Академический Документы
Профессиональный Документы
Культура Документы
@6866588D38@
GCD-EMEA, Issued: 01.2009
ii CM5000 Mobile Terminal / Basic Service Manual COPYRIGHT
COPYRIGHT
Copyrights
The Motorola products described in this manual may include copyrighted Motorola com-
puter programs stored in semiconductor memories or other media. Laws in the United
States and other countries preserve for Motorola certain exclusive rights for copyrighted
computer programs including, but not limited to, the exclusive right to copy or reproduce in
any form the copyrighted computer program. Accordingly, any copyrighted Motorola com-
puter programs contained in the Motorola products described in this manual may not be
copied, reproduced, modified, reverse-engineered, or distributed in any manner without the
express written permission of Motorola. Furthermore, the purchase of Motorola products
shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any
license under the copyrights, patents or patent applications of Motorola, except for the nor-
mal non-exclusive royalty-free license to use that arises by operation of law in the sale of a
product.
Trademarks
Motorola, the Motorola Logo and all other trademarks identified as such herein are trade-
marks of Motorola Inc. All other product or service names are the property of their respec-
tive owners.
CONTENTS CM5000 Mobile Terminal / Detailed Service Manual iii
CONTENTS
COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II
Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Computer Software Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . III
CHAPTER 1
SCOPE & WARRANTY INFORMATION .................................... 1
Scope of this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Manuals & User Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
iv CM5000 Mobile Terminal / Basic Service Manual CONTENTS
CHAPTER 2
MODEL INFORMATION .................................................5
CM5000 Model Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Feature Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CHAPTER 3
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Digital Control Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Radio Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Key and display Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CHAPTER 4
TEST SETUP & ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Typical Test Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Self Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
IFR 2968 - Channel and Mode Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
RX VCO frequency adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Confirming receiver sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Transmit Power Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Receiver Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
CHAPTER 5
CONNECTOR PIN FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Microphone Connector (Panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Accessory Connector 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Accessory Connector 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Antenna Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
GPS Antenna Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Power Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
CHAPTER 6
PARTS LISTS AND DRAWINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Replacement Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Accessories Replacement Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
APPENDIX A
REPLACEMENT PARTS & KITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Servicing CM5000 Mobile Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Europe, Middle East and Africa Region . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Asia, Pacific Region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Latin America Region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
DOCUMENT HISTORY CM5000 Mobile Repeater/Gateway - Basic Service Manual v
DOCUMENT HISTORY
The following major changes have been implemented in this manual since the previous edition:
This 2-way terminal uses electromagnetic energy in the radio frequency (RF) spectrum to provide
communications between two or more users over a distance. It uses radio frequency (RF) energy or
radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other
forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be
confused with these other forms of electromagnetic energy, which when used improperly, can cause
biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material.
Experts in science, engineering, medicine, health and industry work with organisations to develop
standards for safe exposure to RF energy. These standards provide recommended levels of RF
exposure for both workers and the general public. These recommended RF exposure levels include
substantial margins of protection.
All Motorola 2-way terminals are designed, manufactured and tested to ensure they meet
government-established RF exposure levels. In addition, manufacturers also recommend specific
operating instructions to users of 2-way terminals. These instructions are important because they
inform users about RF energy exposure and provide simple procedures on how to control it.
Please refer to the following Web sites for more information on what RF energy exposure is and how
to control your exposure to assure compliance with established RF exposure limits.
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
viii CM5000 Mobile Repeater/Gateway - Basic Service Manual Product Safety and RF Exposure
The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for mobile
2-way terminals before they can be marketed in the U.S. When 2-way terminals are used as a
consequence of employment, the FCC requires users to be fully aware of and able to control their
exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a
label directing users to specific user awareness information. Your Motorola 2-way terminal has an
RF exposure product label. Do not remove this RF exposure label from the device. Also, your
Motorola user manual, or separate safety booklet, includes information and operating instructions
required to control your RF exposure and to satisfy compliance requirements.
Your Motorola terminal is designed and tested to comply with a number of national and international
standards and guidelines (listed below) regarding human exposure to radio frequency
electromagnetic energy. This terminal complies with IEEE and ICNIRP exposure limits for
occupational/controlled RF exposure environments at duty factors of up to 50% talk50% listen
and is authorised by the IEEE/ICNIRP for occupational use. In terms of measuring RF energy for
compliance with these exposure guidelines, your terminal antenna radiates measurable RF energy
only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode.
