Академический Документы
Профессиональный Документы
Культура Документы
3)
1)
Remarks Weight Units per
Type No. Description
mm | inches approx. kg | lb antenna
85010002 1 clamp Mast diameter: 110 220 | 4.3 8.7 2.7 | 6.0 2
85010003 1 clamp Mast diameter: 210 380 | 8.3 15.0 4.8 | 10.6 2
85010008 1 downtilt kit Downtilt angle: 0 8 4.3 | 9.5 1
86010154 Site Sharing Adapter 3-way (see figure below) 0.65 | 1.4
86010155 Site Sharing Adapter 6-way (see figure below) 1.35 | 3.0
Accessories (included in the scope of supply)
738546 1 clamp Mast diameter: 42 115 | 1.7 4.5 1.1 | 2.4 2
2693 | 106.0
2721 | 107.1
2761 | 108.7
86010153 FlexRET
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.
Material: Reflector screen: Aluminum.
936.4631/c ngmn 04.18.02.03 Subject to alteration.
Fiberglass housing: It covers totally the internal antenna components. The special
design reduces the sealing areas to a minimum and guarantees the best weather
protection. Fiberglass material guarantees optimum performance with regards to stability,
stiffness, UV resistance and painting. The color of the radome is light grey.
All nuts and bolts: Stainless steel or hot-dip galvanized steel.
Grounding: The metal parts of the antenna including the mounting kit and the inner conductors are
DC grounded.
All dimensions
Site Sharing Adapter Site Sharing Adapter in mm | inches
3-way 6-way
AISG AISG
Layout of interface:
Left Right
Y1 Y1 R2 R2 Y3 Y3
169 | 6.7 *
195 | 7.7 *
Y2 Y2 R1 R1 Y4 Y4
104 | 4.1
8 7 2 1 12 11
54 | 2.1
124 | 4.9
224.5 | 8.8
325 | 12.8
377 | 14.8 *
Bottom view
* Dimensions refer to radome
All dimensions in mm | inches
Correlation Table
R2
Frequency range Array Connector
936.4631/c ngmn 04.18.02.03 Subject to alteration.
Y1 Y3
R1
Left Right
Any previous data sheet issues have now become invalid. 80010899 Page 5 of 5
www.kathrein.com
KATHREIN-Werke KG Anton-Kathrein-Strae 1-3 P.O. Box 10 04 44 83004 ROSENHEIM GERMANY Phone +49 8031 184-0 Fax +49 8031 184-820
Mounting Hardware
Clamp Included in the Scope of Supply
152 [5.98]
100 [3.94]
[0.790.98]
40 [1.57]
72 [2.83]
2025
40 [1.57]
15
21
4 4.53]
5
[1.6
M10 MA = 25 Nm
M8 MA = 20 Nm
35 [1.38]
64 [2.52]
125 [4.92]
2025
[0.790.98]
Subject to alteration.
936.3920/c
Please note: Kathrein does not recommend to use counter nuts. All dimensions in mm and [inches]
The additional nuts supplied are only meant as spares.
Any previous data sheet issues have now become invalid. 738546 Page 1 of 1
www.kathrein.de
KATHREIN-Werke KG Anton-Kathrein-Strae 1-3 P.O. Box 10 04 44 83004 ROSENHEIM GERMANY Phone +49 8031 184-0 Fax +49 8031 184-820
FlexRET
A flexible, integrated solution for adjusting the electrical downtilt of Kathrein FlexRET antennas.
manually addressed, the serial number has to be extended by the corresponding colour coding extension
(e.g. CSG351234-R1). The respective information can be found on the site documentation which is
included in the scope of supply.
Startup of FlexRET
The FlexRET module included in the antenna is preconfigured with the following information:
Antenna model no., Antenna Serial no., Antenna configuration data. After connecting a control
cable and scanning the antenna line devices (ALD) the used primary (e.g. NodeB, ALC, etc.)
will find the FlexRET. You only need to insert your additional data.
Connect a control cable to the daisy chain input of the FlexRET. The tightening torque for fixing the
connector must be 0.5 1.0 Nm (hand-tightened).
The connector should be tightened by hand or by a special torque screw driver (order no.
85010080).
See also data sheet for Kathrein AISG-cable (86010007, ...).
Please note: To ensure the tightness of the RET System, Kathrein recommend the use of
Kathrein components only.
Please note: If the daisy chain output is not used, do not remove the protection cap.
For daisy chain operation, remove the protection cap and attach a control cable to interconnect
with the daisy chain input of the subsequent FlexRET or external RCU.
Please note: Do not remove the protection cap on the daisy chain output of the last FlexRET
or RCU device.
Subject to alteration.
936.4643/b
' !!!
*,/%,1
(+$"%!(,)')AE$)'*!(4%')$#((* ))$)$!!$,#),$
$#)$#(39A:(+".#$)*('"*!#)''#2#9B:)(+"*()%)#.
#)''#'+2#!*##)''#))".*(*#('$%')$#4
*,/%,+/
$)3(&*%"#)(#)()#$*#)$$"%!.,))!")($'!(()!+2
%*'(*#))$%')AE$)*!(4(!")('(#)$%'$+'($#!%'$))$#
#()'"*!#)''##'(#)!#()!!)$#4(&*%"#)#')(2*((##
')'$'&*#.#'.#2#$)#()!!#*(#$'#,))#()'*)$#(2".
*('"*!#)''#)$'$$""*#)$#(4$,+'2)'(#$*'#)))
#)''#,!!#$)$*'#%')*!'#()!!)$#4 )(&*%"#)$(*('"*!
#)''#)$'$$')!+($#'%)$#2,#)'"#.)*'##)&*%"#)$
#$#2)*('(#$*')$)'.)$$''))#)''#.$#$'"$'$)$!!$,#
"(*'(3
8$'#)$''!$))'+##)##4
8 #'()(%')$#),#)&*%"#)#'+'4
8$##))&*%"#)#)$#$*)!)$#'*)'#)'$")))$,)'+'(
$##)4
8$#(*!))!'$'#-%'#'$6)##$'!%4
&
!0%,%.
&++.
(!(()!%%')*($"%!(,)## 7@@C4
)%%'!#*"'&*!!((()$#$'"!#$'"
7@@C*#4
936.4643/b
*,/%-,( !!!)
;#.<#($'"$)$#(#$)-%'((!.%%'$+.)%').'(%$#(!$'$"%!#$*!
+$)*('5(*)$').)$$%'))&*%"#)4
Type of Equipment:
Subject to alteration.
936.4643/b