Академический Документы
Профессиональный Документы
Культура Документы
D
I
S
U
S
U
N
OLEH :
Preprocessor > Modeling > Create > Rectamgle > By 2 Corners > X=0,
Y=0,Width=1,Height=1
BLC4,0,0,1,1
Preprocessor > Element Type > Add/Edit/Delete > Click Add > Select Thermal Solid,Quad
4 Node 55
ET,1,PLANE55
4. Element Material Properties
Preprocessor > Material Props > Material Model > Thermal > Conductivity >
5. Mesh Size
Preprosessor > (Meshing ) > Size Cntrls > (Areas) > All Areas > 0.05\
AESIZE=0.05
6. Mesh
Preprocessor > Mesh > Areas
AMESH,ALL
Solution Phase : Assigning Loads and Solving
1. Difine Analisys Type
Solution > New Analysis > Steady-Stead
2. Apply Constraints
Solution > (Loads) Apply > (Thermal) Temperature > On Lines
Select the top line of the block and constrain it to a constan value of 500
Using same menthod, constrain the left side of the block to a constan value of 100
3. Apply Convection Boundary Conditions
Solution > ( Loads) Apply > (Thermal) Convection > On Lines
Select the right side of the block
4. Apply Insulated Boundry Conditions
Solution > (Loads) Apply > (Thermal) Convection > On Lines
select the bottom block
5. Solve The System
Solution > Solve > Current LS