drive bit, Pozidriv No. 3 (code 325 030), see page 663
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Load: Up to 140 Kg
Polyamide PA6
+ Screw in Carbon steel 5.8
class 5 m
MARCOVIS MP
TX 40
/ tx x l d Screw ls d0 h1 Pack. Code
10 / 10 x 60 7 65 10 65 50 358 700
10 / 30 x 80 7 85 10 65 50 358 704
10 / 50 x 100 7 105 10 65 50 358 706
10 / 65 x 115 7 120 10 65 50 358 708
10 / 85 x 135 7 140 10 65 50 358 710
10 / 110 x 160 7 165 10 65 50 358 712
Design use: Cracked and uncracked concrete, solid materials - (*) With prior testing - High risk applications
Specication DX 1415 accepted by SOCOTEC
Product denition:
- Universal anchor for solid materials (MP)
- Shallow tting depth: 50 mm
- Supplied complete: anchor + screw
- Through mounting
- Major mounting thicknesses
Is
I
tfix
d0
h1
Cross references :
Concrete drill bit, 10 mm, see page 680 - Drive bit, Torx No. 40 (code 325 120), see page 663
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Load: Up to 140 Kg
Polyamide PA6
+ Screw in Carbon steel class 5.8
zinc plated 5 m
MARCOVIS MP
TH 13
/ tx x l d Screw ls d0 h1 Pack. Code
10 / 10 x 60 7 65 10 65 50 358 680
10 / 30 x 80 7 85 10 65 50 358 684
10 / 50 x 100 7 105 10 65 50 358 686
10 / 65 x 115 7 120 10 65 50 358 688
10 / 85 x 135 7 140 10 65 50 358 690
10 / 110 x 160 7 165 10 65 50 358 692
Design use: Cracked and uncracked concrete, solid materials - (*) With prior testing - High risk applications
Specication DX 1415 accepted by SOCOTEC
Product denition:
- Universal anchor for solid materials (MP)
- Shallow tting depth: 50 mm
- Supplied complete: anchor + screw
- Through mounting
- Major mounting thicknesses
Is
I
tfix
d0
h1
Cross references :
Concrete drill bit, 10 mm, see page 680 - Hex. Socket, 13 mm (code 323 525), see page 660
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Is
I
tfix
d0
h1
Load: Up to 177 Kg
Polyamide PA6 Polyamide PA6
+ Screw in Carbon steel class 5.8 + Austenitic stainless steel
zinc plated 5 m screw A4 - 50
MARCOVIS TUP4 MARCOVIS TUP4
TX TX / SS A4
/ tx x l d Screw ls d0 h1 Pack. Code Pack. Code
8 / 10 x 80 5,5 85 8 80 100 358 880 100 358 885
8 / 30 x 100 5,5 105 8 80 50 358 881 50 358 886
8 / 50 x 120 5,5 125 8 80 50 358 882 50 358 887
Design use: Uncracked concrete, solid and hollow materials - (*) With prior testing
Product denition:
- Universal anchor for solid and hollow materials (TUP4)
- High corrosion resistance with the stainless steel version
- Supplied complete: anchor + screw
- Through mounting
- Major mounting thicknesses
- MARCOVIS 8 = Torx No. 30 head screws
- MARCOVIS 10 = Torx No. 40 head screws
Cross references :
Drill bits, concrete, 8 & 10 mm, see page 680
Drive bit, Torx No. 30 (code 325 115) & Torx No. 40 (code 325 120), see page 663
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Is
I
tfix
d0
Sw
h1
Load: Up to 177 Kg
Polyamide PA6 Polyamide PA6
+ Screw in Carbon steel class 5.8 + Austenitic stainless steel
zinc plated 5 m screw A4 - 50
MARCOVIS TUP4 MARCOVIS TUP4
TH TH / SS A4
/ tx x l d Screw ls d0 h1 Sw Pack. Code Pack. Code
8 / 10 x 80 5,5 85 8 80 10 100 358 890 100 358 895
8 / 30 x 100 5,5 105 8 80 10 50 358 891 50 358 896
8 / 50 x 120 5,5 125 8 80 10 50 358 892 50 358 897
Design use: Uncracked concrete, solid and hollow materials - (*) With prior testing
Product denition:
- All purpose anchor for solid and hollow materials (TUP4)
- High corrosion resistance with the stainless steel version
- Supplied complete: anchor + screw
- Through mounting
- Major mounting thicknesses
- MARCOVIS 8 = 10 mm hex. head screws
- MARCOVIS 10 = 13 mm hex. head screws
- MARCOVIS 12 = 17 mm hex. head screws
N New
Cross references :
Drill bits, concrete, 8, 10 & 12 mm, see page 680
Hex. head 10 (code 323 510) & 13 mm (code 323 525) screws, see page 660
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
hnom
hmin
Load : up to 250 Kg
Polyamide PA6
+ Screw in Carbon steel class 4.8
zinc plated 5 m
MARCOVIS TUPP
Design use: Uncracked concrete, solid and hollow materials - (*) With prior testing
Product denition:
- Universal anchor for solid and hollow materials
- Supplied complete: anchor + screw
- Through mounting
- Major mounting thicknesses
Cross references:
Drill bits, concrete, 16 mm, see page 680
Hex. head 19 mm (code 323 516) screws, see page 679
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
d d0
h1
hmin
Load: Up to 138 Kg
Polyamide PA6 Polyamide PA6
+ Screw in Carbon steel class 5.8 + Austenitic stainless steel
zinc plated 5 m screw A4 - 50
MARCOVIS FM-X5 MARCOVIS FM-X5
TF TX TF TX / SS A4
/ tx x l d Screw ls d0 h1 Pack. Code Pack. Code
8 / 10 x 80 6 85 8 80 100 360 500 100 360 550
8 / 30 x 100 6 105 8 80 50 360 502 50 360 552
8 / 50 x 120 6 125 8 80 50 360 504 50 360 554
8 / 80 x 150 6 155 8 80 50 360 505 50 360 551
8 / 100 x 170 6 175 8 80 50 360 507 50 360 553
Design use: Cracked and uncracked concrete, solid and hollow materials - (*) With prior testing
European Technical Approval ETA-10/0425 (ETAG 020 - categories A, B & C)
Product denition:
- All purpose anchor for solid and hollow materials
- High corrosion resistance with the stainless steel version
- Supplied complete: anchor + screw
- Through mounting
- Major mounting thicknesses
- Smooth insertion (low tightening torque)
- Extra-exible high quality Nylon
- MARCOVIS 8 = Torx No. 30 head screws
- MARCOVIS 10 = Torx No. 40 head screws
Cross references :
Drill bits, concrete, 8 & 10 mm, see page 680
Drive bit, Torx No. 30 (code 325 115) & Torx No. 40 (code 325 120), see page 663
Coating spacer for 8 mm hole (code 603 110), see page 646
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
d d0 13
h1 19
hmin
Load: Up to 138 Kg
Polyamide PA6 Polyamide PA6
+ Screw in Carbon steel class 5.8 + Austenitic stainless steel
zinc plated 5 m screw A4 - 50
MARCOVIS FM-X5 MARCOVIS FM-X5
TH 13 TH 13 / SS A4
/ tx x l d Screw ls d0 h1 Pack. Code Pack. Code
10 / 15 x 85 7 90 10 80 50 360 600 50 360 650
10 / 30 x 100 7 105 10 80 50 360 602 50 360 652
10 / 45 x 115 7 120 10 80 50 360 604 50 360 654
10 / 65 x 135 7 140 10 80 50 360 606 50 360 656
10 / 90 x 160 7 165 10 80 50 360 608 50 360 658
Design use: Cracked and uncracked concrete, solid and hollow materials - (*) With prior testing
European Technical Approval ETA-10/0425 (ETAG 020 - Categories A, B & C)
Product denition:
- All purpose anchor for solid and hollow materials
- High corrosion resistance with the stainless steel version
- Supplied complete: anchor + screw
- Through mounting
- Major mounting thicknesses
- Smooth insertion (low tightening torque)
- Extra-exible high quality Nylon
- Flange for 19 mm screw
Cross references :
Drill bits, concrete, 10 mm, see page 680 - Hex. head 13 mm socket (code 323 525), see page 660
Drive bit, Torx No. 40 (code 325 120), see page 663
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Is
I
tfix hnom
d d0 13
h1 19
hmin
Load: Up to 138 Kg
Polyamide PA6 Polyamide PA6
+ Screw in Carbon steel class 5.8 + Austenitic stainless steel
zinc plated 5 m screw A4 - 50
MARCOVIS FM-X5 MARCOVIS FM-X5
CL TH 13 CL TH 13 / SS A4
/ tx x l d Screw ls d0 h1 Pack. Code Pack. Code
10 / 15 x 85 7 90 10 80 50 360 700 50 360 750
10 / 30 x 100 7 105 10 80 50 360 702 50 360 752
10 / 45 x 115 7 120 10 80 50 360 704 50 360 754
10 / 65 x 135 7 140 10 80 50 360 706 50 360 756
10 / 90 x 160 7 165 10 80 50 360 708 50 360 758
Design use: Cracked and uncracked concrete, solid and hollow materials - (*) With prior testing
European Technical Approval ETA-10/0425 (ETAG 020 - Categories A, B & C)
Product denition:
- All purpose anchor for solid and hollow materials
- High corrosion resistance with the stainless steel version
- Supplied complete: anchor + screw
- Through mounting
- Major mounting thicknesses
- Smooth insertion (low tightening torque)
- Extra-exible high quality Nylon
- Flange for 19 mm screw
Cross references :
Drill bits, concrete, 10 mm, see page 680 - Hex. head, 13 mm (code 323 525), see page 660
Drive bit, Torx No. 40 (code 325 120), see page 663
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
13
19
Load: Up to 114 Kg
Polyamide PA6 Polyamide PA6
+ Screw in Carbon steel class 5.8 + Austenitic stainless steel
zinc plated 5 m screw A4 - 50
MARCOVIS FM-X5s MARCOVIS FM-X5s
TH 13 TH 13 / SS A4
/ tx x l d Screw ls d0 h1 Pack. Code Pack. Code
10 / 10 x 60 7 65 10 60 50 360 630 50 360 640
10 / 30 x 80 7 85 10 80 50 360 634 50 360 644
Design use: Cracked and uncracked concrete, solid and hollow materials - (*) With prior testing
European Technical Approval in progress (ETAG 020)
Product denition:
- All purpose anchor for solid and hollow materials
- Supplied complete: anchor + screw
- Through mounting
- Smooth insertion (low tightening torque)
- Extra-exible high quality Nylon
- Ideal to x bracket facade
Cross references :
Drill bits, concrete, 10 mm, see page 680 - Hex. head 13 mm socket (code 323 525), see page 660
Drive bit, Torx No. 40 (code 325 120), see page 663
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - l : Length - tx : Maximum fastenable thickness
13
19
Load: Up to 114 Kg
Polyamide PA6 Polyamide PA6
+ Screw in Carbon steel class 5.8 + Austenitic stainless steel
zinc plated 5 m screw A4 - 50
MARCOVIS FM-X5s MARCOVIS FM-X5s
CL TH 13 CL TH 13 / SS A4
/ tx x l d Screw ls d0 h1 Pack. Code Pack. Code
10 / 10 x 60 7 65 10 60 50 360 610 50 360 620
10 / 30 x 80 7 85 10 80 50 360 614 50 360 624
Design use: Cracked and uncracked concrete, solid and hollow materials - (*) With prior testing
European Technical Approval in progress (ETAG 020)
Product denition:
- All purpose anchor for solid and hollow materials
- Supplied complete: anchor + screw
- Through mounting
- Smooth insertion (low tightening torque)
- Extra-exible high quality Nylon
- Ideal to x bracket facade
Cross references :
Drill bits, concrete, 10 mm, see page 680 - Hex. head 13 mm socket (code 323 525), see page 660
Drive bit, Torx No. 40 (code 325 120), see page 663
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - l : Length - tx : Maximum fastenable thickness
dw Load: Up to 200 Kg
Sw
Polyamide PA6 + Brass
+ Screw in Carbon steel
class 5.8 zinc plated 5 m
BLOC
M / tx x l d Sw dw d0 h1 Pack. Code
8 / 3,5 x 70 M8 13 18 12 80 100 358 980
10 / 4 x 75 M 10 17 24 14 80 50 358 982
Design use: Solid and hollow materials - (*) With prior testing - Applications excluding heavy loads
Product denition:
- Special anchor for hollow concrete blocks
- Supplied complete: anchor + screw
Cross references :
Drill bits, concrete, see page 680 - Hex. head, 13 or 17 mm, see page 660
d : Nominal diameter - d0 : Support drilling diameter - dw : Flange head diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head
- tx : Maximum fastenable thickness
Load: Up to 46 Kg
Aluminium alloy
+ Stainless steel nail
DRIVCO
/ tx x l d0 Pack. Code
4,8 / 1 x 16 5 100 276 650
4,8 / 5 x 20 5 100 276 655
4,8 / 11 x 26 5 100 276 660
4,8 / 15 x 30 5 100 276 685
4,8 / 20 x 35 5 100 276 687
4,8 / 25 x 40 5 100 276 690
4,8 / 30 x 45 5 100 276 695
I 4,8 / 35 x 50 5 100 276 697
Design use: Solid materials - Stone (*) With prior testing
Product denition:
15
d0
- Pre-tted impact nail anchor
- Fast tting
tfix h1 - Fastener cannot be removed
- High corrosion resistance
- Wide head, 15 mm
- Head painting on request
Cross reference :
Drill bit, concrete 5 mm, see page 680
Load: Up to 108 Kg
Zamac alloy (zinc/alu)
+ Nail in Carbon steel zinc plated
5 m
TAPDUR
/ tx x l d0 h1 Pack. Code
6 / 5 x 30 6 35 200 342 790
6 / 15 x 40 6 35 100 342 800
6 / 20 x 50 6 40 100 342 810
6 / 35 x 65 6 40 100 342 795
I
Design use: Solid materials - Stone (*) With prior testing
d0 Product denition:
- Pre-tted impact nail anchor
tfix h1 - Fast tting
- Fastener cannot be removed
- Wide 14 mm head
Cross reference :
Concrete drill bit, 6 mm, see page 680
d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
10 d0
tfix h1
Load: Up to 166 Kg
Hot dip galvanized steel Supracoat 3C coated steel
Resistance to corrosion Resistance to corrosion
= 15 Kesternich cycles = 30 Kesternich cycles
Test Report
NAILFIX / GC NAILFIX / 3C
Cross references :
Concrete drill bit, 5 mm, see page 680 - Pressure plates, see page 470
d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Load: Up to 41 Kg
Electrogalvanized steel
Test Report
HEMA DS
/ tx x l Pack. Code
6 / 10 x 60 100 343 023
6 / 40 x 90 100 343 026
6 / 80 x 130 100 343 027
8 / 10 x 90 #
50 343 028
8 / 25 x 115 #
50 343 090
8 / 45 x 130 #
50 343 095
Cross references :
Spreader washers, see page 470 - One-piece inserts, see page 679
THREADED ANCHOR-NAIL
Load: Up to 41 Kg
Electrogalvanized steel
Test Report
HEMA DF
8 / 10 x 90 #
125 50 343 275
8 / 25 x 115 #
125 50 343 290
8 / 45 x 130 #
125 50 343 295
I
Cross references :
Spreader washers, see page 470 - One-piece inserts, see page 679
Load: Up to 49 Kg
White phosphate steel
with Delta Tone
anticorrosion treatment
SPLITUB
x l d0 h1 Pack. Code
8,5 x 42 7 30 100 218 872
Cross references :
Concrete drill bit, 7 mm, see page 680 - RAPCO hangers, see page 521
Load: Up to 125 Kg
Carbon steel
SPLITCOF
x l d0 h1 Pack. Code
6 x 45 7 40 200 218 870
Cross references :
Concrete drill bit, 7 mm, see page 680 - RAPCO hangers, see page 521
Load: Up to 110 Kg
ZAMAC alloy
ZACFIX
x l d0 h1 Pack. Code
10 x 42 10 40 100 603 040
Design use: Cracked and uncracked concrete + (solid masonry * With prior testing)
Specication No. MX 0427 accepted by SOCOTEC
Product denition:
- Impact anchor for thin stone cladding (DTU 55.2)
- Fastening by round stapling
- Impact triggered expansion, fast tting
- Corrosion resistance, Zamac expansion anchor
- Coating stapled on with Zintane 4.8 mm wire
Cross references :
Drill bit, concrete 10 mm, see page 680 - Zintane wire (code 603 039), see page 638
CONCRETE SCREW
MASONRY SELF-TAPPING SCREW - HEX. HEAD
Load: Up to 262 Kg
Carbon steel zinc plated 5 m,
Supracoat 2C coated
Resistance to corrosion
= 15 Kesternich cycles
BETOFAST TH 13 / 2C
d x l tx d0 h1 Sw Pack. Code
7,5 x 45 15 6# 40 13 100 283 790
7,5 x 60 30 6# 40 13 100 283 792
7,5 x 80 50 6# 40 13 100 283 794
Sw
(#) Pre-drilling diameter: 6 or 6.5 mm depending on the quality of the concrete support (perform test on-site)
Design use: Solid materials - (*) With prior testing - Applications exclude heavy loads
Product denition:
- Self-tapping screw for masonry
Cross references :
Drill bits, concrete, see page 680 - Drive bit, hex. 13 mm (code 323 525), see page 660
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
CONCRETE SCREW
SOLID MATERIALS SELF-TAPPING SCREW - HEX. HEAD
Load: Up to 1,500 Kg
Carbon steel zinc plated 5 m
BETOFAST FM-CLK
d x l tx d0 h1 Sw Pack. Code
10 x 60 20 8 50 15 100 283 805
10 x 75 35 8 50 15 100 283 810
10 x 100 60 8 50 15 100 283 815
10 x 130 90 8 50 15 50 283 820
10 x 150 110 8 50 15 50 283 825
12 x 60 10 10 60 17 50 283 835
12 x 75 25 10 60 17 50 283 840
12 x 100 50 10 60 17 50 283 845
12 x 130 80 10 60 17 25 283 850
12 x 150 100 10 60 17 25 283 855
14 x 75 15 12 70 19 50 283 865
Sw 14 x 100 40 12 70 19 50 283 870
14 x 130 70 12 70 19 25 283 875
14 x 150 90 12 70 19 20 283 880
I
Cross references :
Drill bits, concrete, see page 680 - One-piece nutsetter, SDS PLUS standard, see page 679
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
Load: Up to 238 Kg
Brass
BRASS
d x l d0 h1 Pack. Code
M 6 x 24 8 35 200 358 085
M 8 x 30 10 40 100 358 088
M 10 x 34 12 45 100 358 083
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 308 - Flat washers, see page 503
Threaded rods, see page 290
Load: Up to 609 Kg
Lead / Tin / Antimony alloy
COBOL
d x l d0 h1 Pack. Code
M6 x 40 11 50 100 359 399
M8 x 40 14 50 100 359 400
M8 x 50 14 60 100 359 402
M 10 x 60 18 70 100 359 406
M 12 x 80 20 90 100 359 408
(#) All in one COBOL Pack. 200 - Handier for worksite use. Plastic bucket comprising: 200 COBOL M8x50 +
200 at washers, 18 mm zinc plated + 200 screws, hex. head TH 13 M8x70 zinc plated
Design use: Solid and hollow materials - (*) With prior testing
Recommended screw length: Anchor length (l) + thickness to tighten (t x) + 10 mm
Product denition:
- Universal lead anchor
- Strong hold in all friable or hollow materials *
- High corrosion resistance
- Pre-tted lock nut prevents slackening (M8, M10, M12)
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 307 - Flat washers, see page 503
Threaded rods, see page 290
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length
Load: Up to 240 Kg
Carbon steel class 5.8 zinc plated
5 m
TSA - S
M 8 / 15 x 60 M8 24 10 80 15 50 359 335
M 8 / 35 x 80 M8 24 10 100 15 50 359 336
dw Sw M 10 / 17 x 70 M 10 30 12 90 17 50 359 340
M 10 / 47 x 100 M 10 30 12 120 17 25 359 341
Design use: Solid and hollow materials - (*) With prior testing - Applications exclude heavy loads
Product denition:
- Multi-material anchor
- Anchor supplied pre-tted
- Wide washer
Cross reference :
Drill bits, concrete, see page 680
d : Nominal diameter - d0 : Support drilling diameter - dw : Flange head diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head
- tx : Maximum fastenable thickness
Load: Up to 400 Kg
Carbon steel class 5.8 zinc plated
5 m
TSA - N
M 12 / 10 x 65 M 12 26 16 85 20 359 356
M 12 / 56 x 111 M 12 26 16 130 10 359 357
M 12 / 92 x 147 M 12 26 16 170 10 359 358
Design use: Solid and hollow materials - (*) With prior testing - Applications exclude heavy loads
Product denition:
- Multi-material anchor
- Anchor supplied pre-tted
Cross reference :
Drill bits, concrete, see page 680
d : Nominal diameter - d0 : Support drilling diameter - dw : Flange head diameter - h1 : Support drilling depth - L : Length
- tx : Maximum fastenable thickness
hnom = l
hef
df d
Tinst
d0
tfix h1
hmin
Load: Up to 1,925 Kg
Carbon steel class 8.8 Austenitic stainless steel
zinc plated 5 m A4 - 70
MP3 MP3 / SS A4
Design use: Solid and hollow materials - (*) With prior testing - Applications for heavy loads
European Technical Approval ETA 09 / 0067 (M6 to M12) Option 7, Method A (Carbon steel)
European Technical Approval ETA 09 / 0357 (M6 to M12) Option 7, Method A (stainless steel)
European Technical Approval ETA 10 / 0074 (M6 to M12) Part 6 (Carbon steel)
European Technical Approval ETA 10 / 0093 (M6 to M12) Part 6 (stainless steel)
Product denition:
- Multi-material anchor
- High corrosion resistance with the stainless steel version
- Anchor supplied pre-tted
- Safety: Self-expanding anchor
- Non through fastening
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 307 - Flat washers, see page 503
Threaded rods, see page 290
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length
hnom = l
hef
df d
Tinst
d0 dw Sw
tfix h1
hmin
Load: Up to 1,925 Kg
Carbon steel class 8.8 Austenitic stainless steel
zinc plated 5 m A4 - 70
MP3-S MP3-S / SS A4
Design use: Solid and hollow materials - (*) With prior testing - Applications for heavy loads
European Technical Approval ETA 09 / 0067 (M6 to M12) Option 7, Method A (Carbon steel)
European Technical Approval ETA 09 / 0357 (M6 to M12) Option 7, Method A (stainless steel)
European Technical Approval ETA 10 / 0074 (M6 to M12) Part 6 (Carbon steel)
European Technical Approval ETA 10 / 0093 (M6 to M12) Part 6 (stainless steel)
Product denition:
- Multi-material anchor
- High corrosion resistance with the stainless steel version
- Anchor supplied pre-tted
- Safety: Self-expanding anchor
- Non through fastening
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 307 - Flat washers, see page 503
Threaded rods, see page 290
d : Nominal diameter - d0 : Support drilling diameter - dw : Flange head diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head
- tx : Maximum fastenable thickness
hnom = l
hef
df d
Tinst
d0 dw Sw
tfix h1
hmin
Load: Up to 1,925 Kg
Carbon steel class 8.8 Austenitic stainless steel
zinc plated 5 m A4 - 70
Design use: Solid and hollow materials - (*) With prior testing - Applications exclude heavy loads
European Technical Approval ETA 09 / 0067 (M6 to M12) Option 7, Method A (Carbon steel)
European Technical Approval ETA 09 / 0357 (M6 to M12) Option 7, Method A (stainless steel)
European Technical Approval ETA 10 / 0074 (M6 to M12) Part 6 (Carbon steel)
European Technical Approval ETA 10 / 0093 (M6 to M12) Part 6 (stainless steel)
Product denition:
- Multi-material anchor
- High corrosion resistance with the stainless steel version
- Anchor supplied pre-tted
- Safety: Self-expanding anchor
- Non through fastening
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 307 - Flat washers, see page 503
Threaded rods, see page 290
d : Nominal diameter - d0 : Support drilling diameter - dw : Flange head diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head
- tx : Maximum fastenable thickness
Load: Up to 1,925 Kg
Carbon steel class 5.8 zinc plated
5 m
MP3-N
d / tx x l d0 h1 Sw Pack. Code
M6 / 15 x 45 10 60 10 50 359 522
M8 / 15 x 50 12 70 13 50 359 524
M 10 / 25 x 60 15 80 17 25 359 526
M 12 / 25 x 80 18 100 19 20 359 528
Design use: Solid and hollow materials - (*) With prior testing - Applications exclude heavy loads
Product denition:
- Multi-material anchor
- Anchor supplied pre-tted
- Safety: Self-expanding anchor
- Non through fastening
Sw
hnom = l
hef
df d
d0
Tinst
tfix h1
hmin
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 307 - Flat washers, see page 503
Threaded rods, see page 290
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
Load: Up to 1,925 Kg
Carbon steel class 8.8 zinc plated
5 m
MP3-L TH
d / tx x l d0 h1 Sw Pack. Code
M6 / 25 x 70 10 60 10 50 359 533
M8 / 25 x 75 12 70 13 50 359 535
M 10 / 25 x 85 15 80 17 25 359 537
M 12 / 25 x 105 18 100 19 20 359 539
Design use: Solid and hollow materials - (*) With prior testing - Applications for heavy loads
European Technical Approval ETA 09 / 0067 (M6 to M12) Option 7, Method A (Carbon steel)
European Technical Approval ETA 09 / 0357 (M6 to M12) Option 7, Method A (stainless steel)
European Technical Approval ETA 10 / 0074 (M6 to M12) Part 6 (Carbon steel)
European Technical Approval ETA 10 / 0093 (M6 to M12) Part 6 (stainless steel)
Product denition:
- Multi-material anchor
Sw
- Anchor supplied pre-tted
- Safety: Self-expanding anchor
- Non through fastening
l
hnom
hef
df
d
d0
Tinst
tfix h1
hmin
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 307 - Flat washers, see page 503
Threaded rods, see page 290
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
Load: Up to 1,925 Kg
Carbon steel class 8.8 zinc plated
5 m
MP3-L TF
d / tx x l d0 h1 Sw Pack. Code
M6 / 30 x 70 10 60 5 50 359 543
M8 / 30 x 75 12 70 6 50 359 545
M 10 / 30 x 85 15 80 8 25 359 547
M 12 / 30 x 105 18 100 10 20 359 549
Design use: Solid and hollow materials - (*) With prior testing - Applications for heavy loads
European Technical Approval ETA 09 / 0067 (M6 to M12) Option 7, Method A (Carbon steel)
European Technical Approval ETA 09 / 0357 (M6 to M12) Option 7, Method A (stainless steel)
European Technical Approval ETA 10 / 0074 (M6 to M12) Part 6 (Carbon steel)
European Technical Approval ETA 10 / 0093 (M6 to M12) Part 6 (stainless steel)
Sw
Product denition:
- Multi-material anchor
- Anchor supplied pre-tted
- Safety: Self-expanding anchor
l - Non through fastening
hnom
hef
df
d
d0
Tinst
tfix h1
hmin
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 307 - Flat washers, see page 503
Threaded rods, see page 290
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
Load: Up to 687 Kg
Carbon steel class 5.8 zinc plated
5 m
MP3-SECURIT
d / tx x l d0 h1 Pack. Code
M 8 / 25 x 75 12 70 50 358 935
Design use: Solid and hollow materials - (*) With prior testing - Applications exclude heavy loads
Product denition:
- Multi-material anchor
- Anchor supplied pre-tted
- Safety: Self-expanding anchor
- Non through fastening
Torx 40
l
hnom
hef
df
d
d0
Tinst
tfix h1
hmin
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 307 - Flat washers, see page 503
Threaded rods, see page 290 - SECURIT pattern, see page 302
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
d
Tinst
d0 17
tfix h1
Load: Up to 687 Kg
Carbon steel class 5.8 Austenitic stainless steel
zinc plated 5 m A4 - 70
MP3-CRS MP3-CRS / SS A4
Design use: Solid and hollow materials - (*) With prior testing - Applications exclude heavy loads
- Tightening torque (T inst): 15 N.m.
Product denition:
- Multi-material anchor
- High corrosion resistance with the stainless steel version
- Anchor supplied pre-tted
- Safety: Self-expanding anchor
- Non through fastening
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 307 - Flat washers, see page 503
Threaded rods, see page 290 - Securit pattern, see page 302
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
d0
d h1
Load: Up to 1,250 Kg
Carbon steel 5 m Austenitic stainless steel
A2
Test Report
FRAPCO FRAPCO / SS A2
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 307 - Flat washers, see page 503
Threaded rods, see page 290 - Installation tools for FRAPCO, see page 253
FRAPCO TOOL
Cross reference :
FRAPCO anchors, see page 253
Mi d d0 Sw
tfix h1
Load: Up to 3,086 Kg
Carbon steel class 8.8 Austenitic stainless steel
zinc plated 5 m A4 - 70
BARACO FM 753
BARACO FM 753
SS A4
d / tx x l Mi d0 h1 Sw Pack. Code Pack. Code
M 6 / 3 x 45 # A 6 45 10 200 344 001
M 6 / 15 x 65 * B 6 50 10 100 344 008 100 344 208
M 6 / 35 x 85 * C 6 50 10 100 344 011 100 344 209
M8 / 5 x 50 * #
A 8 50 13 100 344 031 100 344 213
M8 / 7 x 65 B 8 60 13 100 344 041 50 344 221
M8 / 15 x 75 C 8 60 13 100 344 036 100 344 236
M8 / 30 x 90 D 8 60 13 100 344 033 100 344 237
M8 / 55 x 115 E 8 60 13 100 344 034 100 344 238
M8 / 75 x 135 F 8 60 13 100 344 025
M8 / 105 x 165 G 8 60 13 50 344 046
M 10 / 5 x 60 * #
A 10 55 17 50 344 057 50 344 241
M 10 / 5 x 75 B 10 70 17 50 344 058 50 344 243
M 10 / 20 x 90 C 10 70 17 50 344 059 50 344 245
M 10 / 50 x 120 D 10 70 17 50 344 061 50 344 247
M 10 / 70 x 145 E 10 70 17 25 344 062
M 10 / 100 x 170 F 10 70 17 25 344 064
M 10 / 140 x 210 #
G 10 70 17 25 344 009
M 12 / 7 x 80 * #
A 12 85 19 50 344 121 50 344 252
M 12 / 10 x 100 B 12 85 19 50 344 140 50 344 253
M 12 / 20 x 110 C 12 85 19 50 344 148 50 344 254
M 12 / 45 x 135 D 12 85 19 25 344 143 25 344 255
M 12 / 70 x 160 E 12 85 19 25 344 151 25 344 256
M 12 / 100 x 185 F 12 85 19 25 344 351 25 344 257
M 12 / 115 x 200 #
- 12 85 19 20 344 156
M 12 / 135 x 220 #
- 12 85 19 20 344 157
M 12 / 155 x 240 #
- 12 85 19 20 344 158
M 12 / 170 x 255 #
- 12 85 19 20 344 159
M 12 / 200 x 285 #
- 12 85 19 20 344 181
M 12 / 215 x 300 #
- 12 85 19 20 344 182
M 12 / 240 x 325 #
- 12 85 19 20 344 183
M 12 / 270 x 355 #
- 12 85 19 20 344 195
Mi d d0 Sw
tfix h1
M 20 / 30 x 170 #
A 20 130 30 10 344 192
M 20 / 75 x 215 #
B 20 130 30 10 344 194
M 24 / 10 x 180 #
- 24 165 36 10 344 103
M 24 / 50 x 220 #
- 24 165 36 10 344 373
Cross reference :
Drill bits, concrete, see page 680
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Mi : Identication - Sw : Hex. head
- tx : Maximum fastenable thickness
Mi d d0 Sw
tfix h1
Load: Up to 3,825 Kg
Carbon steel class 8.8 Austenitic stainless steel
zinc plated 5 m A4 - 70
BARACO FM 753 CRACK
BARACO FM 753 CRACK
SS A4
d / tx x l Mi d0 h1 Sw Pack. Code Pack. Code
M8 / 4 x 68 A 8 70 13 100 344 088 100 344 282
M8 / 10 x 75 B 8 70 13 100 344 090 100 344 284
M8 / 25 x 90 C 8 70 13 100 344 092 100 344 286
M8 / 50 x 115 D 8 70 13 100 344 094 100 344 288
M8 / 70 x 135 E 8 70 13 100 344 096 100 344 290
M8 / 100 x 165 F 8 70 13 50 344 198 50 344 292
Design use: Cracked and uncracked concrete - Applications for heavy loads
For BARACO FM 753 CRACK (carbon steel): European Technical Approval ETA 09 / 0056 (M8 to M16) Option 1 Method A
For BARACO FM 753 CRACK / SS A4: European Technical Approval ETA 10 / 0293 - Option 1 Method A
Product denition:
- Expanding safety screw anchor
- High corrosion resistance with the stainless steel version
- Usable in tension zones and in cracked concrete
- High resistance in cracked and uncracked concrete
- Fitting safety: Self-expanding anchor
- Supplied pre-tted
Cross reference :
Drill bits, concrete, see page 680
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Mi : Identication - Sw : Hex. head
- tx : Maximum fastenable thickness
Load: Up to 6,428 Kg
Carbon steel class 8.8 zinc plated
5 m
ATS-S EVO
d / tx x l d0 h1 Sw Pack. Code
M 6 / 10 x 70 10 75 10 50 344 418
M 6 / 20 x 80 10 75 10 50 344 420
M 6 / 50 x 110 10 75 10 50 344 422
M 8 / 10 x 80 12 85 13 25 344 423
M 8 / 20 x 90 12 85 13 25 344 424
M 8 / 50 x 120 12 85 13 25 344 426
M 10 / 10 x 90 15 95 17 20 344 425
M 10 / 20 x 100 15 95 17 20 344 428
M 10 / 50 x 130 15 95 17 20 344 430
M 10 / 100 x 180 15 95 17 20 344 431
Design use: Cracked and uncracked concrete - Applications for heavy loads
European Technical Approval ETA 10 / 0423 (M6 to M16) Option 1 Method A
Product denition:
- Anchoring bolt type safety anchor
- Fitting safety: Self-expanding anchor
- High resistance to shearing loads
- Supplied pre-tted
Cross reference :
Drill bits, concrete, see page 680
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
Load: Up to 6,428 Kg
Carbon steel class 8.8 zinc plated
5 m
ATS-N EVO
d / tx x l d0 h1 Sw Pack. Code
M 6 / 10 x 70 10 75 10 50 344 441
M 6 / 20 x 80 10 75 10 50 344 440
M 6 / 50 x 110 10 75 10 50 344 442
M 8 / 10 x 80 12 85 13 25 344 449
M 8 / 20 x 90 12 85 13 25 344 443
M 8 / 50 x 120 12 85 13 25 344 444
M 10 / 10 x 90 15 95 17 20 344 445
M 10 / 20 x 100 15 95 17 20 344 446
M 10 / 50 x 130 15 95 17 20 344 448
M 10 / 100 x 180 15 95 17 20 344 450
Design use: Cracked and uncracked concrete - Applications for heavy loads
European Technical Approval ETA 10 / 0423 (M6 to M16) Option 1 Method A
Product denition:
- Anchoring bolt type safety anchor
- Fitting safety: Self-expanding anchor
- High resistance to shearing loads
- Supplied pre-tted
Cross reference :
Drill bits, concrete, see page 680
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
Load: Up to 6,428 Kg
Carbon steel class 8.8 zinc plated
5 m
ATS-SC EVO
d / tx x l d0 h1 Sw Pack. Code
M 6 / 15 x 70 10 75 5 50 344 539
M 6 / 25 x 80 10 75 5 50 344 540
M 8 / 16 x 80 12 85 6 25 344 542
M 8 / 26 x 90 12 85 6 25 344 544
M 10 / 17 x 90 15 95 8 20 344 546
M 10 / 27 x 100 15 95 8 20 344 547
Design use: Cracked and uncracked concrete - Applications for heavy loads
European Technical Approval ETA 10 / 0423 (M6 to M16) Option 1 Method A
Product denition:
Sw - Anchoring bolt type safety anchor
- Fitting safety: Self-expanding anchor
- High resistance to shearing loads
I - Supplied pre-tted
d d0
tfix h1
Cross reference :
Drill bits, concrete, see page 680
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
Load: Up to 2,560 Kg
Carbon steel class 5.8 zinc plated
5 m
PFL FM 744
d x l d0 h1 Pack. Code
M6 x 40 10 55 50 344 465
M8 x 50 14 65 50 344 470
M 10 x 60 16 75 25 344 475
M 12 x 80 20 95 20 344 480
Design use: Solid materials and uncracked concrete - (*) With prior testing - Applications for heavy loads
European Technical Approval ETA 05 / 169 Option 7 Method A
I Recommended screw length: Anchor length (l) + thickness to tighten (t x)
Product denition:
- Safety anchor, expands when tightened
- Shallow insertion depth
d d0 - Reduced edge and centre distances
- Heavy loads
- Fitting safety: Self-expanding anchor
h1
Cross references :
Drill bits, concrete, see page 680 - Metal screws, see page 307 - Flat washers, see page 503
Threaded rods, see page 290
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length
Load: Up to 2,560 Kg
Carbon steel class 5.8 zinc plated
5 m
PFL-S FM 744
d / tx x l d0 h1 Sw Pack. Code
M6 / 10 x 40 10 55 10 50 344 490
M8 / 10 x 50 14 65 13 50 344 492
M 10 / 20 x 60 16 75 17 25 344 494
M 12 / 10 x 80 20 95 19 20 344 496
Design use: Solid materials and uncracked concrete - (*) With prior testing - Applications for heavy loads
European Technical Approval ETA 05 / 169 Option 7 Method A
Product denition:
- Safety anchor, expands when tightened
- Anchor supplied pre-tted
- Shallow insertion depth
- Reduced edge and centre distances
- Heavy loads
- Fitting safety: Self-expanding anchor
Sw
d d0
tfix h1
Cross reference :
Drill bits, concrete, see page 680
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
CHEMICAL CAPSULE
TWO COMPONENT CAPSULE CONTAINS RESIN + HARDENER
Load: Up to 6,000 Kg
Resin + Hardener + Quartz + Glass
FRP CAPSULE
d d0
Design use: Concrete and (solid materials* with prior testing) - Applications for heavy loads
h1
Hardening time prior to tightening: +20C = 10 min. / +10C to +20C = 20 min. / 0C to +10 C = 1 hour /
-5C to 0C = 5 hours
Storage temperature: + 5C and + 25C
Storage life: 24 months
Product denition:
- Chemical capsule anchor system
- For fastening very close to edges (40 mm for M8)
- For heavy loads, A4 stainless steel version
- No stress applied within the supporting material
- Perfect resin dosage, no waste
Cross references :
Drill bits, concrete, see page 680 - Threaded rods, see page 263 - Brushes (code 344 856), see page 702
Blower pump (code 344 854), see page 702
d0 : Support drilling diameter - h1 : Support drilling depth
CHEMICAL CAPSULE
THREADED ROD WITH HEX. DRIVE WITH NUT AND WASHER
I
d0 Sw
H
tfix h1
Design use: Concrete and (solid materials* with prior testing) - Applications for heavy loads
Fitting tool supplied with every box of threaded rods
Cross reference :
FRP capsules, see page 262
d : Nominal diameter - H : Hex. drive - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
Load: Up to 5,300 Kg
Urethane acrylate, styrene-free
CHIMFORT GREEN
Cross references :
Drill bits, concrete, see page 680 - Additional nozzle, see page 272
Brushes (code 344 856), see page 702 - Blower pump (code 344 854), see page 702
Sleeve, see page 264 - Threaded rods, see page 266 - Threaded nuts, see page 265
Guns, see page 701
d d0
h1
Cross references :
Drill bits, concrete, see page 680 - Brushes (code 344 856), see page 702
Blower pump (code 344 854), see page 702 - Threaded rods, see page 266 - Threaded nuts, see page 265
CHIMFORT GREEN chemical anchoring systems, see page 264
d0 : Support drilling diameter - h1 : Support drilling depth - L : Length
I (Sleeve)
d d0
h1
Cross references :
Drill bits, concrete, see page 680 - Brushes (code 344 856), see page 702
Blower pump (code 344 854), see page 702 - Threaded rods, see page 266 - Threaded nuts, see page 265
CHIMFORT GREEN chemical anchoring systems, see page 264
d d0
h1
Cross references :
Drill bits, concrete, see page 680 - Brushes (code 344 856), see page 702
Blower pump (code 344 854), see page 702 - Sleeve, see page 264
CHIMFORT GREEN chemical anchoring systems, see page 264
d : Nominal diameter - d0 : Support drilling diameter - L : Length
tfix
Sw
d
Cross references :
Drill bits, concrete, see page 680 - Brushes (code 344 856), see page 702
Blower pump (code 344 854), see page 702 - Sleeve, see page 264
CHIMFORT GREEN chemical anchoring systems, see page 264
d : Nominal diameter - L : Length - Sw : Hex. head - tx : Maximum fastenable thickness
d0 Sw
H
tfix h1
Cross references :
Drill bits, concrete, see page 680 - Brushes (code 344 856), see page 702
Blower pump (code 344 854), see page 702
CHIMFORT GREEN chemical anchoring systems, see page 264
d : Nominal diameter - d0 : Support drilling diameter - H : Hex. drive - h1 : Support drilling depth - L : Length - Sw : Hex. head
- tx : Maximum fastenable thickness
Load: Up to 5,600 Kg
Methacrylate resin,
styrene-free
CHIMFORT ATE
Design use: Solid materials and uncracked concrete - (*) With prior testing
Use: Anchoring and rebar applications
European Technical Approval ETA 06 / 0202 Stainless (M8 to M20)
European Technical Approval ETA 06 / 0198 Carbon steel (M8 to M20) Option 8 Method A
European Technical Approval ETA 011 / 0116 ( 8 32) TR 23 for rebar applications
Adjust System by Etanco: Performance - Savings - Modularity
Hardening time prior to tightening: +20C = 45 min. / +10C = 75 min. / +5C = 105 min. / 0C = 150 min. /
-5C = 5 hours
Storage temperature: + 5C and + 25C
Storage life: 12 months
Cartridges supplied with a nozzle
Product denition:
- Chemical anchors in reusable cartridges
- Mounts in all solid core soft and friable materials
- No stress applied to the support material
- Simple and precise injection and dosage using the gun
Cross references :
Drill bits, concrete, see page 680 - Additional nozzles, see page 272
Brushes (code 344 856), see page 702 - Blower pump (code 344 854), see page 702
Threaded rods, see page 266 - Guns, see page 701
d d0
tfix h1
Cross references :
Drill bits, concrete, see page 680 - Brushes (code 344 856), see page 702
Blower pump (code 344 854), see page 702 - Guns, see page 701 - CHIMFORT ATE, see page 268
d : Nominal diameter - d0 : Support drilling diameter - L : Length - Sw : Hex. head
d0 Sw
H
tfix h1
Cross references :
Drill bits, concrete, see page 680 - Brushes (code 344 856), see page 702
Blower pump (code 344 854), see page 702
CHIMFORT GREEN chemical anchoring systems, see page 264
d : Nominal diameter - d0 : Support drilling diameter - H : Hex. drive - h1 : Support drilling depth - L : Length - Sw : Hex. head
- tx : Maximum fastenable thickness
d0 Sw
12 8
d
tfix h1
Cross references :
Drill bits, concrete, see page 680 - Brushes (code 344 856), see page 702
Blower pump (code 344 854), see page 702 - Guns, see page 701 - CHIMFORT ATE, see page 268
d : Nominal diameter - d0 : Support drilling diameter - L : Length - Sw : Hex. head
Load: Up to 9,751 Kg
Pure epoxy, styrene-free
CHIMFORT HA
Cross references :
Drill bits, concrete, see page 680 - Additional nozzles, see page 272
Brushes (code 344 856), see page 702 - Blower pump (code 344 854), see page 702
Guns, see page 701
CHIMFORT NOZZLE
The graduation on the nozzle means that the right amount of mortar can be used for every anchor.
Cross references :
CHIMFORT GREEN chemical anchoring, see page 264 - CHIMFORT ATE, see page 268
CHIMFORT HA, see page 271
Cross references :
CHIMFORT GREEN chemical anchoring, see page 264 - CHIMFORT ATE, see page 268
Load: Up to 10 Kg
White polypropylene
EXCO 32
/ tx x l d0 # h1 # Pack. Code
8 / 30 x 50 8 40 500 358 200
8 / 40 x 70 8 40 500 358 205
8 / 60 x 90 8 40 500 358 210
8 / 80 x 110 8 40 500 358 220
8 / 100 x 130 8 40 500 358 232
tfix h1 (#) Drill 6 mm hole in cellular concrete / Drill 7 mm hole in materials that crumble
Design use: Fastening rigid insulation - All solid materials - (*) With prior testing
Product denition:
- Impact anchor. Hammered in
32 d0 - Rough 32 mm head to hold coating
- Various lengths available for up to 100 mm of insulation
- Fast: Shallow drilling depth
I - Not UV resistant
Cross reference :
Drill bit, concrete 8 mm, see page 680
Load: Up to 17 Kg
Black polypropylene
INCO Black
/ tx x l d0 # h1 Pack. Code
8 / 40 x 60 8 30 500 358 101
tfix h1
8 / 60 x 80 8 30 500 358 102
hnom
8 / 80 x 100 8 30 500 358 104
8 / 100 x 120 8 30 250 358 105
d0
10 / 60 x 90 10 40 500 358 172
10 / 80 x 110 10 40 250 358 174
10 / 110 x 140 10 40 200 358 176
(#) Support drilling diameter (except for cellular concrete: 6 mm drilling for INCO 8 - 8 mm for INCO 10)
I
Design use: Fastening exible insulation on a faade - All solid and hollow materials - (*) With prior testing
Drilling into cellular concrete: 6 mm drilling for INCO 8 - 8 mm for INCO 10
White polypropylene available on request
Product denition:
- Impact anchor: Hammered down
- Fast: Shallow drilling depth
- Extra wide 90 mm head
- Various lenghts avaialble, up to 110 mm insulation thickness
- Not UV resistant
Cross reference :
Drill bits, concrete, 8 & 10 mm, see page 680
d0# : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Load: Up to 17 Kg
Black polypropylene
INCO II Black
Design use: Fastening flexible insulation on a faade - All solid and hollow materials - (*) With prior testing
Specification No. EAD 9208 accepted by SOCOTEC
White polypropylene available on request
Product definition:
- Impact anchor: Hammered down
- Fast: Shallow drilling depth
tfix h1
- Extra wide 90 mm head
- Various lenghts avaialble, up to 220 mm insulation thickness
hnom - Not UV resistant
90
d0
Cross reference :
Drill bit, concrete, 8 mm, see page 680
d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tfix : Maximum fastenable thickness
Load: Up to 15 Kg
White polypropylene
ECO ISO
/ tx x l d0 h1 Pack. Code
10 / 40 x 70 10 50 250 358 640
10 / 60 x 90 10 50 250 358 642
10 / 90 x 120 10 50 250 358 644
10 / 110 x 140 10 50 250 358 646
10 / 130 x 160 10 50 250 358 648
10 / 150 x 180 10 50 250 358 650
Design use: Fastening rigid insulation - All solid and hollow materials - (*) With prior testing
Product denition:
- Impact anchor. Hammer in
- 60 mm head
- Numerous lengths available, up to 150 mm of insulation
- Expansion nail, 6 mm
- Not UV resistent
tfix hmin - Usage temperature: -30C to +70C
h1
hnom
60
d0
Cross reference :
Drill bit, concrete, 10 mm, see page 680
d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Load: Up to 12.5 Kg
Anchor: White polypropylene
Nail: Black polyamide
SUPER ISO II
/ tx m x l d0 tx h1 Pack. Code
10 / 45 x 90 10 40 - 50 50 300 358 560
10 / 65 x 110 10 60 - 70 50 200 358 562
10 / 75 x 120 10 70 - 80 50 200 358 564
10 / 90 x 135 10 85 - 95 50 200 358 566
10 / 105 x 150 10 100 - 110 50 200 358 568
10 / 125 x 170 10 120 - 130 50 200 358 570
10 / 145 x 190 10 140 - 150 50 200 358 572
10 / 155 x 200 10 150 - 160 50 200 358 574
10 / 175 x 220 10 170 - 180 50 200 358 576
tfix hmin
10 / 195 x 240 10 190 - 200 50 200 358 578
h1 10 / 215 x 260 10 210 - 220 50 200 358 580
hnom
d0
- Impact anchor. Hammer in
- 60 mm head + additional 140 mm washer for exible insulation
- Numerous lengths available, up to 220 mm of insulation
- Expansion nail, 5 mm
- Not UV resistent
- Usage temperature: -30C to +70C
Cross reference :
Drill bit, concrete, 10 mm, see page 680
Design use: Used with SUPER ISO II anchors to fasten exible insulation
Not UV resistant
Cross reference :
SUPER ISO II anchors, see page 276
d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Load: Up to 43 Kg
Anchor: White polypropylene
Screw: Zinc plated steel 5 m
FM-ISOPLUS
/ tx x l d0 h1 Pack. Code
8 / 70 x 120 8 75 200 357 120
8 / 90 x 140 8 75 200 357 140
8 / 110 x 160 8 75 200 357 160
8 / 130 x 180 8 75 200 357 180
8 / 150 x 200 8 75 200 357 200
8 / 170 x 220 8 75 200 357 220
8 / 190 x 240 8 75 200 357 240
8 / 210 x 260 8 75 200 357 260
8 / 230 x 280 8 75 200 357 280
t fix hmin 8 / 250 x 300 8 75 200 357 300
h1
hnom
Design use: Fastening rigid and semi-rigid insulation - All solid and hollow materials
European Technical Approval in progress (ETAG 014 A/B/C/E)
Point thermal transmittance = 0 W/K
Product denition:
- Deformation controlled expansion anchor for screwing-in
- 60 mm head
60
d0
- Numerous lengths available, up to 250 mm of insulation
- Anchor: White polypropylene
Screw 5 Tx25 : Zinc plated steel
- Usage temperature: -30C to 70C
- Not UV resistant
- Implementation temperature: 0C
l
Cross reference :
Drill bit, concrete, 8 mm, see page 680
d0 : Support drilling diameter - h1 : Support drilling depth - l : Length - tx : Maximum fastenable thickness
WASHER PSE
WASHER LM
CAP PSE
Metal
INSTALLATION TOOL
Pack. Code
1 357 904
INSTALLATION TOOL
Pack. Code
1 357 906
Load: Up to 25 Kg
/ tx m x l d0 tx h1 Pack. Code
8 / 45 x 100 8 40 - 60 70 200 358 500
8 / 65 x 120 8 60 - 70 70 200 358 502
8 / 85 x 140 8 80 - 90 70 200 358 504
8 / 105 x 160 8 100 - 110 70 200 358 506
8 / 125 x 180 8 120 - 130 70 200 358 508
8 / 145 x 200 8 140 - 150 70 200 358 510
8 / 165 x 220 8 160 - 170 70 200 358 512
8 / 205 x 260 8 200 - 210 70 200 358 514
8 / 245 x 300 8 240 - 250 70 200 358 516
8 / 305 x 360 8 300 - 310 70 200 358 518
8 / 345 x 400 8 340 - 350 70 100 358 520
d0
Cross reference :
Drill bit, concrete, 8 mm, see page 680
Design use: Used with MAX ISO anchors to fasten exible insulation
Not UV resistant
d0 : Support drilling diameter - h1 : Support drilling depth - L : Length - tx : Maximum fastenable thickness
IMPACT ANCHOR
WIDE HEAD ANCHOR 40 MM
RIGID INSULATION ANCHOR
tfix h1
d0
Load: Up to 28 Kg
Aluminium zinc alloy Austenitic stainless steel
(AZ 150) A2 - 50
france METAL-ISO METAL-ISO
AZ A2 SS
/ tx x l d0 # h1 # Pack. Code Pack. Code
9 / 10 x 60 8 - 8,5 60 250 343 510
9 / 30 x 80 8 - 8,5 60 250 343 500 250 343 520
9 / 50 x 100 8 - 8,5 60 250 343 519
9 / 60 x 110 8 - 8,5 60 250 343 502 250 343 522
9 / 70 x 120 8 - 8,5 60 250 343 507
9 / 90 x 140 8 - 8,5 60 250 343 504 250 343 524
9 / 100 x 150 8 - 8,5 60 250 343 509 250 343 525
9 / 120 x 170 8 - 8,5 60 250 343 506 250 343 526
9 / 130 x 180 8 - 8,5 60 250 343 523
9 / 150 x 200 8 - 8,5 60 250 343 508 250 343 528
9 / 170 x 220 8 - 8,5 60 250 343 521
9 / 180 x 230 8 - 8,5 60 250 343 515
9 / 190 x 240 8 - 8,5 60 250 343 529
9 / 200 x 250 8 - 8,5 60 250 343 517
9 / 250 x 300 8 - 8,5 60 250 343 518
9 / 300 x 350 8 - 8,5 60 250 343 535
(#) In cellular concrete no drilling required. 8.5 mm drill for better ease of installation in concrete
Efectis re resistance lab report available on request
Design use: Fastening rigid insulation - Fastening exible insulaiton using 80 mm load spreading washers - All solid and hollow materials
(*) With prior testing
We recommend checking assembly resistance by performing tests on-site
Product denition:
- Impact anchor. Hammered in
- Head diameter 40 mm. (80 mm with additional load spreading washer)
- M0 re resistance classication. Fire resistant for three hours.