United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part
2 sub-part J
American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers
(IEEE) C95. 1-1992
ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) additional requirements
for SMR, cellular and PCS product certification.
Product Safety and RF Exposure CM5000 Mobile Repeater/Gateway - Basic Service Manual ix
To control exposure to yourself and others and to ensure compliance with the RF exposure limits,
always adhere to the following procedures.
Guidelines:
User awareness instructions should accompany device when transferred to other users.
Do not use this device if the operational requirements described herein are not met.
Instructions:
Transmit no more that the rated duty factor of 50% of the time. To transmit (talk), push the
Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the
time, or less, is important because this terminal generates measurable RF energy exposure only
when transmitting (in terms of measuring for standards compliance).
Transmit only when people outside the vehicle are at least the recommended minimum
lateral distance away, as shown in Table 1, from the body of a vehicle with a properly
installed antenna. This separation distance will ensure that there is sufficient distance from a
properly installed (according to installation instructions) externally-mounted antenna to satisfy
the RF exposure requirements in the standards listed above.
If you are not sure of the rated power of your terminal, contact
your Motorola representative or dealer and supply the terminal
model number found on the terminal model label. If you cannot
determine the rated power out, then assure 90cms (3 feet)
separation from the body of the vehicle.
x CM5000 Mobile Repeater/Gateway - Basic Service Manual Product Safety and RF Exposure
These mobile antenna installation guidelines are limited to metal body motor vehicles or vehicles
with appropriate ground planes.
Antennas should be installed in the centre area of the roof or the trunk lid taking into account the
bystander exposure conditions of backseat passengers and according to the specific instructions
and restrictions in the Radio (Terminal) Installation Manual along with the requirements of the
antenna supplier.
Trunk lid installations are limited to vehicles with clearly defined flat trunk lids, and in some
cases, to specific terminal models and antennas. See the Radio (Terminal) Installation Manual
for specific information on how and where to install specific types of approved antennas to
facilitate recommended operating distances to all potentially exposed persons.
Approved Accessories
This terminal has been tested and meets the RF Safety Standards when used with the Motorola
accessories supplied or designated for this product. Use of other accessories may result in non-
compliance with RF Safety Standards.
For a list of Motorola approved antennas, please see your dealer or local Motorola contact. Your
nearest dealer can be found at the following web site:
http://www.motorola.com/businessandgovernment/wemea/en-gb/public/functions/dealerlocator/
dealerlocator.aspx
Additional Information
http://www.motorola.com/rfhealth
If mobile terminal equipment is installed at a fixed location and operated as a control station or as a
fixed unit, the antenna installation must comply with the following requirements in order to ensure
optimal performance and compliance with the RF energy exposure limits in the standards and
guidelines listed on previous page:
The antenna should be mounted outside the building on the roof or a tower if at all possible.
Product Safety and RF Exposure CM5000 Mobile Repeater/Gateway - Basic Service Manual xi
As with all fixed site antenna installations, it is the responsibility of the licensee to manage the
site in accordance with applicable regulatory requirements and may require additional
compliance actions such as site survey measurements, signage, and site access restrictions in
order to insure that exposure limits are not exceeded.
Electromagnetic Interference/Compatibility
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off your terminal in any
facility where posted notices instruct you to do so. Hospitals or health care facilities may be using
equipment that is sensitive to external RF energy.
Vehicles
To avoid possible interaction between the terminal transmitter and any vehicle electronic control
modules, such as, ABS, engine, or transmission controls, the terminal should be installed only by an
experienced installer and that the following precautions be used when installing the terminal:
2. Before installing the terminal, determine the location of the electronic control modules and their
harnesses in the vehicle.
3. Route all terminal wiring, including the antenna transmission line, as far away as possible from
the electronic control units and associated wiring.
Driver Safety
Check the laws and regulations on the use of terminals in the area where you drive. Always obey
them. When using your terminal while driving, please:
Pull off the road and park before making or answering a call if driving conditions so require.
xii CM5000 Mobile Repeater/Gateway - Basic Service Manual Product Safety and RF Exposure
OPERATIONAL WARNINGS
Do not mount or place a mobile terminal in the area over an air bag or in the air bag deployment
area. Air bags inflate with great force. If a terminal is placed in the air bag deployment area and
the air bag inflates, the terminal may be propelled with great force and cause serious injury to
occupants of the vehicle.
Turn off your terminal prior to entering any area with a potentially explosive atmosphere. Sparks
in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or
even death.
