Академический Документы
Профессиональный Документы
Культура Документы
RoHS Compliant
Terminology
z DVI z bps
Abbreviation for Digital Visual Interface. Abbreviation of Bits Per Second.
One of the specifications for connecting a PC and display. Unit of data speed expressing the number of bits that can
Using the DVI, you can directly send digital signals from a be transmitted in one second.
PC to the display. 1 bps means 1 bit of data can be transmitted per second.
z TMDS z EMI
Abbreviation for Transition Minimized Differential Signaling. Abbreviation of ElectroMagnetic Interference (noise).
A digital transmission method of the display video signal
used for the DVI.
z RGB
Three video signals of R (Red), G (Green) and B (Blue).
Ordering Information
Type Digital Digital/Analog
Accessories No anchors Inch screws, No anchors Inch screws,
length = 5.8 mm length = 5.8 mm
Model XM4M-2432-5012 XM4M-2432-1312 XM4M-2932-5012 XM4M-2932-1312
Appearance
1
Dimensions (unit: mm)
XM4M-2432-1312
Mounting holes (t = 1.6 mm, bottom view)
30.73 0.1
19.05 0.1
Four, 1.93 +0.1
0
dia. 5.84 0.05
18.2 Board terminals
13.335 3.3
19.05 1.905 9.14 0.05
30.73
2.54 0.05 Two, R2.54 0.1
XM4M-2932-1312
Mounting holes (t = 1.6 mm, bottom view)
30.73 0.1
Six, 0.66 +0.1 dia. 19.05 0.1
0
5.84 0.05 2.67 0.05
Board
18.2 0 dia.
Four, 1.93 +0.1 terminals 3.94 0.05
2.54 0.05
5.8 6.5 3.3 0.05
5.08 0.05
24.03
1.93 0.05 1.27 0.05
Pin 1 2.54 0.05
#4-40 UNC 1.905 0.05
36.78 24, 0.86 +0.1
0
dia.
32.51 1.27 1.905 0.05
13.335 2.54 1.905 0.05
1.27 2.54
1.905 1.905 13.335 0.1
9.9 7.72
4.95
Panel dimensions (For XM4M-2932-501@) (t = 1.2 mm max.)
2.03 2.5
1.905 32.51 0.05 Two, R0.64 0.1
1.27 2.73 27.43 0.05
1.905 2.7
2.54 2.66 Two, 3.05 +0.1
0
dia.
13.335 3.3
19.05 3.94 2.54
30.73 9.14 0.05
5.08
1.905
2.54 0.05 Two, R2.54 0.1
Terminal layout
Digital/Analog sharing type terminal Arrangement
Terminal layout viewed from the mating surface Board terminal arrangement (BOTTOM VIEW)
Terminal 9 Terminal 16 Board edge
Terminal 1 Terminal 8 C1 C2 Terminal 17 Terminal 16 C3 C5
Terminal 24
1 8 C1 C2 C4
C3 C4
24 C5
Terminal 9
C1 C2
Terminal 1 Terminal 8
C5
Terminal 17 Terminal 24 C3 C5 C4
Precautions
Precautions for Correct Use
Automated Soldering About panel mount
Soldering Use anchor 3 (XM4Z-002@ series) to lock connectors without
anchors. (For anchor 3, refer to XM3-L/XM-2L/XM4K/XM4L.)
Automated Soldering Conditions (Jet Flow)
1. Soldering temperature: 250 5C Mating
2. Continuous soldering time: Within 51 s
Do not connect the Connectors in the wrong direction, otherwise it
Tightening torque for anchors may be damaged.
To install an anchor on the connector body, tighten it with 0.49 Nm.
Also, use a proper size tool to do this work.
OMRON Corporation
Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. G061-E1-02
1014(0412)(O)