Академический Документы
Профессиональный Документы
Культура Документы
tune Mhz) 022 CW AUTO MODE Selects whether the KEY jack shall be
Enabled or Disabled while us ing
ON/OFF OFF 067 PG C Program ming the [C] key (in the Operating
Function Row q (MFq)) function.
ATC
7 Menu Keys 15 Main Dial (select 027 CW PITCH Setting of the pitch of the CW
sidetone, BFO offset, and CW filter
400 ~ 800 Hz 700 Hz 072 PKT 9600 Adjusts the audio input level from the TNC
during 9600 bps Packet operation.
0 ~ 100 50
8 Mode (LSB <> USB <> 16 Main Display the PTT is keyed and the carrier is
transmitted during QSK operation
ms Packet baud rate to be used.
FM <> DIG <> PKT <> 030 CW SPEED Sets the sending speed for the built-in
Electronic keyer.
4 ~ 60 wpm
(1wpm /step)/20 ~
12 wpm (60 cpm ) 075 RF POWER SET Setting of the m axim um power level for the
current band.
5 ~ 100 2 ~ 100
(UHF)
2
MFb MW SKIP TAG MFk TUNE DWN UP 037 DIG GAIN Adjusts the audio input level from
terminal equipment during DIG
0 ~ 100 50 082 SSB STEP Selects the tuning steps for the SELECT
knob on the SSB m ode.
1kHz/2.5kHz/5kHz 2.5kHz
MFe TON/ENC ----/DEC TDCH MFn CFIL FIL-1 FIL-2 039 DIG SHIFT Defines the carrier frequency offset
during DIG (USER-L or USER-U)
3000 ~ +3000 Hz 0 Hz 084 TOT TIME Select the Tim e-Out Tim er tim e. OFF/1 ~ 20 (min) OFF
mode operation.
MFf ARTS SRCH PMS MFo PLY1 PLY2 PLY3 040 DIG VOX Sets the gain of the VOX circuitrys
input level for the DIG m ode.
0 ~ 100 0 085 TUNER/ATAS Selects the device (FC-30 or ATAS-100/-
120) to be controlled via the front panels
OFF/ATAS(HF)/AT
AS(HF&50)/ATAS(
OFF
MFg SCN PRI DW MFp DNR DNF DBF 041 DISP COLOR Selects the illumination color for each FIX: 26 086 TX IF FILTER
[A](TUNE) key.
Selects the Trans m it IF filter.
ALL)/TUNER
CFIL/FIL1/FIL2 CFIL
4 Home 12 Change Band 023 CW BFO Sets the CW carrier oscillator injection USB/LSB/AUTO
side on the CW mode.
USB 068 PG ACC Program ming the optional MH-59A8J
m icrophones [ACC] button assignm ent.
MONI
024 CW DELAY Sets the receiver recovery tim e during FULL/30 ~ 3000 250 m sec 069 PG P1 Program ming the optional MH-59A8J Q. SPL
5 Clar / IF Shift 13 VFO / Memory pseudo0VOX CW sem i-break-in
operation.
m sec m icrophones [P1] button as signment.
6 FunctionMenu / Hold for 14 LOCK 025 CW KEY REV Sets the keyer paddles wiring
configuration.
NORMAL/REVERS
E
NORMAL 070 PG P2 Program ming the optional MH-59A8J
m icrophones [P2] button assignment.
TCALL
Enables/dis ables CW keying by the Adjusts the audio input level from the TNC
Menu
026 CW PADDLE ELEKEY/MICKEY ELEKEY 071 PKT 1200 0 ~ 100 50
microphones [UP]/[DWN] keys. during 1200 bps Packet operation.
027 CW PITCH Setting of the pitch of the CW 400 ~ 800 Hz 700 Hz 072 PKT 9600 Adjusts the audio input level from the TNC 0 ~ 100 50
7 Menu Keys 15 Main Dial (select sidetone, BFO offset, and CW filter
center frequencies.
during 9600 bps Packet operation.
frequency or menu option) 028 CW QSK Selects the tim e delay between when
the PTT is keyed and the carrier is
10/15/20/25/30
ms
10 ms 073 PKT RATE Sets the transceivers circuitry for the
Packet baud rate to be used.
1200/9600 (bps) 1200 bps
(5cpm/step)
LSB) 031 CW TRAINING Sends random Morse Code five- N, A, AN N 076 RPT SHIFT Sets the magnitude of the repeater shift. 0.00 ~ 99.99 (MHz) 2
character groups via the sidetone.
032 CW WEIGHT Sets the Dot:Dash ratio for the built-in 1:2.5 ~ 1:4.5 01:03.00 077 SCAN MODE Selects the desired Scan-Resume mode. TIME/BUSY/STOP TIME
electronic keyer.
033 DCS CODE Setting of the DCS code. 104 Standard 23 078 SCAN RESUME Sets the delay tim e for scanning 1 ~ 10 (s ec) 5 sec
MFa A/B A=B SPL MFj SPOT BK KEY 037 DIG GAIN
mode operation.
Adjusts the audio input level from 0 ~ 100 50 082 SSB STEP Selects the tuning steps for the SELECT 1kHz/2.5kHz/5kHz 2.5kHz
terminal equipment during DIG knob on the SSB m ode.
MFb MW SKIP TAG MFk TUNE DWN UP 038 DIG MODE
(Digital) m ode operation.
Selects the mode and sideband in the RTTY-L/RTTY- RTTY-L 083 TONE FREQ Setting of the CTCSS Tone Frequency. 50 Standard 88.5 Hz
MFc STO RCL PROC MFl NB AGC AGC SPD DIG (Digital) m ode. U/PSK31-L/RTTY-
L/PSK31-U/USER-
CTCSS tones
039 DIG SHIFT Defines the carrier frequency offset 3000 ~ +3000 Hz 0 Hz 084 TOT TIME Select the Tim e-Out Tim er tim e. OFF/1 ~ 20 (min) OFF
MFe TON/ENC ----/DEC TDCH MFn CFIL FIL-1 FIL-2 during DIG (USER-L or USER-U)
mode operation.
MFf ARTS SRCH PMS MFo PLY1 PLY2 PLY3 040 DIG VOX Sets the gain of the VOX circuitrys
input level for the DIG m ode.
0 ~ 100 0 085 TUNER/ATAS Selects the device (FC-30 or ATAS-100/-
120) to be controlled via the front panels
OFF/ATAS(HF)/AT
AS(HF&50)/ATAS(
OFF
MFh SCOP WID STEP MFq UPRG1 UPRG2 UPRG3 042 DISP CONTRAST Setting of the dis play contrast level.
043 DISP INTENSITY Setting of the dis play brightness level.
1 ~ 13
1 (Dim ) ~ 3
5
3
087 VOX DELAY
088 VOX GAIN
Sets the hang tim e for the VOX circuitry.
Sets the gain of the VOX circuitrys input
100 ~ 3000 (ms)
1 ~ 100
500 m s
50
(Bright) audio detector.
MFi MTR DISP 044 DISP MODE Sets up the LCD Lamp mode. OFF/AUTO1/AUTO AUTO2 089 XVTR A FREQ Allows an arbitrary frequency to be set on 0,000,00 ~
2/ON the dis play, to allow direct frequency 9999,999,00 (kHz)
045 DSP BPF WIDTH Setting of the bandwidth for the DSP 60/120/240 Hz 240 Hz 090 XVTR B FREQ readout during transverter operation.
CW audio filter.
091 XVTR SEL Enables/dis ables/selects the antenna port OFF/X VTR A/X OFF
to be used for Transverter operation. VTR B