The areas with potentially explosive atmospheres referred to above include fuelling areas such
as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air
contains chemicals or particles, such as grain, dust or metal powders. Areas with potentially
explosive atmospheres are often but not always posted.
To avoid possible interference with blasting operations, turn off your terminal when you are near
electrical blasting caps, in a blasting area, or in areas posted:
"Turn off two-way radio (terminal)". Obey all signs and instructions.
For terminals installed in vehicles fueled by liquefied petroleum gas, refer to the (U.S.) National
Fire Protection Association standard, NFPA 58, for storage, handling, and/or container informa-
tion. For a copy of the LP-gas standard, NFPA 58, contact the National Fire Protection Associa-
tion, One Battery Park, Quincy, MA.
Product Safety and RF Exposure CM5000 Mobile Repeater/Gateway - Basic Service Manual xiii
Only specialized workshops should be contacted for installation, maintenance and repair work.
This unit is equipped with protection fuses in the Power and Ignition Sense Cable.
Replace these fuses only with the original ratings!
Fuse for Power Cable GKN6270/GKN6274: 10A (Motorola Part Number: 65C80283E05)
Fuse for Ignition Sense Cable HKN9327: 4A (Motorola Part Number: 65C80283E02)
xiv CM5000 Mobile Repeater/Gateway - Basic Service Manual Product Safety and RF Exposure
CHAPTER 1
SCOPE & WARRANTY INFORMATION
This manual is intended for use by trained service technicians familiar with similar types of equip-
ment only. It contains information required for the installation of the equipment described and is cur-
rent as of the printing date. Changes which occur after the printing date may be incorporated by a
complete Manual revision or alternatively as additions.
Copyright
Document History
CHAPTER 3 Overview
Service Manual
User Guides
6866539D60 CM5000 Basic User Guide (English, German, French, Spanish, Lithuanian)
6866539D64 CM5000 Basic User Guide (English, Swedish, Polish, Dutch, Norwegian)
Installation Manual
Programmers Guide
Warranty
Motorola offers long term support for its products. This support includes full exchange and/or repair
of the product during the warranty period, and service/ repair or spare parts support out of warranty.
Warranty Period and Return Instructions
The terms and conditions of warranty are defined fully in the Motorola Dealer or Distributor or Resel-
ler contract. These conditions may change from time to time and the following notes are for guid-
ance purposes only. In instances where the product is covered under a "return for replacement" or
"return for repair" warranty, a check of the product should be performed prior to shipping the unit
back to Motorola. This is to ensure that the product has been correctly programmed or has not been
subjected to damage outside the terms of the warranty.
Prior to shipping any terminal back to the appropriate Motorola warranty depot, please contact Cus-
tomer Resources or your Motorola dealer, distributor or reseller. All returns must be accompanied by
a Warranty Claim Form, available from your Customer Service representative or Motorola Online
Extranet (MOL) or your Motorola dealer, distributor or reseller (refer to list in Appendix A). Products
should be shipped back in the original packaging, or correctly packaged to ensure no damage
occurs in transit.
SCOPE & WARRANTY INFORMATION CM5000 Mobile Repeater/Gateway - Basic Service Manual 3
After the Warranty period, Motorola continues to support its products in two ways.
Motorola's Regional Radio Support Centres offer a repair service to both end users and deal-
ers at competitive prices.
AAD supplies parts support for the Control Head only. The parts can be purchased by dealers
who are technically capable of performing fault analysis and repair. The repairs that require
spare parts not listed must be shipped to Motorola for repair.
Only Motorola Service Centers or Approved Motorola Service
Dealers can perform these functions. Any tampering by non-
authorised Motorola Service Centers voids the warranty of
your radio.
To find out more about Motorola and its approved Centers,
please visit: http://www.motorola.com/governmentandenter-
prise
4 CM5000 Mobile Repeater/Gateway - Basic Service Manual
CHAPTER 2
MODEL INFORMATION
The CM5000 is an advanced TETRA mobile radio terminal which has been designed using the lat-
est digital radio communication and micro-computer technology.
The operating protocol and facilities are based on ETS TETRA standards.