- Various lengths available, up to 300 mm insulation thickness
- Corrosion resistant in stainless steel version
Cross references :
Drill bit, concrete, see page 680 - Load spreading washer 80 mm, see page 279
Insert Expans-iso (code 343 540), see page 680
d0# : Support drilling diameter - h1# : Support drilling depth - L : Length - tx : Maximum fastenable thickness
IMPACT ANCHOR
SPREADER WASHER, 80 MM
FLEXIBLE INSULATION FASTENER
Aluminium zinc alloy Austenitic stainless steel
(AZ 150) A2 - 50
WASHER METAL-ISO WASHER METAL-ISO
AZ - 80 A2 SS - 80
Pack. Code Pack. Code
80 250 343 565 250 343 567
Design use: Used with METAL-ISO anchors for fastening exible insulation or at the intersection between
rigid panels.
Cross reference :
METAL-ISO anchors, see page 278
ISO-RG
d Pack. Code
60 6 100 358 129
Design use: Used directly with anchors or 6 mm max. screws for fastening rigid insulation.
Not UV resistant
Design use: Used directly with ISO-RG 60 Washer for fastening exible insulation.
Not UV resistant
d : Nominal diameter
Facade application:
- RAVALCO is used to hold ground mounted scaffolding against the faade (standing scaffolding).
Cross references :
Anchor (code 359 220) see page 280 - Drill bit, concrete, 14 mm, see page 680
Cap for hole (code 170 197), see page 282
Load: Up to 400 Kg
Grey polyamide
RAVALCO / P
x l d0 h1 Pack. Code
14 x 100 14 120 25 359 220
h1
23
Cross references :
Eyes, see page 280 - Drill bit, concrete, 14 mm, see page 680
Cap for hole (code 170 197), see page 282
d0 : Support drilling diameter - de : Eye diameter - h1 : Support drilling depth - L : Length
Load: Up to 847 Kg
Carbon steel class 5.8 zinc plated
5 m
RAVALCO / M
d x l de d0 h1 Pack. Code
M 10 x 220 50 16 130 10 359 215
M 10 x 270 50 16 180 10 359 217
100 mm
d d0
50
h1
Cross references :
PFL FM 744 anchor (code 344 475), see page 260 - Drill bit, concrete, 16 mm, see page 680
Cap for hole (code 170 197), see page 282
d : Nominal diameter - d0 : Support drilling diameter - de : Eye diameter - h1 : Support drilling depth - L : Length
Application:
- Used to ll the hole left after removing RAVALCO M or P or other anchors of 10 to 16 mm
Cross references :
RAVALCO / M, see page 281 - RAVALCO / P (code 359 220), see page 280
Application:
30
I - Scaffolding or lifting
- Used with FRAPCO female anchors or CHIMFORT chemical sockets
d
Cross references :
FRAPCO M12 (code 359 465), see page 253 - Socket CHIMFORT M12 (code 344 844), see page 265
d de da Pack. Code
54 M 12 30 54 20 170 192
Application:
- Scaffolding or lifting
30 - Used with male anchors like BARACO - MP3-N - CHIMFORT - FRP
d
Cross references :
BARACO M12, see page 254 - MP3-N M12 (code 359 528), see page 248
Threaded rods M12, see page 266
d : Nominal diameter - da : Ring outside diameter - de : Eye diameter - L : Length - Head : Head outside diameter
CHAPTER 5
For hook
288 & 289 288
Fully thread
290 290
000
Connecting rod
291
Nut
292 292
297
298 to 300 301 & 302 303 to 305 306 to 309 310
50
Hot dip galvanized steel wire Aluminium alloy Austenitic stainless steel
class B A2 Aisi 304
STRAIGHT ROD 8 STRAIGHT ROD 8 STRAIGHT ROD 8
HdG Alu SS A2
x L Pitch Bag of Code Pitch Bag of Code Pitch Bag of Code
8 x 150 150 500 38 150 125 500 32 150 125 500 35 150
8 x 200 150 300 38 200 125 500 32 200 125 300 35 200
8 x 250 150 300 38 250 125 500 32 250 125 300 35 250
8 x 300 150 300 38 300 125 500 32 300 125 200 35 300
8 x 350 150 200 38 350 125 500 32 350 125 200 35 350
8 x 400 150 100 38 400 125 500 32 400 125 100 35 400
8 x 450 150 100 38 450 125 500 32 450 125 100 35 450
Cross references :
Additional nut (13 mm hex. head) HdG 8.3 Pitch 150 (code 170 830), see page 292
Extra Hu nut (13 mm hex. head) Alu 8 Pitch 125 (code 68 850), see page 292
L : Length
Cross reference :
Extra nut (11 mm hex. head) HdG 7.2 Pitch 150 (code 170 720), see page 292
Cross reference :
Extra nut (10 mm hex. head) zink coated 6.3 Pitch 125 (code 170 630), see page 292
L : Length
Cross references :
GRIFCO / R, see page 520 - Connection sleeves for M6 / M8, see page 291
Nuts, hex. head / Zinc coated, see page 292 - Nuts, hex. head / SS A2, see page 292
2 meters
Cross references :
GRIFCO / R, see page 520 - Connection sleeves for M6, see page 291
Nuts, hex. head / Zinc coated, see page 292
CONNECTING ROD
CYLINDRICAL SLEEVE FOR CONNECTING RODS
Carbon steel
CYLINDRICAL
SLEEVE / Zn
Out M x L Pitch Ext. Pack. Code
6 x 20 100 8 100 170 905
Cross reference :
Threaded rods, 6 or 8, see page 290
Cross reference :
Threaded rods 6, see page 290
Cross references :
Straight rods 6 / HdG, see page 289 - Straight rods 7 / HdG, see page 289
Straight rods 8 / HdG, see page 288 - T.R.C.C. 7 / HdG, voir page 298
NUT Hu / Zn NUT Hu / SS A2
Cross references :
Threaded rods / Zn, see page 290 - Threaded rods / SS A2, see page 290
H : Hex. drive
Cross references :
VULCO saddles, see page 375 - Spacer blocks, see page 382 - Closers, see page 314
PPSO VULCO plate, see page 368 - Comb closers, see page 415
Deep corrugation spacer blocks, see page 382
Cross references :
Shallow corrugation panels, see page 372 - Narrow closers, see page 314
Shallow spacer blocks, see page 382 - VULCO saddles, see page 375 - Spacer blocks, see page 382
Closers, see page 314 - PPSO VULCO plate, see page 368 - Comb closers, see page 415
Deep corrugation spacer blocks, see page 382
FORME 9 / HdG
Rod Prole Corrugation height O Bag of * Code
7 Steel sheet 20 40 1000 780 000
7 Steel sheet 25 45 1000 780 001
7 Steel sheet 30 50 1000 780 002
7 Steel sheet 35 55 1000 780 003
7 Steel sheet 40 60 1000 780 004
7 Steel sheet 45 65 500 780 005
22,5
Cross references :
VULCO saddles, see page 375 - Spacer blocks, see page 382 - Closers, see page 314
PPSO VULCO plate, see page 368 - Comb closers, see page 415
Deep corrugation spacer blocks, see page 382
Roong application:
- Hook retaining clip for easy panel fastening
FORME 99 / HdG
Rod Prole Corrugation height O Bag of * Code
7 Steel sheet 40 60 1000 780 014
7 Steel sheet 45 65 1000 780 015
22,5
Cross references :
VULCO saddles, see page 375 - Spacer blocks, see page 382 - Closers, see page 314
PPSO VULCO plate, see page 368 - Comb closers, see page 415
Deep corrugation spacer blocks, see page 382
ARN / Galv.
Strip: 28 mm
Complying with DTU 40.35 and 40.36
Complying with DTU 40.37 (2011/09)
National Test Lab report 404.109 DMS
Roong application:
- Fastening steel or aluminium sheets or deep corrugation 177x51 bre-cement sheet roong through the
top corrugation to IPN/IPE/HEA type metal frames
Cross references :
TRCC bolts 7 mm, see page 298 - Crimping clamp (code 44 001), see page 297
AGRAFCO
Roong application:
- ARN staple crimping tool
Cross reference :
ARN staples, see page 297
Cross references :
ARN staples / HdG, see page 297
Additional nut (11 mm hex. head) HdG 7.2 Pitch 150 (code 170 720), see page 292
Additional nut (13 mm hex. head) HdG 7.3 Pitch 150 (code 170 732), see page 292
L : Length - Lf : Threaded length
Facade application:
- Fitting extensions to facade brackets
Cross references :
Fan type washers, see page 503 - ISOLCO brackets, see page 598 - SPIDO extensions, see page 600
U shaped reinforcements, see page 603
L : Length - Lf : Threaded length
SAFETY NUT
BREAK OFF HEAD / IRREMOVABLE
Austenitic stainless steel
A2 Aisi 304
EDS / SS A2
M d d1 H Pack. Code
d 8 8 10 15 50 358 983
df 10 10 12 17 50 358 984
TC NUT / SS A2
VDS / Zn
Cross references :
Stainless end holder with magnetic clips (code 323 105), see page 663
Torx 40 pattern screwdriver head (code 325 120), see page 663 - Power screwdrivers, see page 665
d : Nominal diameter - Pattern : Bit drive recess - H : Hex. drive - L : Length
SECURIT PATTERN / Za
Cross reference :
MP3 SECURIT anchor, see page 251
Cross reference :
Torx head drive bits, see page 663
Allen
Head
pattern
Cross references :
Hex. head hollow drive ends, see page 663 - Hex. head nuts / SS A2, see page 292
FRAPCO impact anchors, see page 253 - BRASS anchors, see page 242
COBOL anchors, see page 242 - PFL FM 744 anchors, see page 260
Cross references :
Hex. head hollow drive ends, see page 663 - Hex. head nuts / SS A2, see page 292
FRAPCO impact anchors, see page 253 - MP3 anchors / SS A2, see page 245
COBOL anchors, see page 242
L : Length - Head : Head outside diameter
Cross references :
Hex. head hollow drive ends, see page 663 - Hex. head nuts / SS A2, see page 292
FRAPCO impact anchors, see page 253 - BRASS anchors, see page 242
COBOL anchors, see page 242 - PFL FM 744 anchors, see page 260
Cross reference :
M8 Metal screws, Din 912 / SS A2, see page 305
8 x 35 22 13 100 69 516
8 x 40 22 13 100 69 518
8 x 45 22 13 100 69 520
8 x 50 22 13 100 69 522
8 x 60 22 13 100 69 524
8 x 70 22 13 50 69 347
8 x 80 22 13 50 69 351
10 x 40 26 17 100 69 525
10 x 45 26 17 100 69 526
10 x 50 26 17 100 69 527
10 x 60 26 17 50 69 528
10 x 70 26 17 50 69 529
10 x 80 26 17 50 69 530
12 x 40 30 19 50 69 540
12 x 45 30 19 50 69 541
12 x 50 30 19 50 69 542
12 x 60 30 19 50 69 543
12 x 70 30 19 50 69 390
12 x 80 30 19 50 69 386
Cross references :
Hex. head nuts / SS A2, see page 292 - FRAPCO impact anchors, see page 253
BRASS anchors, see page 242 - COBOL anchors, see page 242
PFL FM 744 anchors, see page 260
H : Hex. drive - L : Length - Lf : Threaded length
6 x 10 10 200 69 288
6 x 16 10 200 69 290
6 x 20 10 200 69 295
6 x 25 10 200 69 297
6 x 30 10 200 69 296
6 x 35 10 200 69 289
6 x 40 10 200 69 300
6 x 45 10 200 69 302
6 x 50 10 200 69 303 200 69 204
6 x 60 10 200 69 304
6 x 70 10 100 69 311
6 x 80 10 200 69 312
8 x 15 13 200 69 330
8 x 20 13 200 69 335
8 x 25 13 100 69 336
8 x 30 13 100 69 337
8 x 35 13 100 69 338
8 x 40 13 100 69 339
8 x 45 13 100 69 342
8 x 50 13 100 69 341
8 x 60 13 100 69 340 200 69 400
8 x 70 13 100 69 345 200 69 402
8 x 80 13 100 69 350
8 x 100 13 100 69 357
8 x 120 13 50 69 358
10 x 16 17 100 69 365
10 x 20 17 100 69 367
10 x 25 17 100 69 480
10 x 30 17 100 69 368
10 x 35 17 100 69 482
10 x 40 17 100 69 370
10 x 45 17 100 69 484
10 x 50 17 100 69 371
10 x 60 17 50 69 373
10 x 70 17 50 69 485 100 69 456
10 x 80 17 50 69 374
10 x 90 17 50 69 459
10 x 110 17 50 69 361
10 x 120 17 50 69 362
10 x 180 17 25 69 363
12 x 16 19 100 69 486
12 x 20 19 100 69 375
12 x 25 19 100 69 487
12 x 30 19 100 69 377 100 69 863
12 x 35 19 100 69 376
12 x 40 19 50 69 378
12 x 45 19 50 69 488
12 x 50 19 50 69 489
12 x 60 19 50 69 490
12 x 70 19 50 69 388
continued on next page
16 x 90 24 25 69 372
16 x 110 24 25 69 305
Cross references :
Hex. head nuts / SS A2, see page 292 - Hex. head nuts / Zn, see page 292
FRAPCO impact anchors, see page 253 - BRASS anchors, see page 242
COBOL anchors, see page 242 - PFL FM 744 anchors, see page 260
8 x 16 16 13 200 56 390
8 x 20 20 13 200 56 400
8 x 25 25 13 200 56 410
8 x 30 30 13 200 56 420
8 x 35 22 13 200 56 430
8 x 40 22 13 200 56 440
8 x 45 22 13 200 56 450
8 x 50 22 13 100 56 460
8 x 60 22 13 100 56 480
8 x 70 22 13 100 56 490
8 x 80 22 13 100 56 500
8 x 90 22 13 100 56 510
8 x 100 22 13 100 56 520
8 x 120 22 13 50 56 522
10 x 20 20 16 100 56 530
10 x 25 25 16 100 56 540
10 x 30 30 16 100 56 550
10 x 35 35 16 100 56 560
10 x 40 26 16 100 56 570
10 x 50 26 16 100 56 590
10 x 60 26 16 100 56 610
10 x 70 26 16 100 56 620
10 x 80 26 16 50 56 630
10 x 90 26 16 50 56 640
10 x 100 26 16 50 56 642
10 x 110 26 16 50 56 643
10 x 120 26 16 50 56 644
continued on next page
x L Lf H Box of Code
10 x 130 32 16 50 56 645
12 x 20 20 18 100 56 650
12 x 25 25 18 100 56 660
12 x 30 30 18 100 56 670
12 x 40 40 18 100 56 690
12 x 50 30 18 50 56 710
12 x 70 30 18 50 56 740
12 x 80 30 18 50 56 750
12 x 100 30 18 50 56 770
12 x 120 30 18 50 56 780
12 x 130 36 18 50 56 790
14 x 30 30 21 50 56 830
14 x 35 35 21 50 56 840
14 x 70 34 21 50 56 890
14 x 120 34 21 25 56 940
16 x 30 30 24 25 56 970
16 x 40 40 24 25 56 990
16 x 50 50 24 25 57 010
16 x 60 38 24 25 57 145
16 x 80 38 24 25 57 060
16 x 110 38 24 10 57 090
18 x 80 42 27 25 57 150
18 x 90 42 27 25 57 130
20 x 40 40 30 25 57 140
20 x 50 50 30 25 57 142
Standard NF EN 24014 (partial thread) - NF EN 24017 (full length thread) - NF EN 24032 (nut)
Other dimensions on request
7
pitch 150
9,5
Cross reference :
ELICO anchors, see page 212
L : Length
CHAPTER 6
Steel sheet & sandwich panel by alphabetical profiler order 318 to 349
ARCLAD ARVAL
318 & 319 320 & 321 322 & 323 324 & 325
326 & 327 328 & 329 330 & 331 332 & 333
334 & 335 336 & 337 338 & 339 340 & 341
342 & 343 344 & 345 346 & 347 348 & 349
Aluminium sheet & sandwich panel by alphabetical profiler order 350 to 355
364
SADDLE WASHER / S S
for sinusoidal corrugation 368 369 370 to 372
SADDLE WASHER / R R
for round ridge
368 369 370 to 372
SADDLE WASHER / T T
for trapezoidal corrugation
SADDLE WASHER / S S
for sinusoidal corrugation
374 373
384 & 385 386 387 & 388 389 to 391 392
399
401 402
402
000
pb
Thick
Ht
GB
Pitch
S R T
Sinusoidal corrugation Round ridge Trapezoidal corrugation
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoidal ridge prole
30.200.1000 5 200 30 1 000 25 60 JV 111 125 111 126 111 127
33.250.1000 4 250 33 1 000 22 63 EV 111 104 111 105 111 107
45.333.1000 3 333 45 1 000 23 75 HV 111 100 111 101 111 106
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
J 110 194 110 181 110 200 110 190 110 230 110 180 110 220
I 110 761 110 782 110 750 110 760 110 780 110 781 110 770 20 50 428 750 20 50 428 760
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 010 20 50 422 160 20 50 423 160
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoidal ridge prole
COUVRESCO 3.1000.39T 3 333 39 1 000 22 72 HV 111 100 111 101 111 106
COUVRESCO 3.1000.45TS 3 333 45 1 000 23 75 HV 111 100 111 101 111 106
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 400 20 50 428 730 20 50 428 740
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 010 20 50 422 160 20 50 423 160
112 612 112 573 112 600 112 610 112 572 112 620 450 280 20 50 422 110 20 25 423 110
I 110 761 110 782 110 750 110 760 110 780 110 781 110 770 20 50 428 750 20 50 428 760
112 524 112 513 112 520 112 522 112 510 112 512 450 810 15 25 422 020 CP = P
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 30 1 428 600* 20 50 428 740
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 30 1 428 600* 20 50 428 740
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapzodal ridge prole TRAPEZA RANGE
TRAPEZA 8.125.25 T 8 125 25 1 000 28 97 YV 111 156 111 157 111 158
ARCHI-TOP 37 5 193 37 965 23 63 HV 111 100 111 101 111 106
TRAPEZA 3.333.39 T 3 333 39 1 000 22 72 HV 111 100 111 101 111 106
CHANTILLY 5.40.900 T 5 180 40 900 49 105
ARCHI-TOP 42 3 333 42 1 000 30 61 MV 111 115 111 116 111 117
TRAPEZA 3.45.1000 TS 3 333 45 1 000 23 75 HV 111 100 111 101 111 106
TRAPEZA 3.333.79 T 3 333 79 333 34 146
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
P 112 159 113 404 112 150 112 160 113 400 113 403 450 240 20 50 422 295 CP = P
F 110 515 110 533 110 500 110 510 110 530 110 531 112 875
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 400 20 50 428 730 20 50 428 740
Z 111 367 111 361 111 365 111 366 111 360 111 361 450 400 20 50 428 110 20 50 428 111
M 111 612 111 632 111 600 111 610 111 630 111 631 111 620 20 25 422 591 20 25 422 592
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 010 20 50 422 160 20 50 423 160
V 110 315 110 340 110 300 110 310 110 330 110 331 30 50 428 770 30 50 428 780
112 612 112 573 112 600 112 610 - 112 572 112 620 450 280 20 50 422 110 20 25 423 110
I 110 761 110 782 110 750 110 760 110 780 110 781 110 770 450 390 20 50 428 750 20 50 428 760
110 777 110 773 110 776 110 775 110 779 20 25 429 183 20 25 429 182
111 491 112 513 112 520 112 522 112 510 112 512 450 810 15 25 422 020 CP = P
110 747 110 744 110 746 110 749 20 25 422 036 CP = P
110 326 110 325 110 324 20 50 422 230 20 50 422 240
110 747 110 744 110 745 110 746 110 749
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 30 1 428 600* 20 50 428 740
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 30 1 428 600* 20 50 428 740
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoidal ridge prole
COVEO 1030 8 128,7 25 1 030 29 99,7 YV 111 156 111 157 111 158
840.3.25 N 3 280 25 840 40 60
COVEO 4.35 4 250 35 1 000 22 63 EV 111 104 111 105 111 107
COVEO 3.35 3 333 35 1 000 21 66 EV 111 104 111 105 111 107
COVEO 4.37 4 250 37 1 000 20 55 CV 111 102 111 103 111 108
COVEO 3.39 3 333 39 1 000 23 75 HV 111 100 111 101 111 106
COVEO 4.40 4 250 40 1 000 20 65 CV 111 102 111 103 111 108
COVEO 3.45 3 333 45 1 000 21 75 HV 111 100 111 101 111 106
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
112 612 112 573 112 600 112 610 112 571 112 572 112 620 450 280 20 50 422 110 20 25 423 110
111 491 112 513 112 520 112 522 112 510 112 512 450 810 15 25 422 020 CP = P
110 747 110 744 110 746 110 749 20 25 422 036 CP = P
110 747 110 744 110 745 110 746 110 749
C 110 767 110 976 110 920 110 930 110 970 110 975 110 980 20 25 428 749
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoidal ridge prole
CISA 1000 / 40 C 4 250 40 1 000 20 66 CV 111 102 111 103 111 108
CISA 1000 / 45 C 3 333 45 1 000 23 75 HV 111 100 111 101 111 106
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
C 110 767 110 976 110 920 110 930 110 970 110 975 110 980 450 400 20 50 422 390 20 50 423 290
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 010 20 50 422 160 20 50 423 160
111 491 112 513 112 520 112 522 112 510 112 512 450 810 15 25 422 020 CP = P
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Insulating sandwich panel
FEBOROOF - DPN - 05 3 333 39 1 000 23 72 HV 111 100 111 101 111 106
FEBOROOF - DPN - 02 3 333 45 1 000 23 75 HV 111 100 111 101 111 106
ETANCO Sheeting#
Colour chart ISOBAR
Ref
Beige RAL 1015 014 C+V
Light grey RAL 7035 158 C+V
Gris clair RAL 7035 158 C+V
White RAL 9002 042 C+V
Blanc RAL 9002 042 C+V
White RAL 9010 001 C+V
Blanc RAL 9010 001 C+V
(Sheeting #) Pre-painted standard sheets
available:
C = Sheets for bare saddles washers
V = Sheets for Vulco saddles washers
Availability of pre-painted metal accessory
depends on whether we can obtain raw materials
If problems arise, we can offer you post-painted
aluminium saddles washers
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 30 1 428 600* 20 50 428 740
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 20 50 423 160
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Insulating sandwich panel
C3 2 520 39 1 040 39 73
ETANCO Sheeting#
Colour chart ISOCAB
Ref
Beige 1015 RAL 1015 014 C+V
Brick 3009 RAL 3009 087 C
Slate 5008 RAL 5008 008 C+V
Blue 5010 RAL 5010 075
Green 6011 RAL 6011 040 C+V
Grey 7005 RAL 7005 102 V
Grey 7038 RAL 7022 020 C+V
Grey 7038 RAL 7038 157
Brown 8016 RAL 8016 323
Grey 9002 RAL 9002 042 C+V
Metallic grey 9006 RAL 9006 010 C+V
White 9010 RAL 9010 001 C+V
(Sheeting #) Pre-painted standard sheets
available:
C = Sheets for bare saddles washers
V = Sheets for Vulco saddles washers
Availability of pre-painted metal accessory
depends on whether we can obtain raw materials
If problems arise, we can offer you post-painted
aluminium saddles washers
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
V 110 315 110 340 110 300 110 310 110 330 110 331 20 25 422 877
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Insulating sandwich panel
ISOCOP 5.1000 5 250 40 1 000 25 55 HV 111 100 111 101 111 106
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 20 25 422 045
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoidal ridge prole
PML 25.125.1000 CS 8 125 25 1 000 28 97 YV 111 156 111 157 111 158
PML 33.250.1000 CS 4 250 33 1 000 22 63 EV 111 104 111 105 111 107
PML 35.333.1000 CS 3 333 35 1 000 23 70 HV 111 100 111 101 111 106
PML 37.250.1000 CS 4 250 37 1 000 24 80 LV 111 130 111 131 111 132
PML 37.500.1000 CS 2 500 37 1 000 24 80 LV 111 130 111 131 111 132
PML 40.183.915 CS 5 183 40 915 40 64
JURA CS 5 190 40 950 50 105
PML 40.250.1000 CS 4 250 40 1 000 20 65 CV 111 102 111 103 111 108
PML 45.333.1000 CS 3 333 45 1 000 23 75 HV 111 100 111 101 111 106
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
P 112 159 113 404 112 150 112 160 113 400 113 403 450 240 20 50 422 295 CP = P
I 110 761 110 782 110 750 110 760 110 780 110 781 110 770 N 20 50 428 808 20 50 428 809
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 390 20 50 428 458 20 50 428 459
G 110 764 112 878 112 870 112 872 112 871 112 873
G 110 764 112 878 112 870 112 872 112 871 112 873
V 110 315 110 340 110 300 110 310 110 330 110 331 450 400 20 50 422 220 20 50 423 220
Z 111 367 111 362 111 365 111 366 111 360 111 361 450 400 20 25 422 143 20 25 422 142
C 110 767 110 976 110 920 110 930 110 970 110 975 110 980 450 400 20 50 422 390 20 50 423 290
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 010 20 50 422 160 20 50 423 160
112 612 112 573 112 600 112 610 112 571 112 572 112 620 450 280 20 50 422 110 20 25 423 110
111 491 112 513 112 520 112 522 112 510 112 512 450 810 15 25 422 020 CP = P
110 747 110 744 110 746 110 749 20 25 422 036 CP = P
110 747 110 744 110 745 110 746 110 749
I 110 761 110 782 110 750 110 760 110 780 110 781 110 770
G 110 764 112 878 112 870 112 872 112 871 112 873
G 110 764 112 878 112 870 112 872 112 871 112 873
G 110 764 112 878 112 870 112 872 112 871 112 873
G 110 764 112 878 112 870 112 872 112 871 112 873
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 20 50 423 160
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Insulating sandwich panel
KS 1000 RW 3 333 35 1 000 30 63 MV 111 115 111 116 111 117
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
M 111 612 111 632 111 600 111 610 111 630 111 631 111 620
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Insulating sandwich panel
EUROCOPRE 3 333 38 1 000 20 58 CV 111 102 111 103 111 108
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
C 110 767 110 976 110 920 110 930 110 970 110 975 110 980 20 50 428 459
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Insulating sandwich panel
METECNO ROOF G5 4 250 35 1 000 20 55 CV 111 102 111 103 111 108
TOPROOF G4 3 333 35 1 000 20 55 CV 111 102 111 103 111 108
TOPROOF G3 2 500 35 1 000 20 55 CV 111 102 111 103 111 108
METECNO ROOF 3 333 38 1 000 20 40
HIPERTEC ROOF 3 333 38 1 000 20 40
ETANCO Sheeting#
Colour chart METECNO
Ref
Avorio Chiaro RAL 1015 014 C+V
Giallo Ginestra RAL 1032 141
Rosso Segnale RAL 3001 506
Rosso Mattone RAL 3009 087 C
Blu Genziana RAL 5010 075
Blu Chiaro RAL 5012 206 V
Verde Muschio RAL 6005 031 C+V
Verde Pallido RAL 6021 055 C+V
Verde Menta RAL 6029 166 C
Grigio Luce RAL 7035 158 C+V
Grigio Polvere RAL 7037 321 C
Marrone Seppia RAL 8014 068 C+V
Bianco Grigio RAL 9002 042 C+V
Bianco Alluminio RAL 9006 010 C+V
Bianco Puro RAL 9010 001 C+V
(Sheeting #) Pre-painted standard sheets
available:
C = Sheets for bare saddles washers
V = Sheets for Vulco saddles washers
Availability of pre-painted metal accessory
depends on whether we can obtain raw materials
If problems arise, we can offer you post-painted
aluminium saddles washers
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
C 110 767 110 976 110 920 110 930 110 970 110 975 110 980
C 110 767 110 976 110 920 110 930 110 970 110 975 110 980
C 110 767 110 976 110 920 110 930 110 970 110 975 110 980
B 110 394 110 393 110 395 20 50 422 095
B 110 394 110 393 110 395 20 50 422 095
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoidal ridge prole
COBACIER 1105 5 220 25 1 100 24 70
COBACIER 1008 8 125 27 1 000 28 97 YV 111 156 111 157 111 158
COBACIER 1004 4 250 40 1 000 20 65 CV 111 102 111 103 111 108
COBACIER 1003 3 333 45 1 000 23 75 HV 111 100 111 101 111 106
COBACIER 1000.45 3 333 45 1 000 30 65 MV 111 115 111 116 111 117
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
L 112 811 112 800 112 810 112 830 112 831 20 25 422 395 20 50 423 297
P 112 159 113 404 112 150 112 160 113 400 113 403 450 240 20 50 422 295 CP = P
C 110 767 110 976 110 920 110 930 110 970 110 975 110 980 450 400 20 50 422 390 20 50 423 290
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 010 20 50 422 160 20 50 423 160
M 111 612 111 632 111 600 111 610 111 630 111 631 111 620 450 020 20 50 422 270 20 50 423 270
112 612 112 573 112 600 112 610 112 571 112 572 450 280 20 50 422 110 20 25 423 110
111 491 112 513 112 520 112 522 112 510 112 512 450 810 15 25 422 020 CP = P
113 112 113 101 113 110 113 111 20 25 423 180 CP = P
C 110 767 110 976 110 920 110 930 110 970 110 975 110 980 30 1 428 712* 20 50 423 290
C 110 767 110 976 110 920 110 930 110 970 110 975 110 980 30 1 428 712* 20 50 423 290
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoidal ridge prole
COVERBAC 3.25.840 3 280 25 840 40 60
COVERBAC 3.45.1000 TS 3 333 45 1 000 23 75 HV 111 100 111 101 111 106
COVERBAC 3.45.1000 3 333 45 1 000 30 65 MV 111 115 111 116 111 117
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
V 110 315 110 340 110 300 110 310 110 330 110 331 450 250 15 50 422 100 15 50 423 100
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 010 20 50 422 160 20 50 423 160
M 111 612 111 632 111 600 111 610 111 630 111 631 111 620 450 020 20 50 422 270 20 50 423 270
111 491 112 513 112 520 112 522 112 510 112 512 450 810 15 25 422 020 CP = P
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoidal ridge prole
NERTOIT 3.35.1000 T 3 333 35 1 000 23 70 HV 111 100 111 101 111 106
NERTOIT 5.40.915 T 5 183 40 915 40 64
NERTOIT 4.40.1000 T 4 250 40 1 000 20 65 CV 111 102 111 103 111 108
NERTOIT 3.45.1000 T 3 333 45 1 000 23 75 HV 111 100 111 101 111 106
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 390 20 50 428 458 20 50 428 459
V 110 315 110 340 110 300 110 310 110 330 110 331 450 400 20 50 422 220 20 50 423 220
C 110 767 110 976 110 920 110 930 110 970 110 975 110 980 450 400 20 50 422 390 20 50 423 290
H 110 765 111 332 111 300 111 310 111 330 111 331 111 320 450 010 20 50 422 160 20 50 423 160
111 491 112 513 112 520 112 522 112 510 112 512 450 810 15 25 422 020 CP = P
110 747 110 744 110 745 110 746 110 749
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoidal ridge prole
TC 32 / 250 / 4 4 250 32 1 000 36 80 SV 111 190 111 191 111 192
TC 40 / 250 / 4 4 250 40 1 000 25 60 HV 111 100 111 101 111 106
ETANCO Sheeting#
Colour chart TOLFER
Ref
Sand RAL 1015 014 C+V
Red RAL 3000 023 C
Slate blue RAL 5008 008 C+V
Pine green RAL 6005 031 C+V
Mint green RAL 6011 040 C+V
Slate grey RAL 7015 221 C+V
Graphite grey RAL 7022 020 C+V
Red brown RAL 8012 054 C+V
Brown RAL 8014 068 C+V
Stone grey RAL 9002 042 C+V
Black RAL 9005 070 C+V
Aluminium grey RAL 9006 010 C+V
(Sheeting #) Pre-painted standard sheets
available:
C = Sheets for bare saddles washers
V = Sheets for Vulco saddles washers
Availability of pre-painted metal accessory
depends on whether we can obtain raw materials
If problems arise, we can offer you post-painted
aluminium saddles washers
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
pb
Ht
GB
Pitch
Pre-painted Post-painted
Aluminium
Aluminium Aluminium
1 mm
1 mm 1 mm
thickness
thickness thickness
EPDM seal
EPDM seal EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoid ridge prole
ALUFORM 29 / 124 8 124 29 992 20 61
ALUFORM 42 / 250 4 250 42 1000 30 80
ALUFORM 45 / 150 6 150 45 900 25 70 EV 111 104 111 105 111 107
P CP
Post-painted
Aluminium Pre-painted Post-painted
Aluminium Aluminium
1 mm Aluminium Aluminium
1 mm 1 mm Plastic Polyethylene foam Polyethylene foam
thickness + 1 mm 1 mm
thickness + thickness
EPDM washer thickness thickness
EPDM washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Al Al / PsL SPACER
Al Al / PrL Al / PsL Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code
type mm (m) mm (m)
D 113 022 113 020 113 060 113 021 20 25 428 400 20 25 428 410
R 112 139 112 123 112 135 113 075 112 121 20 25 428 871 20 25 428 872
E 113 005 113 002 113 012 113 001 450 020 20 50 428 440 20 50 428 450
112 513 112 510 112 522 112 512 450 810 15 25 422 020 CP = P
113 090 113 092 20 25 429 030 CP = P
113 112 113 110 113 111 20 25 428 397 20 25 428 398
R 112 139 112 123 112 135 113 075 112 121 20 25 428 872
H 111 333 111 332 111 330 111 335 111 331 20 50 428 450
pb
Ht
GB
Pitch
Pre-painted Post-painted
Aluminium
Aluminium Aluminium
1 mm
1 mm 1 mm
thickness
thickness thickness
EPDM seal
EPDM seal EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoid ridge prole
BEMO 20-75 12 75 20 900 23 52 JV 111 125 111 126 111 127
BEMO 35-207 5 207 35 1035 40 88 UV 111 147 111 148 111 149
BEMO 45-150 6 150 45 900 25 70 EV 111 104 111 105 111 107
BEMO 45-333 S 3 333 45 1000 23 72 HV 111 100 111 101 111 106
P CP
Post-painted
Aluminium Pre-painted Post-painted
Aluminium Aluminium
1 mm Aluminium Aluminium
1 mm 1 mm Plastic Polyethylene foam Polyethylene foam
thickness + 1 mm 1 mm
thickness + thickness
EPDM washer thickness thickness
EPDM washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Al Al / PsL SPACER
Al Al / PrL Al / PsL Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code
type mm (m) mm (m)
O 112 094 112 093 112 090 112 070 112 091
U 112 933 112 932 112 930 112 931 450 390 20 25 428 489
E 113 005 113 002 113 012 113 001 20 50 428 440 20 50 428 450
H 111 333 111 332 111 330 111 335 111 331 450 010 20 50 422 160 20 50 423 160
112 513 112 510 112 522 112 512 450 810 15 25 422 020 CP = P
112 513 112 510 112 522 112 512 20 25 422 286 CP = P
113 112 113 110 113 111 20 25 423 180 CP = P
113 112 113 110 113 111 20 25 428 397 20 25 428 398
pb
Ht
GB
Pitch
Pre-painted Post-painted
Aluminium
Aluminium Aluminium
1 mm
1 mm 1 mm
thickness
thickness thickness
EPDM seal
EPDM seal EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoid ridge prole
KALZIP TR 24/100 10 100 24 1000 29 74
KALZIP TR 30/167 6 167 28 1000 35 72 SV 111 190 111 191 111 192
KALZIP TR 29/124 8 124 29 992 20 61
KALZIP TR 35/200 C 5 200 35 1000 35 90
KALZIP TR 40/185 5 185 40 925 35 75
KALZIP TR 45/150 6 150 45 900 25 70 JV 111 125 111 126 111 127
KALZIP TR 50/167 5 167 50 833 35 69
ETANCO Sheeting#
Colour chart KALZIP
Ref
Beige brown RAL 1011 066
Ivory RAL 1015 014 C+V
Slate blue RAL 5008 008 C+V
Pigeon blue RAL 5014 103 C+V
Olive green RAL 6003 101 C
Pale green RAL 6021 055 C+V
Anthracite grey RAL 7016 236 V
Platinum grey RAL 7036 195
Reddish-brown RAL 8012 054 C+V
Sepia brown RAL 8014 068 C+V
Creamy white RAL 9001 235 C
Stone grey RAL 9002 042 C+V
Aluminium white RAL 9006 010 C+V
Aluminium grey RAL 9007 276 V
White RAL 9010 001 C+V
(Sheeting #) Pre-painted standard sheets
available:
C = Sheets for bare saddles washers
V = Sheets for Vulco saddles washers
Availability of pre-painted metal accessory
depends on whether we can obtain raw materials
If problems arise, we can offer you post-painted
aluminium saddles washers
P CP
Post-painted
Aluminium Pre-painted Post-painted
Aluminium Aluminium
1 mm Aluminium Aluminium
1 mm 1 mm Plastic Polyethylene foam Polyethylene foam
thickness + 1 mm 1 mm
thickness + thickness
EPDM washer thickness thickness
EPDM washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Al Al / PsL SPACER
Al Al / PrL Al / PsL Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code
type mm (m) mm (m)
K 112 733 112 730 112 690 112 731 450 240 15 25 422 290 CP = P
S 112 130 112 131 112 127 20 25 422 302 20 25 429 860
D 113 022 113 020 113 060 113 021 20 25 428 400 20 25 428 410
P 113 402 113 404 113 400 113 401 113 403 20 25 422 305 20 25 423 305
R 112 139 112 123 112 135 113 075 112 121 450 400 20 25 423 155 20 25 423 156
E 113 005 113 002 113 012 113 001 450 020 20 50 428 440 20 50 428 450
Q 112 143 112 140 112 141 112 142 20 25 422 310 20 25 423 310
112 513 112 510 112 522 112 512 450 810 15 25 422 020 CP = P
EDILFIBRO
Lu
Ht
Pitch
(*) Fastening systems compliant with DTU 40.37 (09/2011) and CSTB Booklet 3297
ETANCO Sheeting#
Colour chart EDILFIBRO
Ref
Brown 1500
Black 1300
Ochre
Brick red 1600
Green 6003
(Sheeting #) Pre-painted standard sheets
available:
C = Sheets for bare saddles washers
V = Sheets for Vulco saddles washers
Availability of pre-painted metal accessory
depends on whether we can obtain raw materials
If problems arise, we can offer you post-painted
aluminium saddles washers
EDILFIBRO
Pre-painted
Galvanized Post-painted Stainless
galvanized Aluminium
steel Aluminium Steel
steel 1 mm Plastic Polyethylene foam Polyethylene foam
0.8 mm 1 mm A2 - 0.8 mm
0.8 mm thickness
thickness thickness thickness
thickness
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
010 70 010 70 310 70 110 70 111 70 230 450 510 20 50 422 000 CP = P
ETERNIT
Lu
Ht
Pitch
(*) Fastening systems compliant with DTU 40.37 (09/2011) and CSTB Booklet 3297
ETANCO Sheeting#
Colour chart ETERNIT
Ref
Savanna brown 127 C
Horizon grey 007 C
Shadow grey 064 C+V
Graphite black 221 C+V
Southern ochre 129
Red brown 241
Laterite red 053
Forest green 101 C
Moss green 164
(Sheeting #) Pre-painted standard sheets
available:
C = Sheets for bare saddles washers
V = Sheets for Vulco saddles washers
Availability of pre-painted metal accessory
depends on whether we can obtain raw materials
If problems arise, we can offer you post-painted
aluminium saddles washers
ETERNIT
Pre-painted
Galvanized Post-painted Stainless
galvanized Aluminium
steel Aluminium Steel
steel 1 mm Plastic Polyethylene foam Polyethylene foam
0.8 mm 1 mm A2 - 0.8 mm
0.8 mm thickness
thickness thickness thickness
thickness
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
010 70 010 70 310 70 110 70 111 70 230 450 510 20 50 422 000 CP = P
010 70 010 70 310 70 110 70 111 70 230 450 510 20 50 422 000 CP = P
010 70 010 70 310 70 110 70 111 70 230 450 510 20 50 422 000 CP = P
Lu
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoid ridge prole
GRECA 70x18 16 70 18 980 25 45 JV 111 125 111 126 111 127
ETANCO Sheeting#
Colour chart ONDEX
Ref
6001 RAL 6001 267
6029 RAL 6029 166 C
7035 RAL 7035 158 C+V
7047 RAL 7047 480
7004 RAL 9006 010 C+V
(Sheeting #) Pre-painted standard sheets
available:
C = Sheets for bare saddles washers
V = Sheets for Vulco saddles washers
Availability of pre-painted metal accessory
depends on whether we can obtain raw materials
If problems arise, we can offer you post-painted
aluminium saddles washers
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
J 110 194 110 181 110 200 110 190 110 230 110 180 110 220 450 150 15 25 422 030 CP = P
111 491 112 513 112 520 112 522 112 510 112 512 450 810 15 25 422 020 CP = P
111 491 112 513 112 520 112 522 112 510 112 512 450 810 15 25 422 020 CP = P
111 491 112 513 112 520 112 522 112 510 112 512 450 810 15 25 422 020 CP = P
pb
Ht
GB
Pitch
Post-
Pre-painted
Aluminium painted
Aluminium
1 mm Aluminium
1 mm
thickness 1 mm
thickness
EPDM seal thickness
EPDM seal
EPDM seal
For
fasteners 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
VULCO VULCO VULCO
Saddle W. Saddle W. Saddle W.
Al Al / PrL Al / PsL
Vulco
Name Corrugations Pitch Ht Lu pb GB Code Code Code
type
Dry roof trapezoid ridge prole
STRACIEL GRECA 1100 PC 13 75 18 975 25 50 LV 111 130 111 131 111 132
STRACIEL PO CARRE 888 PVC 11 76 18 836 25 50 LV 111 130 111 131 111 132
ONDUPAC 35 4 250 35 1000 22 63
P CP
Pre-painted Post-
galvanized painted Pre-painted Post-
Galvanized Stainless
steel Aluminium galvanized Aluminium painted
steel Steel
0.8 mm 1 mm steel 1 mm Aluminium Plastic Polyethylene foam Polyethylene foam
0.8 mm A2 - 0.8 mm
thickness + thickness + 0.8 mm thickness 1 mm
thickness thickness
EPDM EPDM thickness thickness
washer washer
For
fasteners 6 to 6.5 mm 6 to 6.5 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm 5.5 to 8 mm
Saddle W. Saddle W.
Saddle W. Saddle W. Saddle W. Saddle W. Saddle W. CLOSER CLOSER
Ga / PrL Al / PsL SPACER
Ga Ga / PrL Al Al / PsL SS A2 Prole = P Counter-prole = CP
+ CSW + CSW
SW Thick Pack. Thick Pack.
Code Code Code Code Code Code Code Code Code Code
type mm (m) mm (m)
G 110 764 112 878 112 870 112 872 112 871 112 873 450 150
G 110 764 112 878 112 870 112 872 112 871 112 873 450 150
U 112 911 112 932 112 900 112 910 112 930 112 931 112 920 450 390 20 50 428 750 20 50 428 760
Colour matches
RAL ETANCO Plastic RAL ETANCO Plastic RAL ETANCO Plastic
Ref. Ref.
Sheeting# molding Ref. Ref.
Sheeting# molding Ref. Ref.
Sheeting# molding
RAL 1000 105 x RAL 5005 507 x RAL 7015 221 C+V x
RAL 1001 204 x RAL 5007 122 x RAL 7016 236 V x
RAL 1002 060 C x RAL 5008 008 C+V x RAL 7021 343 x
RAL 1003 193 x RAL 5009 061 C+V x RAL 7022 020 C+V x
RAL 1005 375 x RAL 5010 075 x RAL 7023 322 x
RAL 1006 274 RAL 5011 337 x RAL 7024 233 x
RAL 1007 753 RAL 5012 206 V x RAL 7026 448 x
RAL 1011 066 x RAL 5013 280 x RAL 7030 007 C x
RAL 1012 260 x RAL 5014 103 C+V x RAL 7031 085 x
RAL 1013 187 x RAL 5015 037 x RAL 7032 038 C+V x
RAL 1014 106 C x RAL 5017 183 x RAL 7033 234 x
RAL 1015 014 C+V x RAL 5018 021 x RAL 7034 289 x
RAL 1016 186 x RAL 5019 137 x RAL 7035 158 C+V x
RAL 1017 072 x RAL 5020 430 x RAL 7036 195 x
RAL 1018 063 x RAL 5021 353 x RAL 7037 321 C x
RAL 1019 027 C x RAL 5022 225 x RAL 7038 157 x
RAL 1020 124 x RAL 5023 449 x RAL 7039 165 x
RAL 1021 423 x RAL 5024 240 x RAL 7040 361 x
RAL 1023 149 C x RAL 6000 258 x RAL 7042 275 C x
RAL 1024 671 RAL 6001 267 x RAL 7043 447 x
RAL 1027 015 x RAL 6002 120 x RAL 7044 443 x
RAL 1028 090 x RAL 6003 101 C x RAL 7046 569 x
RAL 1032 141 x RAL 6004 245 x RAL 7047 480
RAL 1034 243 x RAL 6005 031 C+V x RAL 7048 638
RAL 2000 650 x RAL 6007 140 V x RAL 8000 057 C x
RAL 2001 024 x RAL 6008 269 RAL 8001 844
RAL 2002 115 x RAL 6009 082 x RAL 8002 259 x
RAL 2004 257 x RAL 6010 284 RAL 8003 500 x
RAL 2008 065 x RAL 6011 040 C+V x RAL 8004 208 x
RAL 2011 291 RAL 6012 552 RAL 8007 816
RAL 2012 538 RAL 6013 150 x RAL 8008 069 x
RAL 3000 023 C x RAL 6014 073 C x RAL 8011 074 C x
RAL 3001 506 RAL 6015 255 x RAL 8012 054 C+V x
RAL 3002 807 x RAL 6016 398 x RAL 8014 068 C+V x
RAL 3003 019 x RAL 6017 265 x RAL 8015 241 x
RAL 3004 178 x RAL 6018 125 C x RAL 8016 323 x
RAL 3005 117 x RAL 6019 013 C x RAL 8017 056 x
RAL 3007 299 x RAL 6020 281 C x RAL 8019 156 V x
RAL 3009 087 C x RAL 6021 055 C+V x RAL 8023 104 x
RAL 3011 312 x RAL 6022 697 RAL 8024 051 C+V x
RAL 3012 129 x RAL 6024 116 x RAL 8025 032 C x
RAL 3013 351 x RAL 6025 823 RAL 8029 729
RAL 3014 244 x RAL 6026 123 x RAL 9001 235 C x
RAL 3015 146 x RAL 6027 045 x RAL 9002 042 C+V x
RAL 3016 279 x RAL 6028 131 x RAL 9003 339 x
RAL 3017 379 RAL 6029 166 C x RAL 9005 070 C+V x
RAL 3018 382 x RAL 6032 508 RAL 9006 010 C+V x
RAL 3020 232 C x RAL 6033 338 x RAL 9007 276 V x
RAL 3022 242 V x RAL 6034 442 x RAL 9010 001 C+V x
RAL 3031 326 x RAL 7000 136 x RAL 9016 262 x
RAL 4001 377 x RAL 7001 198 x RAL 9017 554
RAL 4004 362 x RAL 7002 078 x RAL 9018 121 x
RAL 4005 441 RAL 7003 444
RAL 4006 595 x RAL 7004 400 x
RAL 4007 704 x RAL 7005 102 V x
RAL 4009 495 RAL 7006 064 C+V x
RAL 4010 712 RAL 7008 264 x
RAL 5000 497 RAL 7009 352
RAL 5001 420 x RAL 7010 700
RAL 5002 133 V x RAL 7011 378
RAL 5003 012 x RAL 7012 196 V x
(Sheeting #) Pre-painted standard sheets available: C = Sheets for bare saddles / V = Sheets for Vulco saddles
Availability of pre-painted metal accessory depends on whether we can obtain the raw materials
If problems arise, we can offer you post-painted aluminium saddles
ROUND RIB
3.283.29 40 x 30 5,5 8 100 111 120 100 111 121 100 111 122
Cross references :
Spacer blocks, see page 382 - Closers, see page 314
ROUND RIB
3.283.29 30 x 28 6,5 100 112 602 100 112 612
AUTHENTIQUE 2.500.58 T 48 x 40 6,5 100 110 777 100 110 773
Cross references :
Spacer blocks, see page 382 - Closers, see page 314
ROUND RIB
3.283.29 30 x 28 8,5 100 112 620
R Roong application:
- Fastening sinusoidal corrugations through the top corrugation. See our Roong Booklet for further
information.
Cross references :
Sealing washers, see page 409 - Spacer blocks, see page 382 - Closers, see page 314
ROUND RIB
3.283.29 30 x 28 8,5 100 112 571 100 112 572
AUTHENTIQUE 2.500.58 T 48 x 40 8,5 100 110 775 100 110 779
3.270.60 / SHED LIGHT / BALITHE 70 x 45 8,5 100 111 430 100 111 431
3.300.60 / NERVUPLA 56 x 53 8,5 100 111 530 100 111 531
Cross references :
Sealing washers, see page 409 - Spacer blocks, see page 382 - Closers, see page 314
ROUND RIB
3.283.29 30 x 28 8,5 100 112 600 100 112 610
AUTHENTIQUE 2.500.58 T 48 x 40 8,5 100 110 776
Cross references :
Sealing washers, see page 409 - Spacer blocks, see page 382 - Closers, see page 314
Cladding application:
- Fastening sinusoidal corrugations through the corrugation hollow.
S
Cross references :
Spacer blocks, see page 382 - Closers, see page 314
Roong application:
- Fastening a GRECA corrugation prole through the top corrugation. Refer to our Roong booklet for
further information.
Cross references :
Spacer blocks, see page 382 - Closers (code 422 030), see page 414
For attachments
Cross references :
Spacer blocks, see page 382 - Closers, see page 314
C.S.W. hole
T
Pre-painted galvanized steel Post-painted Aluminium
0.8 mm thickness 1 mm thickness
+ EPDM washer + EPDM washer
SADDLE WASHER - T SADDLE WASHER - T
Ga/PrL + CSW Al/PsL + CSW
pb GB Ht Angle CSW hole Type Pack. Code Pack. Code
18 25 10 10 6,5 B 100 110 394
19 35 15 30 6,5 A 100 111 032
20 39 20 23 6,5 C 100 110 767 100 110 976
20 43 19 31 6,5 D 100 113 022
21 40 19 20 6,5 F 100 110 515 100 110 533
22 43 18 25 6,5 E 100 113 005
23 50 15 42 6,5 G 100 110 764 100 112 878
24 43 18 30 6,5 H 100 110 765 100 111 332
24 45 18 28 8,5 I 100 110 761 100 110 782
25 45 16 28 6,5 J 100 110 194 100 110 181
27 42 16 20 6,5 M 100 111 612 100 111 632
28 55 17 34 6,5 L 100 112 811
28 57 17 37 6,5 N 100 110 453 100 110 459
29 59 15 44 6,5 K 100 111 383
30 49 18 25 6,5 O 100 112 111 100 112 093
34 47 14 22 6,5 R 100 112 123
34 50 18 18 6,5 Q 100 112 145
34 58 15 34 6,5 S 100 112 128
34 60 14 43 6,5 P 100 112 159 100 113 404
38 53 11 30 6,5 U 100 112 911 100 112 932
40 53 15 14 6,5 V 100 110 315 100 110 340
50 64 9 37 6,5 Z 100 111 367 100 111 362
Cross references :
Spacer blocks, see page 382 - Closers, see page 314
Ht : Height
T
Cross references :
Sealing washers, see page 409 - Spacer blocks, see page 382 - Closers, see page 314
Hole
Cross references :
Sealing washers, see page 409 - Spacer blocks, see page 382 - Closers, see page 314
Hole
Cross references :
Sealing washers, see page 409 - Spacer blocks, see page 382
Cross references :
Spacer blocks, see page 382 - Closers, see page 314
Cross references :
Spacer blocks, see page 382 - Closers, see page 314
Cross references :
Sealing washers, see page 409 - Spacer blocks, see page 382 - Closers, see page 314
Cross references :
Sealing washers, see page 409 - Spacer blocks, see page 382 - Closers, see page 314
Roong application:
- Used to reinforce the fastening of translucent roong proles and panels, sheets or plates around the edges of the building
Cross reference :
Closers, see page 314
Roong application:
- Used to reinforce the fastening of translucent roong proles and panels, sheets or plates around the
edges of the building
Cross reference :
Closers, see page 314
Ht : Height
Ht Bag Code
10 100 451 100
13 100 451 130
15 100 451 150
20 100 451 200
22 100 451 220
25 100 451 250
30 100 451 300
35 100 451 350
38 100 451 380
40 100 451 400
46 100 451 460
50 100 451 500
Roong application:
- Used to reinforce the fastening of translucent roong proles and panels, sheets or plates around the
edges of the building
Ht : Height
Min. pipe
Max. pipe
Cross references :
Mastic LR SIL 402 (code 492 100), see page 452 - ZACROVIS HEX8 6.3x22 (code 301 070), see page 91
PANEL FASTENING Kit, see page 390 - BULB-TITE 5.2x25.4 rivet (code 279 140), see page 190
FIBRO FASTENER Kit, see page 391
PIPECO Steel Packs (EPDM sleeve + fasteners + mastic), see page 392
Ht : Height - LB : Alu strip width - LE : Baseplate width
Min. pipe
Max. pipe
Cross references :
Mastic LR SIL 402 (code 492 100), see page 452 - ZACROVIS HEX8 6.3x22 (code 301 070), see page 91
PANEL FASTENING Kit, see page 390 - BULB-TITE 5.2x25.4 rivet (code 279 140), see page 190
FIBRO FASTENER Kit, see page 391
Ht : Height - LB : Alu strip width - LE : Baseplate width
Universal solution for new build or renovation applications. PIPECO - PIPECLAIR is delivered ready-welded, the transverse closure is ready-split, allowing
this dual application approach.
