Академический Документы
Профессиональный Документы
Культура Документы
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Branch
Branch(config)#no ip domain-lookup
Branch(config)#enable secret class
Branch(config)#banner motd %Holaa!%
Branch(config)#line console 0
Branch(config-line)#password cisco
Branch(config-line)#login
Branch(config-line)#exit
Branch(config)#line vty 0 4
Branch(config-line)#password cisco
Branch(config-line)#login
Branch(config-line)#exit
Branch(config)#end
Branch#
%SYS-5-CONFIG_I: Configured from console by console
Branch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Branch(config)#int f0/0
Branch(config-if)#ip add 10.10.2.1 255.255.254.0
Branch(config-if)#no shut
Branch(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Branch(config-if)#int s0/0
Branch(config-if)#ip add 192.168.1.126 255.255.255.128
Branch(config-if)#clock rate 64000
Branch(config-if)#no shut
Branch#
HQ Router Configuration
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int f0/0
Router(config-if)#ip add 192.168.1.129 255.255.255.192
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router(config-if)#int s1/0
Router(config-if)#ip add 192.168.1.1 255.255.255.128
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface Serial1/0, changed state to up
Router(config-if)#int s1/1
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
Router(config-if)#int s1/1
Router(config-if)#ip add 209.165.200.226 255.255.255.252
Router(config-if)#clock rate 64000
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface Serial1/1, changed state to up
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1, changed state to up
HQ#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
HQ#Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#end
Router#
%SYS-5-CONFIG_I: Configured from console by console
ISP Router Configuration
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname ISP
ISP(config)#no ip domain-lookup
ISP(config)#banner motd %Hola!%
ISP(config)#enable secret class
ISP(config)#line console 0
ISP(config-line)#password cisco
ISP(config-line)#login
ISP(config-line)#exit
ISP(config)#line vty 0 4
ISP(config-line)#password cisco
ISP(config-line)#login
ISP(config-line)#exit
ISP(config)#
ISP(config)#end
ISP#
%SYS-5-CONFIG_I: Configured from console by console
ISP#config t
Enter configuration commands, one per line. End with CNTL/Z.
ISP(config)#int f0/0
ISP(config-if)#ip add 209.165.202.129 255.255.255.224
ISP(config-if)#no shut
ISP(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
ISP(config-if)#int s0/0
ISP(config-if)#209.165.200.225 255.255.255.252
^
% Invalid input detected at '^' marker.
ISP(config-if)#ip add 209.165.200.225 255.255.255.252
ISP(config-if)#no shut
ISP(config-if)#
%LINK-5-CHANGED: Interface Serial0/0, changed state to up
ISP(config-if)#i
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
ISP(config-if)#ip route 192.168.1.0 255.255.255.0 s1/1
%Invalid interface type and number
ISP(config)#ip route 192.168.1.0 255.255.255.0 209.165.200.226
ISP(config)#ip route 10.10.2.0 255.255.254.0 209.165.200.226
ISP(config)#no shut
^
% Invalid input detected at '^' marker.
ISP(config)#
ISP(config)#end
ISP#
%SYS-5-CONFIG_I: Configured from console by console
ISP#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
ISP#