Features
- Status Messages
- Emergency Call
- Multi-Site Roaming
Technical Specifications
GENERAL RECEIVER TRANSMITTER
ETSi: ETS 300 394-1 Receiver Type: Superheterodyne Modulation Type: /4DQPSK
Type Number: Frequency Range: RF Power:
Temperature Range for Transceiver: Channel Spacing: 25 kHz Frequency Range TMO:
Operating -20C to +60C 380-430 MHz
Storage: -40C to +80C Sensitivity (3.5%) BER: -112 dBm
Radio Unit only 1450 Audio Rated Adjacent Channel Power (@ 25 kHz):
Control Head only 250 (@4 Ohms): 10 W
Radio Unit plus CH 1700 For External Speaker: 5% Max. 380-430 MHz 60 dBc
Distortion at Rated Audio:
Feature Specification
Title Specifications
Talk Groups - TMO 2048
Shock, Drop & Vibration ETS 300 019-1-5 class 5M2 and class 5M3
CHAPTER 3
OVERVIEW
General
CM5000 TETRA Radio Terminal consists of two PC boards. One is in the Main Unit and the other is
in the Key & Display Unit.
The Main Unit consists of Digital Control Circuit unit and the Radio Circuit.
The Digital Control Circuit controls the whole radio equipment accordance with key operation of the
Key/Display Unit or received signal from TRBS (TETRA Network Radio Base Station) which are fed
from the radio circuit or external data from PEI (Peripheral Equipment Interface Circuit).
System Controller
Digital Signal Processing
External Interface Circuit
10
TO POTENTION
UCM Serial inf (4) UCM Serial inf (4) METER
EEPROM
9V 3/3.3 WP 64K bit
UCM_RESET SIM_RESET SIM Card Control
10BU UCM 40pin SIM
SIM I/F IC
Connector UCM_WAKEUP 3.578MH Card
KEY_FAIL/FLASH
UCM_DETECT FLASH ROM SDRAM
32M (2M* 16) bit 64M (4M*16) bit 3.3BU3.3VA
SIM connector 6pin
SRAM GPS_PWR_SW
PLL Controls (CLK,DATA, STB0,1,2 PLL 1UNLOCK,PLL2_UNLOCK,PLL 3_UNLOCK 1M (128K*8) bit
Battery
Transceiver Control, Cartesian loop Control Asynchronous Serial (RX)
GPS ANT
Asynchronous GPS8
ADC10PSEL 3.3BU
10 bits bus Serial (TX) sw 3.3VG
RX2ndIFOUT A/D 5V 9V
clk(15.36M) POWSW POWSW Control head
(10bit)
PTT 1 connector
HOOK 1 20 pin
EMG1 EMG 1
FB_IQ A/D 3 wire serial bus Synchronous Serial 0
(12bit) Synchronous Serial 1
REC.B
I_mod CPU MIC1
I 3 wire serial
2ch D/A bus(Clock15.36) DGND
Q_mod Q CAR HORN
(12bit) AGND
IDC
EMG2
QDC SWA+
AT_LTAT_FB 3 wire serial bus I.S
Figure 1.
CTS1,RTS1,DSR1,DTR1 3.3v/12V
SWA+ (BATT) CPU
S A/D 3 wire serial bus
MIC_ON
PA_REV (TEMP) W (8bit) EMIC_ON
EAUDIO_ON SWA+
Power Connector 2pin
ALT _REC_ON
X'TAL Master Clock ALT _SP_ON
13MHz 15.36MHz 5V
PLL Generation 3.3BU
part GPS_PWR_SW Back up
SP_MUTE Power 10BU
Power Supply
13M(subclk )
Supply Circuit
3.3V 3.3VG
Circuit
SWA+ 2.5V 9V
3V
AFE_IC 1.8V
OVERVIEW
OVERVIEW CM5000 Mobile Repeater/Gateway - Basic Service Manual 11
System Controller
System Controller consists of System On Chip (SOC), ROM / RAMs, and supply voltage regulator.
The SOC (IC 601) contains Microprocessor (CPU), DSP (Digital Signal Processor) and peripheral
circuit. It is constantly working when the radio unit is turned on. It is sampling the signal cause from
switch operation of the radio and the received control signal from a TRBS which is processed by dig-
ital signal processor circuit.
Once any of these signal lines have been changed the microprocessor knows what to do and then
sends out the control signal to the necessary circuit.
The system program for the Main unit is installed in the Flash-ROM (IC602).
The microprocessor in the SOC copies the program from Flash-ROM to the SDRAM (IC603) when
the radio is powered up. The microprocessor reads the program from SDRAM, and executes the
instructions accordingly.
The radio parameter of the equipment is installed in the free area of the Flash-ROM (IC602).
The temporary data of the equipment is stored in the SDRAM (IC603) and SRAM (IC604). The radio
parameters (e.g. output power adjustment, receiver adjustment) are stored in the EEPROM (IC605).