EPDM quality: Resistant to temperatures of -50 to +100C and +135C intermittantly
Ultra-Violet light resistant
Ozone resistance tested for 70 hours on masts, poles etc.
Twenty year anti-corrosion guarantee
Compliant with DTU 40.35
PIPECLAIR ts all proles (deep corrugation, bre-cement, ribbed or at panels, etc.)
Fastens to steel or sandwich panels using the steel panel B kit (code 188 355): ZACROVIS self-drilling screws + Endless stainless steel strip + Mastic
Fastens to bre-cement or aluminium panels using the bre-cement F kit (code 188 365): BULB-TITE rivets + Endless stainless steel strip + Mastic
Roong & Cladding application:
- Used to seal around all round exhaust vents in renovation or new build applications. Its transverse closure system lets you use Pipeclair around an
outlet that cannot be accessed from above.
Cross references :
Mastic LR SIL 402 (code 492 100), see page 452 - ZACROVIS HEX8 6.3x22 (code 301 070), see page 91
PANEL FASTENING Kit, see page 390 - BULB-TITE 5.2x25.4 rivet (code 279 140), see page 190
FIBRO FASTENER Kit, see page 391
Ht : Height - LB : Alu strip width - LE : Baseplate width
Min. pipe
Max. pipe
Cross references :
Mastic LR SIL 402 (code 492 100), see page 452 - ZACROVIS HEX8 6.3x22 (code 301 070), see page 91
PANEL FASTENING Kit, see page 390 - BULB-TITE 5.2x25.4 rivet (code 279 140), see page 190
FIBRO FASTENER Kit, see page 391
Ht : Height - LB : Alu strip width
Min. pipe
Max. pipe
Cross references :
Mastic LR SIL 402 (code 492 100), see page 452 - ZACROVIS HEX8 6.3x22 (code 301 070), see page 91
PANEL FASTENING Kit, see page 390 - BULB-TITE 5.2x25.4 rivet (code 279 140), see page 190
FIBRO FASTENER Kit, see page 391
Cross references :
Stainless steel endless band, see page 389 - PIPECLAIR sleeves, see page 387
L CORNER SLEEVE
Cross references :
Stainless steel endless band, see page 389 - PIPECLAIR sleeves, see page 387
ENDLESS BAND / SS A2
Kit comprising: x nbr of ZACROVIS 1 / 2C 6.3x22 self-drilling tip screws + VA 14 A/F 8 mm + x PIPESIL 80 ml silicone cartridges + x m Strips with x Stainless
heads + 1 tting guide
Roong application:
- Fastening PIPECO or PIPECLAIR onto steel or sandwich panels
Cross references :
Monoblock hex head 8 mm drive end, see page 660 - FEIN screwdrivers, see page 654
PIPECO sleeves, see page 384 - PIPECLAIR sleeves, see page 387
Aluminium
+ Steel
+ Austenitic stainless steel
A2 Aisi 304
+ Silicone mastic
PIPECO FASTENING KIT
FIBRE-CEMENT
For PIPECO No. For PIPECLAIR No. Qty of BULB-TITE Qty of PIPESIL Stainless strip Pack. Code
1-2-3-4 1 16 1 x 80 ml 1 m + 2 heads 1 188 365
5-6-7-8 2-3 32 3 x 80 ml 3 m + 6 heads 1 188 370
Kit comprising: x BULB-TITE 5.2 x 25.4 aluminium rivets + 1 HSS 5.4 x 93 steel drill bit + x PIPESIL 80 ml silicone cartridges + x m Strips with x stainless
heads + 1 tting guide
Roong application:
- Fastening PIPE-CARRE onto bre-cement or aluminium panels
Cross references :
ACCUBIRD or POWERBIRD riveters, see page 675 - PIPECO sleeves, see page 384
PIPECLAIR sleeves, see page 387
Min. pipe
Max. pipe
Cross reference :
Endless band, stainless, see page 389
EPDM quality sleeve: Resistant to temperatures of -30 to +150C and +175C intermittantly
SQUARE-PIPE No. 1 comprises:
- 1 sleeve + 6 A2 stainless steel bolts + 6 stainless steel Vulca washers 14 + 6 nuts + 6 aluminium spacers
MAXI SQUARE PIPE comprises:
- 1 sleeve + 16 A2 stainless steel bolts + 16 stainless steel Vulca washers 14 + 16 nuts + 16 aluminium spacers
Transverse closing system used to t SQUARE PIPE around a square outlet that may or may not be accessible from above. Must be used with a tightening
ring to seal.
Fastens to steel or sandwich panels using the ZACROVIS self-drilling screw kit (code 188 380)
Fastens to bre-cement or aluminium sheets using the BULB-TITE rivet kit (code 188 385)
Roong application:
- Used to seal around square section outlets such as safety posts
Cross references :
Collar for square pipe, see page 394 - ZACROVIS kit (code 188 380), see page 394
BULB-TITE kit (code 188 385), see page 394
Ht : Height - LB : Alu strip width - LE : Baseplate width
Roong application:
- Used to seal around a square section
Cross reference :
Mastic LR SIL 402 (code 492 100), see page 452
SQUARE PIPE FASTENING KIT FOR STEEL SHEET OR SANDWICH PANEL ROOFING
Supracoat 2C coated steel
Zamac head (zinc/alu)
+ Vulca / EPDM washer
KIT
ZACROVIS 1 / 2C
For SQUARE PIPE No. Qty of screws ZACROVIS Hex. head of Pack. Code
1 25 6,3 x 22 8 1 188 380
Kit comprising: 25 or 40 drill tip hex. head self-drilling ZAMAC (zinc/alu) plated screws tted of Alu washer
14 mm
Roong application:
- Fastening a SQUARE-PIPE onto a steel or sandwich panel
Cross references :
Mastic LR SIL 402 (code 492 100), see page 452 - SQUARE-PIPE sleeves, see page 393
Collar for square pipe, see page 394 - Monoblock hex head 8 mm drive end, see page 660
FEIN screwdrivers, see page 654
Cross references :
Mastic LR SIL 402 (code 492 100), see page 452 - SQUARE-PIPE sleeves, see page 393
Collar for square pipe, see page 394 - ACCUBIRD or POWERBIRD riveters, see page 675
Cross references :
Mastic LR SIL 402 (code 492 100), see page 452 - Endless bands, stainless, see page 389
Cross references :
Mastic LR SIL 402 (code 492 100), see page 452 - Endless bands, stainless, see page 389
FLASHCO
EPDM quality: Resistant to temperatures from -30 to +150C and up to +175C intermittently
The two concertina and vulcanised aluminium strips inserted ensure that FLASHCO can stretch by 25% for
easy adaptation on all proles without excessively inating the EPDM lip.
Fastens to steel or sandwich panels using the FLASHCO BAC kit (code 188 605): 200 self-drilling tip hex
head ZAMAC screws + 2 LR SIL402 310 ml cartridges + 1 gun + 1 tting guide
Fastens to bre-cement or aluminium panels using the FLASHCO FIBRO kit (code 188 606): 200 aluminium
BULB-TITE rivets + 1 HSS steel drill + 2 LR SIL402 310 ml cartridges + 1 gun + 1 tting guide
Roong & Cladding application:
Width - Used to seal and connect many proles
Cross references :
FLASHCO BAC kit (code 188 605), see page 397 - FLASHCO FIBRO kit (code 188 606), see page 397
PIPE FLASHING
STATIC EXTRACTOR
Ht
Out. C
AERO-STATs advantages:
- Compliant with standard P 50-413 classication B
- Reduced size - Quick and easy tting - M0 - Full-time ventilation - 100% backdraught - Flexible use - Annimals cannot intrude - Test performed by the
Eiffel Labs wind tunnel
Stainless steeel available on request
ETANCO colour chart, see page 364
Roong applications:
- No motor / No need for electric power, designed to equip outputs:
- From natural ventilation pipes, whether individual or collective
- Natural draw chimneys, whether individual or collective
- Pipes used exhaust burnt gasses and ventilation air (mixted gas)
- Waste chutes, driers or other ventilation conduits for technical facilities
d : Nominal diameter - Ht : Height - Out C : Maximum external duct diameter - ht. : Overall diameter
SNOW-STOP
SNOW-STOP FOR TRAPEZOIDAL OR CORRUGATED STEEL SHEETING
Post-painted galvanized steel
1.5 mm thickness
SENTINEIGE Ga/PsL
Fastens to the timber framework using two painted LBT screw-in lag bolts + PLASTIKA 22x7.5x3 washers
Fastens to the metal framework using two ZACROVIS self-drilling screws + PLASTIKA 22x5.5x3 washers
Building quality paint stove baked
Standard colours:
- Slate grey Ral 5008 (Ref. 8) - Graphite grey Ral 7022 (Ref. 20) - Silex grey Ral 7032 (Ref. 38) -
Sienna Ral 8024 (Ref. 51) - Tile red Ral 8012 (Ref.54) - Lauze Ral 7006 (Ref. 64) -
Brown Ral 8014 (Ref. 68)
Other Ral colours on request
Other models available on request and depending on quantity
Roong applications:
- Snow stop for ribbed steel panels or 850 panels or shallow corrugation 76 x 18 sheets
Cross references :
LBT 2 GALVA-COLOR, see page 44 - ZACROVIS, see page 91 - PLASTIKA washer, see page 409
SENTILUX Ga/PsL
Fastens to the timber framework using two painted LBT screw-in lag bolts + PLASTIKA 22x7.5x3 washers
Fastens to the metal framework using two ZACROVIS self-drilling screws + PLASTIKA 22x5.5x3 washers
Building quality paint stove baked
Standard colours:
- Slate grey Ral 5008 (Ref. 8) - Graphite grey Ral 7022 (Ref. 20) - Silex grey Ral 7032 (Ref. 38) -
Sienna Ral 8024 (Ref. 51) - Tile red Ral 8012 (Ref.54) - Lauze Ral 7006 (Ref. 64) -
Brown Ral 8014 (Ref. 68)
Other Ral colours on request
Other models available on request and depending on quantity
Roong applications:
- Snow stop for metal tile sheet
Cross references :
LBT 2 GALVA-COLOR, see page 44 - ZACROVIS, see page 91 - PLASTIKA washer, see page 409
SNOW-STOP
SNOW-STOP HOOK FOR RIBBED STEEL SHEETS, GALVANIZED CORRUGATED SHEETS OR
FIBRE-CEMENT CORRUGATED SHEET
Hot dip galvanized steel Post-painted galvanized steel
1 mm thickness 1 mm thickness
Standard colours: Slate grey Ral 5008 (Ref. 8) - Graphite grey Ral 7022 (Ref. 20) - Tile red Ral 8012 (Ref.54)
- Lauze Ral 7006 (Ref. 64)
Roong applications:
- Snow stop for ribbed steel panels, galvanized steel or deep corrugation bre-cement roofs
LEAF STOP / PE
LEAF STOP slips between the tiles and the bottom of the gutter, without moving them, thereby stopping any
obstruction to the fall pipes by leaves or twigs
Roong applications:
- Used to protect gutters and water fall pipes.
Cross reference :
Balloon grating, see page 401
Crapal wire
EXTENDABLE
BALLOON GRATING / CRAPAL
N Min. pipe Max. pipe Pack. Code
1 50 70 1 170 510
2 80 100 1 170 520
3 110 130 1 170 530
4 140 160 1 170 540
5 180 200 1 170 550
6 250 300 1 170 560
Balloon grating made of larger diameter, heavier, galvanized wire to limit the chances of it being blown away
during storms
Compliant with standard NF P 84.206.1
Small Large = twice the smaller diameter / Height = 1.5 times the smaller diameter
Painting available on request
Roong applications:
- Used to protect water inlets with a tapered gutter outlet - Compliant with DTU 43/3
Large = twice the smaller diameter / Height = 1.5 times the smaller diameter
Painting available on request
Waterproong application:
- Used to protect water inlets with a tapered gutter outlet - Compliant with DTU 43/3
Small
GRAVEL STOP / Ga
CHAPTER 7
Sealing washer under screw head / under saddle washer 408 to 410
Coloured plastic cap 411 to 413
Waterproofing closer for roofing / cladding / metal roof deck 414 to 427
Anti-vibration sealant / Firebreak sealant 428 to 430
Waterproofing sealant 431 to 445
Cant strip and flashing 446 to 448
Round backing strip 449
Mastic cartridge 450 to 455
Roofing
overview
414 414 398 415 416 314 to 363
For sealing metal roof deck For concreting metal floor deck
428
450 429 & 430 431 to 434 435 436 & 437 438 to 440 441 to 443
399
For screw
EPDM
thick.
Ext. For screw EPDM thick. Pack. Code Pack. Code Pack. Code
14 4,8 - 5,5 1,7 100 299 433 100 299 438 100 299 425
14 6,5 2 100 299 658 100 605 008 100 299 647
16 4,8 - 5,5 2 100 299 515 100 299 522 100 299 509
16 6,5 2 100 299 660 100 299 670 100 299 650
Application:
- Sealing washer for mounting under the screw head.
Application:
- Double sealing washer for mounting under the screw head.
DOME-SHAPED / SS A2
Application:
- Double sealing washer for mounting under the screw head, speacially for bre-cement sheet.
NEO-ELASTO SH 60
Cross references :
Saddles washer, see page 379 - PPSO, see page 372
PLASTIKA
ASTIKA
22 5,5 3 100 401 280
L
22 6,5 3 100 401 270
P
3
22 7,5 3 100 401 260
Cross reference :
Saddles washer, see page 379
R.E.A.C.
Cross reference :
Saddles washer, see page 379
GRECA
Roong application:
- Sealing washer to place under the corrugation Saddles washer for special ONDEX GRECA corrugated
panels
Cross reference :
Greca Saddles washer, see page 379
ETANCO 51 Cap TR
Cross references :
Screw-in lag bolts, see page 44 - Stuff-in lag bolts, see page 47
CAPACH 5
Cross reference :
Special fasteners, see page 116
CAPACH 6
Cross reference :
Special fasteners, see page 116
CAPACH 25
Cross reference :
Special fasteners, see page 116
CAPZAC
Cross reference :
Special fasteners, see page 116
CAP C
ETANCO-CLIP 418
Cross reference :
Clip washer, see page 413
Polyethylene
ETANCO-CLIP 417
Cross reference :
Clip washer, see page 413
CLIP WASHER
Cross reference :
ETANCO-CLIP 418 or 417 caps, see page 412
POINCO 4 & 6
Application:
- POINCO 4: Plastic protective cap for tips of 4.8 mm dia. self-drilling screws
- POINCO 6: Plastic protective cap for tips of 6.3 mm dia. self-drilling or tapping screws
pitch
Polyethylene Polyethylene
CLOSER / PE CLOSER / PE
Prole = P Counter-Prole = CP
Roong prole Nb O. Pitch Ht Thick. Pack. (ml) Code Pack. (ml) Code
SINUSOIDAL CORRUGATION
Shallow corrugation 76x18 11 76 18 15 25 422 020 CP = P
Deep corrugation 177x51 5 177 51 20 50 422 000 CP = P
PST 4 230 66,5 20 25 422 023 50 422 585
ROUND RIB
RIBBED 850 3 283,3 29 20 50 422 110 25 423 110
Polyethylene quality:
- Colour: Light grey - Density: 25 kg/m3 - Hardness: 42 shore - Tensile resistance: 144 kPa - Elongation: 90 % - Compression resistance at 10% = 36 kPa
/ at 25 % = 51 kPa / at 50% = 106 kPa - Compression set: 22 hours, load at 23C compression 25% : Half hour after release = 15% / 24 hours after
release 7% - Heat conductivity at 10C = 0.035 w/mk / at 40C = 0.037 w/mk - Water absorption (28 days) 1% vol. - Temperature for use 100 - Fire
classication 100 Mm/min.
Other roong proles or adhesive, angled or ventilated closers on request
Density of 50 kg/m3 available on request
Roong application:
- Sealing closer for sine wave corrugation
Nonwoven polypropylene
+ Polyethylene
GRILLCO - G.O.
Roong application:
- Sealing closer protected against rodents for roof proles
Thick. : Thickness
COMB CLOSER
Polypropylene
COMB CLOSER
Roong application:
- Comb closer stops small animals while helping to ventilate the underside of the roof
ETANCOL GLUE
The glue ensures longer lasting seal durations on a rigid support (wood, steel, aluminum, glass)
Adhesive is more often used for positioning. Use one 75 cl drum per 3 m (approx.)
Thick. : Thickness
pitch
Polyethylene Polyethylene
CLOSER / PE CLOSER / PE
Prole = P Counter-Prole = CP
Roong prole Nb O. Pitch Ht pb GB Thick. Pack. (ml) Code Pack. (ml) Code
GRECA 15,5 70 18 25 45 15 25 422 030 CP = P
Polyethylene quality:
- Colour: Light grey - Density: 25 kg/m3 - Hardness: 42 shore - Tensile resistance: 144 kPa - Elongation: 90 % - Compression resistance at 10% = 36 kPa
/ at 25 % = 51 kPa / at 50% = 106 kPa - Compression set: 22 hours, load at 23C compression 25% : Half hour after release = 15% / 24 hours after
release 7% - Heat conductivity at 10C = 0.035 w/mk / at 40C = 0.037 w/mk - Water absorption (28 days) 1% vol. - Temperature for use 100 - Fire
classication 100 Mm/min.
Other roong proles or adhesive, angled or vented closers available on request
Roong application:
- Sealing closer for trapezoidal wave corrugation
Roong Overview proles from ACIER GROSJEAN, see page 318
Roong Overview proles from ALUFORM Systems, see page 350
Roong Overview proles from ARCELOR ARCLAD, see page 320
Roong Overview proles from ARCELOR ARVAL, see page 322
Roong Overview proles from BACACIER, see page 324
Roong Overview proles from BEMO Systems, see page 352
Roong Overview proles from CISABAC, see page 326
Roong Overview proles from ETERNIT, see page 358
Roong Overview proles from ISOBAR, see page 328
Roong Overview proles from ISOCAB, see page 330
Roong Overview proles from JORIS IDE, see page 334
Roong Overview proles from KALZIP, see page 354
Roong Overview proles from KINGSPAN, see page 336
Roong Overview proles from LATTONEDIL, see page 338
Roong Overview proles from METECNO, see page 340
Roong Overview proles from MONOPANEL TATA STEEL, see page 342
Roong Overview proles from NLMK Prol btiment, see page 344
Roong Overview proles from ONDEX, see page 361
Roong Overview proles from SPO, see page 346
Roong Overview proles from TOLFER, see page 348
Thick. : Thickness
pitch
Polyethylene Polyethylene
CLOSER - S / PE CLOSER - S / PE
Prole = P Counter-Prole = CP
Cladding prole Nb O. pitch Ht Thick. Pack. (ml) Code Pack. (ml) Code
ALUFORM
ALUFORM 18/76 11 76 18 15 25 422 020 CP = P
ALUFORM 35/137 7 137 35 20 25 429 030 CP = P
ALUFORM 55/177 5 177 55 20 25 428 397 25 428 398
BACACIER
SINUS 18 BV 13 76 18 15 25 422 020 CP = P
SINUS 25 BV 9 115 25 20 25 422 036 CP = P
SINUS 46 BV 6 150 46 20 50 428 903 CP = P
BEMO
BEMO 27/111 9 111,1 27 20 25 422 286 CP = P
BEMO 42/160 6 160 42 20 25 423 180 CP = P
JORIS IDE
CIRRUS 18 13 76 18 15 25 422 020 CP = P
CIRRUS 27 9 111,1 26 20 25 422 286 CP = P
CIRRUS 46 6 150 46 20 50 428 903 CP = P
KALZIP
W 18/76 11 76 18 15 25 422 020 CP = P
pitch
Polyethylene Polyethylene
next CLOSER - S / PE CLOSER - S / PE
Prole = P Counter-Prole = CP
Cladding prole Nb O. pitch Ht Thick. Pack. (ml) Code Pack. (ml) Code
NLMK - Prol Btiment
ONDUBAC 76.18 11 76 18 15 25 422 020 CP = P
SPO
SPONDINE 76/18 11 76 18 15 25 422 020 CP = P
SPONDINE 6.46.900 6 150 46 20 50 428 903 CP = P
Polyethylene quality:
- Colour: Light grey - Density: 25 kg/m3 - Hardness: 42 shore - Tensile resistance: 144 kPa - Elongation: 90 % - Compression resistance at 10% = 36 kPa
/ at 25 % = 51 kPa / at 50% = 106 kPa - Compression set: 22 hours, load at 23C compression 25% : Half hour after release = 15% / 24 hours after
release 7% - Heat conductivity at 10C = 0.035 w/mk / at 40C = 0.037 w/mk - Water absorption (28 days) 1% vol. - Temperature for use 100 - Fire
classication 100 Mm/min.
Other proles available on request
Cladding application:
- Sealing closer for sine wave cladding
Thick. : Thickness
pitch
Polyethylene Polyethylene
CLOSER - T / PE CLOSER - T / PE
Prole = P Counter-Prole = CP
Cladding prole Nb O. pitch Ht pb GB Thick. Pack. (ml) Code Pack. (ml) Code
ALUFORM
ALUFORM 29/124 8 124 29 20 61 20 25 428 400 25 428 410
ALUFORM 30/153 7 153 30 23 60 20 25 428 402 25 428 403
ALUFORM 40/167 6 167 40 34 68 20 25 428 406 25 428 407
ALUFORM 42/250 4 250 42 30 80 20 25 428 871 25 428 872
ALUFORM 45/150 6 150 45 25 70 20 50 428 440 50 428 450
ALUFORM 45/200 5 200 45 40 80 20 25 428 408 25 428 409
BACACIER
FACADEO 8.25 8 125 25 29 99,7 20 50 422 295 CP = P
FACADEO 6.25 6 180,3 25 35 100 20 25 429 995 50 423 175
FACADEO 1060 4 265 25 25 65 20 50 428 820 50 428 830
FACADEO 4.25 4 267,5 25 28 65 15 50 422 170 50 423 170
FACADEO 6.30 6 172 30 35 91,7 20 25 428 046 25 428 045
FACADEO 5.35 5 207 35 40 97 20 25 429 268 50 429 264
FACADEO 4.35 4 250 35 22 63 20 50 428 750 50 428 760
FACADEO 5.40 5 192 40 50 104 20 25 428 411 25 428 412
continued on next page
pitch
Polyethylene Polyethylene
next CLOSER - T / PE CLOSER - T / PE
Prole = P Counter-Prole = CP
Cladding prole Nb O. pitch Ht pb GB Thick. Pack. (ml) Code Pack. (ml) Code
BEMO
BEMO 20-75 12 75 20 23 52 20 25 428 570 25 428 571
BEMO 35-207 5 207 35 40 88 20 25 428 572 25 428 489
CISABAC
CISA 30 B 5 214 30 40 109 20 25 428 574 25 422 122
CISA 33 B 5 207 33 40 97 20 50 428 454 50 428 455
CISA 40 B 4 250 40 20 65 20 50 422 390 50 423 290
JORIS IDE
PML 25.1025.1000 8 125 25 28 97 20 50 422 295 CP = P
PML 25.180.1085 6 180,8 25 40 100 20 25 430 005 25 430 006
PML 25.267.1070 4 267,5 25 25 65 15 50 422 170 50 423 170
PML 25.840 3 280 25 40 60 15 25 422 100 50 423 100
PML 30.207.1035 5 207 30 40 97 20 25 428 819 25 428 804
PML 33.250.100 4 250 33 22 63 20 50 428 808 50 428 809
PML 35.207.1035 5 207 35 40 97 20 25 428 800 25 428 802
PML 40.183.915 5 183 40 40 64 20 50 422 220 50 423 220
JURA 5 190 40 50 105 20 25 422 143 25 422 142
KALZIP
TR 24/100 10 100 24 29 74 15 25 422 290 CP = P
TR 30/167 6 167 28 35 72 20 25 422 302 25 429 860
TR 29/124 8 124 29 20 61 20 25 428 400 25 428 410
TR 35/200 C 5 200 35 35 90 20 50 422 305 50 423 305
TF 800 R 3 266,7 37 20 25 422 873 25 422 874
TR 40/185 5 185 40 35 75 20 25 423 155 25 423 156
TR 45/150 6 150 45 25 70 20 50 428 440 50 428 450
TR 50/167 5 166,7 50 35 69 20 25 422 310 25 423 310
pitch
Polyethylene Polyethylene
next CLOSER - T / PE CLOSER - T / PE
Prole = P Counter-Prole = CP
Cladding prole Nb O. pitch Ht pb GB Thick. Pack. (ml) Code Pack. (ml) Code
BELLINA 5 183 40 41 63 20 50 422 220 50 423 220
SIDMUR E 4 250 40 20 65 20 50 422 390 50 423 290
ATHENA 5 186 44 66 120 20 50 423 226 CP = P
SPO
NERBA 8.25.1030 8 129,3 25 33 97 20 25 429 103 25 429 100
NERBA 6.25.1085 6 180,8 25 35 100 20 25 429 995 50 423 175
NERBA 4.267,5.25 4 267,5 25 30 62,5 15 50 422 170 50 423 170
NERBA 5.207.35 5 207 35 30 83 20 50 428 483 50 428 484
NERBA 3.35.1000 3 333 35 23 70 20 50 428 458 50 428 459
NERBA 5.40.915 5 183 40 40 64 20 50 422 220 50 423 220
Polyethylene quality:
- Colour: Light grey - Density: 25 kg/m3 - Hardness: 42 shore - Tensile resistance: 144 kPa - Elongation: 90 % - Compression resistance at 10% = 36 kPa
/ at 25 % = 51 kPa / at 50% = 106 kPa - Compression set: 22 hours, load at 23C compression 25% : Half hour after release = 15% / 24 hours after
release 7% - Heat conductivity at 10C = 0.035 w/mk / at 40C = 0.037 w/mk - Water absorption (28 days) 1% vol. - Temperature for use 100 - Fire
classication 100 Mm/min.
Other proles, on request
CP = Counter-Prole: seals the major trapeze panels
Cladding application:
- Sealing closer for trapezoidal wave cladding prole
Thick. : Thickness
Ht
Pitch
Polyethylene
CLOSER / PE
Counter-Prol = CP
Sealing support Nb O. pitch Ht pb GB Thick. Pack. (ml) Code
ARVAL BY ARCELOR MITTAL
HACIERCO 34 SR 4 258,7 33 20 70 20 50 422 602
HACIERCO 39 TSE 3 333 39 22 72 20 50 428 740
HACIERCO 40 SR 4 250 40 20 70 20 50 422 605
HACIERCO 46 S 4 237,5 46 20 70 20 50 422 604
HACIERCO 56 S 4 222,5 56 20 70 20 50 422 631
HACIERCO 74 SPA / SPS 4 214 74 24 70 30 50 422 620
BACACIER
ALTEO 37.1050 4 265,7 37 20 70 20 50 422 629
ALTEO 42.1010 4 252,5 42 20 70 20 50 422 626
ALTEO 59.900 4 225 59 20 70 20 25 422 632
ALTEO 106.750 3 250 106 40 120 30 50 429 060
CISABAC
CISA 1000 / 40 SE 4 250 40 20 66 20 50 423 290
CISA 966 / 47 SE 4 241,5 47 20 70 20 50 429 020
JORIS IDE
PML 36 SE 4 260 36 20 70 20 50 428 814
PML 37 SE 4 265 37 21 70 20 25 428 810
PML 42 SE 4 252,5 42 20 70 20 50 422 626
PML 56 SE 4 225 56 25 70 20 25 428 807
PML 73 SE 4 195 73 24 70 30 25 422 009
PML 106 SE 3 250 106 37 110 30 50 429 060
PML 135 SE 3 310 137 43 166 30 50 429 063
PML 153 SE 3 280 153 41 161 30 50 429 064
Ht
Pitch
Polyethylene
CLOSER / PE
next Counter-Prol = CP
Sealing support Nb O. pitch Ht pb GB Thick. Pack. (ml) Code
NERVOBAC 42 4 252,5 42 20 70 20 50 422 626
NERVOBAC 44 4 250 44 23 70 20 50 423 283
NERVOBAC 48 4 238,5 48 24 70 20 25 423 285
NERVOBAC 57 4 227,5 57 22 70 20 50 423 286
NERVOBAC 72 4 200,5 72 22 70 30 50 428 847
SIPLAST
PARASTEEL 42 3 257 42 20 70 20 25 422 105
SPO
NERSUP C 32 S 4 252,5 42 20 70 20 50 422 626
Polyethylene quality:
- Colour: Light grey - Density: 25 kg/m3 - Hardness: 42 shore - Tensile resistance: 144 kPa - Elongation: 90 % - Compression resistance at 10% = 36 kPa
/ at 25 % = 51 kPa / at 50% = 106 kPa - Compression set: 22 hours, load at 23C compression 25% : Half hour after release = 15% / 24 hours after
release 7% - Heat conductivity at 10C = 0.035 w/mk / at 40C = 0.037 w/mk - Water absorption (28 days) 1% vol. - Temperature for use 100 - Fire
classication 100 Mm/min.
CP = Counter-Prole: seals the major trapeze panels
Adhesive closers on request: High plasticity adhesive strip ensures excellent positioning on all supports
Other proles on request
Waterproong application:
- Waterproong closer for waterproong base Ribbed Steel Panels
Thick. : Thickness
White polyurethane
BLOCK / PU
Polyethylene
BLOCK / PE
JORIS IDE
PML 60 30 100 492 915
Thick. : Thickness
Ht
Pitch
Polyethylene
CLOSER / PE
COFRAPLUS 60 C
Closer Nb O. pitch Ht pb GB Thick. Pack. (ml) Code
Counter-prole 5 207 58 62 101 20 50 429 835
Prole 5 207 58 62 101 20 25 429 843
Polyethylene quality:
- Colour: Light grey - Density: 25 kg/m3 - Hardness: 42 shore - Tensile resistance: 144 kPa - Elongation: 90 % - Compression resistance at 10% = 36 kPa
/ at 25 % = 51 kPa / at 50% = 106 kPa - Compression set: 22 hours, load at 23C compression 25% : Half hour after release = 15% / 24 hours after
release 7% - Heat conductivity at 10C = 0.035 w/mk / at 40C = 0.037 w/mk - Water absorption (28 days) 1% vol. - Temperature for use 100 - Fire
classication 100 Mm/min.
CP = Counter-Prole: seals the major trapeze panels
Adhesive closers available on request: The high plasticity adhesive strip ensures excellent positioning on all supports
Other proles available on request
Waterproong application:
- Concreting and metal deck prole ribbing sealing block
SINGLE CLOSER
Ht
Pitch
Polyethylene
CLOSER ADH / PE
COFRAPLUS 60 C
Closer Adhesive side Nb O. pitch Ht pb GB Thick. Pack. (ml) Code
Counter-prole Onde 5 207 58 62 101 20 20 429 830
Counter-prole Semelle 5 207 58 62 101 20 20 429 833
Polyethylene quality:
- Colour: Light grey - Density: 25 kg/m3 - Hardness: 42 shore - Tensile resistance: 144 kPa - Elongation: 90 % - Compression resistance at 10% = 36 kPa
/ at 25 % = 51 kPa / at 50% = 106 kPa - Compression set: 22 hours, load at 23C compression 25% : Half hour after release = 15% / 24 hours after
release 7% - Heat conductivity at 10C = 0.035 w/mk / at 40C = 0.037 w/mk - Water absorption (28 days) 1% vol. - Temperature for use 100 - Fire
classication 100 Mm/min.
CP = Counter-Prole: Seals the main panel trapeze sections
Adhesive closers available on request: The high plasticity adhesive strip ensures excellent positioning on all supports
Other proles available on request
Waterproong application:
- Concreting and metal deck prole ribbing sealing block
Thick. : Thickness
M0 STRIP
Ht pb GB Code
40 18 52 429 880
40 20 70 429 879
40 21 60 429 881
50 25 55 429 882
50 25 62 429 883
60 25 70 429 884
70 25 70 429 885
Strip, non-berizing - 90 Kg / m
Waterproong application:
- Strip for lling grooves in the solid steel Waterproong metal sheet
Cross references :
Bridging strips, see page 427 - Tape dispenser (code 905 072), see page 427
Cross references :
Bridging strips, see page 427 - Tape dispenser (code 905 072), see page 427
Ht : Height
BRIDGING STRIP
Prevents hot bitumen from running under the panel through the perforations
Waterproong application:
- Bridging strip for protecting glued Foamglas insulation
Cross references :
Bridging strips, see page 427 - Tape dispenser (code 905 072), see page 427
TAPE DISPENSER
Prevents hot bitumen from running under the panel through the perforations
Waterproong application:
- Tape dispenser for applying a bridging strip (100 mm) to protect the glued Foamglas insulation
Cross references :
Bridging strip, 100 mm wide (code 905 070), see page 427 - Filler strips, see page 426
Thanks to its ne cell structure, LR SYLOMER has the necessary degree of mass compressibility required for static and dynamic applications.
It therefore forms the ideal pressure material needed to ensure uniform load spreading over the entire surface area.
This advantage offers precious construction and cost advantages.
Vibration protection.
Durable wear resistance
Can be made to measure, ask us.
Technical datasheet available on request
Application:
- Is used in construction projects in concrete, road, rail and industry applications under machinery and tooling
JOINTAFEU
JOINTAFEU Height Width PUM Strip length (meters) Pack. (m) Code
20 48 30 16-24 * 2 80 437 400
30 55 43 24-36 2 46 437 402
40 74 61 32-48 2 24 437 404
60 90 83 48-72 2 10 437 406
(*) JOINTAFEU 20 has been stretched by 20% (i.e. spread out by 4 mm) before testing, achieving the same
results as without movement during the re resistance test.
Four hour re break, sealed to hot gasses and smoke, heat insulated for 4 hours (EI 240).
Tested to EN 1366-3 (compliant with the Act of 22 Mars 2004):
Test certicate No. RS08-029 dated 03 June 2008 issued by CSTB.
EI 240 classication (re break).
Mechanical resistance tested by IFP, over more than 15,000 compression / decompression cycles.
Exceptional durability.
Adapts to building movements, e.g. earthquake, faade movement, expansion from -20 to 60C.
Easy to t by hand, with no need for tools, glue or mastic thereby saving supplies and labor.
Hydrocarbon resistant (suitable for parking areas) IFP tested.
Guaranteed halogen derivative-free.
Application:
- For treating expansion and separation seals between concrete elements, slabs or shells. The seal may
be located at the top, middle or base of the slab (refer to the classication certicate for more
information).
MOUSSAFEU
Cross reference :
MOUSSAFEU gun (code 344 598), see page 430
MOUSSAFEU Gun
thick. MOUSSACRYL PC 600 Grey is an adhesive seal under plastic lm, individually packed.
Adhesive face In polyurethane foam with open cells, fully impregnated with a modied acrylic polymer (with a class B1 ame
retardant) making it wateproof and ensure very good resistance to ageing under certain compression levles,
while retarding its return to its initial dimensions, once the compression effect has stopped. When in use, it is
pressure resistant up to 1,200 Pascal.
Good acoustic performance levels
MOUSSACRYL PC 600 alone ensures single stage sealing against air and water and may also be used as
the initial barrier for a two stage seal.
For use where the compression ratio is less than 50%, take uncompressed MOUSSAFOAM GREY, see page
435
Density: 70 Kg / m3
Temperature resistance: - 40C to + 100C
Technical datasheet available on request
Other sections on request
Application:
- Used to ensure waterproong to 600 pa, air permeability of less than 600 l/(hm) for single stage seals.
Refer to the specications approved by the Socotec technical survey No. ZX0208/1
- Used as a seal between prefabricated concrete pieces, conventional masonry or reinforced concrete, as
a renovation seal for existing faades, for providing heat insulation seals applied from the outside.
MOUSSACRYL PC 600 Black is an adhesive seal under plastic lm, individually packed.
In polyurethane foam with open cells, fully impregnated with a modied acrylic polymer (with a class B1 ame
retardant) making it wateproof and ensure very good resistance to ageing under certain compression levles,
while retarding its return to its initial dimensions, once the compression effect has stopped. When in use, it is
pressure resistant up to 1,200 Pascal.
Good acoustic performance levels
MOUSSACRYL PC 600 alone ensures single stage sealing against air and water and may also be used as
the initial barrier for a two stage seal.
For use where the compression ratio is less than 50%, take uncompressed MOUSSAFOAM GREY, see page
435
Density: 70 Kg / m3
Temperature resistance: - 40C to + 100C
Technical datasheet available on request
Other sections on request
Application Facade:
- Provides a seal against heavy rain up to 1,200 Pa, for sandwich panel with visible open front seal
MOUSSACRYL Standard Grey is an adhesive seal under plastic lm, individually packed.
Made from polyurethane foam with alternating cells with a core made from a modied acrylic polymer with
ame retardent giving it good resistance to ageing under a certain degree of compression, while delaying its
return to its initial dimensions, once compression ends.
For use where the compression ratio is less than 50%, use uncompressed MOUSSAFOAM GREY, see page
435
Density: 70 Kg / m3
Temperature resistance: - 40C to + 100C
Technical datasheet available on request
Other sections on request
Application:
- Used for sealing between roong and frames: Expansion joints, window sills. Seal between walls with
primary nish roughness, infrastructure, cladding, bridging. Sealing is dependent on the degree of
compression which can go as far a 90% of the thickness.
MOUSSAFOAM Grey
Width x Thick. Roll lg. (ml) No. rolls Pack. (m) Code
10 x 5 6 60 360 446 100
15 x 5 6 38 228 446 600
20 x 5 6 30 180 446 000
25 x 5 6 23 138 446 620
30 x 5 6 20 120 446 630
40 x 5 6 18 108 446 250
Thick. : Thickness
Thick. : Thickness
Thick. : Thickness
Thick. : Thickness
MOUSSAVICQ
Width x Thick. Roll lg. (ml) No. rolls Pack. (ml) * Code
15 x 3 20 21 420 449 040
20 x 3 30 32 960 449 050
50 x 3 30 6 180 449 080
Thick. : Thickness
MOUSSAVICQ SF
Width x Thick. Roll lg. (ml) S.F. (ml) * Outer Pack. (ml) Code
15 x 3 20 60 420 449 041
20 x 3 30 90 450 449 051
20 x 20 5 10 80 449 401
Thick. : Thickness
LRC ECO
Width x Thick. Roll lg. (ml) No. Rolls Pack. (ml) * Code
10 x 3 30 32 960 434 500
15 x 3 30 21 630 434 502
20 x 3 30 32 960 434 503
30 x 3 30 21 630 434 505
40 x 3 30 16 480 434 507
50 x 3 30 12 360 434 508
Thick. : Thickness
LRC
Width x Thick. Roll lg. (ml) No. rolls Pack. (ml) * Code
10 x 3 10 32 320 434 100
15 x 3 20 21 420 434 108
20 x 3 30 32 960 434 110
30 x 3 30 10 300 434 120
40 x 3 30 8 240 434 130
50 x 3 30 6 180 434 140
60 x 3 30 10 300 434 145
100 x 3 30 6 180 434 149
Thick. : Thickness
LRC SF
Width x Thick. Roll lg. (ml) S.F. (ml) * Outer Pack. (ml) Code
10 x 3 10 50 250 434 101
15 x 3 20 60 420 434 109
20 x 3 30 90 450 434 111
30 x 3 30 60 300 434 121
40 x 3 30 30 240 434 131
50 x 3 30 30 180 434 141
20 x 15 6 18 90 434 271
30 x 15 6 12 60 434 281
40 x 15 6 6 48 434 291
Thick. : Thickness
EPDM SEAL
Width x Thick. Roll lg. (ml) No. rolls Pack. (ml) * Code
10 x 3 10 32 320 436 894
15 x 3 20 21 420 436 900
20 x 3 30 16 480 436 910
30 x 3 30 10 300 436 920
40 x 3 30 8 240 436 930
50 x 15 6 6 36 437 260
PRE-CUTTING, ASK US
PRE-CUTTING
Option Code
On request Ask us
Thick. : Thickness
ETANCOPAST
Roll lg. (ml) For proles No. rolls Pack. (ml) * Code
5,5 8 Sheet 22 176 443 050
7,5 7 Small corrug. - Sheet 22 154 443 070
9,5 6 Large corrug. Fibre-cement 16 96 443 090
14 4 SUPERONDE 16 64 443 140
SUPER ETANCOPAST
Width x Thick. Roll lg. (ml) No. rolls Pack. (ml) * Code
12 x 3 13 22 286 443 062
Thick. : Thickness
LR SOL IN
TRIANGLE BPC
Seal polyester polyurethane foam with open cells, anthracite gray colour
Resistance to acids, bases and alkalis
Height
Least resistance to hydrocarbons and oils
Self-extinguishing (Fire FMVSS 302)
Insulation in air and dust
Used for sound control, vibration and thermal insulation
Density: 27 Kg / m3
Temperature resistant from -40 to +70C, from +5 in use
pb Technical datasheet available on request
Other sections on request
COBAND
Aluminium
COBAND comprises a exible 2/100ths aluminium sheet on one side and a high adhesive performance when
face cold butyl product on the other, protected by silicone paper
CEBTP approval for use No. 2300/91 - 01 - 1
Fire reaction classication M1 (Report No. 22002-A)
Very high resistance to coating tearing and abrasion - Permanent plasticity
Caoutchouc Application is possible even in the cold, with no need for special tooling - Does not contain bitumen or tar -
100% BUTYL
No creep - Does not stain paint.
Protected by Immediate adhesion without the need for heating unlike bitumen based products, ensuring immediate
silicone paper
waterproong.
Self-adhesive when cold - Stable from -30C to +100C - Excellent UV resistance - Rotproof - Sealed to
water vapor - Compression strength with 50% deformation of the initial thickness: 9 bar
Plasticity of the butyl layer (measured with an ASTM D 217 penetration gauge): 80 at 20 - Excellent
adherence on all supports: Steel, glass, aluminum, zinc, polyester, PVC, wood, concrete, render, cement
COBAND when stored dry and cool can be kept one year
Technical datasheet available on request
Application:
- The essential product for additiional sealing on all terrace roofs
- Bridging band: Seals zinc ashing, gutters, concrete roof gutters, fall pipes, chimney joins, side strips,
terrace raised surrounds
- Caulking windows and repairing, sealing and cold air ducts
PRE-FIX ROLLS
width
Adhesive seal (rubber resin) on both sides + white silicone protective paper
Temperature resistance: +10C to +60C
Elongation: To DIN 53455
Advantages of the PRE-FIX seal: Stops panels from sliding during tting, saves workers from having to hold
steel accessories while screwing down or inserting rivets into their holes, reinforces airtightness.
Application:
- Pre-positioning seal for cladding panels (covering and accessories)
Cross references :
Silicone mastic, see page 452 - Acrylic mastic, see page 453 - Polyurethane mastic, see page 454
LR MASTIC
Product Mastic Sealing Elasticity Adhesive 100% Shore Painting Fungicide Food Label
name type bonding extension hardness option products
module
MS Polymer yes yes yes 1.50 N/mm2 50 yes yes yes -
LR WATER SEAL hybrid (without officiel test)
MS Polymer yes yes flexible 0.68 N/mm 2
35 yes yes yes SNJF
LR WATERJOINT hybrid (without officiel test)
LR SIL 402 Silicone yes yes - 0.22 N/mm 2
15 - - yes SNJF
LR WATER SEAL
Cross references :
Mastic guns, see page 703 - Sealant base, see page 449
LR MASTIC
HYBRID POLYMER MS MONO-COMPONENT ELASTOMER MASTIC - MEDIUM MODULE
Colour elastomer
LR WATERJOINT
SNJF classication
Technical datasheet on request
Medium module (super glue)
Powerful tacking effect (instant gluing capacity)
Contains no isocyanate and oxyme (user safe)
Contains a fungicide and is food-safe
Sticks to wet supports
Can be painted
Hardly electrostatic
Adheres without a primer to non ferrous metals (zinc, copper, lead)
Little shrinkage after hardening
Adheres without a primer to porous supports
Application:
- LR Waterjoint performs perfectly for exible gluing and especially for all expansion and nish seals,
whether horizontal or vertical, in indoor or outdoor construction projects.
- Ideal for oor level expansion seals - Gluing and forming seals in refrigerated or food industry
construction projects - Swimming pool liner repairs - Ensures powerful and exible automotive,
industrial, marine, aeronautical, prefabrication applications
Cross references :
Mastic guns, see page 703 - Sealant base, see page 449
PIPESIL
Neutral single component elastomer silicone - Ready for use - Hardening at ambient temperature through the
action of dampness in the air
Application:
- Seal for PIPECO and PIPECLAIR roof outlets. Used without a gun.
Cross references :
PIPECO sleeves, see page 384 - PIPECLAIR sleeves, see page 387
LR MASTIC
UNIVERSAL NEUTRAL 402 SILICONE MASTIC
Colour silicone
LR SIL 402
Cross references :
Mastic guns, see page 703 - Sealant base, see page 449
SILICONE COLOR
Neutral single component elastomer silicone - Ready for use - Hardening at ambient temperature through the
action of dampness in the air
Compliant with food-safe requirements
First category elastomer - No primer on concrete, aluminum and glass.
Manufactured in multiples of 75 cartridges per Colour.
Technical datasheet on request
Application:
- Multi-use sealent
Cross references :
Mastic guns, see page 703 - Sealant base, see page 449
LR MASTIC
NEUTRAL SILICONE MASTIC - SPECIAL STONE
Colour silicone
LR STONE
Neutral single component elastomer silicone - Ready for use - Hardening at ambient temperature through the
action of dampness in the air
Does not migrate, does not cause stains on natural stones
Manufactured in multiples of 75 cartridges per Colour.
Technical datasheet on request
Application:
- Adherent without primer on almost all materials found in building, such as glass, aluminium, reinforced
concrete, ABS, hard polystyrene, brass, bronze, steel, stainless steel, galvanised steel, tile
Cross references :
Mastic guns, see page 703
LR CRYL
Cross references :
Mastic guns, see page 703 - Sealant base, see page 449
LR MASTIC
POLYURETHANE ADHESIVE MASTIC - MEDIUM MODULE
Colour polyurethane resin based
GLR PU
Cross references :
Mastic guns, see page 703
LR COL
Cross reference :
Mastic guns, see page 703
LR MASTIC
SELF-EXPANDING SEMI-HARD PREPOLYMER POLYURETHANE FOAM - APPLIED UNDER
PRESSURE
Polyurethane foam
GLR PURFOAM
Cross references :
Cleaner (code 492 954), see page 455 - Extra nozzle (code 492 952), see page 455
EXTRA NOZZLE
PURFOAM NOZZLE
Pack. Code
1 492 952
Application:
- Replacement nozzle for PURFOAM aerosol
Cross reference :
PURFOAM foam (code 492 950), see page 455
AEROSOL CLEANER
PURFOAM CLEANER
Application:
- Cleaning the nozzle and removing any polyurethane foam or PU glue that has not hardened
Cross reference :
PURFOAM foam (code 492 950), see page 455
CHAPTER 8
462 463
464 465
466 & 467 467 & 468 469 & 470 471 & 472 473 & 474
Drilled or punctured
ETANCOPLAST HP 6 steel sheet 40 82 x 40
481 & 482 483 & 484
+ SUPRACOAT 2C Coated steel screw 481 to 484
ETANCOPLAST HP 6 Concrete 40 82 x 40
485 486
501 502
Fastening ETA
Mechanically fastened flexible roof systems for waterproofing membranes is now covered by new European regulations.
This required that the waterproofing membranes and their mounting fasteners are covered by European Technical Approvals (ETAs)
and bear CE markings. The ETANCO fasteners marked are covered by an ETA and have CE markings issued by CSTB.
This approval completed by CE markings show compliance:
- By fastening systems with the demands of the ETAG 006 guide (the European reference text),
- By the factory production inspection procedures.
Summary of the ETANCO fastening systems (fastener + mounting plate) with an ETA and CE marking.
