Академический Документы
Профессиональный Документы
Культура Документы
Accessories
Autocollimator is an easy-to-use but precise metrology instrument
for angularity, parallelism, perpendicularity, straightness of precision Case for Autocollimator LED Illuminator AC-L1
Aluminum storage case for Autocollimator LED illumination unit for retrotting onto
components, machine guide-way and many other applications. Vieweld diagram (6B-LED) Vieweld diagram (6D-LED)
6D/6B and 6D-LED/6B-LED. Autocollimator 6B/6D illumination unit.
Features
Efcient measurement because the
autocollimator needs only the setting of a
target mirror and collects reected light rays.
Vertical and horizontal axis values can be
measured simultaneously.
Plane Mirror C Pentaprism
LED illuminator Both sides are perfectly parallel, permitting its Turns the optical axis of the autocollimator
The Autocollimator 6B-LED and 6D-LED use as a reference for non-reective surface. exactly 90 for use as an optical square to
can operate on two AA batteries. This new Also useful for measuring extremely small measure the squareness of two surfaces.
function enables the instruments used in the angles where a smaller mirror is desirable.
Guaranteed accuracy (optical right angle):
environment where AC power is not available. Outer diameter: 30 mm Thickness: 12 mm 2 seconds of arc
Parallelism: 2 seconds of arc Dimensions: 65 x 65 x 45 mm
Wooden case provided Metal frame and wooden case provided
1 second of arc within a range of 30 minutes of arc 8-sided Polygon Mirror 12-sided Polygon Mirror
522
Vieweld 6B-LED: bright-eld, 6D-LED: dark-eld Measuring the radius of curvature for Precisely divides 360 into 8 equal parts Accurately divides 360 into 12 equal parts
46
88
Light source LED convex and concave surfaces to check for eccentricity and errors in to check for eccentricity and errors in
65
goniometers and other angle gauges. goniometers and other angle gauges.
75-470
Overall length: Approx. 490 mm ring. This function allows measurement of the compensated values compensated values
232
radius of curvature for convex and concave Outer diameter: 117 mm Outer diameter: 117 mm
Weight (including stand) Approx. 32 kg 158 200 240
Diameter of center hole: 20 mm Diameter of center hole: 20 mm
surfaces. Thickness: 46 mm Wooden case provided Thickness: 46 mm Wooden case provided
*Batteries are unchargable with this system.
Typical Examples of Use
Check the angular accuracy of Check the deection of elastic Check the parallelism of
rotary tables or springy materials end surfaces Check the angle of work pieces
Autocollimator Autocollimator
Autocollimator
Work piece to be
Autocollimator Elastic or measured
Octahedral springy material
mirror End surface End surface Standard
(reective) (reective) Standard angle block Standard surface
reecting surface
Rotary table
Measure the accuracy of rotary Afx the mirror the specimen and Compare the difference between Measure the difference between
tables or dividing heads using read the angular deection using the crosshair images reected from the crosshair images reected from
polygon mirrors. the autocollimator. Small vibrations the surface of the specimen and the end surface of the work piece
The octahedral mirror measures in may also be detected in this from a standard surface. and from a standard angle block.
units of 45, and the dodecahedral manner.
mirror in units of 30.
Compare the reading difference Attach a plane mirror, either directly Compare the readings taken from
between the standard reecting or on a stand. to the moving plane mirror 'a' on surface 'A' to
surface and the surface of the part and read deviation from the those from plane mirror 'b' on
specimen using the Pentaprism. reection. surface 'B' through the Pentaprism.
Specications and equipment are subject to change without any notice or obligation on the part of the manufacturer. September 2012 2008/2012 NIKON CORPORATION
N.B. Export of the products* in this catalog is controlled under the Japanese Foreign Exchange and Foreign Trade Law. Appropriate export procedures shall be required in case of export from Japan.
*Products: Hardware and its technical information (including software)
NIKON CORPORATION
Shin-Yurakucho Bldg., 12-1, Yurakucho 1-chome
Chiyoda-ku, Tokyo 100-8331 Japan
phone: +81-3-3216-2384 fax: +81-3-3216-2388
http://www.nikon.com/instruments/
NIKON METROLOGY, INC. NIKON SINGAPORE PTE LTD. NIKON METROLOGY UK LTD.
12701 Grand River Avenue, Brighton, MI 48116 U.S.A. SINGAPORE phone: +65-6559-3618 fax: +65-6559-3668 UNITED KINGDOM phone: +44-1332-811-349 fax: +44-1332-639-881
phone: +1-810-220-4360 fax: +1-810-220-4300 NIKON MALAYSIA SDN. BHD. E-mail: sales_uk@nikonmetrology.com
E-mail: sales_us@nikonmetrology.com NIKON METROLOGY SARL
MALAYSIA phone: +60-3-7809-3688 fax: +60-3-7809-3633
http://us.nikonmetrology.com/ FRANCE phone: +33-1-60-86-09-76 fax: +33-1-60-86-57-35
http://www.nikoninstruments.com/ NIKON INSTRUMENTS KOREA CO., LTD.
E-mail: sales_france@nikonmetrology.com
KOREA phone: +82-2-2186-8400 fax: +82-2-555-4415
NIKON METROLOGY EUROPE NV NIKON METROLOGY GMBH
Geldenaaksebaan 329, 3001 Leuven, Belgium NIKON INDIA PRIVATE LIMITED
GERMANY phone: +49-6023-91733-0 fax: +49-6023-91733-229
phone: +32-16-74-01-00 fax: +32-16-74-01-03 INDIA phone: +91-124-4688500 fax: +91-124-4688527
E-mail: sales_germany@nikonmetrology.com
Email: sales_europe@nikonmetrology.com NIKON CANADA INC.
http://www.nikonmetrology.com/ CANADA phone: +1-905-602-9676 fax: +1-905-602-9953
NIKON INSTRUMENTS (SHANGHAI) CO., LTD. NIKON INSTRUMENTS S.p.A.
CHINA phone: +86-21-6841-2050 fax: +86-21-6841-2060 ITALY phone: +39-055-300-96-01 fax: +39-055-30-09-93
(Beijing branch) phone: +86-10-5831-2028 fax: +86-10-5831-2026
(Guangzhou branch) phone: +86-20-3882-0550 fax: +86-20-3882-0580