Академический Документы
Профессиональный Документы
Культура Документы
ELECTRO-LUBE
The most powerful self-contained, single point luber available!
More Power
Up to 800 PSI lets you lubricate up to
12 bearings using a distribution block.
More Value
Refillable features saves time and
money, while reducing down time.
More Versatility
Runs off internal battery pack or
optional external power sources.
More Adaptability
Can be used in single or multi-point
configurations.
Single-point
Up to
800 PSI
Multi-point
Representante en Per:
Motor
Replaceable battery pack
Precise metered lubrication Translucent reservoir
allows for visual indication
Low pressure spring-loaded of lubricant level
piston feeds the pump.
Units can be mounted in any
For year round operation position
factory recommends multi- Remote mounting three feet or less:
grade lubricant, EP1 or EPO 1/4 I.D. minimum
as well. Up to 20 feet, 3/8 I.D. minimum
COMPARISON CHART
This chart compares the lubricant output rate of the Electro-Luber MD with several common manual lubrica-
tion schedules. The Electro-Luber MD switch settings indicated will provide comparable lubrication to that of
the manual practice shown. Do not over-lubricate bearing. Please visit website for more information.
Manual Lubrication MD Model 125 Setting MD Model 250 Setting MD Model 500 Setting
Schedule
Unit Life Switch Setting Unit Life Switch Setting Unit Life Switch Setting
1 2 3 4 5 6 7 2 months 1 2 3 4 5 6 7 4 months 1 2 3 4 5 6 7
Daily lubrication 3 - 4 strokes1 month
(30 days) (60 days) (120 days)