This list is provided only as information purposes, because it is continually being expanded:
On steel sheet support Thickness : 0.8 0.8 0.75 to 1.5 0.75 to 1.5 0.8 0.75 to 1.5 0.75 to 2x1 0.75 to 2x1
On concrete
Vis
Sealing
dtanchit
screw : MULTIFAST TB / SS A2 MULTIFAST DF TB TX / SS A2
Page : 76 77
Matire ::
Material SS A2 SS A2
On cellular concrete
On wood
HP 4: Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
For screw HP 6: Complying with ETAG 006.EOTA
For steel sheet application:
- Insulation thickness = Plastic barrel length + Screw length - 50 mm
- HP 4: Used with 4.8 bugle head screws (EGB/2C & ISODRILL TT), see page 74
- HP 6: Used with 6.3 countersink head screws (FASTOVIS TF 3036 / 2C), see page 149
For concrete support:
- Insulation thickness = Plastic barrel length + Screw length - Anchoring depth - 30 mm
- Recommanded Anchoring depth: 35 mm
- HP 6: Used with 6.6 screws for concrete (BETOFAST TB TX / 3C), see page 179
Advantages of ETANCOPLAST HP:
- Provides the breakdown of thermal bridge
- Provides non-perforation of waterproong
- Reduces screw corrosion
- Facilitates penetration in the various complex sealing
- Divided by 5 the heat transfer coefcient
- Reduces the cost of roof at equivalent thermal performance
Waterproong application:
- HP 4: Washer distribution with thermal barrier system for xing sealing (Asphalt membrane) on solid
steel sheet
- HP 6: Washer distribution with thermal barrier system for xing sealing (Asphalt membrane) on
perforated steel sheet or at ou concrete support
Cross references :
Bugle head screw (EGB / 2C), see page 157 - Bi-metal bugle head screw (ISODRILL TT), see page 74
Countersink head screw (FASTOVIS TF 3036 / 2C), see page 149
Concrete support screw (BETOFAST TB TX / 3C), see page 179
ANDYPLAST HPSetting tool, see page 666
ETANCOPLAST HP 4 / 40 pre-tted with screw, see page 475
ETANCOPLAST HP 6 / 40 pre-tted with screw, see page 481
ETANCOPLAST HP 6 / 40 pre-tted with BETOFAST, see page 485
Cross reference :
ETANCOPLAST HP 40, see page 462
HP 4: Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
For screw HP 6: Complying with ETAG 006.EOTA
For steel sheet application:
- Insulation thickness = Plastic barrel length + Screw length - 50 mm
- HP 4: Used with 4.8 bugle head screws (EGB/2C & ISODRILL TT), see page 74
- HP 6: Used with 6.3 countersink head screws (FASTOVIS TF 3036 / 2C), see page 149
For concrete support:
- Insulation thickness = Plastic barrel length + Screw length - Anchoring depth - 30 mm
- Recommanded Anchoring depth: 35 mm
- HP 6: Used with 6.6 screws for concrete (BETOFAST TB TX / 3C), see page 179
Advantages of ETANCOPLAST HP:
- Provides the breakdown of thermal bridge
- Provides non-perforation of waterproong
- Reduces screw corrosion
- Facilitates penetration in the various complex sealing (Asphalt or synthetic) + insulation
- Divided by 5 the heat transfer coefcient
- Reduces the cost of roof at equivalent thermal performance
Waterproong application:
- HP 4: Washer distribution with thermal barrier system for xing sealing (Asphalt or synthetic) on solid
steel sheet
- HP 6: Washer distribution with thermal barrier system for xing sealing (Asphalt or synthetic) on
perforated steel sheet or at or concrete support
Cross references :
Bugle head screw (EGB / 2C), see page 157 - Bi-metal bugle head screw (ISODRILL TT), see page 74
Countersink head screw (FASTOVIS TF 3036 / 2C), see page 149
Concrete support screw (BETOFAST TB TX / 3C), see page 179
ANDYPLAST HPSetting tool, see page 666
ETANCOPLAST HP 4 / 82x40 pre-tted with screw, see page 478
ETANCOPLAST HP 6 / 82x40 pre-tted with screw, see page 483
ETANCOPLAST HP 6 / 82x40 pre-tted with BETOFAST, see page 486
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by the CSTB
Used with 4.8 mm bugle head screws
For solid steel sheet application:
- Insulation thickness = Plastic barrel length + Screw length - 40 mm
Advantages of ETANCOPLAST:
- Provides the breakdown of thermal bridge
3 screw
- Provides non-perforation of waterproong
retainer
stops - Reduces screw corrosion
Waterproong application:
- Washer distribution with thermal barrier for xing sealing (Asphalt or synthetic) to solid steel sheet
3 mounting
grooves
Cross references :
Bugle head screw (VMS / 2C), see page 156 - Bugle head screw (EGB / 2C), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74
ETANCOPLAST 50 pre-tted with screw, see page 488
Complying with ETAG 006.EOTA and benets an ATE No. 08/0239 issued by the CSTB
Used with 4.8 mm bugle head screws
For steel sheet application:
- Insulation thickness = Plastic barrel length + Screw length - 40 mm
Advantages of ETANCOPLAST:
- Provides the breakdown of thermal bridge
3 screw - Provides non-perforation of waterproong
retainer - Reduces screw corrosion
stops Waterproong application:
- Washer distribution with thermal barrier for xing sealing (Asphalt or synthetic) to solid steel sheet
3 mounting
grooves
Cross references :
Bugle head screw (VMS / 2C), see page 156 - Bugle head screw (EGB / 2C), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74
ETANCOPLAST T 82x40 pre-tted with screw, see page 490
(1) Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
(2) Complying with ETAG 006.EOTA
Waterproong application:
- Distribution plate for mechanical fastening of insulation and sealing - Complying with DTU 43.3
Cross references :
Bugle head screw (EG - VMS), see page 156 - Bugle head screw (EGB), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74 - Wafer head screw (EVF - EVB), see page 142
Rivets 4.8 mm, see page 193
Waterproong application:
- Distribution plate for mechanical fastening of insulation - Complying with DTU 43.3
Cross references :
Bugle head screw (EG - VMS), see page 156 - Bugle head screw (EGB), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74 - Wafer head screw (EVF - EVB), see page 142
Rivets 4.8 mm, see page 193
Hole : Hole diameter
6 3,5 Bugle head - Wafer - Rivet 4.8 - Multifast TB 1000 294 665
Cross references :
Wafer head hi-thread screw (EVDF), see page 146 - Bugle head screw (EG - VMS), see page 156
Bugle head screw (EGB), see page 157 - Bi-metal bugle head screw (ISODRILL TT), see page 74
Wafer head screw (EVF - EVB), see page 142 - Rivets 4.8 mm, see page 193
Pan head screw (MULTIFAST TB SS), see page 76
Countersink screw (FASTO TF 2036 - FASTOVIS TF 3036), see page 148
Nails (NAILFIX), see page 237 - Concrete screws (BATIFAST TP), see page 181
TAPCO TF impact anchors, see page 223
Cross references :
Hex head hi-thread screw (EHB DF), see page 128
Wafer head hi-thread screw (EVDF - EVB DF), see page 146
Wafer head screw (EVF - EVB), see page 142
Hole : Hole diameter
Cross references :
Hex head hi-thread screw (EHB DF), see page 128
Wafer head hi-thread screw (EVDF - EVB DF), see page 146
Bugle head screw (EG - VMS), see page 156 - Bugle head screw (EGB), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74 - Wafer head screw (EVF - EVB), see page 142
Rivets 4.8 mm, see page 193
Cross references :
Concrete hi-thread screw (BETOFAST TH DF), see page 178
Concrete screw (BETOFAST TH), see page 177 - Bugle head screw (EG - VMS), see page 156
Bugle head screw (EGB), see page 157 - Bi-metal bugle head screw (ISODRILL TT), see page 74
Countersink hi-thread screw (FASTO TF 2036 DF - FASTOVIS TF 3036 DF), see page 152
Countersink screw (FASTO TF 2036 - FASTOVIS TF 3036), see page 148
Nails (NAILFIX), see page 237 - Screw BATIFAST TP, see page 181
TAPCO TF impact anchors, see page 223 - Peel rivets TRP, see page 192
Hole : Hole diameter
5,1 8 Wafer DF (EVB DF1.5 - EVDF *1) - TH DF 4.8 *1 (EHB DF1.25 - ISODRILL 1000 294 705
TH DF *1) (EHB DF3 2) - Bugle (ISODRILL TT - VMS 1) - Wafer (EVF 1)
6,2 3,8 Countersink 3036 DF *1 - Countersink 3036 1 - Multifast TB 1 1000 294 656
Cross references :
Screws in strips, hex head hi-thread (EHB DF / 2C in STRIPS), see page 130
Fastening machine ET 240, see page 665 - Hex head hi-thread screw (EHB DF), see page 128
Hex head hi-thread screw (ISODRILL TH DF), see page 67
Wafer head hi-thread screw (EVDF - EVB DF), see page 146
Bugle head screw (EG - VMS), see page 156 - Bugle head screw (EGB), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74 - Wafer head screw (EVF - EVB), see page 142
Concrete hi-thread screw (BETOFAST TH DF), see page 178
Concrete screws (BETOFAST TH), see page 177
Cellular concrete or wood screws (MULTIFAST DF), see page 77
Countersink hi-thread screw (FASTOVIS TF 3036 DF), see page 153
Countersink screw (FASTOVIS TF 3036), see page 149
Pan head screw (MULTIFAST TB SS), see page 76 - Nails (NAILFIX), see page 237
Concrete screws (BATIFAST TP), see page 181 - Peel rivets TRP, see page 192
Hole : Hole diameter
(1) Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
(2) Complying with ETAG 006.EOTA
Reinforced plate with very high bending strength
Waterproong application:
- Distribution plate for mechanical fastening waterproong with rigid insulation or no insulation
Cross references :
Wafer head hi-thread screw (EVDF - EVB DF), see page 146
Bugle head screw (EG - VMS), see page 156 - Bugle head screw (EGB), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74 - Wafer head screw (EVF - EVB), see page 142
Rivets 4.8 mm, see page 193 - Nails (NAILFIX), see page 237
TAPCO TF impact anchors, see page 223 - HEMA anchors, see page 238
Cellular concrete or wood screws (MULTIFAST TF), see page 84
Waterproong application:
- Distribution plate for mechanical fastening waterproong
Cross references :
Bugle head screw (EG - VMS), see page 156 - Bugle head screw (EGB), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74 - Wafer head screw (EVF - EVB), see page 142
Hole : Hole diameter
6,2 6 Countersink 3036 DF *1 - Countersink 2036 DF *2 - Countersink 3036 1 - 1000 294 781
Countersink 2036 2 - Multifast TB 1 - Rivet 4.8 1
Cross references :
Wafer head hi-thread screw (EVDF - EVB DF), see page 146
Bugle head screw (EG - VMS), see page 156 - Bugle head screw (EGB), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74 - Wafer head screw (EVF - EVB), see page 142
Countersink hi-thread screw (FASTO TF 2036 DF - FASTOVIS TF 3036 DF), see page 152
Countersink screw (FASTO TF 2036 - FASTOVIS TF 3036), see page 148
Pan head screw (MULTIFAST TB SS), see page 76 - Rivets 4.8 mm, see page 193
Nails (NAILFIX), see page 237 - Peel rivets TRP, see page 192
Hole : Hole diameter
Cross references :
Wafer head hi-thread screw (EVDF - EVB DF), see page 146
Bugle head screw (EG - VMS), see page 156 - Bugle head screw (EGB), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74 - Wafer head screw (EVF - EVB), see page 142
Rivets 4.8 mm, see page 193 - Pan head screw (MULTIFAST TB SS), see page 76
Countersink hi-thread screw (FASTO TF 2036 DF - FASTOVIS TF 3036 DF), see page 152
Countersink screw (FASTO TF 2036 - FASTOVIS TF 3036), see page 148
Nails (NAILFIX), see page 237 - Peel rivets TRP, see page 192
Hole : Hole diameter
6,2 6 Countersink 3036 DF *1 - Countersink 2036 DF *2 - Countersink 3036 1 - 1000 603 493
Countersink 2036 2 - Multifast TB 1 - Rivet 4.8 1
Cross references :
Wafer head hi-thread screw (EVDF - EVB DF), see page 146
Bugle head screw (EG - VMS), see page 156 - Bugle head screw (EGB), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74 - Wafer head screw (EVF - EVB), see page 142
Countersink hi-thread screw (FASTO TF 2036 DF - FASTOVIS TF 3036 DF), see page 152
Countersink screw (FASTO TF 2036 - FASTOVIS TF 3036), see page 148
Pan head screw (MULTIFAST TB SS), see page 76 - Rivets 4.8 mm, see page 193
Nails (NAILFIX), see page 237 - Peel rivets TRP, see page 192
Hole : Hole diameter
5,6 2,5 Bugle head - Wafer - Rivet 4.8 1000 603 480
Cross references :
Wafer head hi-thread screw (EVDF - EVB DF), see page 146
Bugle head screw (EG - VMS), see page 156 - Bugle head screw (EGB), see page 157
Bi-metal bugle head screw (ISODRILL TT), see page 74 - Wafer head screw (EVF - EVB), see page 142
Rivets 4.8 mm, see page 193
Countersink hi-thread screw (FASTO TF 2036 DF - FASTOVIS TF 3036 DF), see page 152
Countersink screw (FASTO TF 2036 - FASTOVIS TF 3036), see page 148
Nails (NAILFIX), see page 237 - Pan head screw (MULTIFAST TB SS), see page 76
Peel rivets TRP, see page 192 - TAPCO TF impact anchors, see page 223
Concrete screws (BATIFAST TP), see page 181
Hole : Hole diameter
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
Advantages of ETANCOPLAST HP:
- This single screw pre-mounted system combined with the ANDYPLAST HP tting tool increases
productivity when laying waterproong on steel sheet
- Provides the breakdown of thermal bridge
- Provides non-perforation of waterproong
- Reduces screw corrosion
- Facilitates the penetration in the various complex sealing insulation
- Divided by 5 the heat transfer coefcient
- Reduces the cost of roof at equivalent thermal performance
Waterproong application:
- Thermal barrier system for fastening waterproong (Asphalt membrane) onto steel sheet roong, 0.75
or 1 mm thickness. Specially suited to high and very high humidity level buildings.
- Thanks to its drill tip, ISODRILL is also used for fastening edges onto the surrounds
Cross reference :
ANDYPLAST HP Setting tool, see page 666
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
Advantages of ETANCOPLAST HP:
- This single screw pre-mounted system combined with the ANDYPLAST HP tting tool increases
productivity when laying waterproong on steel sheet
- Provides the breakdown of thermal bridge
- Provides non-perforation of waterproong
- Reduces screw corrosion
- Facilitates the penetration in the various complex sealing insulation
- Divided by 5 the heat transfer coefcient
- Reduces the cost of roof at equivalent thermal performance
Waterproong application:
- Thermal barrier system for fastening waterproong (Asphalt membrane) onto steel sheet roong, 0.75
or 1 mm thickness.
- Thanks to its drill tip, EGB is also used for fastening edges onto the surrounds
Cross reference :
ANDYPLAST HP Setting tool, see page 666
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
Advantages of ETANCOPLAST HP:
- This single screw pre-mounted system combined with the ANDYPLAST HP tting tool increases
productivity when laying waterproong on steel sheet
- Provides the breakdown of thermal bridge
- Provides non-perforation of waterproong
- Reduces screw corrosion
- Facilitates the penetration in the various complex sealing insulation
- Divides the heat transfer factor by ve
- Reduces the cost of roof at equivalent thermal performance
Waterproong application:
- Thermal barrier system for fastening waterproong (Asphalt or synthetic membrane) onto steel sheet
roong, 0.75 or 1 mm thickness. Specially suited to high and very high humidity level buildings.
- Thanks to its drill tip, ISODRILL is also used for fastening edges onto the surrounds
Cross reference :
ANDYPLAST HP Setting tool, see page 666
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
Advantages of ETANCOPLAST HP:
- This single screw pre-mounted system combined with the ANDYPLAST HP tting tool increases
productivity when laying waterproong on steel sheet
- Provides the breakdown of thermal bridge
- Provides non-perforation of waterproong
- Reduces screw corrosion
- Facilitates the penetration in the various complex sealing insulation
- Divides the heat transfer factor by ve
- Reduces the cost of roof at equivalent thermal performance
Waterproong application:
- Thermal barrier system for fastening waterproong (Asphalt or synthetic membrane) onto steel sheet
roong, 0.75 or 1 mm thickness.
- Thanks to its drill tip, EGB is also used for fastening edges onto the surrounds
Cross reference :
ANDYPLAST HP Setting tool, see page 666
Cross reference :
ANDYPLAST HP Setting tool, see page 666
Cross reference :
ANDYPLAST HP Setting tool, see page 666
(*) Pre-drilling diameter: 5.5 or 5 mm depending on concrete support quality (perform test on-site)
Complying with ETAG 006.EOTA
Perform tests on site in case of ill-dened support and / or drilling with drill 5.5 and / or anchor <35 mm
Insulation thickness = Plastic barrel length + Screw length - Anchoring depth - 30 mm
PA: Anchoring depth into the support: 20 mm min. / 35 mm max.
H1: Pre-drilling depth = PA + 30 mm
Advantages of ETANCOPLAST HP:
- Provides the breakdown of thermal bridge
- Provides non-perforation of waterproong
- Reduces screw corrosion
- Facilitates the penetration in the various complex sealing insulation
- Divides the heat transfer factor by ve
- Reduces the cost of roof at equivalent thermal performance
Waterproong application:
- Thermal barrier system for fastening waterproong (Asphalt membrane) onto concrete support.
Cross references :
Drill bits, concrete, SDS Plus, see page 680 - Screwdriver end, Torx 30, see page 664
Power screwdrivers, see page 654
CSmaxi : Maximum Build up - CSmini : Minimum Build up - d0 : Support drilling diameter
(*) Pre-drilling diameter: 5.5 or 5 mm depending on concrete support quality (perform test on-site)
Complying with ETAG 006.EOTA
Perform tests on site in case of ill-dened support and / or drilling with drill 5.5 and / or anchor <35 mm
Insulation thickness = Plastic barrel length + Screw length - Anchoring depth - 30 mm
PA: Anchoring depth into the support: 20 mm min. / 35 mm max.
H1: Pre-drilling depth = PA + 30 mm
Advantages of ETANCOPLAST HP:
- Provides the breakdown of thermal bridge
- Provides non-perforation of waterproong
- Reduces screw corrosion
- Facilitates the penetration in the various complex sealing insulation
- Divides the heat transfer factor by ve
- Reduces the cost of roof at equivalent thermal performance
Waterproong application:
- Thermal barrier system for fastening waterproong (Asphalt or synthetic membrane) onto concrete
support.
Cross references :
Drill bits, concrete, SDS Plus, see page 680 - Screwdriver end, Torx 30, see page 664
Power screwdrivers, see page 654
CSmaxi : Maximum Build up - CSmini : Minimum Build up - d0 : Support drilling diameter
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
Advantages of ETANCOPLAST:
- Provides the breakdown of thermal bridge
- Ensures that the membrane is not pierced
- Reduces screw corrosion
Waterproong application:
- Thermal barrier system for fastening waterproong (Asphalt or synthetic membrane) onto steel sheet
roong, 0.75 or 1 mm thickness. Specially suited to high and very high humidity level buildings.
- Thanks to its drill tip, ISODRILL is also used for fastening edges onto the surrounds
Cross references :
Screwdriver end, Phillips n2, see page 664 - Power screwdrivers, see page 654
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
Advantages of ETANCOPLAST:
- Provides the breakdown of thermal bridge
- Ensures that the membrane is not pierced
- Reduces screw corrosion
Waterproong application:
- Thermal barrier system for fastening waterproong (Asphalt or synthetic membrane) onto steel sheet
roong, 0.75 or 1 mm thickness.
- Thanks to its drill tip, EGB is also used for fastening edges onto the surrounds
Cross references :
Screwdriver end, Phillips n2, see page 664 - Power screwdrivers, see page 654
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
Advantages of ETANCOPLAST:
- Provides the breakdown of thermal bridge
- Ensures that the membrane is not pierced
- Reduces screw corrosion
Waterproong application:
- Thermal barrier system for fastening waterproong (Asphalt or synthetic membrane) onto steel sheet
roong, 0.75 or 1 mm thickness. Specially suited to high and very high humidity level buildings.
- Thanks to its drill tip, ISODRILL is also used for fastening edges onto the surrounds
Cross references :
Screwdriver end, Phillips n2, see page 664 - Power screwdrivers, see page 654
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
Advantages of ETANCOPLAST:
- Provides the breakdown of thermal bridge
- Ensures that the membrane is not pierced
- Reduces screw corrosion
Waterproong application:
- Thermal barrier system for fastening waterproong (Asphalt or synthetic membrane) onto steel sheet
roong, 0.75 or 1 mm thickness
- Thanks to its drill tip, EGB is also used for fastening edges onto the surrounds
Cross references :
Screwdriver end, Phillips n2, see page 664 - Power screwdrivers, see page 654
0.8 thickness Galvanized steel plate 0.8 thickness Galvanized steel plate
+ Aluminium spacer + Aluminium spacer
+ Alu/Steel rivet + PAINTED Alu/Steel rivet
Corrosion resistance Corrosion resistance
= 15 Kesternich cycles = 15 Kesternich cycles
Complying Class 2 Ueatc Complying Class 2 Ueatc
R.E.R. 70 R.E.R. 70
NATURAL nish body PAINTED body
CS max x Rivet length Spacer length Pack. Code Pack. Code
25 4,8 x 40 23 500 275 410 500 275 411
30 4,8 x 45 28 500 275 460 500 275 461
35 4,8 x 50 33 500 275 510 500 275 511
40 4,8 x 55 38 500 275 530 500 275 531
45 4,8 x 60 43 500 275 610 500 275 611
50 4,8 x 65 48 500 275 660 500 275 661
55 4,8 x 70 53 500 275 685 500 275 686
60 4,8 x 75 58 500 275 760 500 275 761
65 4,8 x 80 63 400 275 810 400 275 811
70 4,8 x 85 68 400 275 860 400 275 861
75 4,8 x 90 73 400 275 910 400 275 911
80 4,8 x 95 78 400 275 940 400 275 941
80 4,8 x 100 78 400 275 990 400 275 991
85 4,8 x 100 83 400 275 994 400 275 995
90 4,8 x 110 88 400 276 040 400 276 041
100 4,8 x 115 98 400 276 066 400 276 067
100 4,8 x 120 98 400 276 080 400 276 081
105 4,8 x 120 103 400 276 095 400 276 096
110 4,8 x 130 108 300 276 175 300 276 176
120 4,8 x 140 118 300 276 120 300 276 121
130 4,8 x 160 128 300 276 135 300 276 136
140 4,8 x 160 138 300 276 138 300 276 141
0.8 thickness Galvanized steel plate 0.8 thickness Galvanized steel plate
+ Aluminium spacer + Aluminium spacer
+ Alu/Steel rivet + PAINTED Alu/Steel rivet
next Corrosion resistance Corrosion resistance
= 15 Kesternich cycles = 15 Kesternich cycles
Complying Class 2 Ueatc Complying Class 2 Ueatc
R.E.R. 70 R.E.R. 70
NATURAL nish body PAINTED body
CS max x Rivet length Spacer length Pack. Code Pack. Code
150 5 x 170 148 300 276 307 300 276 308
160 5 x 180 158 300 276 309 300 276 310
170 5 x 190 168 300 276 311 300 276 312
Standard colours: White (Ref. 1) - Stone grey (Ref.42) - Other colours, see page 364
Advantages of R.E.R. 70:
- Fasteners Complying with D.T.U. 43/3
- Ensures a Walk Safe surface
- Avoids crushing the insulation
- Avoids perforating the waterproof membrane
- Rivet head on the underside: Attractive and not an injury hazard
- Cannot slacken
Waterproong application:
- Pre-tted system for mechanically fastening insulation onto solid, drilled or punctured steel sheet
Cross references :
For RER 4.8 take a long length SPECIAL LR 5.05 mm drill bit, see page 668
For RER 5 take a long length SPECIAL LR 5.30 mm drill bit, see page 668
POWERBIRD cordless riveter (code 273 455), see page 674
Compressed air gun LR 83 (code 273 340), see page 676
CSmaxi : Maximum Build up
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
Standard colours: White (Ref. 1) - Stone grey (Ref.42) - Other colours, see page 364
Advantages of P.E.R. 82x40 R / AZ:
- Ensures a Walk Safe surface
- Avoids crushing the insulation
- Avoids perforating the waterproof membrane
- Reinforced 82x40 plate with very high ex resistance
- Rivet head on the underside: Attractive and not an injury hazard
- Cannot slacken
Waterproong application:
- Pre-tted system for mechanically fastening insulation onto solid, drilled or punctured steel sheet
Cross references :
For RER 4.8 take a long length SPECIAL LR 5.05 mm drill bit, see page 668
For RER 5 take a long length SPECIAL LR 5.30 mm drill bit, see page 668
POWERBIRD cordless riveter (code 273 455), see page 674
Compressed air gun LR 83 (code 273 340), see page 676
CSmaxi : Maximum Build up
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
Standard colours: White (Ref. 1) - Stone grey (Ref.42) - Other colours, see page 364
Advantages of P.E.R. 40x40 / AZ:
- Ensures a Walk Safe surface
- Avoids crushing the insulation
- Avoids perforating the waterproof membrane
- Rivet head on the underside: Attractive and not an injury hazard
- Cannot slacken
Waterproong application:
- Pre-tted Plate + Spacer + Rivet system for mechanically tting the waterproong onto a solid, drilled or punctured steel sheet
Cross references :
For RER 4.8 take a long length SPECIAL LR 5.05 mm drill bit, see page 668
For RER 5 take a long length SPECIAL LR 5.30 mm drill bit, see page 668
POWERBIRD cordless riveter (code 273 455), see page 674
Compressed air gun LR 83 (code 273 340), see page 676
CSmaxi : Maximum Build up
0.8 thickness Alu/Zinc round plate 0.8 thickness Alu/Zinc round plate
+ Aluminium spacer + Aluminium spacer
+ Alu/Steel rivet + PAINTED Alu/Steel rivet
Corrosion resistance Corrosion resistance
= 15 Kesternich cycles = 15 Kesternich cycles
Complying with ETAG 006.EOTA Complying with ETAG 006.EOTA
+ Class 2 Ueatc + Class 2 Ueatc
R.E.R. 40 / AZ R.E.R. 40 / AZ
NATURAL nish body PAINTED body
CS max x Rivet length Spacer length Pack. Code Pack. Code
25 4,8 x 40 23 500 271 025 500 271 026
30 4,8 x 45 28 500 271 030 500 271 031
35 4,8 x 50 33 500 271 035 500 271 036
40 4,8 x 55 38 500 271 040 500 271 041
45 4,8 x 60 43 500 271 045 500 271 046
50 4,8 x 65 48 500 271 050 500 271 051
55 4,8 x 70 53 500 271 055 500 271 056
60 4,8 x 75 58 500 271 060 500 271 061
65 4,8 x 80 63 500 271 065 500 271 066
70 4,8 x 85 68 500 271 070 500 271 071
75 4,8 x 90 73 500 271 075 500 271 076
80 4,8 x 95 78 500 271 080 500 271 081
85 4,8 x 100 83 500 271 085 500 271 086
90 4,8 x 110 88 500 271 090 500 271 096
100 4,8 x 120 98 500 271 100 500 271 101
110 4,8 x 140 108 500 271 110 500 271 111
120 4,8 x 140 118 500 271 120 500 271 121
130 4,8 x 160 128 500 271 130 500 271 131
continued on next page
0.8 thickness Alu/Zinc round plate 0.8 thickness Alu/Zinc round plate
+ Aluminium spacer + Aluminium spacer
+ Alu/Steel rivet + PAINTED Alu/Steel rivet
Corrosion resistance Corrosion resistance
next = 15 Kesternich cycles = 15 Kesternich cycles
Complying with ETAG 006.EOTA Complying with ETAG 006.EOTA
+ Class 2 Ueatc + Class 2 Ueatc
R.E.R. 40 / AZ R.E.R. 40 / AZ
NATURAL nish body PAINTED body
CS max x Rivet length Spacer length Pack. Code Pack. Code
150 5 x 170 148 500 271 027 500 271 028
160 5 x 180 158 500 271 032 500 271 033
170 5 x 190 168 500 271 037 500 271 038
Complying with ETAG 006.EOTA and with ATE No. 08/0239 issued by CSTB
Standard colours: White (Ref. 1) - Stone grey (Ref.42) - Other colours, see page 364
Advantages of R.E.R. 40 / AZ:
- Ensures a Walk Safe surface
- Avoids crushing the insulation
- Avoids perforating the waterproof membrane
- Rivet head on the underside: Attractive and not an injury hazard
- Cannot slacken
Waterproong application:
- Pre-tted Plate + Spacer + Rivet system for mechanically tting the waterproong onto a solid, drilled or punctured steel sheet
Cross references :
For RER 4.8 take a long length SPECIAL LR 5.05 mm drill bit, see page 668
For RER 5 take a long length SPECIAL LR 5.30 mm drill bit, see page 668
POWERBIRD cordless riveter (code 273 455), see page 674
Compressed air gun LR 83 (code 273 340), see page 676
CSmaxi : Maximum Build up
TRP assembled 70
Cross reference :
POWERBIRD cordless riveter (code 273 455), see page 674
Cross reference :
POWERBIRD cordless riveter (code 273 455), see page 674
SK-RB
Cross reference :
Special drive bit for power screwdrivers - 6 mm drive (code 358 246), see page 501
Waterproong application:
- Fitting tools for SK-RB and SK-BC anchors
6 mm
Pozidriv
Cross references :
SK-RB anchors, see page 501 - SK-RB anchors, see page 502
CSmaxi : Maximum Build up - CSmini : Minimum Build up - d : Nominal diameter - Pattern : Bit drive recess - L : Length
SK-BC
/ tx x l d0 # h1 # Pack. Code
19 19 / 0 - 20 x 70 10 13 60 250 358 260
19 / 20 - 40 x 90 10 13 60 250 358 262
19 / 40 - 60 x 110 10 13 60 250 358 264
19 / 60 - 80 x 130 10 13 60 250 358 266
19 / 80 - 100 x 150 10 13 60 250 358 268
h1 (#) With or without pre-drilling, depending on the quality of the cellular concrete. Dene hole diameter by
performing tests on-site.
Design use: Mechanically fastening a waterproong membrane onto cellular concrete - Fastening rigid
d0 insulation (polystyrene, polyurethane) onto rigid insulation.
We recommend checking the resistance of the assembly by testing on-site
For fastening asphalt waterproong in renovation projects, use SK-RB anchors, see page 501
Product denition:
tfix - Wide head 50 mm self-tapping anchor
- Screw in using a 6 mm hex. tting head
- No pre-drilling required when fastening insulation onto insulation
- No corrosion, no thermal barrier
Cross references :
Drill bit, HSS, see page 669 - Specially drive bit for power screwdriver (code 324 977), see page 501
d0# : Support drilling diameter - h1# : Support drilling depth - L : Length - tx : Maximum fastenable thickness
Outside Hole
Series Thick. Pack. Code Pack. Code
M5 12 5,48 1 200 71 275 200 71 874
M6 14 6,62 1,2 200 71 280 100 71 876
M8 18 8,62 1,5 200 71 289 100 71 870
M 10 22 10,77 2 100 71 291 100 71 878
M 12 27 13,27 2,5 100 71 293 100 71 882
M 14 30 15,27 2,5 100 71 294 100 71 884
M 16 32 17,27 3 100 71 297 100 71 885
M 18 36 19,33 3 100 71 300 100 71 995
M 20 40 21,33 3 25 71 306 100 71 998
Application:
- Anti-slackening washer
Thick. : Thickness
GROWER WASHER / SS A2
Application:
- Anti-slackening washer
CONTACT WASHER / SS A2
Cross references :
BARACO anchors / SS A4, see page 254
Cross reference :
Wood screws, SUPER WOOD TF / ZBJ, see page 35
PLASTERBOARD FIXING
BOWL WASHER - SPECIAL DRILLCO
Z 275 galvanized steel
0.8 mm thickness
CALIBEL WASHER / Ga
Cross reference :
Screw DRILLCO, see page 158
CLADDING PLATE / SS A2
Length Width No. holes Hole Thick. Shape For panel Pack. Code
75 17 3 7 1,5 L HAINAUT - HAINAUT LINE 100 604 002
75 20 3 7 1,5 L PLANEA 100 604 011
75 28 3 7 1,5 Z PROMISTYL - SANDISOL 100 604 010
75 30 3 7 1,5 L PROMISOL 2003 Bi - PROMLINE 2000 100 604 000
100 27 3 7 2 L ISOCAB 100 604 005
Cladding application:
- Invisible fastener for vertically mounted sandwich cladding panels (with hollow seal covers)
Cross references :
FASTOVIS, see page 116 - FASTOVIS WOOD, see page 123
MOUSSAVICQ ECO 20x5 sealant (code 449 733), see page 438
CLADDING PLATE / Ga
Length Width No. holes Hole Thick. For panel Pack. Code
40 15 1 7 1,5 FI 4C - PROMPLAN 500 293 410
Cladding application:
- Invisible fastener for vertically mounted sandwich cladding panels (with hollow seal covers)
Waterproong application:
- Fastens to the waterproong panel corrugation on the framework.
Cross references :
FASTOVIS, see page 116 - FASTOVIS WOOD, voir page 123
MOUSSAVICQ ECO 20x5 sealant (code 449 733), see page 438
Thick. : Thickness - Hole : Hole diameter
CLADDING PLATE / SS A2
Length width No. holes Hole Thick. For panel Pack. Code
200 30 4 7 1,5 PROMISOL 2003 Bi - PROMLINE 2000 100 604 017
Cladding application:
- Invisible fastener for horizontally mounted sandwich cladding panels (with hollow seal covers)
Cross references :
FASTOVIS, see page 116 - FASTOVIS WOOD, voir page 123
MOUSSAVICQ ECO 20x5 sealant (code 449 733), see page 438
CLADDING PLATE / Ga
Length width No. holes Hole Thick. For panel Pack. Code
200 30 4 7 1,5 PROMISOL 2003 Bi - PROMLINE 2000 100 604 015
Cladding application:
- Invisible fastener for horizontally mounted sandwich cladding panels (with hollow seal covers)
Cross references :
FASTOVIS, see page 116 - FASTOVIS WOOD, voir page 123
MOUSSAVICQ ECO 20x5 sealant (code 449 733), see page 438
Thick. : Thickness - Hole : Hole diameter
Waterproong application:
- Corrugation load spreading plate for fastening the waterproong panels onto the framework.
Cross reference :
DRILLNOX, see page 61
Waterproong application:
- Corrugation load spreading plate for fastening the waterproong panels onto the framework.
Cross references :
GOLDOVIS, see page 124 - DRILLNOX, see page 61
CHAPTER 9
515
516 517
521 522
528 528
AGRIPLAST
AGRIPLAST / TR
L : Length
AGRIFORT / 2C
AGRIFORTs advantages: Fitted using a power screwdriver with the special easy to use bit - Regular
tightening, can be removed - System highly resistant to ripping: 349 daN
Absolutely corrosion-proof head
Insulation application:
- Fastening insulation to timber frames for buildings with dynamic ventilation
Insulation
thick
Cross references :
Fixing bit (code 230 895), see page 513 - Power screwdrivers, see page 654
DRIVING BIT
Aluminium / Steel
AGRIFORT BIT
L Pack. Code
55 1 230 895
Bit for power screwdriver direct drive - Drive 1/4 (6.35 mm)
Insulation application:
- Tool for fastening insulation using AGRIFORT onto timber frames for dynamically ventilated buildings
Cross references :
AGRIFORT, see page 513 - Screwdrivers, see page 651
L : Length
Cross reference :
Cordless drill-screwdriver, see page 667
FIXAGRI 52 WASHER
Austenitic stainless steel
A2 Aisi 304
FIXAGRI 52 washer
SS A2
Washer Hole Thick. Pack. Code
52 6 6/10e 250 230 824
Insulation application:
- Fastening insulation to timber frames for rural/agricultural buildings
Cross reference :
Stainless steel wood screw, 5, see page 30
Insulation application:
- Fastening insulation to timber frames for rural/agricultural buildings
Cross reference :
Stainless steel wood screw, 5, see page 30
ISOLAGRI 52 WASHER
Austenitic stainless steel
A2 Aisi 304
ISOLAGRI 52 washer
SS A2
Washer Hole Thick. Pack. Code
52 6,1 6/10e 100 230 822
Insulation application:
- Fastening insulation to timber frames for rural/agricultural buildings
Cross reference :
Stainless steel wood screw, 5, see page 30
STYROFIX CLIP
The heel is longer than the clip spikes to make it quick and easy to position the STYROFIX CLIP in the panel
groove
Insulation application:
- Fastening high density polystyrene panels (with or without grooves) on a metal or timber framework
under the roof
Cross reference :
EVB, self-drilling carbon steel screw (code 309 860), see page 144
STYROFIX STAPLE
th
Wid Insulation application:
- Fits STYROFIX CLIP for tting suspended ceiling rails
Cross reference :
STYROFIX CLIP, see page 515
ROCKAFIX HANGER
Pack. Code
100 260 730
Insulation application:
- Patented ROCKAFIX system: Fastening Rockwool insulation on a metal or timber framework under the
roof. Extension fastening hanger used for refurbishing work (irregular underroofs).
Cross references :
Tab Clip, see page 516 - Bracket (code 260 790), see page 516 - DRILLCO screws, see page 158
TAB CLIP
Galvanized steel Z 275
1 mm thickness
Z TAB CLIP
ROCKAFIX
Height Rockmur thick. Rockplus thick. Pack. Code
55 60 60 100 260 740
70 75 70 / 75 100 260 750
90 100 90 / 100 100 260 760
110 120 110 100 260 770
Insulation
thick
Insulation application:
- Patented ROCKAFIX system: Fastening Rockwool insulation onto a metal or timber framework under
the roof. Fastening hook for insulation panels: ROCKMUR Kraft 201.116 - ROCKMUR Alu 201.216
- ROCKPLUS Kraft 220.116.
Cross references :
Bracket (code 260 790), see page 516 - Hanger (code 260 730), see page 516
DRILLCO screws, see page 158
BRACKET
ROCKAFIX BRACKET
Pack. Code
100 260 790
Insulation application:
- ROCKAFIX patented system: Fastening Rockwool insulation onto a metal or timber framework under
the roof. Bracket holder for attaching the metal prole.
Cross references :
Tab Clip, see page 516 - Threaded rod 6 (code 174 500), see page 290
DRILLCO screws, see page 158
THERMOFIX HANGER
L Pack. Code
300 100 260 810
THERMOFIX is specially designed to ensure good continuous insulation while retaining good roof ventilation.
Very easy to t. The underside comprises 174 mm fold back tabs for temporarily holding the insulation without
the need for nails or additional steps. Allows sideways sliding of the fork saddle into one of these tabs.
Retains the insulation.
Insulation application:
- Patented THERMOFIX system: Fastening rolled insulation onto a timber frame under the roof. The end
of the hanger can be used to t metal proles.
Cross references :
THERMOFIX saddle (code 260 820), see page 517 - DRILLCO screws, see page 158
SADDLE WASHER
Galvanized steel Z 275
0.8 mm thickness
THERMOFIX
SADDLE WASHER
Section Pack. Code
75 x 75 100 260 820
THERMOFIX is specially designed to ensure good continuous insulation while retaining good roof ventilation.
Very easy to t. The underside comprises 174 mm fold back tabs for temporarily holding the insulation without
the need for nails or additional steps. Allows sideways sliding of the fork saddle into one of these tabs.
Retains the insulation.
Insulation application:
- Patented THERMOFIX system: Fastening rolled insulation onto a timber frame under the roof. The end
of the hanger can be used to t metal proles.
Cross references :
THERMOFIX hanger (code 260 810), see page 517 - DRILLCO screws, see page 158
L : Length
PRESPIN type O
PRESPIN type N
- A 50 x 50 mm steel base covered on one side with a double sided vinyl foam adhesive protected by a
peal-off film + A 2.7 mm dia. rod riveted to the base + A metal compression clip.
Fitting: Clean the support and apply by pressing the Prespin down very firmly
Insulation application:
- Insulation is prepositioned by the built-in adhesive on clean and smooth supports
Cross references :
Retaining Clip (code 358 450), see page 519 - Protective cap (code 402 000), see page 519
COMPRESSION CLIP
Spring steel
Bag Code
500 358 455
Insulation application:
- Retaining and protection clip that fits on the PRESPIN rod
Cross references :
PRESPIN type O, see page 518 - PRESPIN type N, see page 518
White Plastic
Case Code
500 358 450
Insulation application:
- Retaining and protection clip that ts on the PRESPIN rod
Cross references :
PRESPIN type O, see page 518 - PRESPIN type N, see page 518
POINCO P
Application:
- Plastic protection cap for the PRESPIN rod tip
L : Length
GRIFCO CLIPS / A
Insulation application:
- Fastening suspended ceilings on steel supports
GRIFCO CLIPS / B
GRIFCO / R
RAPCO
Wire (mm) Min. height (cm) Max. height (cm) Pack. Code
Adjustable 4 18 30 100 269 400
height 4 30 60 100 269 403
4 60 100 100 269 406
4 80 150 100 269 409
4 110 200 100 269 412
Cross references :
SPLITUB (code 218 872) or SPLITCOF (code 218 870) anchors, see page 239
GRIFCO / R, see page 520
HOOKED ROD
Carbon steel wire
Cross reference :
Spring only (codes 269 440 or 269 438), see page 522
SMOOTH ROD
Carbon steel wire
Cross reference :
Spring only (codes 269 440 or 269 438), see page 522
SPRING ALONE
Stainless steel Carbon steel
Cross references :
Hook rod, see page 521 - Smooth rod (code 269 430), see page 521
1/2 CLAMP / Ga
Cross references :
Threaded rod 6 mm (code 174 500), see page 290 - Rockax bracket (code 260 790), see page 516
Cross references :
BRASS anchor (code 358 085), see page 242 - FRAPCO impact anchors, see page 253
Nuts, see page 292
HEXAGONAL SLEEVE
Cross reference :
Threaded rod 6 mm (code 174 500), see page 290
CYLINDRICAL SLEEVE
Out M x L Pitch Ext. Pack. Code
6 x 20 100 8 100 170 905
8 x 30 125 10 100 170 910
Cross references :
Threaded rod 6 mm (code 174 500), see page 290
Threaded rod 8 mm (code 174 510), see page 290
SOUPLAF
Cross reference :
TAPCO impact anchor 5 (code 359 899), see page 222
SCALE BOLT
Galvanized steel
SCALE BOLT / Ga
Cross reference :
Threaded rod 6 mm (code 174 500), see page 290
EYE BOLT
Carbon steel white coating
EYE BOLT / Zn
M x L Pack. Code
6 x 60 50 359 234
Cross references :
Scale bolts, see page 524 - BRASS anchor M6 x 24 (code 358 085), see page 242
Cross reference :
Threaded rod 6 mm (code 174 500), see page 290
Cross references :
Hexagonal sleeve (code 170 900), see page 291 - Threaded rod 6 mm (code 174 500), see page 290
Concrete
35
PA
Insul. Insulation
thick
Framework
SPIR-ECO
CSTB Report No. RS 11-116/A. Conclusions: For a re resistance duration of four hours, SPIR-ECO springs can be used to fasten Rockfeu formwork, in 50
and 140 mm thicknesses.
Insulation application:
- Fastening Rockwool oor panel insulation for the back of formwork.
SPIR-ECO TOOL
Carbon steel
SPIRAL
L Pack. Code
45 250 239 970
Insulation application:
- Fastening timber/cement bre panel insulation for the back of formwork
Anchoring: 50 mm in concrete
Insulation application:
- Fastening timber/cement bre panel insulation for the back of formwork
Red plastic
PROTECTION CAP / PA
Pack. Code
100 218 840
Insulation application:
- Metallic barbed protector
EXPANDED METAL
2,5
meters Finish tting application:
- Plaster corner edging
L : Length
CHAPTER 10
Roofing or cladding
538 to 540
Roofing or cladding
545
548
546 547 550
546
549 549
551 555
556
552 to 555
What is OVER-ROOFING ?
Over-roofing comprises placing a new roof (for example steel sheet) on your existing roof (fibre-cement, tile, galvanized corrugated
sheet, concrete, galvanized sheet, aluminium, sandwich panel...)
MODULCO MODULTOG
SURC
RE
QUESTIONNAIRE
SURC
URE
QUESTIONNAIRE
TU
OU
OU VER
T
VER
QUESTIONS RELATIVES AU BTIMENT EXISTANT EN VUE DU CALCUL DCARTEMENT
QUESTIONS RELATIVES AU BTIMENT EXISTANT EN VUE DU CALCUL DCARTEMENT
DES ENTRETOISES MODULTOG
DES ENTRETOISES MODULCO
AFFAIRE : AFFAIRE :
Adresse du chantier : Adresse du chantier :
Btiment : ouvert ferm
Btiment : ouvert ferm
Rgion vent : l ll lll lV V
Rgion vent : l ll lll lV V
Proximit du littoral - 3 km entre 3 et 6 km + 6 km H
Site : protg normal expos Proximit du littoral - 3 km entre 3 et 6 km + 6 km H
h
Site : protg normal expos
Altitude : m h
177 Ep. 18
PAS
ou 51 Nombre de versants identiques
MODUL V
SURC
URE
QUESTIONNAIRE OU
T
VER
AFFAIRE :
Adresse du chantier :
Btiment : ouvert ferm
Rgion vent : l ll lll lV V
Proximit du littoral - 3 km entre 3 et 6 km + 6 km H
Site : protg normal expos
h
Altitude : m
Rgion neige : A1 A2 B1 B2 C1 C2 D E
H = hauteur au fatage m
h = hauteur l'gout m l
L
l = demi largeur btiment m
L = longueur du btiment m
PAS Ep.
Type de Modul V
Hauteur de Modul V 60 120 160 170
Type de couverture
Bac acier paisseur
Bac alu mm Poids de la couverture (kg/m2)
Fibres-ciment
Autre, prciser :
MODULECO A
Cross references :
Anchoring ange (code 369 606), see page 537 - ZED purline (code 369 250), see page 547
GOLDOVIS (code 331 200), see page 548
MODULECO B
Cross references :
Anchoring ange (code 369 606), see page 537 - WINGTEKS (code 288 730), see page 549
Cross references :
MODULECO A spacer (code 369 607), see page 536
MODULECO B spacer (code 369 608), see page 536
MODULCO A
Cross references :
Compression stools, see page 542 - Compensation wedge (code 369 020), see page 542
Suction nozzle (code 339 090), see page 542 - GOLDOVIS 6 / 6.3 x 25 (code 331 205), see page 546
GOLDOVIS 15 / 6 x 35 (code 331 100), see page 546
GOLDOVIS 15 / 6 x 55 (code 331 110), see page 546
GOLDOFAST WOOD 6.5 x 70 (code 331 471), see page 546 - Zed purlin (code 369 250), see page 547
GOLDOVIS 6 / 6.3 x 22 (code 331 200), see page 548
MODULCO B
Cross references :
Compression stools, see page 542 - Compensation wedge (code 369 020), see page 542
Suction nozzle (code 339 090), see page 542 - GOLDOVIS 6 / 6.3 x 25 (code 331 205), see page 546
GOLDOVIS 15 / 6 x 35 (code 331 100), see page 546
GOLDOVIS 15 / 6 x 55 (code 331 110), see page 546
GOLDOFAST WOOD 6.5 x 70 (code 331 471), see page 546
WINGTEKS 6.3 x 90 (code 288 720), see page 549 - WINGTEKS 6.3 x 110 (code 288 730), see page 549
MODULCO FLAT
Design and quote provided free of charge (with fastener loading and quantity calculations provided by our
Technical Department based on your readings)
Advantages:
- Saves the cost of dismantling your existing roong
- No need to stop using the building during the work
- Makes it possible to add insulation
- Flexible system used with Zed purlins or timber rafters
- Very easy to use
OVER-ROOFING application:
- MODULCO FLAT over-roong systems places a new roof (steel sheet type) over your existing roof
(bre-cement, tile, steel sheet, aluminium) with secondary timber or steel perpendicular rafters
OVER-CLADDING application:
- MODULCO FLAT over-cladding system adds a new (steel sheet type) cladding over your existing
cladding (bre-cement, steel sheet, aluminium type, etc.) with timber or steel secondary purlins.
Cross references :
Compression stools, see page 542 - Compensation wedge (code 369 020), see page 542
Suction nozzle (code 339 090), see page 542 - GOLDOVIS 6 / 6.3 x 25 (code 331 205), see page 546
GOLDOVIS 15 / 6 x 35 (code 331 100), see page 546
GOLDOVIS 15 / 6 x 55 (code 331 110), see page 546
GOLDOFAST WOOD 6.5 x 70 (code 331 471), see page 546 - Zed purlin (code 369 250), see page 547
GOLDOVIS 6 / 6,3 x 22 (code 331 200), see page 548
WINGTEKS 6.3 x 90 (code 288 720), see page 549 - WINGTEKS 6.3 x 110 (code 288 730), see page 549
MODUL.MAX FLAT
Advantages:
- Saves the cost of dismantling your existing roong
- No need to stop using the building during the work
- Makes it possible to add insulation
- Flexible system used with Zed purlins or timber rafters
- Very easy to use
OVER-ROOFING application:
- MODUL.MAX over-roong system, places a new roof (steel sheet type) over your existing roof
(SUPERONDE or MAXIPLAQUE bre-cement type) with steel or timber secondary frames
Cross references :
Compression stools, see page 542 - Compensation wedge (code 369 020), see page 542
Suction nozzle (code 339 090), see page 542 - GOLDOVIS 15 / 6 x 55 (code 331 110), see page 546
GOLDOFAST WOOD 6.5 x 70 (code 331 471), see page 546 - Zed purlin (code 369 250), see page 547
GOLDOVIS 6 / 6.3 x 25 (code 331 205), see page 546
WINGTEKS 6.3 x 90 (code 288 720), see page 549 - WINGTEKS 6.3 x 110 (code 288 730), see page 549
MODULCO SPACER
Cross references :
Drill bit, carbide tip, 14 mm (code 284 895), see page 671
Suction nozzle (code 339 090), see page 542 - Compensation wedge (code 369 020), see page 542
MODULCO WEDGE
Cross references :
Drill bit, carbide tip, 14 mm (code 284 895), see page 671
Suction nozzle (code 339 090), see page 542 - Compression spacers, see page 542
SUCTION NOZZLE
Pack. Code
339090 339 090
Renovating deep corrugation bre-cement 177x51 type panels generates asbestos-cement dust and requires
precautionary measures
OVER-ROOFING and OVER-CLADDING applications:
- Nozzle for sucking up asbestos-cement dust (vacuum not included)
MODULTOG A
Design and quote provided free of charge (with fastener loading and quantity calculations provided by our
Technical Department based on your readings)
Advantages:
- Saves the cost of dismantling your existing roong
- No need to stop using the building during the work
- Makes it possible to add insulation
- Very easy to use
OVER-ROOFING application:
- MODULTOG over-roong system for laying a new (steel sheet type) roof over your existing roof (small
corrugation 76 x 18 steel sheets) using Steel secondary frames
OVER-CLADDING application:
- MODULCO cladding renovation system for laying a new (steel sheet type) cladding over your existing
cladding (small corrugation 76 x 18 steel sheets) using Steel secondary frames
Cross references :
GOLDOVIS 6 / 6.3 x 25 (code 331 205), see page 546
GOLDOVIS 15 / 6 x 35 (code 331 100), see page 546
GOLDOFAST WOOD 6.5 x 70 (code 331 471), see page 546 - Zed purlin (code 369 250), see page 547
GOLDOVIS 6 / 6.3 x 22 (code 331 200), see page 548
MODULTOG B
Design and quote provided free of charge (with fastener loading and quantity calculations provided by our
Technical Department based on your readings)
Advantages:
- Saves the cost of dismantling your existing roong
- No need to stop using the building during the work
- Makes it possible to add insulation
- Very easy to use
OVER-ROOFING application:
- MODULTOG over-roong system for laying a new (steel sheet type) roof over your existing roof (small
corrugation 76 x 18 steel sheets) using Timber secondary frames
OVER-CLADDING application:
- MODULCO cladding renovation system for laying a new (steel sheet type) cladding over your existing
cladding (small corrugation 76 x 18 steel sheets) using Timber secondary frames
Cross references :
GOLDOVIS 6 / 6.3 x 25 (code 331 205), see page 546
GOLDOVIS 15 / 6 x 35 (code 331 100), see page 546
GOLDOFAST WOOD 6.5 x 70 (code 331 471), see page 546
WINGTEKS 6.3 x 90 (code 288 720), see page 549 - WINGTEKS 6.3 x 110 (code 288 730), see page 549
MODULTOG FLAT
Design and quote provided free of charge (with fastener loading and quantity calculations provided by our
Technical Department based on your readings)
Advantages:
- Saves the cost of dismantling your existing roong
- No need to stop using the building during the work
- Makes it possible to add insulation
- Flexible system used with Zed purlins or timber rafters
- Very easy to use
OVER-ROOFING application:
- MODULTOG FLAT over-roong system for laying a new (steel sheet type) roof over your existing roof
(small corrugation 76 x 18 steel sheets) using Timber or Steel perpendicular secondary frames
OVER-CLADDING application:
- MODULTOG FLAT cladding renovation system for laying a new (steel sheet type) cladding over your
existing cladding (small corrugation 76 x 18 steel sheets) using Timber or Steel perpendicular
secondary frames
Cross references :
GOLDOVIS 6 / 6.3 x 25 (code 331 205), see page 546
GOLDOVIS 15 / 6 x 35 (code 331 100), see page 546
GOLDOFAST WOOD 6.5 x 70 (code 331 471), see page 546 - Zed purlin (code 369 250), see page 547
GOLDOVIS 6 / 6.3 x 22 (code 331 200), see page 548
WINGTEKS 6.3 x 90 (code 288 720), see page 549 - WINGTEKS 6.3 x 110 (code 288 730), see page 549
MODUL V
Cross references :
GOLDOVIS 6 / 6.3 x 25 (code 331 205), see page 546
GOLDOVIS 15 / 6 x 35 (code 331 100), see page 546
GOLDOFAST WOOD 6.5 x 70 (code 331 471), see page 546 - Zed purlin (code 369 250), see page 547
GOLDOVIS 6 / 6.3 x 22 (code 331 200), see page 548
GOLDOVIS 6 / Zn
CP x L H Pack. Code
2 to 6 6,3 x 25 10 100 331 205
Cross references :
Nut setter TH 10 (code 323 510), see page 660 - Power screwdrivers, see page 654
GOLDOVIS 15 / ZBJ
CP x L H Pack. Code
4 to 15 6 x 35 10 500 331 100
4 to 15 6 x 55 10 500 331 110
Cross references :
Nut setter TH 10 (code 323 510), see page 660 - Power screwdrivers, see page 654
Suction nozzle (code 339 090), see page 542
GOLDOFAST WOOD / 2C
x L H Pack. Code
6,5 x 70 10 500 331 471
Cross references :
Nut setter TH 10 (code 323 510), see page 660 - Power screwdrivers, see page 654
Suction nozzle (code 339 090), see page 542
CP : Drilling capacity into steel (minimum / maximum) - H : Hex. drive - L : Length
ZED PURLIN
Cross reference :
GOLDOVIS 6 / 6.3 x 22 (code 331 200), see page 548
ZED - CLIP
Cross reference :
GOLDOVIS 6 / 6.3 x 22 (code 331 200), see page 548
ZED - JOIST
Cross references :
GOLDOVIS 6 / 6.3 x 22 (code 331 200), see page 548 - Stove bolt 8 x 16 (code 55 580), see page 548
GOLDOVIS 6 / ZBJ
CP x L H Pack. Code
2 to 6 6,3 x 22 10 500 331 200
Cross references :
Zed purlin (code 369 250), see page 547 - Clip (code 369 240), see page 547
Nut setter TH 10 (code 323 510), see page 660 - Power screwdrivers, see page 654
STOVE BOLT / Zn
WINGTEKS TF / Zn
Cross references :
Magnetic bit holder (code 323 105), see page 663 - Drive bit, Pozidriv No. 3 (code 325 030), see page 663
Power screwdrivers, see page 654
PLATE - WOOD
Cross reference :
EVF / 2C 4.8 x 40 (code 309 930), see page 550
CAmaxi : Maximum assembly capacity - CP : Drilling capacity into steel (minimum / maximum) - Pattern : Bit drive recess - L : Length
EVF / 2C
Cross references :
Drive bit, Phillips No. 2 (code 324 990), see page 664 - Power screwdrivers, see page 654
Cross reference :
EVF / 2C 4.8 x 40 (code 309 930), see page 550
A MODULSOL
The MODULSOL is design to receive many heights and prols types: extruded aluminium prol, square tube
shaped, L or T prol
MODULSOL is usable for trapezoidal prole height between 39 to 45 mm
In case on trapezoidal prole height 39 or 40 mm, you must wedge the MODULSOL A or B type with a
polypropylene block
Advantages:
B
- MODULSOL roof connector usable on timber and purling
- On steel sheet or aluminium sheet
- Roong application on new build or renovation project
- MODULSOL waterproof system
- No mechanical load on steel sheet
- MODULSOL manufactured in stainless steel
- Universal connector for many framework
- ETANCOs technical datas
- User guide
- Easy to t
PHOTOVOLTAIC application:
- The MODULSOL is a connector to elevate a framework between solar panel and roong sheets for
photovoltaic systems
Cross references :
ZACROR, see page 171 - Polypropylene block, see page 551
BLOCK / PP
ETASOL A * - Sheet / SS A2
Cross references :
VULCO saddles, see page 375 - 5 mm Allen head, see page 664
ETASOL B * - Sheet / SS A2
Cross references :
VULCO saddles, see page 375 - 5 mm Allen head, see page 664
ETASOL A - FC / SS A2
Cross references :
5 mm Allen head, see page 664
ETASOL B - FC / SS A2
Cross references :
5 mm Allen head, see page 664
ETASOL A - STSM / SS A2
M x L Metric thread len. Wood thread len. Allen head Pack. Code
10 x 200 110 70 7 25 346 110
10 x 250 130 80 7 25 346 112
10 x 300 140 100 7 25 346 114
HEX. NUT WITH TOOTHED BASE (DIN 6923) FOR THREADED ROD
Austenitic stainless steel
A2 Aisi 304
NUT TOOTHED BASE
Din 6923 / SS A2
M Pitch H Pack. Code
8 125 13 100 170 635
10 150 15 100 170 634
12 175 18 100 170 638
ETASOL A - STS / SS A2
M x L Metric thread len. Wood thread len. Allen head Pack. Code
10 x 200 110 70 7 50 346 090
10 x 250 130 80 7 50 346 092
10 x 300 140 100 7 50 346 094
Pre-drilling: 0.7 x
Anchoring depth: 4 to 12 x
SOLAR PANEL Application:
- Ready assembled system for prole mounting (solar cells) on roong mounted on a timber framework
Cross references :
ETASOL nut, see page 554 - ETASOL plate, see page 556
SAFETY SCREW
METAL SCREW - TAMPER PROOF HEAD - METRIC THREAD PITCH
Austenitic stainless steel
A2 Aisi 304
ETASOLR SCREW
SS A2
M x L Lf Pack. Code
8 x 20 20 100 345 520
8 x 25 25 100 345 525
8 x 30 30 100 345 530
8 x 35 22 100 345 535
8 x 40 22 100 345 540
8 x 45 22 100 345 545
8 x 50 22 50 345 550
8 x 55 22 50 345 555
8 x 60 22 50 345 560
8 x 65 22 50 345 565
8 x 70 22 50 345 570
Cross reference :
Monoblock drive insert for ETASOLR bolt, see page 661
THREADED PLATE / SS A2
ETASOL PLATE
Austenitic stainless steel
A2 Aisi 304
ETASOL PLATE / SS A2
82 40 11 5 25 346 144
82 40 13 5 25 346 146
Cross reference :
ETASOL screw, see page 555
CHAPTER 11
571 572
SECURIT-LINE T2 SW
SECURIT-LINE T2 TOG
575
SECURIT-LINE T3 FIBRO
576
577 to 579
580 581
582 583
For SHALLOW
For SANDWICH
CORRUGATION
PANEL ROOFING
76x18 ROOFING
584 585
RENOV-SECURIT T3 FIBRO
For FIBRE-CEMENT
ROOFING DEEP
CORRUGATION
177x51
ASBESTOS FREE
586
587
STEEL SHEET or
SLATE PANEL
FIBRE-CEMENT
or TILE
SHEETING
588 589
TILE
590
Our solutions:
Collective safety:
An aluminium range of permanent LR SAUVGUARD guardrails for inaccessible roofs terraces.
