Академический Документы
Профессиональный Документы
Культура Документы
Product Feature
Using the whole structure cooling technology, obtain efficient cooling performance;
Double coupling technology to achieve IP68 protection level, ultra high waterproof dust capacity
Ultra RobustTechnology, single damage, other particle distribution of current constant
Useing flip chips technology for LEDS to avoid bolt die lamp risk
Human learning efficacy with light, realization, intensity of illumination and equality of
brightness road lighting effect.
Application
Street lightingPark lightingRoad lighting
1
Catalog
Advantage of Technique3
Light distribution
curve5
Product
drawing5
Product No.6
2
Advantage of Technique
Thermal cellular effect of heat dissipation Whole structure of the cooling Simple tool maintenance
Imitate the honeycomb briquet, the cooling Originally only play a supporting role is clever use With special structural design, make lamps
principle of solid coal because of the center are of stents, make its thermal conductivity stent, give and lanterns of components (mainly module
not exposed to air, burning slow and inadequate, was the module heat conduction structure effect of and power supply) can tear open outfit using
after do the hole in the center, as a result of air lamp shell, make its radiator cooling assist module, simple tools, humanized considering the
convection, fast burning, it is burning hot structure surface area make full use of rise, to installation environment are all high
honeycomb effect. Similarly to originally the whole participate in the transfer heat to the air. altitude general high-power lamps and
radiator break up into each module, using thermal lanterns, starting from the convenience and
cellular effect, make the air convection, fully safety, as far as possible with the aid of
through the space between the module and tools.
quickly take away heat, can decrease the
temperature of 20 or so.
Double coupling IP68 protection High photosynthetic efficiency of LED light Free combination
Avoid screw structure was designed to avoid source Watts composed free to according to the
penetration of water vapor through the screw hole, This module USES Lumileds LUXEON TX series different requirements of power wattage of
bidirectional silicon rubber circle will completely lamp bead. This series of lights, has the following tie-in and different number of modules, the
cut off from the outside world LED lamp bead, put features: single high luminous flux, forward voltage lamps and lanterns of freely combine the
an end to all the water vapor erosion or other Vf value lower (average in 2.8 V @ 700 ma), low different power.
harmful gas lamp bead and PCB. thermal resistance (an average of 3 k/W), to fully
This product through the strict test, in addition to meet the strict requirements of lighting. The product
ordinary underwater testing, also can pass 100 through a series of reliability test verification, to
boiled water boiling red ink test, dual protection, ensure its within the rated the use of the
more than 30 minutes each have to undergo the environment, and the lamp bead Tj junction
test of boiled water test, after boiling, immediately temperature of 85 or less thermal environment
in the room temperature of cold water, use cold can work steadily.
snap to assess its waterproof ability. Dual
protection to undergo more than 3 hours 6 cycle
with boiled water and the quenching test.
3
Photoelectric parameters specifications
Install
Working Storage
No. Life time (h) House material Aperture Product dimensions (mm) Packing size (mm) NW(kg) GW (kg)
Environment temperature
(mm)
-40+50
T1F -40+50 >50000 Aluminum 57~63 435*190*80 490*250*145 2.65 3.19
10%90%RH
4
Lighting Curve
Lighting Curve
Product drawing
50mm
435
190 80 57-63mm
T1F
5
Installation instructions
4
M1025
(
()
()
1.24 2.2M1025 3.
M1025
4. 5.24
2M1025
M410
1. 2. 3. 4.,2M410
2M410 . .
.
6
Product Item No.
ExampleT1F-18-40-40-GY-1-GE
No. LED Qty Pwoer(W) CCT Color Lighting distribution Cable standard