Академический Документы
Профессиональный Документы
Культура Документы
26 October 2016
5:53 PM
E:\Migreringar\ISOS\vmware_isos\vSphere 6\HP :
In case of Preloaded OS
F2 Set the root password UN WSSBILo pw : AMDHGSTq04
Configure Network
o Configure Management Network
Network Adapter : Make sure all ports status is connected
If its disconnected, email it hardware team to connect all the ports ( You will
find the contact person details in GLOT audit trial )
Network Adapter : Select the Device Names ( vmnic1 / vmnic2 ) if its not working
check remaining combination ( For me vmnuc2/ vmnic3 worked )
Configure VLAN
Configure Ipv4 ( Select Static IPV4) --> Enter IP address/ Subnet / Gateway
IPv6 --> Disable Ipv6
DNS Configuration --> Primary / Alternative DNS /Host Name
Custom DNS Suffixes --> got.volvo.net
Login to vCentre
As per the GLOT Request select the right Datacentre Cluster Add host
Make sure Host is put under Maintenance Mode Disable all the alerts
Go to plug-ins Select the plug name
You will see new tab Update Manager
Click on Attach Baseline or Group Select the appropriate plug-ins
o --> VMware vSphere Update Manager Extension -- Enable
o ---> Update Manager
o --> Attach Baskline or group
o --> Select the ( Non-Critical and Critical Patches and 6.0 patching )
Extension Baselines
Upgrade Baselines
o Click On Scan ( Select Patches & Extensions ) one more option is Upgrades
o Click On Remediate To install patches -- Done
Go to Configuration Tab
Click on Networking --> Add Networking --> Select Virtual Machine/ Vmkernal
Virtual Machine ( Select this to handle Virtual Machine Network Traffic)
Vmkernal ( Select this to handle vSphere V Motion / iSCSI, NFS and Host
Management)
- Need to configure Storage (NFS) - This will helped to configure the Sys log
- ( Need to configure Tintri storage for Sys log )
- Go to Configuration tab
- Select Storage.
- Right-click on local datastore and select Browse.
- Create a uniquely-named directory for this ESX host (eg, .locker-ESXHostname) .locker-
segotv00318
- Close the Datastore Browser.
- Click Advanced Settings under Software.
- Select the ScratchConfig section.
- Change the ScratchConfig.ConfiguredScratchLocation configuration option, specifying
the full path to the directory. For example:
- /vmfs/volumes/segotv00318_Console/.locker-segotv00318
- Click OK.
- Reboot ESXi host for the configuration change to take effect
o Click on Net:,
- At Net.TcpIpHeapSize enter 32.
- At Net.TcpIpHeapMax enter 128.