These are located around the roof terrace and are the ideal solution for preventing falls.
28 uprights
60 counterweights
6 fixed 90 angles
2 finish caps
Individual safety:
SECURIT-LINE permanent lifelines let you move around in complete safety on industrial roofs made from steel sheet,
sandwich panels, corrugated or bre-cement sheet.
Used with a suitable fall arresting system, lifelines restrict an operator to a given working area while assuring them that should
they fall, the consequences of the fall will be limited.
RENOV-SECURIT individual anchoring systems, A1 Plate, BODYGUARD and QUICK-SECURIT are used to restrict
users to a working area to avoid any risk of falling off. Furthermore, they ensure that when using a suitable fall arresting
system, the consequences of any sudden fall from a height are limited.
Hooks for SECURIT 2005 roofers ladder allow access to traditional roofs while securing workers.
Standards:
NF E85-015 : Industrial installation elements, permanent means of access: Stairways, ladders with steps and
guardrails .
This standard sets out characteristics relating to the design and the main dimensions of guardrails on roof terrace.
EN ISO 14122-3 : Safety of machinery - Permanent means of accessing to machinery - Part 3: Stairs, step ladders
and guardrails .
This document denes the safety prescriptions applicable to means of access that permanently on machines.
LR SAUVGUARD
1/3
ATC ADV
Adresse
1100 mm
1100 mm
B Bton B
C C
Etanchit Acier Etanchit
Support
Bton Bton
Fixation sur Faade Extrieure Autre : Fixation sur Face Intrieure de l'acrotre
LR ZedFix-Acier LR TopFix-B
Structure A
Cte A
1100 mm
C B Cte B (mm)
Etanchit B
A C
Cte C (mm)
Etanchit
Bton
Fixation sous couvertine Fixation sur acrotre
LR Ballast LR ZedFix-Bton
A
1100 mm
1100 mm
A B
Etanchit
Bton Bton
Auto-Portant Etanchit Fixation sous couvertine
Informations sur les finitions : Notez la quantit pour chaque finition ou cochez (Garde corps ferm)
Afin de pouvoir raliser votre offre de prix ou votre tude, Parc les Erables - Bt. 1
66 route de Sartrouville - BP 49
veuillez nous fournir un plan, un croquis ou un schma cot de la toiture scuriser. 78 231 LE PECQ CEDEX (France)
Sans plan de btiment cot, cette offre n'est qu'une enveloppe de prix Tl. : 01 34 80 52 00 - Fax : 01 30 71 01 89
et pourra tre modifie avant le chantier. www.etanco.eu
SECURIT-LINE : Lifeline
QUESTIONNAIRE
ADV : ATC :
AFFAIRE
Mr / Mme :
Socit :
Chantier : Date du chantier :
Adresse :
Tl. : Fax. : E-mail. :
RENSEIGNEMENT
Couverture Type
Bac sec
Epaisseur mm
Panneau sandwich
PAS
Tle ondule Galvanise PO 76 x 18 Pas mm
Plaque fibres-ciment GO 177 x 51
Nombre de pannes par versant
Charpente
Pannes mtallique
Epaisseur mm
V1
Autre, prciser V2
Espacement
entre les pannes
m
Versant 1 Versant 2
139
113
Cross references :
CHIMFORT ATE (code 344 791), see page 268
Threaded rod, STANDARD M10 x 130 stainless steel (code 340 062), see page 263
BARACO FM 753 M10/20x90 Stainless steel (code 344 245), see page 254
Flat washer, Stainless steel L10 (code 71 924), see page 503
Metal screws, Stainless steel M10, see page 307
Upright, Aluminium, 50x30 (code depends on length), see page 567
Baseboard (code 180 165), see page 569 - Fitting kit LR SAUVGUARD (code 180 460), see page 569
Power screwdrivers, see page 654
Join for rail and under rail / PA06 Aluminium grey 1 180 135
Join for rail and under rail / PA06 Other colours * 1 180 136
Cross references :
Foot LR TOPFIX / LR FACFIX (code 180 100), see page 566
Foot LR ZEDFIX (code 180 110), see page 566 - Foot LR BALLAST (code 180 104), see page 566
Counterweight support 50x30x1080 (code 180 185), see page 568
Counterweight support 50x30x1160 (code 180 188), see page 568
Baseboard (code 180 165), see page 569 - Fitting kit LR SAUVGUARD (code 180 460), see page 569
Power screwdrivers, see page 654
Cross references :
Foot LR BALLAST (code 180 104), see page 566 - Rail support (code 180 121), see page 567
Under rail support (code 180 123), see page 567
Bag of 50 screws, Stainless steel, TH8 5.5x75 (code 376 481), see page 567
Fitting kit LR SAUVGUARD (code 180 460), see page 569 - Power screwdrivers, see page 654
Cross references :
Foot LR TOPFIX / LR FACFIX (code 180 100), see page 566
Foot LR BALLAST (code 180 104), see page 566
Upright, Aluminium, 50x30 (code depends on length), see page 567
Fitting kit LR SAUVGUARD (code 180 460), see page 569 - Power screwdrivers, see page 654
FITTING KIT
LR SAUVGUARD
FITTING KIT
Pack. Code
1 180 460
Kit comprising:
- 1 Half decameter ruler
- 1 write anywhere wood pencil
- 1 pipe cutter
- 1 TH8 monoblock socket - Lg. 65 mm
- 1 Monoblock hex head 5 mm end
- 1 Allen wrench 5 mm
- 1 Carry case
Cross reference :
Power screwdrivers, see page 654
Colour matches
RAL Rf. ETANCO RAL Rf. ETANCO RAL Rf. ETANCO
RAL 1000 105 RAL 5012 206 RAL 7032 38
RAL 1001 204 RAL 5013 280 RAL 7033 234
RAL 1002 60 RAL 5014 103 RAL 7034 289
RAL 1003 193 RAL 5015 37 RAL 7035 158
RAL 1005 375 RAL 5017 183 RAL 7036 195
RAL 1012 260 RAL 5018 21 RAL 7037 321
RAL 1013 187 RAL 5019 137 RAL 7038 157
RAL 1014 106 RAL 5020 430 RAL 7040 361
RAL 1015 14 RAL 5022 225 RAL 7043 447
RAL 1016 186 RAL 5023 449 RAL 7044 443
RAL 1018 63 RAL 5024 240 RAL 7046 569
RAL 1019 27 RAL 6000 258 RAL 7048 638
RAL 1020 124 RAL 6001 267 RAL 8000 57
RAL 1021 423 RAL 6003 101 RAL 8002 259
RAL 1023 149 RAL 6004 245 RAL 8003 500
RAL 1027 15 RAL 6005 31 RAL 8004 208
RAL 1028 90 RAL 6007 140 RAL 8008 69
RAL 1034 243 RAL 6009 82 RAL 8011 74
RAL 2000 650 RAL 6011 40 RAL 8012 54
RAL 2001 24 RAL 6013 150 RAL 8014 68
RAL 2002 115 RAL 6014 73 RAL 8015 241
RAL 2004 257 RAL 6015 255 RAL 8019 156
RAL 2008 65 RAL 6016 398 RAL 8024 51
RAL 2010 9 RAL 6019 13 RAL 9001 235
RAL 2011 291 RAL 6021 55 RAL 9002 42
RAL 2012 538 RAL 6024 116 RAL 9003 339
RAL 3000 23 RAL 6026 123 RAL 9005 70
RAL 3003 19 RAL 6027 45 RAL 9006 10
RAL 3004 178 RAL 6028 131 RAL 9007 276
RAL 3005 117 RAL 6033 338 RAL 9010 1
RAL 3007 299 RAL 6034 442 RAL 9016 262
RAL 3009 87 RAL 7000 136 RAL 9018 121
RAL 3011 312 RAL 7001 198
RAL 3012 129 RAL 7002 78
RAL 3013 351 RAL 7004 400
RAL 3014 244 RAL 7005 102
RAL 3016 279 RAL 7006 64
RAL 3018 382 RAL 7008 264
RAL 3022 242 RAL 7010 700
RAL 3031 326 RAL 7012 196
RAL 4001 377 RAL 7015 221
RAL 4004 362 RAL 7016 236
RAL 4006 595 RAL 7021 343
RAL 5002 133 RAL 7022 20
RAL 5007 122 RAL 7023 322
RAL 5008 8 RAL 7024 233
RAL 5009 61 RAL 7026 448
RAL 5010 75 RAL 7030 7
RAL 5011 337 RAL 7031 85
(*) Fully painted part (building quality baked): all RAL colours
End part set comprising:
- 1 A4 stainless steel end (160x55x124.5 mm) + 1 EPDM expansion joint (160x50x5 mm) with 12 9 mm
holes
Intermediate part set comprising:
- 1 A4 stainless steel intermediate anchoring part (160x55x130 mm) + 1 EPDM expansion joint
(160x50x5 mm) with 12 9 mm holes
Advantages of SECURIT-LINE T2 BAC:
- Covered by QUALICONSULT No. 0712002ETN712 new technology survey
- Complying with standard NF EN 795 Class C
- Building quality painting stove hardened - Colour chart, see page 364
- Without cutting the metal sheet roong
- For even more plus factors, refer to our Safety booklet
INDIVIDUAL SAFETY application for ROOFING:
- Lifeline for metal panel roong. Fits to the bottom sheet (min. width 165 mm) along the metal purlines
with a 3 mm min. thickness, for new build or renovation projects
- Always use with individual protection equipment (NF EN 363)
- Approved for use by two people simultaneously
- Technical study must be performed by the Safety design department
- Do not use as a hanging, lifting or handing point
Cross references :
DRILLNOX 3.5 PI : 5.5x38, see page 61 - DRILLNOX 12 : 5.5x62, see page 62
Cable (code 170 109), see page 578 - Shock absorber (code 170 106), see page 577
Sag compensator (code 170 229), see page 577 - Bent end part (code 170 104), see page 577
Tensioner (code 170 107), see page 578 - Cable clamp kit (code 170 108), see page 578
Rating plate (code 170 110), see page 579 - LR SIL 402 translucent sealant (code 492 100), see page 452
Power screwdrivers, see page 654
(*) Fully painted part (building quality baked): all RAL colours
End part set comprising:
- An A4 stainless steel omega anchoring part (240x150x71 mm) + 2 EPDM expansion joints (150x50x5
mm) with six 9 mm holes + 1 A4 stainless steel bent end + 2 M12 A4 stainless steel bent end parts +
2 A4 stainless steel bolts + 2 A4 stainless steel locknuts - Not tted
Intermediate part set comprising:
- An A4 stainless steel omega anchoring part (240x150x71 mm) + 2 EPDM expansion joints (150x50x5
mm) with six 9 mm holes + 2 A4 stainless steel intermediate anchoring points + 4 M12 A4 stainless
steel bolts + 4 A4 stainless steel locknuts - Not tted
Pulley wheel set comprising:
- An A4 stainless steel omega anchoring part (240x150x71 mm) + 2 EPDM expansion joints (150x50x5
mm) with six 9 mm holes + 1 A4 stainless steel pully wheel (1 ange + 1 wahser) + 1 M12 A4
stainless steel bolt + 1 A4 stainless steel lock nut - Not tted
Advantages of SECURIT-LINE T3 BAC:
- Covered by QUALICONSULT No. 0712004001 new technology survey
- Complying with standard NF EN 795 Class C
- Building quality painting stove hardened - Colour chart, see page 364
- Without cutting the metal sheet roong
- For even more plus factors, refer to our Safety booklet
INDIVIDUAL SAFETY application for ROOFING:
- Lifeline for metal panel roong. Fits to the bottom sheet (min. width 165 mm) along the metal purlines
with a 3 mm min. thickness, for new build or renovation projects
- Always use with individual protection equipment (NF EN 363)
- Approved for use by two people simultaneously
- Technical study must be performed by the Safety design department
- Do not use as a hanging, lifting or handing point
Cross references :
DRILLNOX 3.5 PI : 5.5x50, see page 61 - DRILLNOX 12 : 5.5x62, see page 62
Cable (code 170 109), see page 578 - Shock absorber (code 170 106), see page 577
Sag compensator (code 170229), see page 577 - Tensioner (code 170 107), see page 578
Cable clamp kit (code 170 108), see page 578 - Rating plate (code 170 110), see page 579
LR SIL 402 translucent sealant (code 492 100), see page 452 - Power screwdrivers, see page 654
(*) Fully painted part (building quality baked): all RAL colours
End part set comprising:
- 1 A4 stainless steel end (160x55x124.5 mm) + 1 EPDM expansion joint (160x50x5 mm) with 12 12
mm holes
Intermediate part set comprising:
- 1 A4 stainless steel intermediate part (160x55x124.5 mm) + 1 EPDM expansion joint (160x50x5 mm)
with 12 12 mm holes
Advantages of SECURIT-LINE T2 SW:
- Covered by QUALICONSULT new technology survey No. 0712003ETN387
- Complying with standard NF EN 795 Class C
- Building quality painting stove hardened - Colour chart, see page 364
- Without cutting the panel sandwich roong
- For even more plus factors, refer to our Safety booklet
INDIVIDUAL SAFETY application for ROOFING:
- Lifeline for metal panel roong. Fits to the bottom sheet (min. width 165 mm) along the metal purlines
with a 3 mm min. thickness, for new build or renovation projects
- Always use with individual protection equipment (NF EN 363)
- Approved for use by two people simultaneously
- Technical study must be performed by the Safety design department
- Do not use as a hanging, lifting or handing point
Cross references :
DRILLNOX 3.5: 5.5x78, see page 62 - DRILLNOX 4 DF: 5.5x125 and 145, see page 68
DRILLNOX 12: 5.5x100, see page 62 - DRILLNOX 12.5 DF : 5.5x115 / 135 and 155, see page 69
Spacers, see page 574 - Cable (code 170 109), see page 578
Shock absorber (code 170 106), see page 577 - Sag compensator (code 170229), see page 577
Bent end part (code 170104), see page 577 - Tensioner (code 170 107), see page 578
Cable clamp kit (code 170 108), see page 578 - Rating plate (code 170 110), see page 579
LR SIL 402 translucent sealant (code 492 100), see page 452 - Power screwdrivers, see page 654
Cross references :
Drill bit, HSS 13x151 (code 282 284), see page 669 - RENOV-SECURIT T2 SW, see page 584
SECURIT-LINE T2 SW, see page 573
(*) Fully painted part (building quality baked): all RAL colours
End part set comprising:
- An A4 stainless steel end anchoring part (160x55x124.5 mm) + 1 EPDM expansion joint (160x50x38
mm) corrugated on the underside
Intermediate part set comprising:
- An A4 stainless steel intermediate anchoring part (160x55x130 mm) + 1 EPDM expansion joint
(160x50x38 mm) corrugated on the underside
Advantages of SECURIT-LINE T2 TOG:
- Covered by QUALICONSULT new technology survey No. 0712003ETN388
- Complying with standard NF EN 795 Class C
- Building quality painting stove hardened - Colour chart, see page 364
- Without cutting the roong
- For even more plus factors, refer to our Safety booklet
INDIVIDUAL SAFETY application for ROOFING:
- Lifeline for Galvanized Corrugated Steel roong, 76 x 18 mm corrugations. Fits at the corrugations,
along the metal purlines with a 3 mm minimum thickness, for new build or renovation projects
- Always use with individual protection equipment (NF EN 363)
- Approved for use by two people simultaneously
- Technical study must be performed by the Safety design department
- Do not use as a hanging, lifting or handing point
Cross references :
DRILLNOX 3.5: 5.5x78, see page 62 - DRILLNOX 12: 5.5x80, see page 62
Cable (code 170 109), see page 578 - Shock absorber (code 170 106), see page 577
Sag compensator (code 170229), see page 577 - Bent end part (code 170104), see page 577
Tensioner (code 170 107), see page 578 - Cable clamp kit (code 170 108), see page 578
Rating plate (code 170 110), see page 579 - LR SIL 402 translucent sealant (code 492 100), see page 452
Power screwdrivers, see page 654
(#) Where two bre-cement sheets overlap, use SECURIT-LINE T3 anchors with 35 mm spacers
(*) Fully painted part (building quality baked): all RAL colours
End part set comprising:
- An A4 stainless steel omega anchoring part (240x150x71 mm) + 2 EPDM expansion joints (150x61x21
mm) with six 12 mm holes + 12 A2 stainless steel compression spacers + 1 A4 stainless steel bent
end + 2 A4 stainless steel bolts + 2 A4 stainless steel locknuts - Not tted
Intermediate part set comprising:
- An A4 stainless steel omega anchoring part (240x150x71 mm) + 2 EPDM expansion joints (150x61x21
mm) on the underside with six 12 mm holes + 12 A2 stainless steel compression spacers + 1 A4
stainless steel intermediate zig zag anchors + 4 M12 A4 stainless steel bolts + 4 A4 stainless steel
locknuts - Not tted
End part set comprising:
- An A4 stainless steel omega anchoring part (240x150x71 mm) + 2 EPDM expansion joints (150x61x21
mm) on the underside with six 12 mm holes + 12 A2 stainless steel compression spacers + 1 A4
stainless steel pulley wheel + 1 M12 A4 stainless steel bolts + 1 A4 stainless steel locknuts - Not tted
Advantages of SECURIT-LINE T3 FIBRO:
- Has a new technique survey QUALICONSULT No. 5.1 0712004002
- Complying with standard NF EN 795 Class C
- Building quality painting stove hardened - Colour chart, see page 364
- Without cutting the roong
- For even more plus factors, see Glossary on page @glossaire or refer to our Safety booklet
INDIVIDUAL SAFETY application for ROOFING:
- Lifeline for bre-cement deep corrugation 177 x 51 mm roong. Fits in the base of the corrugations
along the metal purlins with a thickness of 3 mm min., in new build and renovation projects.
- Always use with individual protection equipment (NF EN 363)
- Approved for use by two people simultaneously
- Technical study must be performed by the Safety design department
- Do not use as a hanging, lifting or handing point
Cross references :
DRILLNOX 3.5: 5.5x78, see page 62 - DRILLNOX 12: 5.5x80, see page 62
Cable (code 170 109), see page 578 - Shock absorber (code 170 106), see page 577
Sag compensator (code 170229), see page 577 - Tensioner (code 170 107), see page 578
Cable clamp kit (code 170 108), see page 578 - Rating plate (code 170 110), see page 579
Drill bit, HSS 13x151 (code 282 284), see page 669
LR SIL 402 translucent sealant (code 492 100), see page 452 - Power screwdrivers, see page 654
Spacer length : Spacer length
(*) Fully painted part (building quality baked): all RAL colours
End part set comprising:
- An A4 stainless steel angle bracket + 2 M12 hex head A4 stainless steel bolts + 2 A4 stainless steel
lock nuts
Weld-free part requiring no X-ray inspection
- Building quality painting stove hardened - Colour chart, see page 364
INDIVIDUAL SAFETY application for ROOFING:
- Part ts T2 bent or at end anchoring part that form an angle for providing access to a ladder or a
skylight.
- Do not use as a hanging, lifting or handing point
Cross references :
Cable (code 170 109), see page 578 - Tensioner (code 170 107), see page 578
Kit cosse cur serre-cble (code 170 108), voir page 578
Cross references :
Cable (code 170 109), see page 578 - Tensioner (code 170 107), see page 578
Cable clamp + thimble kit (code 170 108), see page 578
Cross references :
Cable (code 170 109), see page 578 - Shock absorber (code 170 106), see page 577
Sag compensator (code 170229), see page 577 - Cable clamp + thimble kit (code 170 108), see page 578
Cross references :
Cable clamp + thimble kit (code 170 108), see page 578 - Shock absorber (code 170 106), see page 577
Sag compensator (code 170229), see page 577 - Tensioner (code 170 107), see page 578
X6
Cross references :
Cble (code 170 109), see page 578 - Shock absorber (code 170 106), see page 577
Sag compensator (code 170229), see page 577 - Tensioner (code 170 107), see page 578
Cross references :
LR WATER SEAL sealent (code 492 134), see page 450
TAPCO impact anchors (code 359 899), see page 222
Cross references :
Metal screws, Stainless steel M12, see page 307 - CHIMFORT ATE, see page 268
STD threaded rod / SS A4 M12x160 (code 340 064), see page 263
BARACO FM 753 / SS A4 M12/10x100 (code 344 253), see page 254
Cross reference :
BODYGUARD, see page 581
x4 BODYGUARD
System comprising:
- Anchor point + support plate with built-in waterproong + fasteners
Advantages of BODYGUARD:
- Satra tested mounting mechanism, complying with standard NF EN 795 Class A
- Fall forces are absorbed and reduced by deforming the attaching eye and the specially shaped zinc
plated steel disk.
- The Bodyguards stainless steel anchor point pivots through 360 as the user moves so that it is always
correctly positioned.
- Quality waterproof nish thanks to the sealing ap included.
- Red in colour, it is easy to identify on the roof.
Bitume
- Fastened by four tipping rods (supplied) that t through the waterproong and insulation with a max.
thickness of 160 mm.
- Regardless of the roof structure used, a reliable mounting system can always be tted.
- Easy to t, with resistant anchoring.
INDIVIDUAL SAFETY application for TERRACES:
- Protects individuals from falls from heights.
- Validated for one person
- Always use with individual protection equipment (NF EN 363)
- For safely performing inspections or regular maintenance jobs.
- Ideally, Bodyguard should be attached to the underlying structure or through the waterproong complex
(concrete, metal sheet).
- Do not use as a hanging, lifting or handing point
Cross references :
CHIMFORT ATE, see page 268 - Rod M10x300 + tipping end, see page 581
Hole saw (code 321 837), see page 580 - Power screwdrivers, see page 654
A bag comprising:
- 4 threaded M10 caulked rods + 4 nuts + 4 elastic washers 21 mm / 1 mm thickness + 4 tippers
INDIVIDUAL SAFETY application for TERRACES:
- Used to mount BODYGUARD through the waterproong complex (steel sheet + 160 mm max. insulation
+ membrane)
Cross reference :
BODYGUARD, see page 581
L : Length
(*) Fully painted part (building quality baked): all RAL colours
12 holes 9 mm
RENOV-SECURIT T2 BAC is a two piece kit:
- An A4 stainless steel anchoring piece (160x99x86 mm) + an EPDM expansion joint (160x50x5 mm) with
12 9 mm holes
Advantages of RENOV-SECURIT T2 BAC:
- Covered by a new technique survey, QUALICONSULT No. 071780100056
- Complying with standard NF EN 795 Class A2
Weld-free part requiring no X-ray inspection
- Building quality painting stove hardened - Colour chart, see page 364
INDIVIDUAL SAFETY application for ROOFING:
- Individual safety anchoring system for metal panel roong. Laid at the bottom of the panels (min. width
165 mm) along the beam with a min. thickness of 3 mm, in new build or renovation projects
- Always use with individual protection equipment (NF EN 363)
- Validated for one person
- Do not use as a lifting or handing point
Cross references :
DRILLNOX 3.5 PI: 5.5x38, see page 61 - DRILLNOX 12: 5.5x62, see page 62
LR SIL 402 translucid sealant (code 492 100), see page 452 - Power screwdrivers, see page 654
(*) Fully painted part (building quality baked): all RAL colours
RENOV-SECURIT T3 BAC comprises:
- An A4 stainless steel omega anchor (240x150x71 mm) + 2 EPDM expansion seals (150x50x5 mm) with
6 9 mm holes + 1 A4 stainless steel end plate + 2 M12 A4 stainless steel bolts + 2 A4 stainless steel
lock washers - Not tted
Advantages of RENOV-SECURIT T3 BAC:
- Complying with standard NF EN 795 Class A2
Weld-free part requiring no X-ray inspection
- Building quality painting stove hardened - Colour chart, see page 364
INDIVIDUAL SAFETY application for ROOFING:
- Individual safety anchoring for metal roong. Laid astride the corrugation along the beam with a 3 mm
min. thickness, in new build or renovation projects
- Always use with individual protection equipment (NF EN 363)
- Validated for one person
- Do not use as a lifting or handing point
Cross references :
DRILLNOX 3.5 PI: 5.5x50, see page 61 - DRILLNOX 12: 5.5x62, see page 62
LR SIL 402 translucid sealant (code 492 100), see page 452 - Power screwdrivers, see page 654
(*) Fully painted part (building quality baked): all RAL colours
12 holes 12 mm
RENOV-SECURIT T2 SW comprises a two piece set:
- An A4 stainless steel anchoring piece (160x99x86 mm) + an EPDM expansion seal (160x50x5 mm) with
12 12 mm holes.
Advantages of RENOV-SECURIT T2 SW:
- Covered by a new technique survey, QUALICONSULT No. 0712003ETN131
- Complying with standard NF EN 795 Class A2
Weld-free part requiring no X-ray inspection
- Building quality painting stove hardened - Colour chart, see page 364
INDIVIDUAL SAFETY application for ROOFING:
- Individual safety anchoring for metal sandwich roong 30 to 100 mm thick. Laid at the bottom of the
corrugation (min. width 165 mm), along the beam (min. thick. 3 mm), in new build or renovation projects
- Always use with individual protection equipment (NF EN 363)
- Validated for one person
- Do not use as a lifting or handing point
Cross references :
DRILLNOX 3.5: 5.5x78, see page 62 - DRILLNOX 4 DF: 5.5x125 and 145, see page 68
DRILLNOX 12: 5.5x100, see page 62 - DRILLNOX 12.5 DF : 5.5x115 / 135 and 155, see page 69
Spacers, see page 574 - LR SIL 402 translucid sealant (code 492 100), see page 452
Power screwdrivers, see page 654
Cross references :
Drill bit, HSS 13x151 (code 282 284), see page 669 - RENOV-SECURIT T2 SW, see page 584
SECURIT-LINE T2 SW, see page 573
(*) Fully painted part (building quality baked): all RAL colours
RENOV-SECURIT T2 TOG comprises a two piece set:
- An A4 stainless steel anchoring part (160x99x86 mm) + an EPDM expansion seal (160x50x38 mm)
corrugated on the underside
Advantages of RENOV-SECURIT T2 TOG:
- Covered by a new technique survey, QUALICONSULT No. 0712003ETN131
- Complying with standard NF EN 795 Class A2
Weld-free part requiring no X-ray inspection
- Building quality painting stove hardened - Colour chart, see page 364
INDIVIDUAL SAFETY application for ROOFING:
- Individual safety anchoring for galvanized corrugated steel roong 76 x 18 mm. Laid of the corrugation
along the metal beam, 3 mm min. thickness, for new build and renovation projects
- Always use with individual protection equipment (NF EN 363)
- Validated for one person
- Do not use as a lifting or handing point
Cross references :
DRILLNOX 3.5: 5.5x78, see page 62 - DRILLNOX 12: 5.5x80, see page 62
LR SIL 402 translucid sealant (code 492 100), see page 452 - Power screwdrivers, see page 654
(#) Where two bre-cement panel overlap, use RENOV-SECURIT with a 35 mm spacer
(*) Fully painted part (building quality baked): all RAL colours
RENOV-SECURIT T3 FIBRO comprises:
- An A4 stainless steel omega anchor (240x150x71 mm) + Two EPDM expansion joints (150x61x21 mm)
corrugated on the underside with six 12 mm holes + 12 A2 stainless steel compression spacers + 1
A4 stainless steeel at end piece + 2 M12 A4 stainless steel bolts + 2 A4 stainless steel lock nuts - Not
tted
Advantages of RENOV-SECURIT T3 FIBRO:
- Complying with standard NF EN 795 Class A2
- Weld-free part requiring no X-ray inspection
- Building quality painting stove hardened - Colour chart, see page 364
INDIVIDUAL SAFETY application for ROOFING:
- Individual safety anchoring for deep corrugation 177 x 51 mm asbestos free bre-cement sheets. Laid at
the bottom of the corrugation along the metal beam, 3 mm min. thickness, for new build and renovation
projects
- Always use with individual protection equipment (NF EN 363)
- Validated for one person
- Do not use as a lifting or handing point
Cross references :
DRILLNOX 3.5: 5.5x78, see page 62 - DRILLNOX 12: 5.5x80, see page 62
Drill bit, HSS 13 mm, see page 669 - LR SIL 402 translucid sealant (code 492 100), see page 452
Power screwdrivers, see page 654
Spacer length : Spacer length
QUICK-SECURIT
x L d0 * h1 Pack. Code
16 x 300 16 - 18 90 1 170 190
Cross references :
Drill bits, concrete, see page 680 - Cap (code 170 197), see page 282
CAP / Pa
Application:
- Used to cover the hole left after removing QUICK-SECURIT or RAVALCO / P
Cross references :
RAVALCO / P (code 359 220), see page 280 - Anchors, see page 280
QUICK-SECURIT safety anchor (code 170 190), see page 587
d0* : Drilling diameter to be adjusted according to expansion, value given for information. - h1 : Support drilling depth - L : Length
- Head : Head outside diameter
2 holes 8
Cross references :
M12 anchor bolts, see page 590 - VBU TF 4.5 x 35 (code 25 445), see page 39
2 holes 8
Cross references :
M12 anchor bolts, see page 590 - VBU TF 4.5 x 35 (code 25 445), see page 39
2 holes 8
Cross references :
M12 anchor bolts, see page 590 - VBU TF 4.5 x 35 (code 25 445), see page 39
A bag comprises:
- An M12 hex head bolt + 1 nut + 1 40 mm / 2.5 mm thickness at washer + 2 toothed clamps 50 mm
SECURIT 2005 BOLT validated with SECURIT 2005 complying with standard NF EN 517 type A
INDIVIDUAL SAFETY application for ROOFING:
- Used to fasten SECURIT 2005 to the framework
Cross references :
VBU TF 4.5 x 35 (code 25 445), see page 39 - SECURIT 2005, see page 588
Drill bit, HSS 13 mm, see page 669
L : Length
CHAPTER 12
631 & 632 633 & 634 635 635 & 636
RODENT-PROOF GRILLE ZACFIX ANCHOR + ZINTANE WIRE GLUE SYSTEM FUNERAL MONUMENT ATTACHMENT
Hauteur chapper
Epaisseur de lisolant en mm :
Nu Nu en mm : 6- paisseur de lisolant :........................................mm
13- Habillage des linteaux : Brique Horizontale Brique Verticale Hors Lot (en aluminium)
14- Habillage des retours de baies : Brique Hors Lot (en aluminium)
15- Console avec Bate : (voir schma de droite, Utilisation : devant relev dtanchit, devant coffre de volet roulant)
* : Attention selon le DTU 20.1: "A partir de 2 lignes et plus de 6 m de hauteur, l'ensemble des consoles et cornires sera fabriqu en acier
inoxydable, matriau de rfrence 3 selon la norme NF EN 845-1"
ETANCO - Parc des Erables - Bt.1 - 66 Route de Sartrouville - BP 49 - 78231 LE PECQ Cedex - FRANCE - Tl. : 01 34 80 52 00 - Fax : 01 30 71 01 89 - etanco.eu
ISOLCO 3000 P / Ga
L Pack. Code
40 100 360 991
50 200 360 993
60 200 360 995
70 200 360 997
80 200 361 000
90 200 361 005
100 100 361 010
110 100 361 015
120 100 361 020
130 100 361 026
140 100 361 030
150 100 361 035
Opening 9x30 160 100 361 040
Opening 8x50 170 100 361 046
Hole 5,2 180 100 361 050
190 100 361 048
200 100 361 051
210 100 361 049
220 100 361 060
230 50 361 056
240 50 361 052
250 50 361 053
260 50 361 055
270 50 361 070
280 50 361 057
290 50 361 058
300 50 361 054
Cross references :
BARACO FM 753 M8 anchor, see page 254 - BARACO FM 753 CRACK M8 anchor, see page 256
MP3 M6 or M8 anchors, see page 245 - CHIMFORT GREEN M8 chemical anchor, see page 264
CHIMFORT ATE M8 chemical anchor, see page 268 - GRISBY Extensions, see page 601
SPIDO extension, see page 600 - TRCC bolt (code 54 505), see page 300
Fan washer (code 73 010), see page 503 - Screw-in lag bolt (code 19 802), see page 43
VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
FASTOVIS PI 5.5x25 (code 335 695), see page 116 - Angle bar (code 369 252), see page 605
L : Length
ISOLCO 3000 P / SS A2
L Pack. Code
60 100 361 300
80 100 361 304
100 100 361 311
110 100 361 361
120 100 361 308
140 100 361 315
160 100 361 316
170 100 361 318
180 50 361 321
200 50 361 320
220 50 361 324
240 50 361 323
Opening 9x30
280 50 361 326
Opening 8x50
300 50 361 322
Hole 5,2
Cross references :
BARACO FM 753 / SS A4 M8 anchor, see page 254
BARACO FM 753 CRACK / SS A4 M8 anchor, see page 256
MP3 / SS A4 M6 or M8 anchor, see page 245 - CHIMFORT GREEN M8 chemical anchor, see page 264
CHIMFORT ATE M8 chemical anchor, see page 268 - Extensions, see page 601
TRCC bolt (code 54 505), see page 300 - Fan washer, SS A2 (code 73 130), see page 503
Screw-in lag bolt (code 19 802), see page 43 - Wood screw, VBU / SS 5x40 (code 33 020), see page 30
KONSOL
L Pack. Code
60 100 363 000
80 80 363 003
100 50 363 006
120 50 363 009
140 50 363 012
160 40 363 016
180 45 363 019
Opening 9 x 30 200 36 363 022
Advantage:
- Very high resistance to bending
Hot galvanised and A2 Aisi 304 austenitic stainless steel on request.
For more informations, refer to our FACADE booklet.
Hole 5,5 Facade application:
- Reinforced bracket for ventilated facade horizontally mounting metal rails
Opening 8 x 45
Cross references :
BARACO FM 753 M8 anchors, see page 254 - BARACO FM 753 CRACK M8 anchors, see page 256
MP3 M6 or M8 anchors, see page 245 - CHIMFORT GREEN M8 chemical anchor, see page 264
CHIMFORT ATE M8 chemical anchor, see page 268 - SPIDO extension, see page 600
TRCC bolt (code 54 505), see page 300 - Fan washer (code 73 010), see page 503
FASTOVIS PI 5.5x25 (code 335 695), see page 116 - Angle bar (code 369 252), see page 605
L : Length
SPIDO
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 60 mm
Advantages:
- Compensates for out of plumb indications, the spring clip is used to clip the metal rail, very high
resistance to bending (with KONSOL)
For more informations, refer to our FACADE booklet.
Facade application:
- Adjustable extension ts ISOLCO brackets for vertically fastening metal rails.
- Adjustable extension ts KONSOL reinforced brackets for horizontally fastening metal rails.
Hole 5,5
KONSOL
A.R.
A.R.
ISOLCO
Cross references :
ISOLCO 3000 P, see page 598 - KONSOL, see page 599 - TRCC bolt (code 54 505), see page 300
Fan washer (code 73 010), see page 503 - FASTOVIS PI 5.5x25 (code 335 695), see page 116
Angle bar (code 369 252), see page 605
L : Length
GRISBY PM / 3-hole
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 80 mm
Complying with CSTB 3194 booklet
Offset 7 mm estension for passing a screw head between the bracket and its extension
Facade application:
- Adjustable extension that ts ISOLCO brackets for vertically mounting metal rails.
Hole 8
Hole 5
Cross references :
ISOLCO 3000 P, see page 598 - TRCC bolt (code 54 505), see page 300
Fan washer (code 73 010), see page 503 - Stainless steel rivet 4.8x18 (code 273 600), see page 188
Alu/steel 4.8x14 rivet (code 275 220), see page 193 - FASTOVIS PI 5.5x25 (code 335 695), see page 116
Angle bar (code 369 252), see page 605
GRISBY GM / 5-hole
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 80 mm
Complying with CSTB 3316 booklet
Offset 7 mm estension for passing a screw head between the bracket and its extension
Facade application:
- Adjustable extension that ts ISOLCO brackets for vertically mounting timber frames.
Hole 8
Hole 5
Cross references :
ISOLCO 3000 P, see page 598 - TRCC bolt (code 54 505), see page 300
Fan washer (code 73 010), see page 503 - Screw-in lag bolt (code 19 802), see page 43
VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
L : Length
GRISBY 180
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 60 mm
Facade application:
- Adjustable extension that ts ISOLCO brackets for vertically mounting timber frames.
Hole 5
Opening 8 x 40
Cross references :
ISOLCO 3000 P, see page 598 - TRCC bolt (code 54 505), see page 300
Fan washer (code 73 010), see page 503 - Screw-in lag bolt (code 19 802), see page 43
VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
GRISBY 90
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 60 mm
Facade application:
- Adjustable extension that ts ISOLCO brackets for vertically mounting timber frames.
Hole 5
Opening 8 x 40
Cross references :
ISOLCO 3000 P, see page 598 - TRCC bolt (code 54 505), see page 300
Fan washer (code 73 010), see page 503 - Screw-in lag bolt (code 19 802), see page 43
VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
L : Length
GRISBY SIMPLE
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 80 mm
Facade application:
- Adjustable extension that ts ISOLCO brackets for vertically mounting timber frames.
Cross references :
ISOLCO 3000 P, see page 598 - TRCC bolt (code 54 505), see page 300
Fan washer (code 73 010), see page 503 - Screw-in lag bolt (code 19 802), see page 43
VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
U REINFORCEMENT
L Pack. Code
250 30 361 153
300 25 361 155
Facade application:
- U shaped reinforcement against buckling of ISOLCO 3000 P brackets with lengths in excess of 200 mm.
Cross reference :
GOLDOVIS (code 331 200), see page 124
FACADE ACCESSORY
PIERCED BRACKET FOR ATTACHING WOODEN RAFTERS
Galvanized steel Z 275
2.5 mm thickness
Facade application:
- Pierced brakcet for attaching wooden rafters
Cross references :
Anchoring nail (code 29 900), see page 51 - VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
Ht : Height - L : Length
CORNER PLATE
Ht L Pack. Code
120 180 25 361 124
Facade application:
- ISOLCO bracket that ts a corner plate for attaching rectangular or square rafters
Opening 8 x 60
Cross references :
ISOLCO 3000 P, see page 598 - BARACO FM 753 M8 anchor, see page 254
TRCC bolt (code 54 505), see page 300 - Fan washer (code 73 010), see page 503
Screw-in lag bolt (code 19 802), see page 43 - VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
Cross references :
Anchoring nail (code 29 900), see page 51 - VBU 4,5 wood screw, see page 39
ANGLE BAR
Cross references :
SPIDO extension (code 363 015), see page 600 - Stainless 4.8x18 rivet (code 273 600), see page 188
Alu/steel 4.8x14 rivet (code 275 220), see page 193 - FASTOVIS PI 5.5x25 (code 335 695), see page 116
OMEGA PROFILE
Galvanized steel Z 275
1.5 mm thickness
OMEGA PROFILE
Cross references :
SPIDO extension (code 363 015), see page 600 - Stainless 4.8x18 rivet (code 273 600), see page 188
Alu/steel 4.8x14 rivet (code 275 220), see page 193 - FASTOVIS PI 5.5x25 (code 335 695), see page 116
C PROFILE
Galvanized steel Z 275
1.5 mm thickness
C PROFILE
Cross references :
SPIDO extension (code 363 015), see page 600 - Stainless 4.8x18 rivet (code 273 600), see page 188
Alu/steel 4.8x14 rivet (code 275 220), see page 193 - FASTOVIS PI 5.5x25 (code 335 695), see page 116
DENTIFIX
L Ht P Pack. Code
150 50 40 300 260 800
Facade application:
- Soft insulation fastener, can be nailed onto timber rafters
Ht : Height - L : Length
15 30 611 702
20 30 611 704
15 30 611 712
20 30 611 714
P.A.S.
Panel
thick.
For panel thick. (mm) Colour Pack. (m) * Code
6 White 30 366 700
6 Black 30 366 702
6 Grey 30 366 706
6 Brown 30 366 704
P.H.
Panel P.U.
thick.
For panel thick. (mm) Colour Pack. (m) * Code
10 White 25 366 670
10 Black 25 366 671
B
A
Cross references :
TAP-LARGE 6/10x40 anchor (Zn code 359 130) or (SS A2 code 359 091), see page 224
Drill bits, concrete, see page 680
Cross reference :
Stainless steel retaining clip (code 611 356 or 611 358), see page 611
Cross reference :
Stainless steel retaining clip (code 611 356 or 611 358), see page 611
Cross reference :
Stainless steel retaining clip (codes 611 356 or 611 358), see page 611
Cross reference :
Stainless steel retaining clip (codes 611 356 or 611 358), see page 611
RETAINING CLIP / SS
Cross references :
FLAT JOINT COVER, see page 610 - CORNER JOINT COVER, see page 611
Cross references :
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188
Drill bit, steel 4.2 (code 281 991), see page 669
Cross references :
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188
Drill bit, steel 4.2 (code 281 991), see page 669
Cross references :
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188
Drill bit, steel 4.2 (code 281 991), see page 669
Cross references :
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188
Drill bit, steel 4.2 (code 281 991), see page 669
ALAGRAFE 1/2
Cross references :
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188
Drill bit, steel 4.2 (code 281 991), see page 669
PATAGRAF PR 65
Cross references :
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188
Drill bit, steel 4.2 (code 281 991), see page 669
Carrying element
(*) Dn min. / max. with Thermostop wedge 6 mm thickness
Complying with CSTB 3194 booklet
VERITAS Test Report No. GEN 1 / 000 118 X 01 complying with Annex 1 CSTB 3194 booklet (January 2000)
Complying with standards: NF A 50-411 & NF A 50-710
For more informations, refer to our FACADE booklet.
Facade application:
- Aluminium framework system, bracket for vertically fastening aluminium proles.
Cross references :
T prole, see page 619 - L prole, see page 620 - Thermostop LR 80 wedge (code 611 013), see page 628
BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256
MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264
CHIMFORT ATE M10 chemical anchor, see page 268
L : Length
Cross references :
T prole, see page 619 - L prole, see page 620
Thermostop LR 150 wedge (code 611 014), see page 628 - BARACO FM 753 M10 anchor, see page 254
BARACO FM 753 CRACK M10 anchor, see page 256 - MP3 M6-8-10 anchor, see page 245
CHIMFORT GREEN M10 chemical anchor, see page 264
CHIMFORT ATE M10 chemical anchor, see page 268
L : Length
Cross references :
T prole, see page 619 - L prole, see page 620 - Thermostop LR 80 wedge (code 611 013), see page 628
BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256
MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264
CHIMFORT ATE M10 chemical anchor, see page 268
Cross references :
T prole, see page 619 - L prole, see page 620
Thermostop LR 150 wedge (code 611 014), see page 628 - BARACO FM 753 M10 anchor, see page 254
BARACO FM 753 CRACK M10 anchor, see page 256 - MP3 M6-8-10 anchor, see page 245
CHIMFORT GREEN M10 chemical anchor, see page 264
CHIMFORT ATE M10 chemical anchor, see page 268
L : Length
Cross references :
ISOLALU LR 80, see page 616 - ISOLALU LR 150, see page 617
Thermostop wedge (code 611 013 or 611 014), see page 628
BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256
MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264
CHIMFORT ATE M10 chemical anchor, see page 268
Thick. : Thickness
50 x 50 3 6 1 667 135
Cross references :
ISOLALU LR 80, see page 616 - ISOLALU LR 150, see page 617
Thermostop wedge (code 611 013 or 611 014), see page 628
BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256
MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264
CHIMFORT ATE M10 chemical anchor, see page 268
Cross references :
ISOLALU LR 80, see page 616 - ISOLALU LR 150, see page 617
Thermostop wedge (code 611 013 or 611 014), see page 628
BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256
MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264
CHIMFORT ATE M10 chemical anchor, see page 268
Thick. : Thickness
Cross references :
FACALU T 80/52 prole, see page 619 - FACALU T 110/52 prole (code 611 015), see page 619
FACALU L 50/42 prole, see page 620 - BARACO FM 753 M10 anchor, see page 254
BARACO FM 753 CRACK M10 anchor, see page 256 - MP3 M6-8-10 anchor, see page 245
CHIMFORT GREEN M10 chemical anchor, see page 264
CHIMFORT ATE M10 chemical anchor, see page 268
Thick. : Thickness
Opening
5,5 x 25
Cross references :
FACALU+ prole, see page 622 - FACALU+ pressure base, see page 623
BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256
CHIMFORT GREEN M10 chemical anchor, see page 264
CHIMFORT ATE M10 chemical anchor, see page 268
Cross references :
ISOLALU+ LR 200, see page 622 - FACALU+ pressure base, see page 623
Cross references :
ISOLALU+ LR 200, see page 622 - FACALU+ prole, see page 622
INVERTED C RAIL
Cross references :
Standard staple, see page 624 - Adjustable staple, see page 624
STANDARD STAPLE
Aluminium 6060 T5
STANDARD STAPLE
Cross references :
Inverted C rail, see page 624 - Stainless steel blind bolt TB12 6x11.5 (code 611 130), see page 630
Perx hex head stainless steel bolt (code 300 466), see page 80
ADJUSTABLE STAPLE
Cross references :
Inverted C rail, see page 624 - Stainless steel blind bolt TB12 6x11.5 (code 611 130), see page 630
Hex head stainless steel metal screw (code 69 288), see page 307
Thick. : Thickness - L : Length
C+ RAIL
Cross references :
STAPLE Standard C+, see page 625 - STAPLE Adjustable C+, see page 625
STANDARD STAPLE
Aluminium 6060 T5
STANDARD C+ STAPLE
Cross references :
Inverted C rail, see page 624 - Blind stainless steel screws TB12 6x11.5 (code 611 130), see page 630
Perx hex head stainless steel bolts (code 300 466), see page 80
ADJUSTABLE C+ STAPLE
Cross references :
Inverted C rail, see page 624 - Stainless steel blind bolt TB12 6x11.5 (code 611 130), see page 630
Stainless steel hex head metal screw (code 69 288), see page 307
Thick. : Thickness - L : Length
PROFILE TS 200
Cross references :
Standard lug TS 200 (code 611 093), see page 626 - Adjustable lug TS 200 (code 611 094), see page 626
Hex head stainless steel metal screw 8x25 (code 69 336), see page 307
Perx hex head stainless steel screw 5.5x25 (code 300 466), see page 80
Aluminium 6060 T5
Pack. Code
1 611 093
Pack. Code
1 611 094
Cross references :
Hex head stainless steel metal screw 8x25 (code 69 336), see page 307
Perx hex head stainless steel screw 5.5x25 (code 300 466), see page 80
THERMOSTOP wedge
Cross references :
ISOLALU LR 80, see page 616 - ISOLALU LR 150, see page 617
THERMOSTOP CLIP
Cross references :
BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256
MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264
CHIMFORT ATE M10 chemical anchor, see page 268
BEARING WASHER
Austenitic stainless steel
A2 Aisi 304
FLAT WASHER / SS A2
Cross references :
BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256
MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264
CHIMFORT ATE M10 chemical anchor, see page 268
Thick. : Thickness - Hole : Hole diameter
Cross reference :
HSS drill bits, see page 669
LR 5 - LR 20 13 1 611 110
Facade application:
- Accessory specially designed for mechanically attaching facade panels to ensure that the necessary
space is left for material expansion.
Cross references :
ACCUBIRD wireless riveter (code 273 450), see page 675 - LR 5 reveter (code 273 330), see page 672
LR 20 riveter (code 273 325), see page 672
ADHESIVE BAND
Colour Width Roll lg. (ml) No. rolls Pack. (m) Code
Black 40 10 8 80 611 750
Black 80 25 2 50 611 307
Black 100 25 2 50 611 319
Black 120 25 2 50 611 327
Facade application:
- Black tape obscuring the aluminum prol between two panels
Cross references :
STAPLE Standard, see page 624 - STAPLE Adjustable, see page 624
STAPLE Standard C+, see page 625 - STAPLE Adjustable C+, see page 625
8 x 25 13 100 69 336
Cross references :
Inverted C RAIL, see page 624 - STAPLE Adjustable, see page 624 - RAIL C+, see page 625
STAPLE Adjustable C+, see page 625 - Adjustable lug TS 200 (code 611 094), see page 626
Cross references :
Inverted C RAIL, see page 624 - STAPLE Standard, see page 624 - RAIL C+, see page 625
STAPLE Standard C+, see page 625 - Adjustable lug TS 200 (code 611 094), see page 626
CP on Alu : Drilling capacity into aluminium (minimum / maximum) - Pattern : Bit drive recess - H : Hex. drive - L : Length
(#) Boxed
Complying with DTU 55.2
CSTB Technical Report No. 1/05-827
A tub comprises:
Air - 50 lug bodies made of A2 stainless steel, 30x3 mm section with M 10 crimped nut (17 mm Hex.) free to
Stone space Concrete
rotate
Ht - 50 Rod with M 10 at, non-removable, made of A2 stainless steel
- 50 lugs with A2 stainless steel anges
- 50 blind sliding sleeves made of rigid PVC
For more informations, refer to our FACADE booklet.
