Академический Документы
Профессиональный Документы
Культура Документы
CERTIFICATE NO.:
Qualification in accordance with ASME IX Code 2015 and ABS rules 2015 SOFELQCVLG002-1
ABS REPORT NO.:
Welding Specification
GTAW+SMAW-SA928-6G-30.16mm Rev 00
No.
RECORD ACTUAL VALUES USED IN
WELDING VARIABLES QUALIFICATION RANGE
QUALIFICATION
Process / Type GTAW+SMAW GTAW+SMAW
Electrode (Single or
Single Single
Multiple)
Current/Polarity GTAW: DCEN SMAW: DCEP GTAW: DCEN SMAW: DCEP
Position 6G All
Weld Progression Uphill Uphill
Backing (YES or NO) No Yes/No
Material/Spec. SA-790/ S31803 P-No.1 through P-No.15F, P-No.34,
Base Metal P-No.10H to P-No.10H and P-No.41 through P-No.49
Thickness (Pipe/Plate) GTAW: 6.5mm SMAW: 13.8mm GTAW: 13mm SMAW: Unlimited
Other - -
TESTING
TYPE OF TEST RESULT REPORT
Visual Inspection Accepted SOFEL-QC-WD-065
Radiographic test Accepted Z2020-WQT-CA/16-RT-010
Tensile Test N/A N/A
Guided Bend Test N/A N/A
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded,
and tested in conformance with the requirements of ASME IX 2015 and ABS rules 2015.
WQT FORM
used for ABS project only
Prepared by: Nguyen Nhat Phong Approved/Reviewed by:
Position: M&P QC Engineer Position: ABS Surveyor
Date: Date:
Information regarding job knowledge, certificate issued on the basis of previous approval, etc.
Prolongation of approval by employer
Place: Date: Position/title: Signature:
Stamp (name / title )
Date Place..
Stamp (name / title )
WQT FORM
used for ABS project only
Date Place..
Stamp (name / title )
WQT FORM
used for ABS project only