Академический Документы
Профессиональный Документы
Культура Документы
Handling Equipment
Power Tongs Spinning Wrench Kelly Spinner Pipe Racking System
Hydraulically powered tongs make Spinning drill pipe and drill collars Model 6600 (air operated ) and The PRS-6 is a two arm racker
up and break out drill pipe tool from 2 7/8 to 9 OD with no Model 6800 (hydraulically designed to rack fourbles of
joints and drill collars from 4 to 8 adjustments necessary. operated) can be used for drill pipe and triples of casing.
OD. Torque can be pre-set to the Size range: 2 7/8 to 9 OD, rotating drill pipe slowly for This racker is capable of pick-up
required value. Required hydraulic Required hydraulic fluid flow: limited rat hole and mousehole and laydown operations for off-
fluid flow [114-133 lpm at 135 Bar]. 110-170 lpm at 135 Bar, drilling and for fast making line stand building while
Size range [4 8 (102-203mm)] Speed (5 DP): 100 rpm, kelly connection. Unit can spin in eliminating the need for a
Make up torque 63.000 ft-lbs Torque (5DP): 900-1000 ft-lbs ( and spin out. separate PLS and powered
[(85.000 N-m)] Break out torque 1215-1350 N m) Difference between air and Foxhole system.
75.000 ft-lbs [(101.000 N-m)] hydraulically operater kelly spiner
is in the drive motor and auxiliary
equipment (valves, hose,
manifold and discharge lines)