Facade application:
- Fastening stone cladding to the facade
Cross references :
BARACO FM 753 anchor / SS A4 M8 (code 344 221), see page 254
BARACO FM 753 CRACK anchor / SS A4 M8, see page 256
CHIMFORT GREEN M8 stainless rod chemical anchor, see page 264
CHIMFORT ATE M8 stainless rod, see page 268 - Drill bit, concrete 8 mm, see page 681
Contact washer / SS A2 (code 77 000), see page 504
(#) Boxed
Complying with DTU 55.2
CSTB Technical Report No. 1/05-827
A Bucket comprises:
- 50 lug bodies made of A2 stainless steel, 30x4 mm section with M 12 crimped nut (19 mm Hex.) free to
rotate
- 50 Rod with M 12 at, non-removable, made of A2 stainless steel
- 50 lugs with A2 stainless steel anges
- 50 blind sliding sleeves made of rigid PVC
For more informations, refer to our FACADE booklet.
Facade application:
- Fastening stone cladding to the facade
Cross references :
BARACO FM 753 anchor / In A4 M8 (code 344 221), see page 254
BARACO FM 753 CRACK anchor / In A4 M8, see page 256
CHIMFORT GREEN M8 stainless rod chemical anchor, see page 264
CHIMFORT ATE M8 stainless rod, see page 268 - Drill bit, concrete 8 mm, see page 681
Contact washer / SS A2 (code 77 000), see page 504
(#) Boxed
A Bucket comprises:
- 50 lug bodies made of A2 stainless steel, 30x3 mm section with M 10 crimped nut (17 mm Hex.) free to
rotate
- 50 Rod with M 10 at, A2 stainless, not tted
- 50 lugs with A2 stainless steel anges
- 50 blind sliding sleeves made of rigid PVC
Facade application:
- Fastening stone cladding to the facade
Cross references :
BARACO FM 753 anchor / In A4 M8 (code 344 221), see page 254
BARACO FM 753 CRACK anchor / In A4 M8, see page 256
CHIMFORT GREEN M8 stainless rod chemical anchor, see page 264
CHIMFORT ATE M8 stainless rod, see page 268 - Drill bit, concrete 8 mm, see page 681
Contact washer / SS A2 (code 77 000), see page 504
Cross references :
BARACO FM 753 anchor / In A4 M8 (code 344 221), see page 254
BARACO FM 753 CRACK anchor / In A4 M8, see page 256
CHIMFORT GREEN M8 stainless rod chemical anchor, see page 264
CHIMFORT ATE M8 stainless rod, see page 268 - Drill bit, concrete 8 mm, see page 681
Contact washer / SS A2 (code 77 000), see page 504
Ht : Height
CONTACT WASHER
Austenitic stainless steel
A2 Aisi 304 - 1.4 mm thickness
CONTACT WASHER / SS A2
Cross references :
BARACO FM 753 anchor / In A4 M8, see page 254
Drill bit, concrete 8 mm, see page 681
FLATTENED ROD / SS
Facade application:
- Rod that ts the SR model lug for fastening stone cladding to the facade
Cross references :
SR lugs, see page 632 - Flanged pin (code 361 979), see page 634
Blind sleeve (code 361 871), see page 634
L : Length - Hole : Hole diameter
FLANGED LUG / SS
Cross references :
Flattened threaded rods, see page 633 - SR lugs, see page 632
Blind sleeve (code 361 871), see page 634
LUG / SS A4
x L Pack. Code
5 x 70 50 35 951
Facade application:
- Lug for tting stone to edges, ts a attened rod.
Cross references :
Flattened threaded rods, see page 633 - SR lugs, see page 632
Blind sleeve (code 361 871), see page 634
BLIND SLEEVE / PE
x L Pack. Code
7 x 40 50 361 871
Cross references :
Flanged lug (code 361 979), see page 634 - Flattened threaded rods, see page 633
SR lugs, see page 632
L : Length
C RAIL / SS A2
Cross references :
SRM 0 RAIL lugs, see page 636 - Hex head metal screws 8x20 stainless (code 69 335), see page 307
Stainless washer (code 71 921), see page 503 - Stainless rail nut (code 362 821), see page 636
Galvanized steel
RAIL C / Ga
Cross references :
SRM 0 RAIL lugs, see page 636 - Hex head metal screws 8x20 stainless (code 69 335), see page 307
Stainless washer (code 71 921), see page 503 - Stainless rail nut (code 362 821), see page 636
DRILLSTONE
Thick. : Thickness
WIDE WASHER 8 / SS A2
Facade application:
- Wide washer for attaching SRM 0 lug to C rail
Cross references :
Hex head metal screws 8x20 stainless (code 69 335), see page 307
Fan washer, stainless (code 73 130), see page 503 - Stainless rail nut (code 362 821), see page 636
RAIL NUT / SS A2
Facade application:
- M8 tapped rail hole for attaching SRM 0 lug to C rail
Cross references :
C RAIL / SS A2, see page 635 - SRM 0 lugs, see page 631
Hex head metal screws 8x20 stainless (code 69 335), see page 307
Ht : Height - Hole : Hole diameter
Cross references :
TAP-LARGE 6/10x40 anchor (Zn code 359 130) or (SS A2 code 359 091), see page 224
Drill bits, concrete, see page 680
CARRIER LUG / SS A2
ZACFIX
Cross references :
Zintane wire (code 603 039), see page 638 - LR STONE mastic, see page 453
Drill bits, special for stone, 5 mm (code 361 925), see page 688
AKEMI glue (code 361 805), see page 639
ZINTANE WIRE
Cross references :
ZACFIX anchors, see page 240 - LR STONE mastic, see page 453
Drill bits, special for stone, 5 mm (code 361 925), see page 688
AKEMI glue (code 361 805), see page 639
d0 : Support drilling diameter - h1 : Support drilling depth - L : Length
Cross references :
Colouring products (code 361 809), see page 639 - Hardener (code 361 830), see page 639
AKEPOX glues, see page 639
(*) Box of eight assorted 30 ml tubes: Ochre - White - Red brown - Red - Brown - Green - Blue - Black
Facade application:
- Colouring products for AKEMI polyester glues
AKEMI HARDENER
Facade application:
- Hardener for AKEMI polyester glue
AKEPOX GLUE
Facade application:
- Glue for anchoring in stone
Cross references :
Standard angle brackets, see page 641 - Return angle brackets, see page 642
Angle brackets, see page 643 - Angle bars, see page 642 - Renovco 69, see page 644
Cross references :
Adjusting plate, see page 641 - BARACO FM 753 anchor / SS A4 M12, see page 254
BARACO FM 753 CRACK anchor / SS A4 M12, see page 256 - Return angle brackets, see page 642
Angle brackets, see page 643 - Angle bar brackets, see page 642 - Renovco 69, see page 644
Dnmaxi : Maximum distance - Dnmini : Minimum distance
Cross references :
Adjusting plate, see page 641 - BARACO FM 753 anchor / SS A4 M12, see page 254
BARACO FM 753 CRACK anchor / SS A4 M12, see page 256 - Standard angle brackets, see page 641
Angle brackets, see page 643 - Angle bars, see page 642 - Renovco 69, see page 644
Cross references :
Standard angle brackets, see page 641 - Return angle brackets, see page 642
Angle brackets, see page 643 - Renovco 69, see page 644
Dnmaxi : Maximum distance - Dnmini : Minimum distance - L : Length
Cross references :
Adjusting plate, see page 641 - BARACO FM 753 anchor / SS A4 M12, see page 254
BARACO FM 753 CRACK anchor / SS A4 M12, see page 256 - Standard angle brackets, see page 641
Return angle brackets, see page 642 - Angle bars, see page 642 - Renovco 69, see page 644
Dnmaxi : Maximum distance - Dnmini : Minimum distance
Insulation
Facade application:
- Masonry lining system with rod to bend to match the desired length
Cross references :
NYLON XP 6x45 anchor (code 218 873), see page 213 - Retaining clips (code 361 500), see page 644
Water drip washer (code 366 275), see page 645
NYLON XP
x l d d0 h1 Box Code
6 x 45 3-5 6 60 200 218 873
I = hnom
Design use: Solid and hollow materials - (*) With prior testing
Product denition:
- All purpose multi material anchor
d d0
- High quality Nylon, resistant to outside aggression
- Four anti-rotation wings
h1 - Perfect screw guidance in the anchor.
Cross reference :
Drill bits, concrete, see page 680
Orange plastic
RENOVCO 69
RETAINING CLIP
Pack. Code
250 361 500
Facade application:
- Clip washers, 65 x 65 mm, for retaining the insulation for masonry lining on the facade using the
Renovco 69 system
Cross reference :
Renovco 69 rods, see page 644
d : Nominal diameter - d0 : Support drilling diameter - h1 : Support drilling depth - L : Length
Facade application:
- Octagonal 20 mm water drip washer for lining masonry on faades with the Renovco 69 system
New Empty Original
wall space wall
Cross references :
Retaining clips (code 361 500), see page 644 - Renovco 69 rods, see page 644
LINTEL HOOK
Austenitic stainless steel
A2 Aisi 304L
LINTEL HOOK / SS A2
Horizontal brick
Facade application:
- Retains the brick lining around window or door lintels
RETAINING BAND
RETAINING BAND
Model Code
On request Ask us
Facade application:
- Wall panel spacer
Cross reference :
TAPCO TF anchors 8 mm dia. (code 359 960), see page 223
ADJUSTING WEDGE
Coloured plastic
FORK SPACER
50 x 40
Thick. Colour Pack. Code
2 Yellow 100 369 030
3 White 100 369 032
5 Grey 100 369 034
Thick.
Coloured plastic
FORK SPACER
60 x 30
Thick. Colour Pack. Code
2 Blue 100 369 036
3 Red 100 369 038
5 Green 100 369 040
Thick.
Thick.
Facade application:
- Adjustment spacer resistant to 200 Kg/cm
CHAPTER 13
13 - 11 Tester 704
Technical characteristics:
- Power consumption: 450 W. - Useful power: 250 W. - Speed under load 0 - 2,000 rpm - Rotation speed,
no load: 0 - 2,500 rpm - Max. torque: 16 Nm - Power cord with plug: 5.0 m - Screw dia. 4.8 mm -
1/4 (6.35 mm) fast chuck - Weight: 1.3 Kg
Model SCS 4.8-25, supplied with:
- 1 depth stop - 1 1/4 magnetic bit holder - 1 Phillips No. 2 drive bit - 1 wrist strap - 1 belt hook
Cladding application:
- Mechanical installation tools for cladding specialists
Technical characteristics:
- Power consumption: 400 W. - Useful power: 220 W. - Speed under load 0 - 1,300 rpm - Rotation speed,
no load: 0 - 1,900 rpm - Max. torque: 18 Nm - Power cord with plug: 5.0 m - Screw dia. 6.3 mm -
1/4 (6.35 mm) fast chuck - Weight: 1.6 Kg
Model SCS 6.3-19 X, supplied with:
- 1 depth stop - 1 end for hex. head SW8 screws - 1 wrist strap
Roong application:
- Mechanical installation tools for roofers, ideal speed for self drilling screws whith high-capacity drilling
Technical characteristics:
- Power consumption: 400 W. - Useful power: 210 W. - Speed under load: 0 - 600 rpm - Rotation speed,
no load: 0 - 900 rpm - Max. torque: 18 Nm - Max. torque with forced passage: 28 Nm - Power cord with
plug: 5.0 m - Screw dia. 8 mm - Plug anchor dia. 12 mm - 1/4 (6.35 mm) fast chuck - Weight: 1.6 Kg
Model SCU 7-9, supplied with:
- 1 handle - 1 Pozidriv No. 2 drive end
Strong points:
- High power engine for complete screwing
- Universal External clutch adjustment
- Selection of training sets for screwing threaded anchors
- Continuous adjustment of speed
- Excellent ergonomic
- Switch with full reversal of rotational direction
- Depth stops optional for ne tuning of the depth of screwing
Roong application:
- Mechanical tting tool specially for roong specialists
Technical characteristics:
- Voltage / Amperage 14.4V / 3.0 Ah - No load speed: 0 - 2,500 rpm - Drive: 1/4 (6.35 mm) - Max. torque:
20 Nm - Screw dia. 4.8 mm - Weight with battery: 1.6 Kg
Model ASCS 4.8, supplied with:
- Carry case + 2 14.4V 3.0 Ah batteries + 1 fast charger + 1 hook for scaffolding + 1 depth stop + 1 drive
nutsetter hex.
Strong points:
- EC motor FEIN, efcient and maintenance free
- Electronic stopping damage to the couple: Technical Innovation
- Number of assemblies: Indestructible 1 million with certainty
- Lightweight, comfortable working 1.6 Kg
- Speed of rotation adapted, no deterioration of the screw tip
- Powerful up to 20 N / m
- Battery capacity: 300 screws per charge
Cladding application:
- Mechanical installation tools for cladding specialists
Technical characteristics:
- Voltage / Amperage 18V / 3.0 Ah - No load speed: 0 - 1,700 rpm - Drive: 1/4 (6.35 mm) - Max. torque:
30 Nm - Screw dia. 5.5 to 6.3 mm - Weight with battery: 1.8 Kg
Model ASCS 6.3, supplied with:
- Carry case + 2 14.4V 3.0 Ah batteries + 1 fast charger + 1 hook for scaffolding + 1 depth stop + 1 drive
nutsetter hex.
Strong points:
- EC motor FEIN, efcient and maintenance free
- Electronic stopping damage to the couple: Technical Innovation
- Number of assemblies: Indestructible 1 million with certainty
- Lightweight, comfortable working 1.8 Kg
- Speed of rotation adapted, no deterioration of the screw tip
- Powerful up to 30 N / m
- Battery capacity: 150 screws per charge
Roong application:
- Mechanical installation tools for roofers, ideal speed for self drilling screws whith high-capacity drilling
Cross reference :
Screwdriver ASCS 4.8, see page 655
Cross reference :
Screwdriver ASCS 6.3, see page 655
Only used with 14.4 and 18 volts batteries - 3.0 Ah Lithium-Ion batteries
Charge range: 60 min
Technical characteristics:
- Voltage / Amperage 18V / 3.0 Ah - No load speed: 0 - 1,900 rpm - Drive: 1/2 (12.7 mm) - Impact rate:
0 - 2,200 ipm - Max. torque: 610 Nm - Weight with battery: 3 Kg
Model HD18 HIW - 32C, supplied with:
- Carry case + 2 18V 3.0 Ah batteries + One hour fast charger
Model HD18 HIW - 0, supplied alone in a box without battery
Strong points:
- Combines power, lightness and self: New technology lithium ion 18V Compact - 3.0 AH batteries
Compact and lightweight
- Drill and screw around, even in conned areas: only 226 mm long and 3 Kg
- New quadrupole motor with a power / weight ratio and a incredible maximum torque of 610 Nm
- Durability never seen before, along with unmatched performance: Engine quadrupole ultra compact,
protection against overload
- LED charge level indicator
- Highly versatile 18V 3.0 Ah Lithium Ion battery that ts other cordless tools from our progam
Application:
- Mechanical Installation tools ideal for the most intensive applications, such as xing of structural steel or
various industrial applications
Cross references :
Socket drive 1/2, see page 662 - Battery M18 BX, see page 700 - Charger C18 C, see page 700
CONDUCTOR DRIVE SQUARE 1/2 (12.7 MM) FOR FEMALE SOCKET 1/4 (6.35 MM)
ADAPTER HD18 HIW
1/4 end
Conductor drive square Pack. Code
1/4 (6.35 mm) 1 322 908
For use with wrench HD18 HIW to drive an output 1/4 (6.35 mm)
SCREWDRIVER ACCESSORY
NEW GENERATION THIRD HAND SCREWHOLDER
SPECIALLY FOR TH8 FIBRE-CEMENT SCREWS
The third hand ts entirely on the screwdriver Fein SCS 6.3-19X, these two sets are specially designed for
laying on blankets screw MONOVIS for bre-cement asbestos free
Complete set comprising:
E - 1 carry case + 1 FEIN SCS 6.3-19X screwdriver + third hand set + 1 TH 8 One-piece nutsetter + 1
special screwdriver tip for tting screws with dome washers + Instructions for use
Advantages:
- Maintaining the screw into the socket until fully tightened
- Fine adjustment in steps of 0.5 mm depth stop and clutch system ensure proper installation screws
- Small size
- Lightweight
- One-piece nutsetter
- Ease of installation and durability of the binding
Roong application:
- Mechanical installation system of plates for bre-cement (GO or PST) covering the top of corrugations
SCREWDRIVER ACCESSORY
THIRD HAND SCREWDRIVER SET
SPECIALLY FOR TH 8 & 12 - SANDWICH OR FIBRE-CEMENT BOLTS
F G
The third hand only ts the FEIN SCS 6.3-19X power screwdriver, these two sets are specially designed for
tting MONOFAST - MONOVIS - ZACROVIS - FAT - DRILLNOX screws through asbestos-free bre-cement
or polystyrene roong panels
Complete set comprising:
- 1 carry case + 1 FEIN SCS 6.3-19X screwdriver + 1 third hand adapter + 1 TH 8 Self-guided nutsetter +
H
1 TH 12 nutsetter + 1 Adapter lg 100 mm + 1 special screw end for tting screws with dome washers +
1 Sandwich panel screwdriver end + Intrustions for use
Advantages:
- Holds the screw into the drive end until it is completely tightened down = Time savings and never a lost
screw
- Micrometric 0.5 mm adjustment of the depth stop setting and its clutch system ensures that screws are
correctly tted
- Small size
- Lightweight
- Easy to t and durable fastening
Roong application:
- Mechanical installation system of plates for bre-cement GO / PST or polystyrene sheets through the
top of the corrugations
SCREWDRIVER ACCESSORY
ONE-PIECE NUTSETTER
FOR DIRECT INSERTION INTO A POWER SCREWDRIVER
L One-piece SOCKET
E 1/4
For Hex. screw (mm) Length Pack. Code
7 65 1 323 503
8 65 1 323 500
Hex. 10 65 1 323 510
12 65 1 323 520
13 65 1 323 525
Cross references :
STARFIX self-drilling screw, Stainless steel, see page 75
STARZAC STOP self-drilling screw, see page 90
SCREWDRIVER ACCESSORY
STAR STOP END FOR SCREWDRIVER FEIN SCS 4.8-25
STOP END
STAR GRIPP 2 / FEIN 4.8-6.3
For screw pattern Pack. Code
STAR 1 375 013
Cross reference :
FEIN SCS 4.8-25 Screwdriver, see page 651
Cross references :
STARCOLOR self-drilling screw, steel, see page 110
STARZAC self-drilling screw, (zinc/alu) head, see page 86
NUTSETTER FOR ETASOLR SECURIT ONE-PIECE END SCREWS FOR DIRECT INSERTION INTO
A SCREWDRIVER
L MONOBLOC SOCKET
ETASOLR SECURIT - E 1/4
For screw pattern Length Pack. Code
ETASOLR 97 1 345 510
Cross reference :
ETASOLR screw / SS A2, see page 555
Cross reference :
DRILLNOX HP Screw, see page 64
SCREWDRIVER ACCESSORY
DRIVE SOCKET
DRIVE SOCKET
E 1/4
Conductor drive square Length Pack. Code
1/4 (6,35 mm) 50 1 323 100
SOCKET
SOCKET
E 1/4
For hex. screw (mm) Pack. Code
5,5 1 323 950
1/4" Hex. 7 1 323 941
8 1 324 000
10 1 324 020
12 1 324 050
13 1 324 070
Used with socket ends with a 1/4 drive (code 323 100)
Cross reference :
Power screwdriver HD18 HIW, see page 657
SCREWDRIVER ACCESSORY
MAGNETIC BIT HOLDER WITH STAINLESS STEEL CLIP
L BIT HOLDER
STAINLESS STEEL 1/4
For drive end tting Length Pack. Code
1/4 (6.35 mm) - Magnetic 60 1 323 105
BIT HOLDER
L BIT HOLDER
E 1/4
For drive end tting Length Pack. Code
1/4 (6.35 mm) 54 1 323 110
DRIVE BITS
DRIVE BIT
E 1/4
For screw pattern Length Pack. Code
Phillips n 1 25 1 325 015
Phillips n 2 25 1 325 000
Phillips n 3 25 1 325 020
Cross reference :
Screwdriver end holder, see page 663
SCREWDRIVER ACCESSORY
SHANK DRIVE BITS FOR DIRECT INSERTION INTO POWER SCREWDRIVERS
DRIVE BIT
MONOBLOC - E 1/4
For screw or anchor pattern Length Pack. Code
Phillips n 2 50 1 324 990
Phillips n 2 70 1 324 980
Phillips n 2 100 1 324 991
Phillips n 2 130 1 324 992
Phillips n 2 140 1 324 993
Phillips n 2 150 1 324 994
Phillips n 2 180 1 324 996
Phillips n 2 200 1 324 998
Phillips n 2 250 1 324 997
Waterproong application:
- Fitting tools for SK-RB and SK-BC anchors
6 mm
Pozidriv
Cross references :
SK-RB anchors, see page 501 - SK-RB anchors, see page 502
ET 240 - A
Cross references :
EHB DF / 2C in STRIPS, see page 130 - 82 x 40 R load spreading plates in loaders, see page 469
A
C
B
C
FEIN SCS 4.8-25 ST 1800 Phillips n 2 Pozidriv n 3
ANDYPLAST HP
ETANCOPLAST HP
Name For screwdriver Pack. Code
Length
A+C - Complete ANDYPLAST HP set, for Fein SCS 4.8-25 1 240 440
A+C - Complete ANDYPLAST HP set, for ST 1800 1 240 435
Cross references :
Bugle head, 4.8 mm screw (EGB / 2C), see page 157
Bi-metal, bugle head, 4.8 mm screw (ISODRILL TT), see page 74
Countersunk 6.3 mm head screw (FASTOVIS TF 3036 / 2C), see page 149
ETANCOPLAST HP 40, see page 462 - ETANCOPLAST HP 82x40, see page 463
Technical characteristics:
- Power: 630 W - Speed, no load: 0 to 2,900 rpm. - FIXTEC automatic chuck: 13 mm - Reversible
- Torque: 21 Nm - Max. drilling capacity: Steel 13 mm / Wood 30 mm / Masonry 18 mm /
Concrete 15 mm - Weight: 1.8 Kg
Model PDE 13 RX, supplied with:
- Carry case + Additional handle + Depth stop + 4 m cord
Strong points:
- 4-in-1: Drilling concrete / Drilling wood and metal / Smooth screw tting and removal
- Change tools quickly and easily thanks to the FIXTEC chuck
- Speed adjuster with preset
- Impact stop
- Reversible
- Access to brushes
- IMB Technology: Integrated metal block for greater rigidity and durability, and reduced weight
- Softgrip coating for greater comfort
Cross references :
Drill bits, HSS, see page 669 - Special drill bits, LR, see page 668
Drill bit, layered (code 282 950), see page 670 - Drill bits, cobalt, see page 670
Drill bits, Joran, see page 688
Technical characteristics:
- Volts / Amps 18V / 3.0 Ah - Speed, no load: First 0 - 450 rpm / Second 0 - 1,800 rpm - Automatic chuck:
1.5 - 13 mm - Max. drilling capacity: Steel 13 mm / Wood 55 mm / Stone 16 mm - Hammer
impact rate 28.000 ipm - Max. torque: 85 Nm - Weight with battery: 2.4 kg
Model HD18 PD - 32C, delivered with:
- Carry case + Two 18V 3.0 Ah batteries + 1 hour fast charger
Stong points:
- New quadrupole motor which provides exceptional power / weight ratio
- New percussion system generating 28,000 impacts per minute
- 24 position adjustable torque
- New electronic control system for a long life of the tool and battery (protection against overload)
- New all metal automatic chuck for optimum power transmission and longer life
- Function selector: Drilling, torque controlled screwdriver and percussion drilling
- LED lighting
- LED charge indicator
Cross references :
Drill bits, HSS, see page 669 - Special drill bits, LR, see page 668
Drill bit, carbide 14 mm (code 284 895), see page 671 - Drill bit, layered (code 282 950), see page 670
Drill bits, cobalt, see page 670 - Drill bits, Joran, see page 688 - Battery M18 BX, see page 700
Charger C18 C, see page 700
x L Bag of Code
4 x 60 10 284 300
4 x 90 10 284 350
4 x 150 10 284 400
4 x 200 10 284 420
Drill bit, 5.05 x 200 mm: Special drill for tray sealing support for our RER or PER systems, 4.8 ready-
tted, see page 491
Drill bit 5.30 x 230 mm: Special drill for tray sealing support for our RER or PER systems, 5 ready-tted,
see page 491
Drill bit for self-tapping 6.3 mm screws (types: FASTO, AT, ZACROFAST) tted in steel supports
Table of pre-drilling (values given as an indication):
- Zinc plated steel screws (model A): Support thickness 1 to 2 mm = 4 / Support 2.1 to 3 mm = 5.05
- Zinc plated steel screw (model B): Support thickness 3.1 to 3.9 mm = 5.05 / Support 4 to 8 mm =
5.65 / Support 8.1 to 15 mm = 5.80 / Support over 15 mm = 5.95
- Stainless steel screw (model A): Support thickness 1 to 2 mm = 4 / Support 2.1 to 2.9 mm = 5.05
- Stainless steel screw (model B): Support thickness 3 to 6 mm = 5.65 / Support 6.1 to 10 mm =
5.80 / Support over 10 mm = 5.95
Cross references :
Drill PDE 13 RX, see page 667 - Cordless drill HD18 PD, see page 667
Self-tapping screws, see page 164 - Rivets R.E.R., see page 491 - Rivets P.E.R., see page 493
L : Length
x L Pack. Code
3,1 x 65 10 281 838
3,2 x 65 10 281 840
3,5 x 70 10 281 860
3,8 x 75 10 281 870
4 x 75 10 281 988
4,1 x 75 10 281 990
4,2 x 75 10 281 991
4,5 x 80 10 281 993
4,8 x 86 10 282 010
4,9 x 86 10 282 013
5 x 86 10 282 020
5,1 x 86 10 282 030
5,2 x 86 10 282 040
5,3 x 86 10 282 050
5,4 x 93 10 282 060
5,6 x 93 10 282 070
5,7 x 93 10 282 090
5,8 x 93 10 282 100
6 x 93 10 282 120
6,1 x 101 10 282 125
6,2 x 101 10 282 140
6,5 x 101 10 282 170
Cross references :
Drill PDE 13 RX, see page 667 - Cordless drill HD18 PD, see page 667
L : Length
Application:
- Pre-drilling steel and translucid panels
Pre-drilling table:
- Steel roong panels / Pre-drilling = Fastener (rounded up)
- Aluminum roong panels / Pre-drilling = Fastener + 1 mm
- Polyester panel / Pre-drilling = Fastener + 1 mm
- Polycarbonate panel / Pre-drilling = Fastener + 4 mm
- PVC panel / Pre-drilling = Fastener + 4 mm
Cross references :
Drill PDE 13 RX, see page 667 - Cordless drill HD18 PD, see page 667
Application:
- Pre-drilling stainless and hard steel sheets
Cross references :
Drill PDE 13 RX, see page 667 - Cordless drill HD18 PD, see page 667
x L Pack. Code
14 x 150 1 284 895
Special drill bit for MODULCO: OVER ROOFING system, see page 536
Cross references :
Drill PDE 13 RX, see page 667 - Cordless hammer drill HD18 PD, see page 667
Aspiration nozzle (code 339 090), see page 542
L : Length
Pack. Code
1 273 322
Supplied with one wrench + 4 tips: for rivets diameters from 2.4 to 4.8 mm & BULB-TITE 5.2 mm rivets
Cross references :
Set of three replacement jaws (code 273 350), see page 672 - Rivets, unsealed, see page 193
Rivets, sealed, see page 187 - Rivets, Bulb-tite 5.2 mm, see page 190
EXTENDER
LR 5
Pack. Code
1 273 330
Cross references :
Set of three replacement jaws (code 273 350), see page 672 - Rivets T.R.P. tted, see page 499
Rivets T.R.P. 6.4 mm, see page 192 - Rivets, unsealed, see page 193 - Rivets, sealed, see page 187
Rivets, Bulb-tite 5.2 mm, see page 190
Pack. Code
1 273 325
Cross references :
Set of three replacement jaws (code 273 350), see page 672 - Rivets T.R.P. tted, see page 499
Facade application:
- Mechanical tting accessory specially designed for fastening facade panels to ensure the necessary
material expansion
Cross references :
Cordless ACCUBIRD riveter (code 273 450), see page 675 - LR 5 riveter (code 273 330), see page 672
LR 20 riveter (code 273 325), see page 672
Supplied with four tips for 2.4 / 3.2 / 4.0 / 4.8 mm rivets
The collector on this riveting set will provide a work environment clean and safe
Cross references :
Rivets, unsealed, see page 193 - Rivets, sealed, see page 187
Supplied with four tips for 3.2 / 4.0 / 4.8 / 6.4 mm rivets
The collector attached to this riveter will ensure a clean and safe working environment
Cross references :
Rivets T.R.P. tted, see page 499 - Rivets T.R.P. 6.4 mm, see page 192
Rivets, unsealed, see page 193 - Rivets, sealed, see page 187 - Rivets, Bulb-tite 5.2 mm, see page 190
CORDLESS RIVETER FOR FASTENING R.E.R. 4,8 - T.R.P. 6,3 AND STITCHING
RIVET
CORDLESS RIVETER - 14.4 VOLTS - 2.6 AH LI-ION
POWERBIRD
Cross references :
Fast charger (code 273 453), see page 675 - Rivets R.E.R., see page 491
Rivets T.R.P. tted, see page 499 - Rivets T.R.P. 6.4 mm, see page 192
Rivets, unsealed, see page 193 - Rivets, sealed, see page 187 - Rivets, Bulb-tite 5.2 mm, see page 190
Pack. Code
1 273 458
SPARE JAWS
POWERBIRD JAW
Pack. Code
Set of 3 jaws 273 456
SPARE BATTERY, 14.4 VOLT - 2.6 AH LI-ION SPARE BATTERY ESSENTIAL FOR CONTINUOUS
WORK
POWERBIRD BATTERY
CORDLESS RIVETER FOR FASTENING R.E.R. 4.8 DIAMETER AND STITCHING RIVETS
CORDLESS RIVETER - 14.4 VOLTS - 1.3 AH LI-ION
ACCUBIRD
Cross references :
Rivets R.E.R., see page 491 - Rivets, unsealed, see page 193 - Rivets, sealed, see page 187
SPARE JAWS
ACCUBIRD JAW
Pack. Code
Set of 3 jaws 273 452
For use with compressor from 50 to 100 liters - Pressure 6 Bar (85 PSI)
Fitted with a quick release for an 8 mm hose + male nipple + one open nut + clamp
Supplied with four tips for rivet diameters from 2.4 to 4.8 mm
Cross references :
Set of three replacement jaws (code 273 350), voir page 672 - Rivets R.E.R., see page 491
Rivets, unsealed, see page 193 - Rivets, sealed, see page 187
PLIERS KJ 28
Pack. Code
1 271 506
Supplied with chucks and anvils for Zn / Stainless / Aluminum M4 to M10 inserts and M5 to M8 threaded
inserts
Cross references :
Tapped inserts, see page 197 - Threaded inserts, see page 199
Supplied with chucks and anvils for threaded Zn / Alu M4 to M12 and Stainless M4 to M10 inserts
Spare parts to add: Pullers for M5 to M8 threaded inserts
Cross references :
Tapped inserts, see page 197 - Threaded inserts, see page 199
Assembly tool designed for rapid attachment bolt crimp BOXBOLT. This tool holding the collar of the shell
expansion, so as to prevent rotation while allowing the internal drive mechanism to tighten the bolt.
The inner part of the bolt pulls the cone to the outside of the body split by removing the strips of the shell
expansion.
It does not require the use of two different tools for the implementation of a BOXBOLT, simplifying installation
and reducing the risk of accidents.
Cross references :
BOXBOLT crimped bolt / SS A4, see page 200 - BOXBOLT crimped bolt / Zn, see page 200
BOXBOLT crimped bolt / Galv., see page 200
Technical characteristics:
- Power: 670 W. - No load speed: 0 - 2,700 rpm - Impact power: 2 J EPTA - Impact frequency: 0 -
4,500 ipm - Drilling capacity: Concrete 20 mm / Wood 13 mm / Steel 30 mm - Perforation vibration level:
12 m/s - Acoustic Pressure / Power: 90 / 101 dB(A) - Weight: 1.9 Kg
Model PLH 20, supplied with:
- Carry case + Additional handle + Depth stop + Cable: 4 meters
Strong points:
- Incomparable drilling speed: Up to 50% faster (2,700 rpm - 4,500 ipm - 2 J)
- Optimum user safety and comfort: Declutching, Softgrip coating, 10.2 m/s thanks to the AVS system
- Category leading durability, 5 times longer: Integrated Metal Block (IMB) technology, motor protector,
magnesium casing
- Perfectly suited to serial anchor tting at heights: Specially designed for drilling 5 to 12 mm holes
- Small footprint: 1.9 kg and 266 mm
- Dual mode selector: Drilling / Screwdriver, Perforating
Cross references :
Concrete drill bits, SDS+ 2 cutting models, see page 680
Concrete drill bits, SDS+ 4 cutting models, see page 683
Technical characteristics:
- Power: 725 W. - No load speed: 0 - 2,500 rpm - Impact power: 2.4 J EPTA - Impact frequency: 0 -
4,500 ipm - Drilling capacity: Concrete 26 mm / Wood 30 mm / Steel 13 mm - Vibration level 3 axes:
13.5 m/s - Weight: 2.6 Kg
Model PH 26 X, supplied with:
- Carry case + Additional handle + Depth stop + Auto chuck 13 mm + FIXTEC adapter
Strong points:
- Unmatched drilling speed up to 32% faster: Striker oversized providing an impact energy of 2.4 Joules
and powerful engine of 725 W.
- Safety and comfort of the user optimum : disengagement, Softgrip, lower vibration level of the class
thanks to AVS system
- Durability of the class: lasts up to 5 times longer with technology integrated metal block (IMB)
- 4-in-1: Penetrate the concrete, drill and screw into the wood and metal, occasional chipping: Rotation
stop, stop typing
- Reversibility
- FIXTEC system: Quick change tool holder
Cross references :
Concrete drill bits, SDS+ 2 cutting models, see page 680
Concrete drill bits, SDS+ 4 cutting models, see page 683
Cross references :
Perforator - Chipper PH 26 X, see page 678 - Perforator - Chipper HD28 HX, see page 679
Technical characteristics:
- Voltage / Amperage 28V / 3.0 Ah Red Lithium - No load speed: 0 - 1,400 rpm - Max. drilling capacity:
Concrete 26 mm / Wood 30 mm / Steel 13 mm - Impact power: 2.8 J EPTA - Impact rate:
0 - 4,500 ipm - Weight with battery: 4.3 kg
Model HD28 HX - 32C, supplied with:
- Carry case + Two 28V - 3.0 Ah batteries + Charger + Automatic 13 mm chuck + FIXTEC / x 20
adapter
Model HD28 HX - 0, shipped bare carton without battery
Cross references :
Concrete drill bits SDS Plus, see page 680
Battery M28 BX, see page 700 - Charger M28 C, see page 700
Cross references :
HEMA anchors, see page 238 - BETOFAST FM-CLK screws, see page 241
EXPANS-ISO SHANK
SDS-plus
10 Pack. Code
1 343 540
Cross reference :
METAL-ISO anchors, see page 278
Cross references :
Hammer drill - Anchor tter PLH 20, see page 678 - Perforator - Chipper PH 26 X, see page 678
Perforator - Chipper HD28 HX 32C, see page 679
Cross references :
Hammer drill - Anchor tter PLH 20, see page 678 - Perforator - Chipper PH 26 X, see page 678
Perforator - Chipper HD28 HX 32C, see page 679
L.T.
L.U.
Lg.
Lg.
Lg.
L : Length
Lg.
Lg.
L : Length
Cross references :
PDE 13 RX drill, see page 667 - HD18 PD cordless drill, see page 667
Technical characteristics:
- Power: 2,100 W. - Speed, no load: 6,600 rpm - Shaft thread: M14 - Disk diameter: 230 mm - Max.
cutting depth: 68 mm - Acoustic Pressure / Power: 94 / 102 dB(A) - Vibration level: 4.5 m/s - Weight:
5.4 Kg
Model AG 21-230 K DMS, supplied with:
- Carry case + Additional handle + Flask + FIXTEC nut + Protective cover
Strong points:
- Cut and grind all kinds of materials: 2,100 W.
- Perfect ergonomics: protective cover adjustable without tools - Spindle lock: for a quick change keyless
drive
- Durability awless: Motor protected by epoxy resin
- Electronic switch Dead Man
Cross references :
Resin disks, GLR, see page 691 - Diamond disks, GLR, see page 692
Technical characteristics:
- Power: 1,100 W. - Speed, no load: 10,000 rpm. - Shaft thread: M14 - Disk diameter: 125 mm - Max. cut
depth: 33.4 mm - Weight: 2.2 Kg
Model AG 11-125X, supplied with:
- Supplied in a box with a FIXTEC nut + Side handle + Flange
Strong points:
- Allows all kinds of grinding and cutting work, regardless of the materials worked: Powerful and compact
1,100 W grinder
- Flawless durability: Motor is epoxy resin protected and deectors tted
- Perfect visibility of the work area: Carter gear metal at
- Exceptional ease of use and working comfort: Three position AVS handle, keyless movable casing,
FIXTEC fast clamping nut
- Shaft Lock function: For fast keyless of disk replacement
Cross references :
Resin disks, GLR, see page 691 - Diamond disks, GLR, see page 692
FIXTEC NUT FOR FAST AND KEYLESS 125 TO 150 MM DISK REPLACEMENT
FIXTEC M14 nut
Grinder
Shaft thread Pack. Code
M 14 1 322 930
Can be used with AG 11-125X or HD18 AG-0 or HD28 AG-0 angle grinders
Cross references :
Angle grinder, AG 11-125X, see page 689 - Angle grinder, HD18 AG, see page 690
Angle grinder, HD28 AG, see page 690
Technical characteristics:
- Voltage / Amperage: 18 Volts / 3.0 Ah - Speed, no load: 8,000 rpm. - Shaft thread: M14 - Disk diameter:
115 mm - Weight with battery: 2.2 Kg
Model HD18 AG - 32C, supplied with:
- Carry case + Two 18V 3.0 Ah batteries + 1 hour fast charger + AVS additional handle + Flange + Nut +
Casing
Model HD18 AG - 0, supplied bare in a box without a battery
Strong points:
- Cut everything, anywhere, without limitations: 18V, 3.0 Ah Red Lithium, 4-pole motor
- Perfect ease of use, even with gloves: Additional bi-matierial handle, Softgrip coating, two-nger switch,
keyless case
- Optimal security: Protection against overload, dead man switch
- Perfect work area visibility: Flat shaped metal gear casing.
- Optimum working comfort: Perfect balance, 2.2 Kg
Cross references :
Resin disks, GLR, see page 691 - Diamond disks, GLR, see page 692 - Battery M18 BX, see page 700
Charger C18 C, see page 700
Technical characteristics:
- Voltage / Amperage: 28 Volts / 3.0 Ah Lithium-Ion - Speed, no load: 9,000 rpm. - Shaft thread: M14
- Disk diameter: 115 mm - Weight with battery: 2.8 Kg
Model HD28 AG - 32C, supplied with:
- Carry case + Two 18V 3.0 Ah batteries + 1 hour fast charger + AVS additional handle + Flange +
FIXTEC nut + Casing
Model HD28 AG - 0, supplied bare in a box without a battery
- AVS additional handle + Flange + FIXTEC nut + Casing
Strong points:
- The most powerful cordless grinder and with the greatest autonmy on the market !
- New overload protection
- Lithium-Ion 28 Volt 3.0 Ah battery: Revolutionary technology offering 2.5x more endurance than an 18V
battery (for the same weight), more power, constant energy levels from start to nish, a wider range of
operating temperatures (-20C to +75C), eco-friendly and with no memory effect for performance
never achieved by a cordless tool!
- Easy to use switch for both left and right handed users with LLO anti-accidental restart function
- FIXTEC: For changing disks without a key
- Shaftlock for easy disk replacement
Typical applications:
- Cutting ceramic tile, roof tile, slate
- Cutting steel of all types - Irons, chutes, pipes
- Grinding and smoothing (occasionally)
Cross references :
Resin disks, GLR, see page 691 - Diamond disks, GLR, see page 692 - Battery M28 BX, see page 700
Charger M28 C, see page 700
Cross references :
Angle grinder, AG 11-125X, see page 689 - Angle grinder, AG 21-230 K DMS, see page 689
Angle grinder, HD18 AG, see page 690 - Angle grinder, HD28 AG, see page 690
Bore 22.23 mm
EN 12413 - OSA 10634
Thick
Cross references :
Angle grinder, AG 11-125X, see page 689 - Angle grinder, AG 21-230 K DMS, see page 689
Angle grinder, HD18 AG, see page 690 - Angle grinder, HD28 AG, see page 690
Thick
Cross reference :
Angle grinder, AG 11-125X, see page 689
Bore 22.23 mm
EN 12413 - OSA 10634
Thick
Cross references :
Angle grinder, AG 11-125X, see page 689 - Angle grinder, AG 21-230 K DMS, see page 689
Angle grinder, HD18 AG, see page 690 - Angle grinder, HD28 AG, see page 690
Cross references :
Angle grinder, AG 11-125X, see page 689 - Angle grinder, AG 21-230 K DMS, see page 689
Angle grinder, HD18 AG, see page 690 - Angle grinder, HD28 AG, see page 690
Materials: Heavy concretes - Concretes washed - Lightweight concretes - Pavers - Bricks - Sandstone
Bore 22.23 mm
EN 13236 - OSA 12891
Cross references :
Angle grinder, AG 11-125X, see page 689 - Angle grinder, AG 21-230 K DMS, see page 689
Angle grinder, HD18 AG, see page 690 - Angle grinder, HD28 AG, see page 690
Cross references :
Angle grinder, AG 11-125X, see page 689 - Angle grinder, AG 21-230 K DMS, see page 689
Cross references :
Angle grinder, AG 11-125X, see page 689 - Angle grinder, AG 21-230 K DMS, see page 689
Cross references :
Angle grinder, AG 11-125X, see page 689 - Angle grinder, AG 21-230 K DMS, see page 689
Construction materials: Cellular concrete, lightweight aggregate concrete, brick, high density concrete,
washed gravel, tiles, paving stones, concrete blocks
Natural stone: Slate, travertin, limestone, sandstone
Use on masonry saws up (wet cutting)
Bore 25.4 mm
EN 13236 - OSA 12891
Technical characteristics:
- Power consumption: 500 W. - Cutting rate: 1.3 m/min. - No load, strokes: 1.200 spm - Cutting capacity:
2 mm steel = 400 N/mm / 1.5 mm steel = 600 N/mm / 1 mm steel = 800 N/mm - Aluminum sheet
capacity: 2.5 mm - Min. cutting radius: 4 mm - Weight: 1.8 Kg
Model N 2 Q supplied with:
- 4 m cord + Four-sided blade + Hand protection + Thickness gauge + Key
Strong points:
- Easy to use 500 W nibbler.
- For clean, burrless cutting
- Perfectly suited to close radius cutting of at or corrugated steel sheet
- Punch can be aimed through 90
- Special matrix: Designed for cutting corrugated steel sheet, max. cutting capacity: 1.5 mm
Technical characteristics:
- Power consumption: 350 W. - Effective power: 210 W. - Strokes: 1,800 spm - Cutting rate: 2.3 m/mn
- Cutting capacity: 1.3 mm steel = 400 N/mm / 0.8 mm steel = 600 N/mm / 0.6 mm steel = 800 N/mm
- Cable with plug: 5 m - Weight: 1.75 Kg
Model BLK 1.3 T supplied with:
- 1 punch + 1 matrix for trapezoid panels
Technical characteristics:
- Power: 1,900 W. - Speed, no load: 5,800 rpm - Cutting capacity 90 / 45: 0 - 65 / 0 - 52 mm - Blade
dimensions: 190 / 30 mm - Weight: 5.5 Kg
Model SCS 65 Q, supplied with:
- Carry case + Parallel guide + One 20 tooth blade
Strong points:
- Powerful 1,900 W circular saw, lightweight and robust, designed for intensive building site work
- Compact, balanced and easy to use with its TILT-LOK handle that adjusts through eight different
positions for enhanced comfort and to suit every working position
- Precisely adjustable cutting depth down to 65 mm (at 90)
- Safety: Automatic protection cover
- Excellent cutting line visibility
- Can connect to a vacuum system
- QuikLok cable: For fast replacement or extension up to 10 meters
Cross reference :
Saw blades, 190 mm, see page 697
Technical characteristics:
- Power: 1,500 W. - No load speed: 4,000 rpm - Max. cutting capacity, steel: 6 mm - Max. cutting depth
at 90: 65 mm - Blade dimensions: 203 / 16 mm - Weight: 5.7 Kg
Model MCS 65, supplied with:
- Carry case + One 42 tooth blade
Strong points:
- Powerful 1,500 W metal saw
- Dry cutting technology (no lubrication needed): Fast, clean and burr-free
- No chip clearance: almost full recovery in the housing
- Recommended for cutting steel, stainless, aluminum and sandwich panel insulation
- Allows cutting down
- Fast closing system: To replace the blade in just a few seconds or empty out chips
Cross reference :
Metal saw blades, 203 mm, see page 698
Technical characteristics:
- Voltage / Amperage: 18 Volts / 3.0 Ah Lithium-Ion - No load speed: 3,500 rpm - Max. cutting capacity
at 90 / 45: 0 - 55 / 0 - 39 mm - Cutting angle: Up to 50 - Blade dimensions: 165 / 15.87 mm - Weight
with battery: 3.8 Kg
Model HD18 CS - 32C, supplied with:
- Carry case + Two 18V 3.0 Ah batteries + 1 hour fast charger
Model HD18 CS - 0, supplied bare in a box without a battery
Strong points:
- Combines powers, lightweight and endurance: New 18V compact lithium-Ion technology, 3.0 Ah
compact and lightweight batteries
- Multi-purpose for all kinds of wood and types of cutting work: 3,500 rpm, 39 Nm torque, 55 mm cutting
capacity at 90, cutting angles of up to 50
- Durability to withstand anything: Protection against overloading, aluminum sole, magnesium case
- Exceptional ease of use: Softgrip, ideal handle positioning
Cross references :
Saw blades, 165 mm, see page 697 - Battery M18 BX, see page 700 - Charger C18 C, see page 700
METAL CIRCULAR SAW FOR 174 MM BLADE - CORDLESS 3,0 AH RED LITHIUM - 28V
HD28 MS
METAL CIRCULAR SAW
Model Ampere / Hours Weight with battery Pack. Code
HD28 MS - 32C 3,0 Ah 4,2 Kg 1 322 630
Technical characteristics:
- Voltage / Amperage: 28 Volts / 3.0 Ah Lithium-Ion - Speed, no load: 3,200 rpm - Max. cutting capacity
at 90: 61 mm - Cutting angle: Up to 50 - Blade dimensions: 174 / 20 mm - Weight with battery: 4.2 Kg
Model HD28 MS - 32C, supplied with:
- Carry case + Two 28V 3.0 Ah batteries + 1h fast charger + One 36 tooth blade
Model HD28 MS - 0, supplied bare in a box without a battery
Strong points:
- Lithium-Ion 28 Volt 3.0 Ah battery: Revolutionary technology offering 2.5x more endurance than an 18V
battery (for the same weight), more power, constant energy levels from start to nish, a wider range of
operating temperatures (-20C to +75C), eco-friendly and with no memory effect for performance
never achieved by a cordless tool!
- Motor 28 Volt high performance. Speed: 3,200 rpm
- Charge indicator: At any time you can know the state of the battery charge
- Safety switch to guard against unexpected start up
- Electric brake to instantly stop the blade
- Easy to use handle with SoftGrip coating for enhanced comfort and better feel
- Shaftlock for easy blade replacement
- LED lighting provided for the cutting area for perfect visibility
Cross references :
Metal saw blades 174 mm, see page 697 - Battery M28 BX, see page 700
Charger M28 C, see page 700
Bore 30 mm
Cross reference :
Circular saw, HD18 CS, see page 696
Bore 20 mm
Cut width: 1.65 mm
Clean cuts, tooth design reduces the nishing work required
Cut material can be held immediately after cutting
Faster than any other conventional cutting method
Cutting costs less that with abrasive disks
Less noise
Less vibration
Total safety: No sparks, no need for cooling liquid, cold to touch
Cross reference :
Circular saw, HD28 MS, see page 696
Bore 30 mm
Cross reference :
Circular saw, SCS 65 Q, see page 695
Bore 15.87 mm
Cut width: 1.8 mm
Clean cuts, tooth design reduces the nishing work required
Cut material can be held immediately after cutting
Faster than any other conventional cutting method
Cutting costs less that with abrasive disks
Less noise
Less vibration
Total safety: No sparks, no need for cooling liquid, cold to touch
Cross reference :
Circular saw, MCS 65, see page 695
Technical characteristics:
- Voltage / Amperage: 18 Volts / 3.0 Ah Lithium-Ion - No load speed: 0 - 3.000 spm - Stroke: 20 mm
- Weight inc. battery: 1.9 Kg
Model C18 HZ - 32C, supplied with:
- Carry bag + two 18V 3.0 Ah batteries + Fast 1 hour charger
Model C18 HZ - 0, supplied alone in a box without any battery
Strong points:
- Combine power, lightweight and endurance: New 18V lithium-Ion compact 3.0 Ah lightweight batteries
- Cut anything, everywhere, with one hand, even in conned areas: Only 375 mm long, 1.9 Kg weight,
20 mm stroke
- Cut out all types of materials quickly: Universal blade holder, 3,000 spm
- For precise and clean work, perfect control: Variable speed trigger control
- Exceptional durability: Steel mechanism, overload protection
- FIXTEC clamp for fast keyless blade change
- Softgrip comfortable grip for perfect feel
Cross references :
Battery M18 BX, see page 700 - Charger C18 C, see page 700
Cross references :
Power screwdriver HD18 HIW, see page 657 - Percussion drill HD18 PD, see page 667
Grinder HD18 AG, see page 690 - Circular saw HD18 CS, see page 696
Reciprocating saw C18 HZ, see page 699 - Mastic gun 18V C18 PCG, see page 703
Cross references :
Perforator - Chipper HD28 HX, see page 679 - Grinder HD28 AG-0, see page 690
Metal circular saw HD28 MS-0, see page 696
Cross reference :
CHIMFORT HA chemical anchoring system, see page 271
Cross references :
CHIMFORT GREEN chemical anchoring, see page 264 - CHIMFORT ATE, see page 268
Cross references :
CHIMFORT GREEN chemical anchoring, see page 264 - CHIMFORT ATE, see page 268
Mastic cartridge, see page 450
Standard equipment:
- Carry case + 1 gun + 2 batteries 10.8V Li-Ion + 1 battery charger (60 minute charge time)
Cross references :
CHIMFORT GREEN chemical anchoring, see page 264 - CHIMFORT ATE, see page 268
BRUSHES
BLOWER PUMP
Plastic
BLOWER PUMP
Pack. Code
1 344 854
Pump for blowing away the last remaining dust after brushing with a brush.
Technical characteristics:
- Voltage / Amperage: 18 Volts / 1.5 Ah Red-Lithium-Ion - Pushing force: 4,500 Nm - Cartridge holder:
Open for 310 ml cartridge - Weight inc. battery: 3.24 Kg
Model C18 PCG / 310C-21B, supplied with:
- Carry bag + One 18V 1.5 Ah batteries + Fast charger
Strong points:
- Power and High Performance: Thrust force of 4,500 Nm, for the purposes of silicones, sealants -
Work qualitative
- Lithium Ion technology Red-18v: 40% and 20% self Speed
- Anti-drip device: Automatic, for precise work
- Wheel drive + screening: For precise control and constant ow of silicone based 6 speed modes
- New internal piston: For a constant ow at high speed
- Lightness and autonomy: Compatible with M18 Batteries 1.5 Ah and 3.0 Ah
- Softgrip comfortable grip for perfect feel
Cross references :
Battery M18 BX, see page 700 - Charger C18 C, see page 700
LIGHT GUN
Cross reference :
Mastic cartridge, see page 450
Cross reference :
Mastic cartridge, see page 450
Measures and checks fastening resistance on-site: screws, anchors, nails, rivets from 4 to 12 mm diameters
Classe 1 precision - Precision 1% - Maximum load: 1,600 daN - Reading unit: 20 daN - Appliance weight
without its case: 3,600 kg
Used with the ring case (code 605 280), see below
Transportation case comprising:
- A complete extractometer with four spoke wheel + 1 carry handle + 1 fall prevention strap + 1 calibration
report
Advantages:
- Quick and easy to use - Lightweight and easy to handle - Tripod mounted alumnium table - Extraction
performed with the four spoke wheel - Readings taken from a needle indicator - Maximum value
memory - Supplied in a case with a calibration certicate.
