Академический Документы
Профессиональный Документы
Культура Документы
optimus red
Sound Level Meters for Noise at Work
& Occupational Noise Measurements
The optimus red sound level meters use the very latest digital technology and industrial design to give you
the ideal instrument for Occupational and Industrial Hygiene noise measurements.
Applications For Occupational Noise and Industrial Hygiene,
Occupational & Industrial Hygiene Noise measuring the noise exposure of employees
Evaluations quickly and reliably is essential. The optimus red
Noise at Work Surveys & Noise Exposure sound level meters are the ideal instrument for
Calculations these applications with a clear, high resolution
Hearing Protector Selection using HML or OLED colour screen, a wide 120dB measurement
Octave Band Methods span (up to 140dB(A) and 143dBC Peak) and
simultaneous measurement of all available
Machinery Noise Tests
parameters.
Noise Ordinance & Community Noise
Assessments Theres no setup or complicated configuration
needed. Just switch on, calibrate and press start.
General Noise Measurements
Its that simple.
Key Features
Simple operation with an ergonomic design VoiceTag audio recording
Simultaneous measurement of all workplace Before each measurement is made, you can
noise parameters with additional two virtual record a VoiceTag by simply speaking into the
noise meters microphone.
VoiceTag note recording You can record notes about the measurement
AuditStore measurement verification location, describe what is being measured or
Latest digital technology with a high resolution simply store information that may be useful at a
colour OLED display and back-lit keypad later date.
Measure up to 140dB(A) and 143dB(C) Peak The ideal instrument for any application
with a single measurement range
With two additional virtual noise meters running
Real-time 1:1 Octave Band Filters at the same time, you can meet any noise
NR & NC values & curves on screen regulation, guideline or standard.
Pause & Back Erase as standard Whether you need to meet the UK and EU
Very large 4GB memory which can store over Regulations, measure to OSHA HC & PEL, MSHA,
10,000 measurements ACGIH or any other regulation, an optimus red is
Long battery life the ideal instrument.
Measure up to 170dB with the optional
cr16x/05/12/r4EN
MV:200EH microphone system
Simple operation with advanced technology
The optimus sound level meters have youre wearing gloves.
been designed with ease of use as the The measurement data is displayed in a
most important feature which lets you clear and simple format along with a real-
get on with measuring and controlling time noise chart so that you can see how
the noise. the noise varies with time.
The instruments use the very latest in All of the functions of the instrument
digital technology and industrial design are measured simultaneously, and with
techniques to make everything as clear a wide 120dB measurement span you
and simple as possible. dont need to worry about choosing the
The high resolution colour OLED screen right range. An optimus can measure
can be seen in any conditions, and the up to 140dB(A) and 143dB(C) Peak in this
keypad illuminates automatically in low single range.
light. Just switch on, calibrate and you are
The case is robust and covered with ready to go.
a tactile finish so it can be used even if
If you are working to the UK Control of Noise Octave Band Filters for Noise
at Work Regulations or the EU Physical Agents Control & Selecting Hearing
(Noise) Directive, the Leq View gives you the Protection
information that you need. The CR:162C and CR:161C
The LAeq and LCPeak values are measured at the instruments also feature real-
same time which allow the LEP,d (LEX,8h) and the time octave band filters which will
Peak Action Levels to be determined. measure the noise in 10 different
Instrument Selection
VoiceTag NR & NC
Function/ Sound Level Leq/Peak TWA/Dose Data Pause & 1:1 Octave Software
Class 1 Class 2 AuditStore Note Curves on Measurement Kit
Instrument Functions Functions Functions Logging Back Erase Band Filters Support
Recording screen
CR:162A CK:162A
CR:161A CK:161A
CR:162B CK:162B
CR:161B CK:161B
CR:162C CK:162C
CR:161C CK:161C
CR:162D CK:162D
CR:161D CK:161D
Standard Accessories Measurement Kits
The optimus sound level meters are supplied, as standard, with the following accessories: The optimus sound level meters are available as a complete measurement kit with the following accessories:
User Manual optimus Sound Level Meter
Certificate of Calibration CR:514 Class 2 or CR:515 Class 1 Acoustic Calibrator
USB Data/Power Cable UA:237 90mm Windshield
Windshield CK:300 Carrying Case
NoiseTools Software CD (Requires B, C or D Version to download measurements) User Manual & Certificates of Calibration
USB Data/Power Cable & NoiseTools Software CD (Requires B or C Version to download measurements)
Acoustic House
Bridlington Road
Hunmanby
North Yorkshire
YO14 0PH
United Kingdom ISO 14001:2004 ISO 9001:2008
EMS 552104 FM 531001
T: 0845 230 2434 (UK) Member
+44 1723 891655
F: +44 1723 891742
E: sales@cirrusresearch.co.uk BRITISH
SAFETY
cr16x/05/12/r4EN W: www.cirrusresearch.co.uk COUNCIL