Channel CODEC DSP, Voice CODEC DSP and signal processing hardware in the SOC (Sys-
tem On Chip)
ADC, DAC and Linear CODEC in the AFE (Analog Front End).
Peripheral 10 bit ADC and 12 bit DAC
Received analog signal that is converted to the IF frequency was converted to the digital signal by
the 10 bit ADC and fed to the SOC.
The digital signal is quadrature detected and filtered, then converted to the I/Q signal.
The channel CODEC recover the I/Q signal to the original signal stream by delay detection, and per-
form Channel Decoding.
Then the decoded signal is fed to Voice CODEC in case of voice signal or fed to CPU in case of con-
trol signal or message data.
The voice CODEC DSP sends the coded voice data to the Channel CODEC. The CPU sends the
control and message data to the Channel CODEC.
The channel CODEC DSP perform channel encoding and framing the provided signal, then convert
to the I/Q signal.
The I/Q signal is filtered (roll off alpha = 0.35) by the signal processing hardware in the SOC. Then
converted to the analog signal as I/Q signal by the 12 bit DAC.
12 CM5000 Mobile Repeater/Gateway - Basic Service Manual OVERVIEW
Transmit analog voice data is converted to the digital signal by the linear CODEC and fed to the
Voice CODEC DSP.
The Voice CODEC DSP compresses the input digital signal by ACELP algorithm to the coded voice
data. And the data is fed to the Channel CODEC DSP.
Received digital voice data is fed to the voice CODEC DSP from Channel CODEC DSP as coded
voice data.
The Voice CODEC DSP expands the coded voice data and fed to the linear CODEC. The digital sig-
nal is converted to the analog signal by the linear CODEC and output as analog signal.
Frequency Compensation
The Channel CODEC DSP calculates frequency error between the radio and base station (Master
station in DMO). It controls the VC-TCXO by DAC so as to minimize the frequency error. The VC-
TCXO works as time base reference of the radio.
The Channel CODEC DSP controls the output power by the DAC based on the receive signal
strength and broadcast information from the base station.
Also the DSP calculates so as to minimize the distortion of the transmitter and carrier leak and con-
trols the Cartesian Loop by DAC.
VC-TCXO
The reference signal for the PLL synthesizer is generated by VC-TCXO. The oscillation frequency of
the 13 MHz reference signal is fine controlled by Channel CODEC DSP. The frequency error
between the Radio Terminal and TRBS is detected and error correction signal is generated by DPS.
And the error correction signal is fed to Voltage Control circuit of the TCXO to make fine frequency
tuning.
Interface Unit
The Main unit has analog interface circuit and digital interface circuit for external interface.
Digital Interface
Digital interface is connected to the connector J902 and J904 at the rear of the Main unit. Those
connectors are combined in the one connector, but electrically independent. One is RS232 level
interface, and the other is 0 V / 3 V interface level.
The RS232 level serial communication is connected to the 7 pins connector (J904) at the rear of the
Main unit. This connector is used for the programming of the radio parameter, AT command control,
data output for the log etc.
The usage is dependant on the setting in Native Programmer, which is described in Pro-
gramming Manual (part number 6866539D46).
0 V / 3 V level serial communication is connected to the 20 pins connector (J902). This connector is
used for same purpose. Features of those connectors are configured by programming. When con-
necting the external equipment with the 20 pins connector (J902), appropriate level converter is
required.
OVERVIEW CM5000 Mobile Repeater/Gateway - Basic Service Manual 13
The usage is dependant on the setting in Native Programmer, which is described in Pro-
gramming Manual (part number 6866539D46).
Analog Interface
For the external interface other than serial communication, J902 has analog interface as follows:
Panel Interface
Communication with the Key & Display unit such as Key operation signal, LCD control interface,
LCD/Key backlight control, and 2 color indicator LED control interface is performed via connector
J901 by serial communication. The signaling level is 0 V / 3.3 V and baud rate is 115.2 kbps. Other
than control signal, audio output signal for the handset, audio signal from microphone and Hook sig-
nal are connect with Key/Display unit via J901.
Audio Circuit
Audio circuit includes receive audio, transmit audio circuit.
Receive audio circuit has speaker amplifier and handset audio circuit.
Receive Speaker
Received signal that is converted to the analog signal at Linear CODEC in the AFE is volume con-
trolled by the linear CODEC and amplified by the OP amplifier (IC802)
Speaker amplifier (IC805) is BTL type amplifier. It amplifies audio signal. Speaker output signal is
connected to the external speaker via interface connector J902.