On request: 500 - 1,000 or 2,500 daN pull testers
Pack. Code
1 605 280
Case comprising:
- Ring diameters: 6 - 8 - 10 & 12 mm - Four male rings, four threaded rings, four split rings.
Used to measure and control on-site resistance of fasteners: Screws, anchors, nails, rivets with diameters of
4 to 12 mm
FASTENERS
Fasteners, anchors and ancillaries for
Cladding - Roofing - Waterproofing - Solar - Wood range...
OVER-ROOFING
Over-roofing systems using parallel beam for new building or renovation projects.
SAFETY
Personal protection systems against falls.
FACADE
Cladding framework and processes for new build or renovation projects.
More than 15 technicians and engineers working on fastening systems, developing setting tools
and providing custom made solutions.
Five manufacturing facilities complying with a quality system or have achievment ISO 9001 version
2000 certification.
An internal audit takes place at every step in the manufacturing process guaranteeing quality
finished products.
The 25,000 sqm logistics center is located in France, at Aubergenville near Paris.
Test Report
ETANCO Group :
- head office
- 5 production facilities
- 8 European subsidiaries,
employing over 600 people
ETANCO Group
Subsidiaries
Reunion Island Belgium
R-FIX ETANCO Benelux
+ 0262 430 880 + 32 3 354 15 00
info@r-fix.com info@etanco.be
ETANCO is a member of :
www.affix.org
www.cisma.fr
www.etancheite.com
www.metal-pro.org
www.fim.net
www.groupement-mur-manteau.com
www.polebois.ffbatiment.fr
www.synamap.fr
TECHNICAL ASSISTANCE
Open from 08:30 to 12:00 and from 13:30 to 17:00 Monday to Friday
Test Report
ETANCO TRAINING
CENTER :
Supporting change
Training can support changes affecting a company. Training often requires a new approach to professional practices, changes
in working habits, discovering different ways of working.
Training is a place for confronting new ideas, exchanges, identifying new practices, learning new work practices, working
organisations, methods and tools, etc.
Training courses are a way to not miss out on certain innovations.
Regulations change, buildings change, requirements in terms of technical performance change and leave no room for force of
habit...
This is why Etanco offers customers a training program to suit the needs of your worksites.
Theoretical session:
Regulation knowledge (DTU, Technical approvals...), Le savoir-faire de nos experts au service des professionnels.
Practical session:
Applying the classroom content in real situations.
Taking the time to train your staff is giving your company the
means to stand out. Formation 2012
Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page
11 220 47 15 250 43 28 031 50 30 065 30 33 382 34 33 815 35 35 864 633 39 524 37 56 440 308 68 020 292
11 230 47 15 256 43 28 033 50 30 070 30 33 384 34 33 820 35 35 865 633 39 528 37 56 450 308 68 030 292
11 240 47 15 257 43 28 040 50 30 075 30 33 386 34 33 825 35 35 867 633 41 000 297 56 460 308 68 040 292
11 250 47 15 260 43 28 041 50 30 080 30 33 388 34 33 830 35 35 900 633 41 010 297 56 480 308 68 050 292
11 260 47 15 265 43 28 043 50 30 085 30 33 390 34 33 835 35 35 910 633 41 020 297 56 490 308 68 060 292
12 000 45 15 710 43 28 050 50 30 090 30 33 392 34 33 840 35 35 914 633 41 031 297 56 500 308 68 070 292
12 005 45 15 712 43 28 051 50 30 095 30 33 394 34 33 845 35 35 923 633 41 040 297 56 510 308 68 080 292
12 010 45 15 714 43 28 053 50 30 097 30 33 410 33 33 850 35 35 950 633 41 050 297 56 520 308 68 090 292
12 020 45 15 716 43 28 060 50 30 100 30 33 412 33 33 855 35 35 951 634 41 060 297 56 522 308 68 095 292
12 030 45 15 718 43 28 063 50 30 105 30 33 414 33 33 860 35 35 952 634 41 070 297 56 530 308 68 100 292
12 040 45 15 720 43 28 064 50 30 110 30 33 416 33 33 865 35 35 955 633 41 090 297 56 540 308 68 105 292
12 050 45 15 722 43 28 070 50 30 115 30 33 418 33 33 870 35 35 960 633 41 100 297 56 550 308 68 110 292
12 060 45 18 500 45 28 071 50 30 117 30 33 420 33 33 875 35 35 964 633 41 140 297 56 560 308 68 112 292
12 070 45 18 510 45 28 073 50 30 120 30 33 450 33 33 880 35 36 100 289 44 001 297 56 570 308 68 810 292
12 080 45 18 520 45 28 080 50 30 121 30 33 452 33 33 885 35 36 150 289 52 033 298 56 590 308 68 820 292
12 090 45 18 530 45 28 081 50 30 122 30 33 454 33 33 890 35 36 200 289 52 069 298 56 610 308 68 830 292
12 100 45 18 540 45 28 083 50 30 123 30 33 456 33 33 895 35 36 250 289 52 113 298 56 620 308 68 840 292
12 140 45 18 560 45 28 090 50 30 124 30 33 458 33 33 900 504 36 300 289 52 143 298 56 630 308 68 850 292
12 156 44 18 680 45 28 092 50 30 125 30 33 460 33 33 905 504 36 350 289 54 090 299 56 640 308 68 862 292
12 158 44 18 875 45 28 093 50 30 130 30 33 462 33 33 910 504 37 100 289 54 100 299 56 642 308 68 870 292
12 160 44 19 080 45 28 100 50 30 135 30 33 464 33 34 001 28 37 150 289 54 120 299 56 643 308 68 871 292
12 161 44 19 100 45 28 101 50 30 145 30 33 501 32 34 002 28 37 200 289 54 140 299 56 644 308 68 872 292
12 166 44 19 120 45 28 103 50 30 150 30 33 503 32 34 003 28 37 250 289 54 160 299 56 645 308 68 874 292
12 172 44 19 160 45 28 180 51 30 153 30 33 505 32 34 004 28 37 300 289 54 170 299 56 650 308 68 875 292
12 173 44 19 240 45 28 181 51 30 157 30 33 507 32 34 005 28 37 350 289 54 180 299 56 660 308 68 876 292
12 175 44 19 260 45 28 190 51 30 165 30 33 510 32 34 006 28 37 400 289 54 190 299 56 670 308 69 054 554
12 176 44 19 300 45 28 191 51 30 167 30 33 512 32 34 007 28 38 150 288 54 500 299 56 690 308 69 055 554
12 178 44 19 320 45 28 193 51 30 168 30 33 514 32 34 008 28 38 200 288 54 505 300 56 710 308 69 058 554
12 180 45 19 340 45 28 194 51 30 170 30 33 516 32 34 009 28 38 250 288 54 540 299 56 740 308 69 060 554
12 184 44 19 490 45 28 200 51 30 172 30 33 518 32 34 010 28 38 300 288 54 560 299 56 750 308 69 204 307
12 190 44 19 510 45 28 201 51 30 176 30 33 520 32 34 011 28 38 350 288 54 570 299 56 770 308 69 277 307
12 191 44 19 530 45 28 203 51 30 180 30 33 522 32 34 012 28 38 400 288 54 580 299 56 780 308 69 280 307
12 196 44 19 550 45 28 204 51 30 185 30 33 562 25 34 013 28 38 450 288 54 590 299 56 790 308 69 288 307
12 220 45 19 570 45 29 308 51 30 190 30 33 567 25 34 014 28 39 411 37 54 600 299 56 830 308 69 289 307
12 240 45 19 590 45 29 312 51 30 195 30 33 568 25 34 015 28 39 413 37 54 610 299 56 840 308 69 290 307
12 250 45 19 610 45 29 314 51 30 197 30 33 569 25 34 016 28 39 414 37 54 620 299 56 890 308 69 295 307
12 260 45 19 625 45 29 316 51 30 200 30 33 570 25 34 017 28 39 415 37 54 630 299 56 940 308 69 296 307
12 270 45 19 630 45 29 318 51 30 330 27 33 571 25 34 498 41 39 417 37 54 650 299 56 970 308 69 297 307
12 280 45 19 635 45 29 322 51 32 150 288 33 573 25 34 500 41 39 420 37 54 680 299 56 990 308 69 300 307
12 290 45 19 802 43 29 324 51 32 200 288 33 574 25 34 502 41 39 423 37 54 690 299 57 010 308 69 302 307
12 340 45 21 990 47 29 326 51 32 250 288 33 575 25 34 504 41 39 424 37 54 695 299 57 060 308 69 303 307
12 360 45 22 050 47 29 328 51 32 300 288 33 576 25 34 506 41 39 425 37 54 720 299 57 090 308 69 304 307
12 370 45 22 070 47 29 330 51 32 350 288 33 580 26 34 508 41 39 426 37 54 760 299 57 130 308 69 305 307
12 380 45 22 080 47 29 334 51 32 400 288 33 581 26 34 510 41 39 427 37 54 770 299 57 140 308 69 311 307
12 400 45 22 082 47 29 338 51 32 450 288 33 582 26 34 512 41 39 429 37 54 780 299 57 142 308 69 312 307
12 410 45 24 857 29 29 340 51 33 020 30 33 583 26 34 514 41 39 433 37 54 790 299 57 145 308 69 330 307
12 420 45 24 858 29 29 342 51 33 050 30 33 584 26 34 516 41 39 435 37 54 800 299 57 150 308 69 335 307
12 430 45 24 877 29 29 610 50 33 107 24 33 585 25 34 520 41 39 437 37 54 810 299 59 400 303 69 336 307
12 440 45 24 878 29 29 620 50 33 108 24 33 586 25 34 522 41 39 439 37 54 820 299 59 401 303 69 337 307
12 450 45 25 390 39 29 630 50 33 117 24 33 587 25 34 524 41 39 441 37 54 830 299 59 402 303 69 338 307
12 610 44 25 400 39 29 640 50 33 118 24 33 588 25 34 526 41 39 443 37 54 850 299 59 404 303 69 339 307
12 611 44 25 410 39 29 650 50 33 120 78 33 589 25 34 528 41 39 444 37 54 860 299 59 406 303 69 340 307
12 612 44 25 420 39 29 660 50 33 121 78 33 590 25 34 530 41 39 445 37 54 871 299 59 408 303 69 341 307
12 639 44 25 425 39 29 700 49 33 132 24 33 591 25 34 532 41 39 446 37 54 880 299 59 410 303 69 342 307
12 650 44 25 450 39 29 701 49 33 144 24 33 592 25 34 534 41 39 447 37 54 891 299 59 412 303 69 345 307
12 651 44 25 460 39 29 702 49 33 146 24 33 593 25 34 536 41 39 450 37 54 894 299 59 414 303 69 347 306
12 656 44 25 465 39 29 710 49 33 147 24 33 594 25 34 538 41 39 451 37 54 895 299 59 416 303 69 350 307
12 680 44 25 500 39 29 711 49 33 148 24 33 620 35 34 540 41 39 453 37 54 899 299 59 418 303 69 351 306
12 681 44 25 502 31 29 712 49 33 149 24 33 625 35 34 542 41 39 454 37 54 904 299 59 420 303 69 357 307
12 686 44 25 510 39 29 783 48 33 310 34 33 630 35 34 544 41 39 462 37 54 946 299 59 422 303 69 358 307
12 690 44 25 520 39 29 797 49 33 312 34 33 635 35 34 546 41 39 463 37 54 949 299 59 424 303 69 361 307
12 691 44 25 560 39 29 798 48 33 314 34 33 640 35 34 548 41 39 464 37 54 950 299 59 426 303 69 362 307
12 696 44 25 570 39 29 799 48 33 316 34 33 645 35 34 550 41 39 465 37 54 960 299 59 428 303 69 363 307
12 730 44 25 575 39 29 800 49 33 318 34 33 650 35 34 552 41 39 466 37 54 970 299 59 430 303 69 365 307
12 731 44 25 580 39 29 840 48 33 320 34 33 655 35 34 560 41 39 467 37 54 980 299 59 434 303 69 367 307
12 736 44 25 585 39 29 843 48 33 322 34 33 660 35 34 562 41 39 469 37 54 990 299 59 436 303 69 368 307
12 740 44 25 590 39 29 845 48 33 324 34 33 665 35 34 564 41 39 470 37 54 995 299 59 438 303 69 370 307
12 741 44 25 644 40 29 849 48 33 326 34 33 670 35 34 566 41 39 481 37 55 000 299 59 440 303 69 371 307
12 746 44 25 646 40 29 853 48 33 328 34 33 675 35 34 568 41 39 483 37 55 010 299 59 442 303 69 372 307
12 750 44 25 648 40 29 857 48 33 330 34 33 720 35 34 570 41 39 484 37 55 020 299 59 444 303 69 373 307
12 751 44 25 650 40 29 858 48 33 332 34 33 725 35 34 572 41 39 485 37 55 030 299 59 446 303 69 374 307
12 756 44 25 652 40 29 880 48 33 334 34 33 730 35 34 574 41 39 486 37 55 040 299 59 448 303 69 375 307
13 180 45 25 655 40 29 881 48 33 336 34 33 735 35 34 576 41 39 487 37 55 045 299 59 452 303 69 376 307
13 190 45 25 657 40 29 900 51 33 338 34 33 740 35 34 578 41 39 489 37 55 050 299 59 454 303 69 377 307
13 196 45 25 680 40 29 902 51 33 340 34 33 745 35 34 580 41 39 490 37 55 060 299 59 456 303 69 378 307
13 210 45 25 682 40 30 000 30 33 342 34 33 750 35 34 582 41 39 491 37 55 580 548 59 458 303 69 382 307
13 216 45 25 684 40 30 005 30 33 344 34 33 755 35 34 584 41 39 492 37 56 120 308 59 460 303 69 386 306
13 220 45 25 686 40 30 010 30 33 360 34 33 760 35 34 586 41 39 493 37 56 130 308 59 462 303 69 388 307
13 226 45 25 688 40 30 015 30 33 362 34 33 765 35 34 588 41 39 502 37 56 140 308 59 464 303 69 390 306
13 230 45 25 690 40 30 020 30 33 364 34 33 770 35 34 590 41 39 504 37 56 150 308 59 466 303 69 394 306
13 240 45 25 692 40 30 025 30 33 366 34 33 775 35 34 592 41 39 506 37 56 160 308 59 468 303 69 400 307
15 220 43 28 010 50 30 030 30 33 368 34 33 780 35 35 150 288 39 508 37 56 180 308 59 470 303 69 402 307
15 230 43 28 011 50 30 035 30 33 370 34 33 785 35 35 200 288 39 510 37 56 220 308 59 472 303 69 456 307
15 234 43 28 013 50 30 040 30 33 372 34 33 790 35 35 250 288 39 512 37 56 390 308 59 474 303 69 458 307
15 238 43 28 020 50 30 045 30 33 374 34 33 795 35 35 300 288 39 514 37 56 400 308 59 476 303 69 459 307
15 240 43 28 022 50 30 050 30 33 376 34 33 800 35 35 350 288 39 516 37 56 410 308 59 478 303 69 480 307
15 244 43 28 023 50 30 055 30 33 378 34 33 805 35 35 400 288 39 520 37 56 420 308 59 519 303 69 482 307
15 245 43 28 030 50 30 060 30 33 380 34 33 810 35 35 450 288 39 522 37 56 430 308 68 010 292 69 484 307
Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page
69 485 307 71 939 503 110 450 379 111 380 379 113 060 350 170 184 586 174 560 290 188 270 385 218 840 527 230 425 512
69 486 307 71 995 503 110 452 379 111 382 379 113 075 350 170 188 586 174 570 290 188 280 387 218 861 217 230 430 512
69 487 307 71 998 503 110 453 376 111 383 376 113 080 379 170 189 586 174 580 290 188 282 387 218 870 239 230 435 512
69 488 307 72 300 373 110 459 376 111 430 371 113 090 350 170 190 587 174 700 290 188 284 387 218 871 213 230 440 512
69 489 307 73 000 503 110 460 378 111 431 371 113 092 350 170 191 282 175 590 290 188 286 386 218 872 239 230 445 512
69 490 307 73 010 503 110 461 378 111 491 320 113 101 334 170 192 282 175 600 290 188 290 388 218 873 213 230 447 512
69 500 306 73 110 503 110 500 322 111 530 371 113 110 334 170 193 583 175 605 290 188 292 388 218 874 213 230 449 512
69 502 306 73 125 503 110 510 322 111 531 371 113 111 334 170 194 583 175 610 290 188 294 388 218 875 213 230 450 512
69 504 306 73 130 503 110 515 322 111 600 322 113 112 334 170 197 282 175 612 290 188 306 386 218 876 213 230 455 512
69 506 306 73 140 503 110 520 377 111 610 322 113 400 322 170 201 576 175 615 290 188 325 394 218 877 213 230 456 512
69 508 306 73 150 503 110 530 322 111 612 322 113 401 354 170 202 576 175 620 290 188 330 394 218 878 213 230 457 512
69 510 306 73 155 503 110 531 322 111 620 322 113 402 354 170 203 576 175 640 290 188 335 394 218 902 524 230 458 512
69 512 306 73 160 503 110 533 322 111 630 322 113 403 322 170 204 576 175 660 290 188 337 394 218 904 524 230 459 512
69 514 306 73 170 503 110 744 322 111 631 322 113 404 322 170 210 572 175 820 290 188 340 394 221 110 310 230 695 48
69 516 306 73 180 503 110 745 322 111 632 322 128 000 381 170 211 572 180 005 581 188 345 394 221 120 310 230 700 48
69 518 306 73 705 504 110 746 322 112 070 352 128 020 381 170 212 572 180 010 581 188 350 389 221 130 310 230 710 48
69 520 306 73 715 504 110 747 322 112 090 352 128 094 380 170 213 572 180 020 581 188 351 389 221 140 310 230 711 48
69 522 306 73 717 504 110 748 371 112 091 352 128 095 380 170 229 577 180 100 566 188 355 390 221 160 310 230 712 48
69 524 306 73 719 504 110 749 322 112 093 352 128 096 380 170 237 580 180 101 566 188 360 390 221 402 525 230 740 48
69 525 306 76 205 503 110 750 318 112 094 352 128 100 381 170 310 400 180 104 566 188 365 391 221 410 525 230 750 48
69 526 306 77 000 504 110 760 318 112 100 379 128 101 381 170 324 572 180 106 566 188 370 391 227 060 485 230 822 514
69 527 306 81 000 372 110 761 318 112 110 379 128 102 380 170 325 572 180 107 568 188 375 393 227 070 485 230 824 514
69 528 306 81 010 372 110 764 334 112 111 376 128 120 381 170 326 576 180 110 566 188 380 394 227 080 485 230 832 514
69 529 306 81 020 371 110 765 318 112 121 350 128 121 381 170 327 576 180 111 566 188 382 394 227 090 485 230 895 513
69 530 306 81 021 371 110 767 324 112 123 350 128 125 380 170 351 400 180 121 567 188 383 394 227 100 485 230 900 513
69 540 306 81 024 371 110 770 318 112 125 348 128 126 380 170 431 399 180 122 567 188 385 394 227 110 485 230 903 513
69 541 306 81 030 370 110 773 322 112 127 348 128 200 381 170 451 400 180 123 567 188 390 393 227 120 485 230 906 513
69 542 306 81 050 369 110 775 322 112 128 348 128 220 381 170 510 401 180 124 567 188 530 395 227 130 485 230 909 513
69 543 306 81 100 372 110 776 322 112 129 379 128 222 380 170 520 401 180 135 567 188 531 395 227 140 485 230 914 513
69 550 304 81 105 369 110 777 322 112 130 348 133 010 400 170 530 401 180 136 567 188 532 395 227 150 485 230 950 514
69 552 304 81 110 372 110 778 322 112 131 354 133 020 400 170 540 401 180 140 567 188 533 395 227 160 485 230 954 514
69 554 304 81 111 369 110 779 322 112 135 350 170 050 588 170 550 401 180 141 567 188 540 396 227 170 485 230 956 514
69 556 304 81 120 371 110 780 318 112 139 350 170 051 588 170 560 401 180 145 567 188 541 396 227 180 485 231 002 463
69 863 307 81 130 370 110 781 318 112 140 354 170 055 590 170 600 402 180 146 567 188 542 396 227 190 485 231 004 463
70 010 356 82 100 374 110 782 318 112 141 354 170 056 590 170 630 292 180 150 567 188 543 396 227 200 485 231 006 463
70 013 356 82 110 374 110 920 324 112 142 354 170 057 590 170 634 554 180 151 567 188 600 397 227 210 485 231 008 463
70 018 369 82 150 374 110 930 324 112 143 354 170 058 590 170 635 554 180 163 568 188 605 397 227 220 485 231 012 462
70 020 373 82 160 374 110 970 324 112 145 376 170 064 590 170 638 554 180 165 569 188 606 397 227 230 485 231 014 462
70 030 372 82 200 374 110 975 324 112 150 322 170 070 589 170 651 399 180 166 569 188 620 388 227 240 485 231 016 462
70 110 356 82 210 374 110 976 324 112 159 322 170 071 589 170 661 399 180 167 569 188 621 388 227 250 485 231 018 462
70 111 356 91 700 447 110 980 324 112 160 322 170 080 588 170 671 399 180 168 569 188 631 389 227 260 485 231 102 463
70 120 373 91 720 447 111 030 378 112 480 372 170 081 588 170 681 399 180 169 569 218 015 215 227 270 485 231 104 463
70 121 373 91 750 447 111 031 378 112 490 372 170 090 589 170 690 399 180 170 567 218 017 215 227 280 485 231 106 463
70 210 370 91 800 447 111 032 376 112 510 320 170 091 589 170 691 399 180 174 568 218 019 215 227 290 485 231 108 463
70 230 356 91 850 447 111 100 318 112 512 320 170 092 590 170 720 292 180 176 567 218 040 214 227 300 485 231 112 462
70 310 356 92 000 446 111 101 318 112 513 320 170 094 590 170 732 292 180 179 567 218 060 214 227 330 485 231 114 462
70 312 356 92 001 446 111 102 324 112 520 320 170 096 590 170 830 292 180 185 568 218 070 214 227 350 485 231 116 462
70 314 356 92 002 446 111 103 324 112 522 320 170 098 590 170 860 301 180 188 568 218 080 214 228 060 486 231 118 462
70 316 356 92 003 446 111 104 318 112 571 324 170 100 571 170 862 301 180 285 568 218 090 214 228 070 486 232 060 483
70 450 356 92 010 446 111 105 318 112 572 320 170 101 571 170 864 301 180 451 568 218 120 214 228 080 486 232 070 483
71 235 503 92 011 446 111 106 318 112 573 320 170 102 571 170 900 291 180 460 569 218 130 214 228 090 486 232 080 483
71 275 503 92 012 446 111 107 318 112 600 320 170 103 571 170 905 291 181 010 398 218 150 214 228 100 486 232 090 483
71 280 503 92 013 446 111 108 324 112 602 369 170 104 577 170 910 291 181 020 398 218 203 214 228 110 486 232 100 483
71 289 503 92 020 446 111 115 322 112 610 320 170 105 577 171 000 401 181 030 398 218 206 214 228 120 486 232 110 483
71 291 503 92 021 446 111 116 322 112 612 320 170 106 577 171 005 401 181 040 398 218 208 214 228 130 486 232 120 483
71 293 503 92 022 446 111 117 322 112 620 320 170 107 578 171 010 401 181 050 398 218 210 214 228 140 486 232 130 483
71 294 503 92 023 446 111 120 320 112 690 354 170 108 578 171 015 401 181 060 398 218 212 214 228 150 486 232 140 483
71 297 503 92 030 446 111 121 320 112 730 354 170 109 578 171 020 401 188 006 384 218 213 214 228 160 486 232 150 483
71 300 503 92 031 446 111 122 320 112 731 354 170 110 579 171 025 401 188 011 384 218 214 214 228 170 486 232 160 483
71 306 503 92 032 446 111 125 318 112 733 354 170 111 576 171 030 401 188 021 384 218 216 214 228 180 486 232 170 483
71 307 503 92 033 446 111 126 318 112 800 342 170 112 576 171 050 402 188 031 384 218 230 212 228 190 486 232 180 483
71 482 503 92 040 446 111 127 318 112 802 377 170 113 576 171 055 402 188 041 384 218 231 212 228 200 486 232 190 483
71 830 503 92 041 446 111 130 334 112 810 342 170 114 576 171 060 402 188 051 384 218 232 212 228 210 486 232 200 483
71 855 503 92 042 446 111 131 334 112 811 342 170 130 575 171 065 402 188 061 384 218 233 212 228 220 486 232 210 483
71 860 503 92 043 446 111 132 334 112 830 342 170 131 575 171 070 402 188 071 384 218 234 212 228 230 486 232 220 483
71 865 503 110 180 318 111 147 352 112 831 342 170 132 575 171 100 401 188 081 384 218 235 212 228 240 486 232 230 483
71 866 503 110 181 318 111 148 352 112 870 334 170 134 575 171 105 401 188 091 384 218 236 212 228 250 486 232 240 483
71 867 503 110 190 318 111 149 352 112 871 334 170 140 585 171 110 401 188 111 385 218 237 212 228 260 486 232 250 483
71 870 503 110 194 318 111 156 322 112 872 334 170 141 585 171 115 401 188 121 385 218 238 212 228 270 486 232 260 483
71 873 503 110 200 318 111 157 322 112 873 334 170 142 573 171 120 401 188 131 385 218 239 212 228 280 486 232 270 483
71 874 503 110 220 318 111 158 322 112 875 322 170 143 573 171 125 401 188 141 385 218 241 212 228 290 486 232 280 483
71 875 503 110 230 318 111 190 348 112 878 334 170 144 573 171 130 401 188 151 385 218 250 217 228 300 486 232 290 483
71 876 503 110 291 372 111 191 348 112 900 362 170 145 573 171 200 402 188 161 385 218 300 282 228 330 486 232 300 483
71 878 503 110 300 322 111 192 348 112 910 362 170 146 576 171 210 402 188 171 385 218 400 216 228 350 486 232 310 483
71 882 503 110 310 322 111 300 318 112 911 362 170 147 576 171 220 402 188 181 385 218 402 216 230 360 512 232 320 483
71 884 503 110 315 322 111 310 318 112 920 362 170 155 582 171 230 402 188 191 385 218 404 216 230 362 512 232 330 483
71 885 503 110 323 371 111 320 318 112 930 352 170 160 582 171 240 402 188 200 392 218 406 216 230 364 512 232 340 483
71 888 503 110 324 322 111 330 318 112 931 352 170 163 574 174 470 290 188 201 392 218 408 216 230 366 512 232 350 483
71 890 503 110 325 322 111 331 318 112 932 352 170 165 574 174 480 290 188 202 392 218 410 216 230 368 512 232 360 483
71 905 503 110 326 322 111 332 318 112 933 352 170 167 574 174 500 290 188 203 392 218 412 216 230 370 512 232 370 483
71 906 503 110 327 369 111 333 350 113 001 350 170 169 574 174 507 290 188 204 392 218 414 216 230 372 512 232 380 483
71 920 503 110 330 322 111 335 350 113 002 350 170 171 574 174 508 290 188 205 392 218 416 216 230 374 512 232 390 483
71 921 503 110 331 322 111 360 322 113 005 350 170 173 574 174 510 290 188 206 392 218 425 216 230 376 512 232 400 483
71 923 503 110 340 322 111 361 322 113 012 350 170 175 574 174 520 290 188 207 392 218 520 526 230 400 512 232 410 483
71 924 503 110 391 378 111 362 376 113 018 379 170 177 574 174 530 290 188 208 392 218 560 526 230 402 512 232 420 483
71 926 503 110 393 340 111 365 322 113 020 350 170 180 584 174 532 290 188 209 392 218 810 527 230 410 512 232 430 483
71 935 503 110 394 340 111 366 322 113 021 350 170 182 584 174 540 290 188 210 392 218 820 527 230 415 512 232 440 483
71 937 503 110 395 340 111 367 322 113 022 350 170 183 586 174 550 290 188 250 384 218 830 527 230 420 512 232 450 483
Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page
233 060 481 239 805 526 245 210 488 257 230 476 271 031 497 271 552 198 273 595 186 275 210 193 276 041 491 276 660 236
233 070 481 239 808 526 245 220 488 257 240 476 271 032 497 271 553 198 273 597 186 275 211 193 276 055 493 276 685 236
233 080 481 239 970 526 245 230 488 257 250 476 271 033 497 271 554 198 273 600 188 275 215 194 276 056 493 276 687 236
233 090 481 240 435 666 245 240 488 257 260 476 271 035 497 271 555 198 273 620 188 275 220 193 276 060 193 276 690 236
233 100 481 240 436 666 245 250 488 257 270 476 271 036 497 271 560 198 273 625 188 275 221 193 276 062 193 276 695 236
233 110 481 240 440 666 245 260 488 257 280 476 271 037 497 271 561 198 273 630 188 275 230 193 276 066 491 276 697 236
233 120 481 240 441 666 245 270 488 257 290 476 271 038 497 271 562 198 273 740 191 275 231 193 276 067 491 276 900 187
233 130 481 240 445 666 245 280 488 257 300 476 271 040 497 271 563 198 273 741 191 275 240 193 276 070 193 276 940 189
233 140 481 240 485 666 245 290 488 257 310 476 271 041 497 271 564 198 273 775 191 275 241 193 276 073 193 276 941 189
233 150 481 240 487 666 245 300 488 257 320 476 271 045 497 271 570 199 273 776 191 275 245 193 276 075 193 276 942 189
233 160 481 240 489 666 245 310 488 257 330 476 271 046 497 271 571 199 273 780 191 275 246 193 276 080 491 276 943 189
233 170 481 240 491 666 249 060 487 257 340 476 271 050 497 271 572 199 273 781 191 275 250 193 276 081 491 276 944 189
233 180 481 240 493 666 249 070 487 257 350 476 271 051 497 271 575 199 273 800 191 275 251 193 276 085 493 276 945 189
233 190 481 240 495 666 249 080 487 257 360 476 271 055 497 271 576 199 273 801 191 275 300 193 276 086 493 276 946 189
233 200 481 240 497 666 249 090 487 257 370 476 271 056 497 271 577 199 273 810 191 275 301 193 276 093 193 276 947 189
233 210 481 240 499 666 249 100 487 257 380 476 271 060 497 271 580 199 273 811 191 275 345 493 276 095 491 276 960 189
233 220 481 240 500 465 249 110 487 257 390 476 271 061 497 271 581 199 273 815 191 275 346 493 276 096 491 276 961 189
233 230 481 240 505 465 249 120 487 257 400 476 271 065 497 271 590 676 273 816 191 275 350 193 276 114 493 276 962 189
233 240 481 240 510 465 249 130 487 257 410 476 271 066 497 271 591 676 273 820 191 275 351 193 276 120 491 276 963 189
233 250 481 240 515 465 249 140 487 257 420 476 271 070 497 271 592 676 273 821 191 275 395 493 276 121 491 276 964 189
233 260 481 240 520 465 249 150 487 257 430 476 271 071 497 272 025 495 273 830 191 275 396 493 276 122 493 276 965 189
233 270 481 240 525 465 249 160 487 257 440 476 271 075 497 272 026 495 273 831 191 275 400 193 276 123 493 277 350 499
233 280 481 240 550 464 249 170 487 257 450 476 271 076 497 272 030 495 273 835 191 275 401 193 276 124 493 277 390 499
233 290 481 240 555 464 249 180 487 260 700 515 271 080 497 272 031 495 273 836 191 275 410 491 276 127 493 277 392 499
233 300 481 240 560 464 249 190 487 260 705 515 271 081 497 272 035 495 273 840 191 275 411 491 276 128 493 277 400 499
233 310 481 240 565 464 249 200 487 260 710 515 271 085 497 272 036 495 273 841 191 275 450 193 276 135 491 277 405 499
233 320 481 240 570 464 249 210 487 260 715 515 271 086 497 272 040 495 273 880 191 275 460 491 276 136 491 277 410 499
233 330 481 240 575 464 249 220 487 260 716 515 271 090 497 272 041 495 273 881 191 275 461 491 276 138 491 277 412 499
233 340 481 241 060 490 249 230 487 260 718 515 271 096 497 272 045 495 273 900 191 275 465 493 276 141 491 277 415 499
233 350 481 241 070 490 255 060 479 260 730 516 271 100 497 272 046 495 273 901 191 275 466 493 276 142 493 277 417 499
233 360 481 241 080 490 255 070 479 260 740 516 271 101 497 272 050 495 273 940 191 275 500 193 276 156 193 277 420 499
233 370 481 241 090 490 255 080 479 260 750 516 271 110 497 272 051 495 273 941 191 275 510 491 276 158 193 277 425 499
233 380 481 241 100 490 255 090 479 260 760 516 271 111 497 272 055 495 274 000 187 275 511 491 276 161 193 277 430 499
233 390 481 241 110 490 255 100 479 260 770 516 271 120 497 272 056 495 274 001 187 275 512 493 276 170 493 277 440 500
233 400 481 241 120 490 255 110 479 260 790 516 271 121 497 272 060 495 274 010 187 275 513 493 276 171 493 277 442 500
233 410 481 241 130 490 255 120 479 260 800 606 271 130 497 272 061 495 274 011 187 275 530 491 276 173 493 277 450 500
233 420 481 241 140 490 255 130 479 260 810 517 271 131 497 272 065 495 274 040 187 275 531 491 276 175 491 277 455 500
233 430 481 241 150 490 255 140 479 260 820 517 271 470 197 272 066 495 274 041 187 275 535 493 276 176 491 277 460 500
233 440 481 241 160 490 255 150 479 269 000 520 271 471 197 272 070 495 274 050 187 275 536 493 276 178 493 277 462 500
233 450 481 241 170 490 255 160 479 269 010 520 271 472 197 272 071 495 274 051 187 275 550 193 276 179 493 277 465 500
234 010 295 241 180 490 255 170 479 269 020 520 271 473 197 272 075 495 274 060 187 275 600 193 276 180 194 277 467 500
236 060 475 241 190 490 255 180 479 269 030 520 271 474 197 272 076 495 274 061 187 275 610 491 276 185 194 277 470 500
236 070 475 241 200 490 255 190 479 269 040 520 271 475 197 272 080 495 274 070 187 275 611 491 276 200 194 277 475 500
236 080 475 241 210 490 255 200 479 269 130 520 271 476 197 272 081 495 274 071 187 275 615 493 276 205 194 277 480 500
236 090 475 241 220 490 255 210 479 269 140 520 271 477 197 272 085 495 274 080 187 275 616 493 276 210 194 277 510 192
236 100 475 241 230 490 255 220 479 269 150 520 271 478 197 272 086 495 274 081 187 275 645 493 276 215 194 277 515 192
236 110 475 241 240 490 255 230 479 269 160 520 271 480 197 272 090 495 274 090 187 275 649 493 276 218 493 277 520 192
236 120 475 241 250 490 255 240 479 269 400 521 271 481 197 272 091 495 274 091 187 275 650 193 276 219 493 277 525 192
236 130 475 241 260 490 255 250 479 269 403 521 271 482 197 272 100 495 274 100 187 275 660 491 276 220 194 277 530 192
236 140 475 241 270 490 255 260 479 269 406 521 271 483 197 272 101 495 274 101 187 275 661 491 276 222 493 277 535 192
236 150 475 241 280 490 255 270 479 269 409 521 271 484 197 272 110 495 274 110 187 275 685 491 276 223 493 277 540 192
236 160 475 241 290 490 255 280 479 269 412 521 271 485 197 272 111 495 274 111 187 275 686 491 276 225 194 279 110 190
236 170 475 241 300 490 255 290 479 269 420 521 271 486 197 272 120 495 274 120 187 275 691 493 276 230 194 279 120 190
236 180 475 241 310 490 255 300 479 269 423 521 271 487 197 272 121 495 274 121 187 275 693 493 276 235 194 279 130 190
236 190 475 242 060 489 255 310 479 269 430 521 271 490 198 272 130 495 274 130 187 275 694 493 276 245 194 279 140 190
236 200 475 242 070 489 255 320 479 269 435 521 271 491 198 272 131 495 274 131 187 275 695 493 276 247 194 279 150 190
236 210 475 242 080 489 255 330 479 269 438 522 271 492 198 272 132 495 274 220 187 275 700 193 276 249 194 279 160 190
236 220 475 242 090 489 255 340 479 269 440 522 271 493 198 272 133 495 274 221 187 275 750 193 276 255 194 280 000 148
236 230 475 242 100 489 255 350 479 269 460 523 271 494 198 272 134 495 274 230 187 275 760 491 276 307 491 280 010 148
236 240 475 242 110 489 255 360 479 269 462 523 271 500 197 272 135 495 274 231 187 275 761 491 276 308 491 280 015 148
236 250 475 242 120 489 255 370 479 270 400 186 271 501 197 272 136 495 274 240 187 275 765 493 276 309 491 280 018 148
236 270 475 242 130 489 255 380 479 270 401 186 271 502 197 272 137 495 274 241 187 275 767 493 276 310 491 280 020 148
236 290 475 242 140 489 255 390 479 270 500 186 271 506 676 273 310 673 274 250 187 275 800 193 276 311 491 280 030 148
236 300 475 242 150 489 255 400 479 270 501 186 271 508 676 273 315 673 274 251 187 275 810 491 276 312 491 280 040 148
237 060 478 242 160 489 255 410 479 270 502 186 271 510 197 273 322 672 274 260 187 275 811 491 276 314 491 280 045 148
237 070 478 242 170 489 255 420 479 270 505 186 271 511 197 273 325 672 274 261 187 275 850 193 276 317 491 280 050 148
237 080 478 242 180 489 255 430 479 270 509 186 271 512 197 273 330 672 275 030 193 275 855 493 276 402 195 280 055 148
237 090 478 242 190 489 255 440 479 270 540 189 271 513 197 273 340 676 275 031 193 275 856 493 276 410 195 280 060 148
237 100 478 242 200 489 255 450 479 270 541 189 271 514 197 273 350 672 275 040 193 275 860 491 276 411 195 280 082 148
237 110 478 242 210 489 256 060 528 270 542 189 271 517 197 273 450 675 275 041 193 275 861 491 276 412 195 280 084 148
237 120 478 242 220 489 256 062 528 270 543 189 271 520 197 273 451 675 275 060 193 275 900 193 276 413 195 280 086 148
237 130 478 242 230 489 257 060 476 270 550 188 271 521 197 273 452 675 275 061 193 275 910 491 276 414 191 280 088 148
237 140 478 243 600 522 257 070 476 270 551 188 271 522 197 273 453 675 275 110 193 275 911 491 276 415 191 280 090 148
237 150 478 245 060 488 257 080 476 270 552 188 271 523 197 273 455 674 275 111 193 275 915 493 276 420 191 280 092 148
237 160 478 245 070 488 257 090 476 270 555 188 271 524 197 273 456 674 275 120 193 275 916 493 276 421 191 280 096 148
237 170 478 245 080 488 257 100 476 270 564 189 271 525 197 273 457 674 275 121 193 275 940 491 276 426 195 280 098 148
237 180 478 245 090 488 257 110 476 270 565 189 271 530 197 273 458 674 275 130 193 275 941 491 276 427 195 280 102 148
237 190 478 245 100 488 257 120 476 270 566 189 271 531 197 273 470 188 275 131 193 275 944 493 276 543 192 280 103 148
237 200 478 245 110 488 257 130 476 270 567 189 271 532 197 273 480 188 275 150 193 275 945 493 276 545 192 280 104 148
237 210 478 245 120 488 257 140 476 270 568 189 271 533 197 273 490 188 275 151 193 275 950 193 276 548 192 280 137 148
237 220 478 245 130 488 257 150 476 270 569 189 271 534 197 273 492 186 275 165 193 275 975 493 276 550 192 280 139 148
237 230 478 245 140 488 257 160 476 270 570 189 271 540 197 273 494 188 275 166 193 275 976 493 276 552 192 280 146 148
237 240 478 245 150 488 257 170 476 270 571 189 271 541 197 273 495 188 275 170 193 275 980 193 276 553 192 280 147 148
237 250 478 245 160 488 257 180 476 271 025 497 271 542 197 273 570 188 275 171 193 275 990 491 276 554 192 280 148 148
237 270 478 245 170 488 257 190 476 271 026 497 271 543 197 273 580 188 275 180 193 275 991 491 276 555 192 280 149 148
237 290 478 245 180 488 257 200 476 271 027 497 271 544 197 273 582 188 275 181 193 275 994 491 276 556 192 280 150 152
237 300 478 245 190 488 257 210 476 271 028 497 271 550 198 273 589 188 275 190 193 275 995 491 276 650 236 280 152 152
239 800 526 245 200 488 257 220 476 271 030 497 271 551 198 273 590 188 275 191 193 276 040 491 276 655 236 280 154 152
Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page
280 156 152 282 090 669 284 000 629 285 130 116 286 125 116 288 210 155 291 244 680 291 462 683 291 860 685 300 048 150
280 158 152 282 100 669 284 005 661 285 131 116 286 150 131 288 250 155 291 245 680 291 464 683 291 900 683 300 050 150
280 160 152 282 120 669 284 100 120 285 155 116 286 152 131 288 350 155 291 246 680 291 466 683 292 170 528 300 052 150
280 162 152 282 125 669 284 104 120 285 160 116 286 155 131 288 400 155 291 247 680 291 468 683 293 410 505 300 057 84
280 170 152 282 140 669 284 105 120 285 190 116 286 157 131 288 535 155 291 248 680 291 469 683 293 413 507 300 058 150
280 172 152 282 170 669 284 110 120 285 220 116 286 160 131 288 550 155 291 250 680 291 470 683 293 420 507 300 060 150
280 174 152 282 225 669 284 112 120 285 250 116 286 162 131 288 600 155 291 252 680 291 472 683 294 642 466 300 062 150
280 176 152 282 230 669 284 113 120 285 320 116 286 165 131 288 700 155 291 254 680 291 474 683 294 645 472 300 064 150
280 178 152 282 235 669 284 115 120 285 400 116 286 167 131 288 710 155 291 260 680 291 475 683 294 646 472 300 066 150
280 179 152 282 240 669 284 257 669 285 450 116 286 170 131 288 720 155 291 262 680 291 476 683 294 648 470 300 068 150
280 180 152 282 250 669 284 300 668 285 490 116 286 172 131 288 730 155 291 264 680 291 478 683 294 656 469 300 070 150
280 193 152 282 255 669 284 350 668 285 500 116 286 173 131 288 800 155 291 266 680 291 479 683 294 665 467 300 072 150
280 194 152 282 270 669 284 400 668 285 600 116 286 174 131 288 820 155 291 268 680 291 480 683 294 667 467 300 074 150
280 195 152 282 272 669 284 420 668 285 620 116 286 175 131 288 830 155 291 269 680 291 482 683 294 675 469 300 076 150
280 196 152 282 274 669 284 470 668 285 625 116 286 176 131 288 831 155 291 270 680 291 483 683 294 680 472 300 078 150
280 197 152 282 276 669 284 480 668 285 635 116 286 180 131 288 840 155 291 271 680 291 500 683 294 681 472 300 082 150
280 198 152 282 280 669 284 490 668 285 640 116 286 181 131 288 845 154 291 272 680 291 520 683 294 685 467 300 084 150
280 199 152 282 282 669 284 500 668 285 651 116 286 182 131 288 846 154 291 273 680 291 530 683 294 692 474 300 086 150
280 200 152 282 284 669 284 505 668 285 654 116 286 185 131 288 850 155 291 274 680 291 532 683 294 695 474 300 088 150
280 201 152 282 286 669 284 510 668 285 700 116 286 187 131 288 860 155 291 275 680 291 534 683 294 701 470 300 090 150
280 202 152 282 460 670 284 520 668 285 760 116 286 190 131 288 868 154 291 276 680 291 536 683 294 702 470 300 092 150
280 203 152 282 461 670 284 530 668 285 771 116 286 192 131 288 870 154 291 278 680 291 540 683 294 704 469 300 093 150
280 204 152 282 462 670 284 540 668 285 788 116 286 195 131 288 872 154 291 283 680 291 542 683 294 705 469 300 094 150
280 220 174 282 464 670 284 550 668 285 793 116 286 197 131 288 874 154 291 284 680 291 544 683 294 708 469 300 100 150
280 350 174 282 465 670 284 560 668 285 806 116 286 199 131 288 880 154 291 285 680 291 546 683 294 721 468 300 102 150
280 400 218 282 950 670 284 570 668 285 810 116 286 200 131 288 881 154 291 286 680 291 548 683 294 727 468 300 104 150
280 402 218 283 012 179 284 580 668 285 815 116 286 202 131 288 883 154 291 287 680 291 550 683 294 746 471 300 106 150
280 404 218 283 014 179 284 590 668 285 820 116 286 205 131 288 885 154 291 288 680 291 552 683 294 765 466 300 108 150
280 406 218 283 016 179 284 600 668 285 900 149 286 207 131 288 886 154 291 289 680 291 554 683 294 780 471 300 110 150
280 408 218 283 018 179 284 610 668 285 902 149 286 211 131 288 889 154 291 291 680 291 556 683 294 781 471 300 112 150
280 410 218 283 022 179 284 620 668 285 905 149 286 212 131 288 890 154 291 292 680 291 558 683 294 792 473 300 114 150
280 411 181 283 026 179 284 649 670 285 910 149 286 213 131 288 891 154 291 293 680 291 560 683 294 920 468 300 120 114
280 412 181 283 030 179 284 652 670 285 915 149 286 215 131 288 908 73 291 294 680 291 562 683 294 922 468 300 122 114
280 413 181 283 032 179 284 653 670 285 916 149 286 216 131 288 912 73 291 295 680 291 564 683 294 925 468 300 124 114
280 414 181 283 034 179 284 654 670 285 917 149 286 217 131 288 915 73 291 296 680 291 566 683 294 926 467 300 126 114
280 415 181 283 036 179 284 655 670 285 918 149 286 218 131 288 917 73 291 297 680 291 568 683 294 929 462 300 130 114
280 416 181 283 038 179 284 656 670 285 919 149 286 219 131 288 918 73 291 298 680 291 600 684 299 425 408 300 132 114
280 420 219 283 040 179 284 657 670 285 920 149 286 220 131 289 100 106 291 299 680 291 605 684 299 433 408 300 134 114
280 422 219 283 337 178 284 658 670 285 921 149 286 221 131 289 110 106 291 304 680 291 610 684 299 438 408 300 136 114
280 424 219 283 338 178 284 659 670 285 922 149 286 222 131 289 120 106 291 305 680 291 615 684 299 504 408 300 138 114
280 426 219 283 340 178 284 660 680 285 923 149 286 224 131 289 130 106 291 306 680 291 620 684 299 509 408 300 140 114
280 428 219 283 345 178 284 664 680 285 924 149 286 226 131 289 140 106 291 307 680 291 625 684 299 515 408 300 144 114
280 430 219 283 350 178 284 669 680 285 926 149 286 228 131 289 150 106 291 324 680 291 630 684 299 522 408 300 146 114
280 440 219 283 355 178 284 670 680 285 937 149 286 230 131 289 190 106 291 325 680 291 635 684 299 526 408 300 148 114
280 442 219 283 360 178 284 685 680 285 938 149 286 232 131 289 200 106 291 326 680 291 640 685 299 533 408 300 150 114
280 444 219 283 365 178 284 711 680 285 939 149 286 234 131 289 205 106 291 352 680 291 645 684 299 540 408 300 152 114
280 500 174 283 370 178 284 716 680 285 941 149 286 240 131 289 207 106 291 354 680 291 650 685 299 550 408 300 154 79
280 600 174 283 373 178 284 734 680 285 942 149 286 242 131 289 210 106 291 355 680 291 655 685 299 580 408 300 156 114
280 700 174 283 375 178 284 786 680 285 943 149 286 244 131 289 215 106 291 356 680 291 660 685 299 610 408 300 160 114
280 750 173 283 380 178 284 787 680 285 944 149 286 246 131 289 240 106 291 357 680 291 665 685 299 630 408 300 162 114
280 760 173 283 382 178 284 788 680 285 945 149 286 248 131 289 241 106 291 358 680 291 670 685 299 647 408 300 164 114
280 780 173 283 384 178 284 798 670 285 946 149 286 250 131 289 243 106 291 360 680 291 675 685 299 650 408 300 166 114
280 790 173 283 385 178 284 800 670 285 947 149 286 252 131 289 245 106 291 361 680 291 680 685 299 658 408 300 168 114
280 850 174 283 390 178 284 890 116 285 948 149 286 254 131 289 247 106 291 362 680 291 685 685 299 660 408 300 170 114
280 880 174 283 393 178 284 895 671 285 949 149 286 256 131 289 249 106 291 363 680 291 690 685 299 670 408 300 172 114
280 900 174 283 394 178 284 900 116 285 950 153 286 257 131 289 274 106 291 364 680 291 695 685 299 680 408 300 176 114
281 000 174 283 396 178 284 902 116 285 951 153 286 258 131 289 280 106 291 365 680 291 700 685 299 690 408 300 178 114
281 010 174 283 397 178 284 903 116 285 955 153 286 259 131 289 285 106 291 366 680 291 705 685 299 700 408 300 180 114
281 020 174 283 398 178 284 905 116 285 956 153 286 260 131 289 350 172 291 414 680 291 710 685 299 702 408 300 182 114
281 030 174 283 399 178 284 910 116 285 959 149 286 262 131 289 500 172 291 415 680 291 715 685 299 710 408 300 184 114
281 040 174 283 400 178 284 920 116 285 960 153 286 263 131 289 600 172 291 416 680 291 720 685 299 730 408 300 186 114
281 050 174 283 432 180 284 931 116 285 961 153 286 269 131 289 700 172 291 417 680 291 725 685 299 740 408 300 188 114
281 060 174 283 515 177 284 940 116 285 965 153 286 271 131 289 800 172 291 418 680 291 730 685 299 830 408 300 190 114
281 621 176 283 525 177 284 950 116 285 966 153 286 275 131 289 802 172 291 419 680 291 735 685 299 840 408 300 192 114
281 625 176 283 535 177 284 955 116 285 970 153 286 277 131 289 925 106 291 420 680 291 740 685 299 850 408 300 196 114
281 628 176 283 545 177 284 960 116 285 971 153 286 281 131 291 190 680 291 421 680 291 745 685 299 860 408 300 198 114
281 651 131 283 790 240 284 965 116 285 972 153 286 285 131 291 195 680 291 422 680 291 750 685 299 910 408 300 200 114
281 653 131 283 792 240 284 970 116 285 973 153 286 287 131 291 200 680 291 423 680 291 755 685 299 920 408 300 202 114
281 655 131 283 794 240 284 972 116 285 974 153 286 288 131 291 201 680 291 424 680 291 760 685 300 000 150 300 204 114
281 780 176 283 805 241 284 975 116 285 975 153 286 289 131 291 202 680 291 425 680 291 765 685 300 002 150 300 206 114
281 785 176 283 810 241 284 977 116 285 976 153 286 290 131 291 204 680 291 426 680 291 770 685 300 004 150 300 208 114
281 790 176 283 815 241 284 980 116 285 977 153 286 291 131 291 205 680 291 427 680 291 775 685 300 006 150 300 212 114
281 838 669 283 820 241 284 982 116 285 978 153 286 292 131 291 210 680 291 428 680 291 780 685 300 010 150 300 214 114
281 840 669 283 825 241 284 985 116 285 979 153 286 293 131 291 218 680 291 429 680 291 785 685 300 012 150 300 216 114
281 860 669 283 835 241 284 987 116 285 980 158 286 294 131 291 220 680 291 440 683 291 790 685 300 014 150 300 218 114
281 870 669 283 840 241 285 000 116 285 981 153 286 402 131 291 222 680 291 442 683 291 795 685 300 016 150 300 220 114
281 988 669 283 845 241 285 050 116 285 983 153 286 403 131 291 224 680 291 444 683 291 800 685 300 018 150 300 222 114
281 990 669 283 850 241 285 051 116 285 984 158 286 404 131 291 225 680 291 446 683 291 805 685 300 022 150 300 224 114
281 991 669 283 855 241 285 065 116 285 988 158 286 405 131 291 226 680 291 448 683 291 810 685 300 024 150 300 228 121
281 993 669 283 865 241 285 070 116 286 000 131 286 410 131 291 227 680 291 449 683 291 815 685 300 026 150 300 230 121
282 010 669 283 870 241 285 073 116 286 010 131 286 411 131 291 228 680 291 450 683 291 820 685 300 028 150 300 232 121
282 013 669 283 875 241 285 075 116 286 020 131 286 412 131 291 229 680 291 451 683 291 825 685 300 030 150 300 234 121
282 020 669 283 880 241 285 080 116 286 102 116 286 413 131 291 230 680 291 452 683 291 830 685 300 032 150 300 236 121
282 030 669 283 920 116 285 100 116 286 103 116 287 370 686 291 232 680 291 454 683 291 835 685 300 034 150 300 238 121
282 040 669 283 923 120 285 120 116 286 104 116 287 376 687 291 234 680 291 456 683 291 840 685 300 040 150 300 242 121
282 050 669 283 926 120 285 125 116 286 110 116 287 636 683 291 240 680 291 458 683 291 845 685 300 042 150 300 244 121
282 060 669 283 930 116 285 128 116 286 112 116 288 200 155 291 242 680 291 459 683 291 850 685 300 044 150 300 246 121
282 070 669 283 934 120 285 129 116 286 120 116 288 205 155 291 243 680 291 460 683 291 855 685 300 046 150 300 248 121
Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page
300 250 121 300 920 113 305 729 128 309 961 144 322 646 695 325 120 663 332 610 106 333 628 97 334 516 169 335 745 91
300 255 81 300 922 113 305 733 128 318 523 691 322 650 696 325 121 664 332 700 116 333 629 97 334 517 169 335 749 91
300 256 121 300 924 113 305 735 128 318 525 691 322 651 696 325 130 663 332 710 106 333 630 97 334 522 169 335 750 91
300 258 121 300 934 113 305 737 128 318 526 692 322 653 697 325 131 663 332 800 116 333 631 97 334 524 169 335 753 91
300 260 121 300 936 113 306 076 157 318 528 692 322 655 697 325 132 663 332 810 106 333 632 97 334 526 169 335 754 91
300 262 121 300 938 113 306 078 157 318 532 691 322 663 699 325 811 665 332 900 116 333 633 97 334 579 169 335 759 91
300 264 121 300 940 78 306 080 157 318 535 692 322 680 697 325 812 665 332 910 106 333 650 91 334 581 169 335 760 91
300 265 81 300 942 78 306 083 157 318 570 691 322 682 697 329 340 694 332 931 116 333 651 91 334 582 169 335 776 91
300 266 121 300 950 113 306 085 157 318 571 691 322 735 700 329 341 694 332 940 99 333 653 91 334 589 169 335 777 91
300 268 121 300 952 113 306 087 157 318 572 691 322 747 662 329 342 694 332 945 99 333 655 91 334 810 169 335 778 91
300 272 121 300 954 113 306 089 157 318 574 691 322 751 662 330 440 109 332 950 99 333 675 91 334 811 169 335 780 166
300 274 121 300 958 113 306 091 157 318 800 692 322 752 662 330 450 109 332 955 99 333 700 91 334 815 169 335 782 91
300 276 121 300 970 113 306 093 157 318 805 692 322 753 662 330 460 109 333 030 91 333 702 91 334 816 169 335 786 91
300 278 121 300 972 113 306 095 157 318 810 692 322 754 662 330 490 109 333 035 91 333 705 91 334 820 169 335 787 91
300 280 121 300 990 78 306 097 157 318 815 692 322 755 662 330 682 91 333 090 91 333 707 91 334 821 169 335 800 166
300 282 121 300 995 78 306 098 157 318 820 692 322 756 662 330 683 91 333 095 91 333 710 91 334 825 169 335 820 166
300 284 121 301 066 91 306 099 157 318 825 692 322 757 662 330 820 91 333 100 91 333 713 91 334 830 169 335 830 166
300 286 121 301 070 91 306 104 157 318 832 691 322 758 662 330 821 91 333 105 91 333 719 91 334 831 169 335 850 166
300 288 121 304 203 67 306 106 157 318 840 693 322 771 662 330 910 171 333 200 91 333 720 91 334 835 169 335 860 166
300 292 121 304 205 67 306 108 157 318 845 693 322 773 662 330 921 171 333 203 91 333 722 91 334 836 169 335 880 166
300 294 121 304 207 67 306 110 157 318 851 693 322 774 662 330 929 171 333 205 91 333 723 91 334 840 169 335 890 166
300 296 121 304 208 67 306 112 157 318 852 693 322 775 662 330 930 171 333 206 91 333 745 91 334 841 169 335 900 166
300 298 121 304 209 67 306 116 157 318 853 693 322 908 657 330 935 171 333 215 91 333 750 91 334 904 97 335 910 166
300 300 121 304 210 67 306 119 157 318 854 693 322 910 700 330 946 171 333 220 91 333 752 91 334 906 97 335 917 166
300 304 121 304 303 74 308 881 147 318 855 693 322 930 689 330 960 171 333 226 91 333 755 91 334 907 97 335 920 166
300 305 81 304 304 74 308 884 147 318 856 693 322 950 700 330 963 171 333 229 91 333 760 91 334 908 97 335 940 166
300 306 121 304 305 74 308 891 147 320 053 659 322 986 700 331 100 124 333 300 91 333 761 91 334 910 97 335 950 166
300 308 121 304 306 74 308 893 147 320 058 658 323 100 662 331 105 124 333 303 91 333 798 91 334 911 97 335 960 166
300 310 121 304 307 74 308 895 147 320 061 658 323 105 663 331 107 124 333 304 91 333 800 91 334 920 97 335 980 164
300 312 121 304 308 74 308 901 147 320 084 659 323 110 663 331 110 546 333 305 91 333 803 91 334 921 97 335 988 164
300 342 81 304 317 74 308 905 147 320 085 659 323 400 660 331 130 125 333 315 91 333 805 91 334 926 97 336 000 164
300 343 81 304 319 74 308 910 147 320 090 659 323 420 660 331 132 125 333 316 91 333 819 97 334 929 97 336 010 164
300 344 81 304 430 156 308 912 147 320 095 659 323 425 660 331 133 125 333 362 97 333 845 91 334 930 97 336 020 164
300 345 81 304 432 156 308 914 147 320 112 659 323 500 660 331 180 124 333 367 97 333 850 91 334 937 97 336 030 164
300 346 81 304 434 156 308 916 147 320 150 658 323 503 660 331 181 124 333 380 97 333 852 91 334 963 97 336 040 164
300 347 81 304 435 156 308 966 147 320 810 665 323 506 658 331 182 124 333 381 97 333 855 91 334 964 97 336 060 164
300 348 81 304 436 156 308 967 147 320 815 665 323 507 665 331 200 124 333 382 97 333 860 91 334 967 97 336 070 164
300 353 81 304 437 156 308 968 147 321 460 704 323 509 679 331 203 124 333 383 97 333 865 91 334 968 97 336 080 164
300 354 81 304 438 156 308 969 147 321 640 655 323 510 660 331 204 124 333 385 97 333 870 91 334 971 97 336 090 164
300 355 81 304 439 156 309 690 146 321 641 656 323 511 660 331 205 546 333 386 97 333 872 91 334 972 97 336 100 164
300 357 81 304 440 156 309 692 146 321 642 655 323 513 679 331 210 124 333 387 97 333 875 91 334 973 97 336 120 164
300 358 81 304 442 156 309 700 146 321 643 656 323 514 679 331 213 124 333 388 97 333 877 91 334 974 97 336 160 168
300 362 81 304 444 156 309 702 146 321 645 656 323 516 679 331 215 124 333 389 97 333 880 91 334 975 97 336 162 168
300 363 81 304 446 156 309 703 146 321 670 651 323 517 679 331 217 124 333 390 97 333 882 91 334 976 97 336 165 168
300 366 81 304 448 156 309 705 146 321 675 654 323 518 679 331 218 124 333 391 97 333 885 91 334 977 97 336 170 168
300 369 81 304 450 156 309 710 146 321 680 654 323 519 679 331 222 127 333 392 97 333 888 91 334 978 97 336 171 168
300 370 81 304 451 156 309 712 146 321 747 665 323 520 660 331 224 127 333 394 97 333 890 91 334 979 97 336 172 168
300 371 81 304 454 156 309 717 146 321 837 580 323 525 660 331 227 124 333 395 97 333 893 91 334 980 97 336 175 168
300 372 81 304 456 156 309 718 146 321 838 580 323 540 663 331 240 116 333 396 97 333 897 91 334 981 97 336 190 166
300 376 81 304 460 156 309 720 146 321 839 580 323 880 660 331 250 116 333 397 97 333 899 91 334 982 97 336 195 166
300 400 79 304 464 156 309 722 146 322 100 679 323 941 662 331 260 116 333 398 97 333 900 124 334 983 97 336 205 166
300 402 79 304 468 156 309 726 146 322 101 679 323 950 662 331 261 116 333 399 97 333 904 124 334 984 97 336 206 166
300 404 79 304 470 156 309 727 146 322 102 678 324 000 662 331 436 126 333 400 91 333 905 124 334 985 97 336 350 166
300 410 79 304 472 156 309 729 146 322 104 678 324 020 662 331 438 126 333 405 91 333 908 91 334 986 97 336 355 166
300 412 79 304 500 158 309 730 146 322 110 686 324 050 659 331 451 126 333 500 97 333 910 91 334 987 97 336 360 166
300 414 79 304 510 158 309 731 146 322 111 686 324 070 662 331 452 126 333 501 97 333 911 91 334 988 97 336 370 166
300 420 79 304 520 158 309 732 146 322 112 686 324 976 664 331 471 126 333 502 97 333 916 91 334 989 97 336 380 166
300 422 79 304 530 158 309 736 146 322 113 686 324 977 501 331 600 116 333 503 97 333 917 91 334 990 97 336 382 166
300 424 79 304 710 159 309 737 146 322 114 687 324 980 664 331 610 116 333 504 97 333 920 91 334 991 97 336 395 166
300 426 79 304 720 159 309 738 146 322 115 687 324 990 664 331 615 131 333 505 97 333 921 91 334 992 97 336 425 166
300 434 79 304 730 159 309 740 146 322 122 686 324 991 664 331 616 131 333 506 97 333 925 91 334 993 97 336 430 166
300 436 79 304 740 159 309 743 146 322 124 686 324 992 664 331 617 131 333 507 97 333 930 91 335 101 113 336 440 166
300 438 79 304 800 504 309 744 146 322 190 679 324 993 664 331 618 131 333 508 97 333 935 91 335 111 113 336 449 166
300 440 79 304 850 504 309 774 146 322 191 679 324 994 664 331 620 116 333 509 97 333 946 91 335 121 113 336 450 166
300 442 79 305 605 128 309 776 146 322 192 679 324 996 664 331 640 116 333 510 97 333 947 91 335 131 113 336 470 166
300 444 79 305 615 128 309 790 146 322 201 667 324 997 664 331 651 116 333 511 97 333 950 91 335 201 113 336 480 166
300 446 79 305 625 128 309 791 146 322 206 667 324 998 664 331 659 116 333 536 97 333 951 91 335 211 113 336 489 166
300 448 79 305 635 128 309 792 146 322 210 657 325 000 663 331 677 106 333 537 97 333 953 91 335 221 113 336 490 164
300 452 84 305 645 128 309 793 146 322 246 657 325 009 663 331 725 116 333 538 97 333 954 91 335 231 113 336 491 164
300 456 84 305 655 128 309 794 146 322 300 689 325 010 663 331 730 116 333 539 97 333 969 91 335 241 113 336 495 164
300 458 84 305 665 128 309 796 146 322 302 689 325 015 663 331 750 116 333 580 97 333 971 91 335 311 113 336 496 164
300 460 84 305 670 130 309 798 143 322 306 690 325 020 663 331 850 85 333 581 97 333 974 91 335 321 113 336 500 164
300 462 84 305 672 130 309 799 143 322 307 690 325 021 664 331 851 85 333 586 97 333 979 91 335 322 112 336 505 164
300 464 84 305 674 130 309 802 142 322 308 690 325 023 664 331 855 85 333 587 97 334 000 116 335 323 112 336 510 164
300 466 80 305 676 130 309 806 142 322 310 690 325 024 664 331 900 85 333 589 97 334 002 116 335 331 113 336 515 164
300 468 80 305 678 130 309 808 142 322 400 694 325 025 664 331 901 85 333 590 97 334 020 116 335 341 113 336 550 164
300 469 80 305 680 130 309 810 142 322 401 694 325 030 663 331 905 85 333 600 91 334 300 106 335 351 113 336 560 164
300 472 81 305 682 130 309 812 142 322 402 694 325 033 664 331 969 131 333 605 91 334 305 106 335 695 116 336 570 164
300 481 78 305 684 130 309 860 144 322 403 694 325 034 664 331 977 131 333 610 91 334 499 169 335 720 91 336 575 164
300 484 81 305 686 130 309 863 144 322 499 703 325 040 664 331 984 133 333 615 91 334 500 170 335 721 91 336 580 164
300 485 78 305 688 130 309 865 144 322 600 696 325 050 663 331 985 133 333 620 97 334 501 169 335 727 91 336 585 164
300 487 78 305 701 128 309 880 145 322 602 695 325 051 663 331 994 133 333 621 97 334 505 170 335 730 91 336 630 164
300 488 78 305 705 128 309 929 142 322 612 699 325 085 663 331 995 133 333 622 97 334 506 169 335 732 91 336 640 164
300 490 80 305 709 128 309 930 142 322 622 697 325 086 663 332 400 116 333 623 97 334 507 169 335 735 91 336 652 164
300 492 80 305 713 128 309 931 142 322 624 697 325 090 663 332 410 106 333 624 97 334 508 170 335 736 91 336 670 164
300 508 81 305 717 128 309 932 142 322 626 698 325 095 664 332 500 116 333 625 97 334 510 170 335 738 91 336 680 164
300 588 80 305 721 128 309 933 142 322 628 698 325 100 663 332 510 106 333 626 97 334 513 169 335 740 91 336 690 164
300 598 80 305 725 128 309 960 145 322 630 696 325 115 663 332 600 116 333 627 97 334 514 169 335 744 91 337 190 166
Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page
337 191 166 339 640 82 342 134 270 344 128 256 344 432 257 344 844 265 346 028 553 358 430 518 358 885 230 359 465 253
337 195 166 339 641 82 342 136 270 344 130 256 344 433 257 344 854 702 346 030 553 358 440 518 358 886 230 359 470 253
337 196 166 339 652 140 342 138 270 344 140 254 344 434 257 344 856 702 346 050 552 358 441 518 358 887 230 359 500 302
337 200 166 339 654 140 342 140 270 344 143 254 344 435 257 344 858 268 346 052 552 358 442 518 358 890 231 359 501 302
337 201 166 339 680 72 342 142 270 344 148 254 344 436 257 344 960 266 346 054 552 358 443 448 358 891 231 359 502 245
337 205 166 339 681 72 342 144 270 344 149 254 344 438 257 344 966 266 346 056 552 358 444 448 358 892 231 359 504 245
337 206 166 339 685 73 342 146 270 344 151 254 344 439 257 345 200 641 346 058 552 358 445 448 358 895 231 359 506 245
337 215 166 339 690 72 342 148 270 344 156 254 344 440 258 345 201 641 346 060 552 358 446 518 358 896 231 359 508 245
337 220 166 339 691 72 342 790 236 344 157 254 344 441 258 345 202 641 346 070 553 358 447 518 358 897 231 359 512 246
337 230 166 339 695 73 342 795 236 344 158 254 344 442 258 345 203 641 346 072 553 358 448 518 358 935 251 359 514 246
337 240 166 339 716 409 342 800 236 344 159 254 344 443 258 345 204 641 346 074 553 358 450 519 358 980 235 359 515 246
337 245 166 339 900 104 342 810 236 344 161 254 344 444 258 345 205 641 346 076 553 358 455 518 358 982 235 359 516 246
337 250 166 339 902 104 343 023 238 344 167 254 344 445 258 345 206 641 346 078 553 358 500 277 358 983 301 359 518 246
337 253 166 339 905 104 343 026 238 344 171 254 344 446 258 345 207 641 346 080 553 358 502 277 358 984 301 359 522 248
337 255 166 339 907 104 343 027 238 344 181 254 344 448 258 345 208 641 346 090 555 358 504 277 359 026 221 359 524 248
337 270 166 339 909 104 343 028 238 344 182 254 344 449 258 345 209 641 346 092 555 358 506 277 359 028 221 359 526 248
337 280 166 339 915 102 343 090 238 344 183 254 344 450 258 345 220 642 346 094 555 358 508 277 359 030 221 359 528 248
337 290 166 339 916 102 343 095 238 344 192 254 344 451 258 345 221 642 346 096 555 358 510 277 359 032 221 359 533 249
337 295 166 339 925 102 343 230 238 344 194 254 344 452 258 345 222 642 346 098 555 358 512 277 359 034 221 359 535 249
337 300 164 339 926 102 343 240 238 344 195 254 344 454 258 345 223 642 346 100 555 358 514 277 359 036 221 359 537 249
337 301 164 339 950 102 343 250 238 344 196 254 344 456 258 345 224 642 346 110 554 358 516 277 359 061 220 359 539 249
337 305 164 339 951 102 343 275 238 344 197 254 344 458 258 345 225 642 346 112 554 358 518 277 359 063 220 359 543 250
337 306 164 339 955 102 343 290 238 344 198 256 344 460 258 345 226 642 346 114 554 358 520 277 359 065 220 359 545 250
337 310 164 339 956 102 343 295 238 344 199 254 344 462 258 345 227 642 346 116 554 358 550 277 359 066 220 359 547 250
337 311 164 339 970 102 343 500 278 344 203 254 344 463 258 345 228 642 346 118 554 358 560 276 359 068 220 359 549 250
337 315 164 339 971 102 343 502 278 344 204 254 344 465 260 345 229 642 346 120 554 358 562 276 359 080 220 359 572 245
337 316 164 340 020 262 343 504 278 344 208 254 344 470 260 345 240 643 346 140 556 358 564 276 359 085 221 359 574 245
337 320 164 340 022 262 343 506 278 344 209 254 344 475 260 345 241 643 346 142 556 358 566 276 359 091 224 359 576 245
337 321 164 340 024 262 343 507 278 344 213 254 344 480 260 345 242 643 346 144 556 358 568 276 359 093 224 359 578 245
337 330 164 340 026 262 343 508 278 344 220 254 344 490 261 345 243 643 346 146 556 358 570 276 359 095 224 359 582 246
337 340 164 340 028 262 343 509 278 344 221 254 344 492 261 345 244 643 358 010 301 358 572 276 359 105 224 359 584 246
337 350 164 340 030 262 343 510 278 344 236 254 344 494 261 345 245 643 358 011 301 358 574 276 359 107 224 359 586 246
337 352 164 340 032 262 343 515 278 344 237 254 344 496 261 345 246 643 358 012 301 358 576 276 359 110 224 359 588 246
337 360 164 340 040 263 343 517 278 344 238 254 344 533 266 345 247 643 358 014 301 358 578 276 359 130 224 359 589 252
337 370 164 340 042 263 343 518 278 344 241 254 344 534 266 345 248 643 358 015 301 358 580 276 359 135 224 359 591 252
337 380 164 340 044 263 343 519 278 344 243 254 344 536 266 345 249 643 358 016 301 358 581 276 359 140 224 359 593 247
337 390 164 340 046 263 343 520 278 344 245 254 344 537 266 345 250 641 358 017 301 358 640 275 359 160 224 359 594 247
337 400 164 340 048 263 343 521 278 344 247 254 344 539 259 345 251 641 358 050 301 358 642 275 359 170 224 359 595 247
337 430 164 340 050 263 343 522 278 344 252 254 344 540 259 345 252 641 358 052 301 358 644 275 359 180 224 359 596 247
339 001 137 340 052 263 343 523 278 344 253 254 344 542 259 345 253 641 358 055 301 358 646 275 359 182 224 359 600 237
339 006 137 340 060 263 343 524 278 344 254 254 344 544 259 345 254 641 358 083 242 358 648 275 359 184 224 359 602 237
339 031 137 340 062 263 343 525 278 344 255 254 344 546 259 345 255 641 358 085 242 358 650 275 359 200 280 359 604 237
339 036 137 340 064 263 343 526 278 344 256 254 344 547 259 345 256 641 358 088 242 358 680 229 359 205 280 359 606 237
339 045 137 340 066 263 343 528 278 344 257 254 344 548 259 345 257 641 358 101 273 358 684 229 359 207 280 359 608 237
339 063 137 340 068 263 343 529 278 344 265 254 344 560 701 345 258 641 358 102 273 358 686 229 359 209 280 359 610 237
339 073 83 340 070 263 343 535 278 344 266 254 344 562 272 345 259 641 358 104 273 358 688 229 359 211 280 359 612 237
339 075 141 340 072 263 343 540 680 344 267 254 344 564 271 345 270 643 358 105 273 358 690 229 359 212 280 359 614 237
339 085 409 340 075 263 343 565 279 344 268 254 344 581 701 345 271 643 358 129 279 358 692 229 359 213 280 359 616 237
339 086 139 342 002 270 343 567 279 344 271 254 344 586 701 345 272 643 358 147 279 358 700 228 359 215 281 359 618 237
339 087 139 342 004 270 344 001 254 344 273 254 344 589 701 345 273 643 358 170 273 358 704 228 359 217 281 359 620 237
339 090 542 342 006 270 344 008 254 344 275 254 344 596 701 345 274 643 358 172 273 358 706 228 359 220 280 359 622 237
339 105 135 342 008 270 344 009 254 344 277 254 344 597 429 345 275 643 358 174 273 358 708 228 359 226 280 359 624 237
339 106 135 342 010 270 344 011 254 344 279 254 344 598 430 345 276 643 358 176 273 358 710 228 359 234 524 359 626 237
339 115 135 342 012 270 344 025 254 344 281 254 344 600 641 345 277 643 358 200 273 358 712 228 359 250 225 359 628 237
339 116 135 342 014 270 344 031 254 344 282 256 344 631 642 345 278 643 358 205 273 358 719 229 359 280 280 359 630 237
339 125 135 342 016 270 344 033 254 344 284 256 344 632 642 345 279 643 358 210 273 358 720 227 359 281 280 359 632 237
339 126 135 342 018 270 344 034 254 344 286 256 344 633 642 345 290 642 358 220 273 358 722 227 359 282 280 359 634 237
339 175 135 342 020 270 344 036 254 344 288 256 344 650 641 345 291 642 358 232 273 358 724 227 359 330 243 359 636 237
339 176 135 342 022 270 344 041 254 344 290 256 344 681 642 345 292 642 358 246 501 358 727 227 359 331 243 359 638 237
339 250 138 342 024 270 344 046 254 344 292 256 344 682 642 345 293 642 358 250 501 358 742 227 359 335 243 359 665 200
339 255 136 342 026 270 344 057 254 344 294 256 344 683 642 345 294 642 358 252 501 358 816 230 359 336 243 359 670 200
339 256 136 342 028 270 344 058 254 344 296 256 344 690 645 345 295 642 358 254 501 358 817 230 359 340 243 359 675 200
339 260 138 342 030 270 344 059 254 344 298 256 344 691 645 345 296 642 358 255 501 358 818 230 359 341 243 359 700 200
339 265 136 342 032 270 344 060 254 344 302 256 344 790 268 345 297 642 358 256 501 358 819 230 359 342 244 359 702 200
339 266 136 342 034 270 344 061 254 344 306 256 344 791 268 345 298 642 358 257 501 358 820 230 359 343 244 359 704 200
339 270 105 342 036 270 344 062 254 344 308 256 344 792 264 345 299 642 358 258 501 358 821 230 359 345 244 359 740 200
339 276 103 342 038 270 344 064 254 344 310 256 344 793 264 345 510 661 358 259 501 358 823 231 359 346 244 359 742 200
339 277 103 342 040 270 344 068 254 344 312 256 344 797 264 345 520 555 358 260 502 358 824 231 359 347 244 359 744 200
339 280 105 342 042 270 344 088 256 344 314 256 344 798 264 345 525 555 358 262 502 358 825 231 359 350 244 359 750 200
339 286 103 342 044 270 344 090 256 344 316 256 344 803 272 345 530 555 358 264 502 358 826 231 359 351 244 359 752 200
339 287 103 342 046 270 344 092 256 344 318 256 344 804 272 345 535 555 358 266 502 358 827 231 359 352 244 359 754 200
339 310 135 342 048 270 344 094 256 344 320 256 344 805 264 345 540 555 358 268 502 358 828 231 359 356 244 359 760 200
339 311 135 342 102 270 344 096 256 344 322 256 344 808 264 345 545 555 358 294 518 358 849 230 359 357 244 359 762 200
339 320 135 342 104 270 344 100 256 344 324 256 344 811 264 345 550 555 358 295 518 358 850 230 359 358 244 359 764 200
339 321 135 342 106 270 344 102 256 344 326 256 344 812 265 345 555 555 358 296 518 358 851 230 359 399 242 359 790 677
339 330 135 342 108 270 344 103 254 344 351 254 344 814 264 345 560 555 358 298 518 358 852 230 359 400 242 359 791 677
339 331 135 342 110 270 344 104 256 344 373 254 344 816 272 345 565 555 358 300 518 358 853 230 359 402 242 359 792 677
339 350 135 342 112 270 344 106 256 344 418 257 344 820 266 345 570 555 358 310 518 358 854 230 359 406 242 359 890 225
339 351 135 342 114 270 344 108 256 344 419 257 344 822 266 346 000 552 358 360 518 358 855 231 359 408 242 359 892 222
339 390 135 342 116 270 344 110 256 344 420 257 344 824 266 346 002 552 358 400 274 358 859 231 359 410 242 359 897 222
339 393 135 342 118 270 344 112 256 344 422 257 344 826 266 346 004 552 358 402 274 358 860 231 359 415 253 359 899 222
339 396 137 342 120 270 344 114 256 344 423 257 344 827 266 346 006 552 358 404 274 358 861 231 359 420 253 359 900 222
339 400 135 342 122 270 344 116 256 344 424 257 344 829 266 346 008 552 358 406 274 358 862 231 359 440 253 359 902 222
339 401 135 342 124 270 344 118 256 344 425 257 344 830 266 346 010 552 358 408 274 358 863 231 359 442 253 359 908 225
339 630 140 342 126 270 344 121 254 344 426 257 344 832 266 346 020 553 358 410 274 358 864 231 359 450 253 359 910 222
339 631 140 342 128 270 344 122 256 344 428 257 344 835 265 346 022 553 358 412 274 358 880 230 359 452 253 359 911 222
339 634 140 342 130 270 344 124 256 344 430 257 344 839 265 346 024 553 358 414 274 358 881 230 359 454 253 359 912 222
339 637 140 342 132 270 344 126 256 344 431 257 344 841 265 346 026 553 358 416 274 358 882 230 359 460 253 359 915 222
Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page
359 916 222 360 991 598 362 503 631 367 010 635 372 157 116 372 524 58 374 561 70 375 344 87 417 390 409 428 400 350
359 918 225 360 993 598 362 505 631 369 010 542 372 158 116 372 525 58 374 562 70 375 345 87 417 400 409 428 402 419
359 920 222 360 995 598 362 507 631 369 018 542 372 159 116 372 527 58 374 579 70 375 350 86 417 410 409 428 403 419
359 922 222 360 997 598 362 509 631 369 020 542 372 160 116 372 528 58 374 580 70 375 351 86 417 469 409 428 406 419
359 924 222 361 000 598 362 821 636 369 030 646 372 161 116 372 529 58 374 581 70 375 354 87 417 477 409 428 407 419
359 926 222 361 005 598 363 000 599 369 032 646 372 170 116 372 530 58 374 582 70 375 355 87 417 520 409 428 408 419
359 927 222 361 010 598 363 003 599 369 034 646 372 180 116 372 531 58 374 583 70 375 380 86 422 000 356 428 409 419
359 935 222 361 015 598 363 006 599 369 036 646 372 190 116 372 534 58 374 585 68 375 381 86 422 009 422 428 410 350
359 936 222 361 020 598 363 009 599 369 038 646 372 196 116 372 535 58 374 587 68 375 384 87 422 020 320 428 411 419
359 937 222 361 026 598 363 012 599 369 040 646 372 200 116 372 537 58 374 590 68 375 385 87 422 023 414 428 412 419
359 942 223 361 030 598 363 015 600 369 042 646 372 210 116 372 538 58 374 595 68 375 389 87 422 030 360 428 413 422
359 944 223 361 035 598 363 016 599 369 044 646 372 227 116 372 539 58 374 660 68 375 390 87 422 036 322 428 440 350
359 946 223 361 040 598 363 019 599 369 046 646 372 230 116 372 542 58 374 661 68 375 396 87 422 045 332 428 450 350
359 948 223 361 046 598 363 022 599 369 048 646 372 240 116 372 543 58 374 662 68 375 398 87 422 052 422 428 452 419
359 950 223 361 048 598 366 238 644 369 060 540 372 260 116 372 544 58 374 665 68 375 400 86 422 053 422 428 453 419
359 951 223 361 049 598 366 243 644 369 070 544 372 265 116 372 546 58 374 666 68 375 401 86 422 095 340 428 454 419
359 952 223 361 050 598 366 248 644 369 080 541 372 267 116 372 547 58 374 667 68 375 404 87 422 100 324 428 455 419
359 960 223 361 051 598 366 253 644 369 220 543 372 270 116 372 548 58 374 670 68 375 405 87 422 105 422 428 458 324
359 962 223 361 052 598 366 255 644 369 230 543 372 285 116 372 555 59 374 671 68 375 500 89 422 110 320 428 459 324
359 964 223 361 053 598 366 256 644 369 240 547 372 296 116 372 556 59 374 672 68 375 501 89 422 115 324 428 464 419
359 966 223 361 054 598 366 257 644 369 242 547 372 339 61 372 557 59 374 675 68 375 504 89 422 122 419 428 465 419
359 968 223 361 055 598 366 275 645 369 244 547 372 340 61 372 558 59 374 676 68 375 505 89 422 142 334 428 467 419
359 970 223 361 056 598 366 500 606 369 245 549 372 341 61 372 561 58 374 677 68 375 509 89 422 143 334 428 471 419
359 972 223 361 057 598 366 501 606 369 250 547 372 344 61 372 562 58 374 680 68 375 510 89 422 160 318 428 483 419
359 974 223 361 058 598 366 503 606 369 252 605 372 347 61 372 563 58 374 681 68 375 512 89 422 170 419 428 484 419
359 976 223 361 060 598 366 505 606 369 291 545 372 348 61 372 564 58 374 682 68 375 515 89 422 220 334 428 489 352
359 986 222 361 070 598 366 510 606 369 300 545 372 349 61 372 565 58 374 685 68 375 516 87 422 230 322 428 497 419
359 990 223 361 100 603 366 512 606 369 310 545 372 351 61 372 566 58 374 686 68 375 518 87 422 240 322 428 570 419
359 991 223 361 110 603 366 514 606 369 315 545 372 352 61 372 567 58 374 687 68 375 526 87 422 270 342 428 571 419
359 995 223 361 120 601 366 516 606 369 320 545 372 353 61 372 568 58 374 723 70 375 528 87 422 286 352 428 572 419
359 996 223 361 122 601 366 520 606 369 330 398 372 355 61 372 603 61 374 726 70 375 910 90 422 290 354 428 574 419
360 500 232 361 124 604 366 523 606 369 332 398 372 356 61 372 650 61 374 727 70 375 915 90 422 295 322 428 600 320
360 502 232 361 126 550 366 524 606 369 334 398 372 359 61 372 651 61 374 729 70 375 920 90 422 302 354 428 712 342
360 504 232 361 128 604 366 527 606 369 336 398 372 360 61 372 652 61 374 730 68 375 925 90 422 305 354 428 730 320
360 505 232 361 129 604 366 531 606 369 340 398 372 361 61 372 653 61 374 731 68 376 060 80 422 310 354 428 740 320
360 506 232 361 130 604 366 564 615 369 342 398 372 362 61 372 657 61 374 732 68 376 062 80 422 390 324 428 749 324
360 507 232 361 140 602 366 565 615 369 344 398 372 364 61 373 450 61 374 735 68 376 421 567 422 395 342 428 750 318
360 508 232 361 150 602 366 584 615 369 346 398 372 367 61 373 454 61 374 736 68 376 422 567 422 585 356 428 758 324
360 510 232 361 153 603 366 585 615 369 606 537 372 368 61 373 484 61 374 737 68 376 469 65 422 591 322 428 760 318
360 512 232 361 155 603 366 604 615 369 607 536 372 369 61 373 995 173 374 740 68 376 470 65 422 592 322 428 770 322
360 514 232 361 300 599 366 605 615 369 608 536 372 371 61 374 004 173 374 741 68 376 472 65 422 602 422 428 780 322
360 516 232 361 304 599 366 624 615 370 100 174 372 377 61 374 030 173 374 742 68 376 481 567 422 604 422 428 800 419
360 518 232 361 308 599 366 625 615 370 110 174 372 380 61 374 035 173 374 745 68 376 482 567 422 605 422 428 802 419
360 550 232 361 311 599 366 670 608 370 120 174 372 382 61 374 300 66 374 746 68 376 620 63 422 612 422 428 804 419
360 551 232 361 315 599 366 671 608 370 130 174 372 387 61 374 420 66 374 747 68 376 621 63 422 615 422 428 807 422
360 552 232 361 316 599 366 700 608 370 140 174 372 389 61 374 450 66 374 750 68 376 622 63 422 620 422 428 808 419
360 553 232 361 318 599 366 702 608 370 150 174 372 390 61 374 470 68 374 751 68 376 623 63 422 626 422 428 809 419
360 554 232 361 320 599 366 704 608 370 160 174 372 391 61 374 492 68 374 752 68 376 625 63 422 627 422 428 810 422
360 556 232 361 321 599 366 706 608 370 170 174 372 392 61 374 494 68 374 755 68 376 710 75 422 629 422 428 814 422
360 558 232 361 322 599 366 710 608 370 175 174 372 399 61 374 496 68 374 756 68 376 712 75 422 631 422 428 819 419
360 560 232 361 323 599 366 712 608 370 180 174 372 400 61 374 498 68 374 757 68 376 713 75 422 632 422 428 820 419
360 562 232 361 324 599 366 714 608 370 190 174 372 402 61 374 500 68 374 780 70 376 715 75 422 861 422 428 830 419
360 564 232 361 326 599 366 716 608 370 210 174 372 405 61 374 506 68 374 781 70 376 717 75 422 873 419 428 847 422
360 566 232 361 361 599 366 752 608 370 220 174 372 406 61 374 507 68 374 782 70 376 718 75 422 874 419 428 871 350
360 568 232 361 500 644 366 754 608 370 230 174 372 419 65 374 508 68 374 785 70 376 720 75 422 877 330 428 872 350
360 600 233 361 792 639 366 756 608 370 240 174 372 420 65 374 509 68 374 786 70 376 722 75 423 100 324 428 882 419
360 601 233 361 793 639 366 758 608 371 091 116 372 425 65 374 511 68 374 787 70 376 723 75 423 110 320 428 883 419
360 602 233 361 805 639 366 760 608 371 103 116 372 441 61 374 512 68 374 790 70 376 725 75 423 155 354 428 890 419
360 604 233 361 809 639 366 762 608 371 106 116 372 445 65 374 525 68 374 791 70 376 727 75 423 156 354 428 892 419
360 606 233 361 830 639 366 764 608 371 114 116 372 446 65 374 526 68 374 792 70 376 728 75 423 160 318 428 903 417
360 608 233 361 871 634 366 766 608 371 121 116 372 447 65 374 527 68 374 795 70 395 352 112 423 170 419 429 020 422
360 650 233 361 924 688 366 770 608 371 124 116 372 450 61 374 528 68 374 796 70 395 353 112 423 175 419 429 030 350
360 652 233 361 925 688 366 772 608 371 160 116 372 452 61 374 529 68 374 797 70 395 392 112 423 180 342 429 060 422
360 654 233 361 926 688 366 774 608 371 490 65 372 455 61 374 530 68 374 800 70 395 393 112 423 192 417 429 061 422
360 656 233 361 927 688 366 776 608 371 492 65 372 460 61 374 531 68 374 801 70 401 020 412 423 220 334 429 062 422
360 658 233 361 932 688 366 810 615 371 494 65 372 462 61 374 532 68 374 802 70 401 050 410 423 226 419 429 063 422
360 700 234 361 936 688 366 815 615 372 020 116 372 464 61 374 533 68 374 929 64 401 090 413 423 270 342 429 064 422
360 702 234 361 939 688 366 820 615 372 030 116 372 465 61 374 534 68 374 930 64 401 100 413 423 280 422 429 100 419
360 704 234 361 979 634 366 825 615 372 040 116 372 466 61 374 535 68 374 932 64 401 110 413 423 283 422 429 103 419
360 706 234 362 006 633 366 830 615 372 047 116 372 469 61 374 536 68 375 012 660 401 220 410 423 285 422 429 140 422
360 708 234 362 101 640 366 835 615 372 070 116 372 470 61 374 537 68 375 013 661 401 260 409 423 286 422 429 182 322
360 750 234 362 299 636 366 840 615 372 072 116 372 472 61 374 538 68 375 014 661 401 270 409 423 290 324 429 183 322
360 752 234 362 301 631 366 845 615 372 074 116 372 475 61 374 539 68 375 021 110 401 280 409 423 293 419 429 264 419
360 754 234 362 303 631 366 911 612 372 084 116 372 480 61 374 540 68 375 031 110 401 300 410 423 297 342 429 268 419
360 756 234 362 305 631 366 913 612 372 089 116 372 483 61 374 541 68 375 051 110 401 302 410 423 305 354 429 500 414
360 758 234 362 307 631 366 916 612 372 097 116 372 485 61 374 542 68 375 081 110 402 000 519 423 310 354 429 820 419
360 760 226 362 309 631 366 917 612 372 100 116 372 487 61 374 543 70 375 101 110 402 102 413 423 631 419 429 830 425
360 762 226 362 311 631 366 920 613 372 105 116 372 489 61 374 544 70 375 201 111 402 103 413 423 632 419 429 833 425
360 764 226 362 313 631 366 921 613 372 120 116 372 491 61 374 545 70 375 321 86 413 010 412 423 634 356 429 835 425
360 766 226 362 315 631 366 931 612 372 130 116 372 493 61 374 546 70 375 323 86 413 020 412 425 000 415 429 843 425
360 768 226 362 403 632 366 933 612 372 134 116 372 494 61 374 547 70 375 324 87 413 410 412 425 010 415 429 860 354
360 769 226 362 405 632 366 936 612 372 135 116 372 495 60 374 548 70 375 325 87 413 810 412 425 020 415 429 879 426
360 770 226 362 407 632 366 937 612 372 138 116 372 496 60 374 549 68 375 330 86 414 000 190 428 045 419 429 880 426
360 772 226 362 409 632 366 940 613 372 140 116 372 497 60 374 550 68 375 331 86 416 140 411 428 046 419 429 881 426
360 774 226 362 411 632 366 941 613 372 142 116 372 498 60 374 553 70 375 334 87 416 150 411 428 110 322 429 882 426
360 776 226 362 413 632 366 952 614 372 148 116 372 500 106 374 554 70 375 335 87 416 200 411 428 111 322 429 883 426
360 778 226 362 415 632 366 953 614 372 149 116 372 520 58 374 555 70 375 339 87 417 260 409 428 397 350 429 884 426
360 780 226 362 501 631 367 000 635 372 150 116 372 521 58 374 560 70 375 340 87 417 380 409 428 398 350 429 885 426
Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page
429 887 426 436 910 444 448 210 431 449 736 438 470 037 366 551 043 95 551 960 94 606 612 304 611 186 622 666 369 637
429 920 424 436 920 444 448 212 431 449 737 438 470 038 366 551 045 95 552 528 122 606 614 304 611 199 618 666 370 637
429 925 424 436 930 444 448 214 431 449 800 434 470 039 366 551 046 122 552 529 122 606 616 304 611 200 618 666 371 637
429 930 424 436 980 444 448 216 431 449 801 434 470 040 366 551 048 123 552 566 122 606 618 304 611 202 618 666 372 637
429 935 424 437 000 444 448 219 431 449 802 434 470 041 366 551 050 122 601 020 84 606 620 305 611 203 618 666 373 637
429 945 424 437 020 444 448 220 431 449 803 434 470 042 366 551 051 123 601 022 84 606 700 551 611 205 618 666 374 637
429 976 424 437 080 444 448 222 431 449 804 434 470 043 366 551 054 122 601 024 84 606 705 551 611 207 618 666 375 637
429 977 424 437 160 444 448 224 431 449 810 434 470 044 366 551 055 122 601 059 84 606 710 551 611 215 618 666 376 637
429 984 424 437 180 444 448 226 431 449 811 434 470 051 367 551 058 123 601 103 77 611 000 616 611 217 618 666 377 637
429 995 419 437 200 444 448 229 431 449 812 434 470 053 366 551 059 122 601 107 77 611 001 616 611 218 618 667 135 620
430 005 419 437 205 444 448 230 431 449 813 434 470 058 366 551 062 122 601 111 77 611 002 616 611 250 622 667 536 620
430 006 419 437 210 444 448 232 431 449 820 434 492 030 454 551 074 123 601 113 77 611 003 616 611 300 611 668 090 609
430 015 426 437 215 444 448 234 431 449 821 434 492 032 454 551 079 123 601 115 77 611 004 616 611 302 610 668 091 609
430 020 426 437 220 444 448 239 431 449 822 434 492 034 454 551 082 123 601 117 77 611 005 616 611 304 611 668 092 609
430 025 426 437 260 444 448 240 431 449 823 434 492 036 454 551 086 123 601 119 77 611 006 616 611 306 610 668 093 609
430 026 426 437 400 429 448 242 431 449 832 434 492 100 452 551 090 123 601 206 76 611 007 617 611 307 629 668 094 609
430 030 426 437 402 429 448 243 431 449 833 434 492 102 452 551 091 122 601 207 76 611 008 617 611 308 611 668 095 609
430 035 426 437 404 429 448 244 431 449 840 434 492 104 452 551 094 123 601 209 76 611 009 617 611 310 610 668 096 609
430 040 426 437 406 429 448 245 431 449 841 434 492 106 452 551 099 123 601 212 76 611 010 617 611 312 611 668 097 609
431 020 415 437 500 428 448 246 431 449 842 434 492 108 452 551 101 123 601 216 76 611 011 617 611 314 610 780 000 295
434 020 442 437 502 428 448 247 431 449 843 434 492 110 452 551 110 108 601 218 76 611 012 617 611 316 611 780 001 295
434 021 443 437 504 428 448 248 431 449 850 434 492 112 452 551 114 123 601 220 76 611 013 628 611 318 610 780 002 295
434 100 442 437 506 428 448 249 431 449 851 434 492 114 452 551 119 123 601 222 76 611 014 628 611 319 629 780 003 295
434 101 443 437 508 428 448 250 431 449 852 434 492 116 452 551 120 108 601 225 76 611 015 619 611 320 611 780 004 295
434 108 442 437 510 428 448 252 431 449 860 434 492 118 452 551 160 95 601 230 26 611 016 620 611 322 610 780 005 295
434 109 443 437 512 428 448 253 431 449 861 434 492 120 453 551 162 95 601 232 26 611 017 621 611 324 611 780 008 295
434 110 442 437 514 428 448 254 431 449 862 434 492 122 453 551 165 95 601 234 26 611 018 628 611 326 610 780 014 296
434 111 443 437 516 428 448 255 431 449 870 434 492 124 453 551 167 95 601 236 26 611 019 617 611 327 629 780 015 296
434 120 442 437 518 428 448 260 431 449 871 434 492 126 453 551 200 108 601 237 26 611 024 619 611 328 611 780 018 296
434 121 443 437 520 428 448 261 431 449 880 433 492 128 453 551 204 108 601 238 26 611 025 618 611 330 610 780 052 294
434 130 442 437 522 428 448 270 431 449 881 433 492 133 450 551 208 108 603 039 638 611 026 618 611 332 611 780 082 294
434 131 443 437 524 428 448 420 437 449 882 433 492 134 450 551 212 108 603 040 240 611 027 619 611 334 610 780 092 294
434 140 442 437 526 428 448 550 437 450 010 318 492 135 450 551 216 108 603 042 240 611 029 619 611 336 611 780 102 294
434 141 443 437 528 428 448 810 437 450 020 342 492 136 450 551 220 95 603 110 646 611 036 620 611 338 610 780 152 294
434 145 442 437 530 428 448 950 437 450 150 360 492 137 450 551 223 95 603 480 474 611 037 621 611 340 611 780 252 294
434 149 442 437 532 428 449 040 439 450 190 382 492 140 453 551 224 95 603 481 474 611 044 619 611 342 610 780 281 294
434 150 442 437 534 428 449 041 440 450 230 382 492 142 453 551 226 95 603 483 474 611 047 620 611 344 611 780 294 294
434 151 443 437 536 428 449 050 439 450 240 322 492 144 453 551 228 95 603 491 473 611 048 619 611 346 610 780 302 294
434 160 442 437 538 428 449 051 440 450 250 324 492 146 453 551 230 95 603 493 473 611 049 620 611 356 611 780 352 294
434 161 443 442 100 415 449 080 439 450 280 320 492 148 453 551 232 95 604 000 505 611 054 618 611 358 611 780 452 294
434 165 442 442 280 436 449 100 439 450 350 382 492 152 453 551 234 95 604 002 505 611 057 618 611 365 624 780 482 294
434 166 443 442 290 436 449 101 440 450 390 322 492 154 451 551 236 95 604 005 505 611 058 625 611 368 625 780 492 294
434 170 442 442 300 436 449 110 439 450 400 320 492 155 454 551 238 95 604 010 505 611 061 618 611 370 619 780 502 294
434 171 443 442 400 436 449 111 440 450 510 356 492 157 451 551 252 95 604 011 505 611 068 616 611 381 621 780 552 294
434 180 442 442 420 436 449 120 439 450 810 320 492 158 451 551 254 95 604 012 556 611 069 616 611 382 621 780 682 294
434 181 443 442 430 437 449 121 440 450 820 382 492 159 451 551 255 100 604 013 556 611 071 616 611 400 605 780 693 294
434 190 442 442 600 436 449 130 439 451 100 383 492 160 452 551 256 100 604 015 506 611 083 617 611 401 605 780 702 294
434 191 443 442 610 436 449 131 440 451 130 383 492 915 424 551 257 100 604 017 506 611 091 626 611 402 605 780 752 294
434 193 442 442 790 436 449 140 439 451 150 383 492 940 455 551 290 100 605 008 408 611 093 626 611 410 605 780 892 294
434 200 442 442 800 437 449 141 440 451 200 383 492 950 455 551 291 100 605 009 408 611 094 626 611 411 605 780 902 294
434 201 443 442 820 437 449 150 439 451 220 383 492 952 455 551 292 100 605 010 408 611 099 625 611 412 605 780 952 294
434 210 442 442 850 436 449 151 440 451 250 383 492 954 455 551 293 100 605 177 196 611 100 618 611 700 607 781 082 294
434 211 443 442 900 436 449 160 439 451 300 383 492 955 451 551 294 100 605 280 704 611 101 627 611 702 607 781 089 294
434 220 442 442 940 436 449 161 440 451 350 383 493 150 703 551 295 100 605 902 253 611 102 627 611 704 607 781 102 294
434 221 443 443 050 445 449 170 439 451 380 383 493 200 703 551 296 100 605 904 253 611 106 627 611 710 607 781 152 294
434 230 442 443 062 445 449 200 439 451 400 383 494 010 449 551 297 100 605 905 253 611 107 627 611 712 607 781 302 294
434 231 443 443 070 445 449 201 440 451 460 383 494 015 449 551 298 100 605 906 253 611 110 629 611 714 607 781 352 294
434 240 442 443 090 445 449 210 439 451 500 383 494 020 449 551 307 100 605 907 253 611 111 629 611 750 629 781 502 294
434 250 442 443 140 445 449 211 440 470 000 366 494 025 449 551 308 100 606 396 305 611 127 619 660 016 632 781 552 294
434 251 442 443 200 445 449 220 439 470 001 366 494 030 449 551 309 100 606 398 305 611 128 630 660 017 635 781 752 294
434 252 443 443 270 445 449 221 440 470 002 366 494 040 449 551 310 100 606 399 305 611 130 630 660 018 635 781 952 294
434 253 443 443 280 445 449 240 439 470 003 366 494 050 449 551 320 100 606 400 305 611 132 630 660 168 632 790 008 295
434 260 442 443 300 445 449 241 440 470 004 366 494 060 449 551 321 100 606 449 305 611 139 619 660 245 632 790 012 296
434 270 442 443 660 437 449 250 439 470 005 366 494 070 449 551 322 100 606 450 305 611 140 618 660 431 635 790 013 296
434 271 443 443 670 437 449 300 439 470 006 366 494 080 449 551 323 100 606 451 305 611 141 616 661 751 635 790 018 296
434 280 442 445 990 435 449 301 440 470 007 366 494 110 449 551 435 123 606 452 305 611 142 618 661 822 635 790 102 293
434 281 443 446 000 435 449 310 439 470 008 366 494 115 449 551 436 123 606 453 305 611 143 618 661 833 635 790 152 293
434 290 442 446 010 435 449 311 440 470 009 366 494 120 449 551 441 134 606 454 305 611 144 618 661 839 635 790 352 293
434 291 443 446 020 435 449 330 439 470 010 366 494 125 449 551 443 134 606 456 305 611 146 617 662 688 624 790 502 293
434 295 442 446 030 435 449 331 440 470 011 366 494 130 449 551 445 134 606 457 305 611 147 617 662 689 624 790 552 293
434 500 441 446 040 435 449 334 439 470 012 366 494 140 449 551 447 134 606 458 305 611 149 617 663 921 632 790 702 293
434 502 441 446 100 435 449 400 439 470 013 366 494 150 449 551 451 134 606 459 305 611 153 618 664 320 635 790 752 293
434 503 441 446 110 435 449 401 440 470 014 366 494 160 449 551 452 134 606 460 305 611 156 618 664 508 632 790 902 293
434 505 441 446 120 435 449 420 439 470 015 366 494 170 449 551 457 134 606 461 305 611 157 618 664 651 632 790 952 293
434 507 441 446 130 435 449 440 439 470 016 366 494 180 449 551 462 134 606 491 569 611 158 622 666 355 637 791 152 293
434 508 441 446 150 435 449 461 439 470 018 366 510 548 659 551 467 134 606 503 305 611 161 623 666 356 637 791 352 293
434 530 441 446 240 435 449 700 438 470 019 366 510 552 665 551 477 134 606 504 305 611 163 619 666 357 637 791 548 293
434 532 441 446 250 435 449 702 438 470 020 366 510 578 658 551 909 94 606 505 305 611 167 619 666 358 637 905 070 427
434 533 441 446 260 435 449 703 438 470 023 366 550 997 122 551 910 94 606 506 305 611 168 619 666 359 637 905 071 427
434 534 441 446 600 435 449 704 438 470 024 366 550 998 122 551 919 94 606 590 305 611 169 622 666 360 637 905 072 427
434 535 441 446 620 435 449 705 438 470 025 366 550 999 122 551 920 94 606 594 305 611 178 622 666 361 637
434 537 441 446 630 435 449 706 438 470 027 366 551 000 122 551 929 94 606 596 305 611 179 622 666 362 637
434 538 441 446 700 435 449 707 438 470 029 366 551 002 122 551 930 94 606 598 305 611 180 622 666 363 637
436 199 446 446 720 435 449 730 438 470 030 366 551 006 123 551 939 94 606 600 304 611 181 622 666 364 637
436 200 446 448 200 431 449 732 438 470 031 366 551 010 122 551 940 94 606 602 304 611 182 622 666 365 637
436 894 444 448 202 431 449 733 438 470 032 366 551 022 95 551 949 94 606 604 304 611 183 622 666 366 637
436 900 444 448 204 431 449 734 438 470 035 366 551 025 95 551 950 94 606 606 304 611 184 622 666 367 637
436 905 444 448 207 431 449 735 438 470 036 366 551 032 122 551 959 94 606 610 304 611 185 622 666 368 637
Subsidiaries
France Runion Island Belgium
ETANCO Le Pecq RFIX ETANCO Benelux
Head office + 0262 430 880 + 32 3 354 15 00
info@r-fix.com info@etanco.be
GENERAL CATALOGUE
International Sales Italia United Kingdom
GENERAL CATALOGUE
TEL : +33 1 34 80 52 08
FAX : +33 1 34 80 52 40 SI.COP s.r.l. FRIULSIDER UK LTD
export@etanco.fr +39 02 990 480 62 + 01792 561911
info@sicopsrl.com sales@friulsider.co.uk
Production sites
France
Aubergenville (78) x 2
Magnac-bourg (87)
Saint Germain-Les-Belles (87)
Italia
San Giovanni
Catalogues Booklets
Cladding Wood Anchors Roofing Waterproofing Facade Structural works Safety Solar Over-roofing
EN 14592:2009
Code : 510 561 000
EN 14592:2009
www.etanco.eu