Operational tone signal is generated by the SOC and amplified by the OP amplifier (IC802). Then
the tone volume is adjusted by the potentiometer (IC803) and OP amplifier (IC802) and mixed with
receive signal by the OP amplifier (IC802).
Handset Circuit
Fixed level received audio signal is outputted by the AFE and amplified by the OP amplifier (IC801).
Variable volume control received audio signal is mixed at OP amplifier (IC801) via audio switch
(IC806). Operation tone is mixed in (IC801) via audio switch (IC804). SOC controls selection of
these signals.
14 CM5000 Mobile Repeater/Gateway - Basic Service Manual OVERVIEW
These signals are connected to the Microphone connector on the Key/Display unit and the interface
connector (J902) at the rear of the main units.
TX audio, Ext. Mic of the external analog interface and Microphone signal of the Key/Display unit is
selected by the audio switch (IC806). SOC selects those signals. The selected signal is adjusted the
level by (IC802) and fed to the Linear CODEC in the AFE.
Not switched pass is connected to the voltage regulators (IC851 and IC852). The voltage regulators
supply DC power for the backup memory.
Switched pass is connected to the FET switch (TR851). This FET is controlled ON/OFF by the con-
trol signal that activated by the encoder on the Key/display unit or external device. ON/OFF control
signal is fed to the Gate of the FET via transistor (TR852 to TR855). The switched power is named
as SWA+. This power is connected to the followed voltage regulators.
IC853 and peripheral circuit consists of DC/DC converter and generate 3.3 V. This power is used for
the digital circuit such as SOC. And this power is connected to the followed voltage regulators to
generate lower voltage.
IC854 generates 1.8 V (1.8 VC), IC855 generates 2.5 V (2.5 VID) and IC856 generates 2.5 V
(2.5 VIA). Those regulators are designed to turn on in the order of 2.5 VIA, 2.5 VID and 1.8 VC.
IC857 generates 1.8 V (1.8 VI).
SIM Interface
The GSM type SIM card is used. SIM card is inserted to the SIM card connector (J801).
GPS
GPS receiver (IC611) is used for receiving the GPS signal. External GPS antenna is connected to
the GPS antenna connector at the rear of the main unit. The GPS signal from the GPS antenna is
connected to the GPS receiver via the RF connector (J605).
The GPS receiver is connected via the serial interface IC (IC612) to the SOC. Received GPS signal
from the receiver or control signal from SOC is communicated by the serial communication.
DC power supply for the GPS antenna is feed through the J605.
RTC
The RTC (Real Time Clock) is controlled by the SOC via IIC bus. Also the RTC signal is outputted to
the SOC via IIC bus.
OVERVIEW CM5000 Mobile Repeater/Gateway - Basic Service Manual 15
UCM
The main unit has UCM connector (J903). This is serial interface to the SOC.
Radio Circuit
Radio circuit contains Receiver RF amplifier and mixer, first IF stage, 2nd if stage, Phase lock loop
(PLL) frequency synthesizer, Transmitter I/Q modulator and buffer, Power Amplifier, linearizer and
Output power control circuit and power supply circuit.
16
RAMPUD
TEMP
Q_MOD Temp
Q-
MOD
I_MOD
CONT_FD
LIN_ON
AT-LT
Figure 2.
DT_COM
CLK_COM PLL1
Rx 1st. Local 1 = 306.10 - 356.10MHz
Tx 1st. Local 1 = 306.55 - 356.55MHz
STB_PLL2 PLL
PLL2_UNLOCK CNT
VCO2_ON REF2
CM5000 Mobile Repeater/Gateway - Basic Service Manual
PLL2
Rx 1st. Local 2 = 306.10 - 356.10MHz
Tx 1st. Local 2 = 306.55 - 356.55MHz
Radio Circuit Block Diagram
STB_PLL3 PLL
the Low Pass Filter (FL201) and antenna switch (CD204 and IC204).
PLL3_UNLOCK CNT
13.0
Rx_ATT_ON
BPF_SHIFT
ANT_SW
ALT_REF1_ON
Received signal that is connected to the antenna connector (J201) is fed to the receiver circuit via
OVERVIEW
OVERVIEW CM5000 Mobile Repeater/Gateway - Basic Service Manual 17
Received signal from antenna switch is fed to the double tuned band pass filter and unwanted signal
is rejected at the filter. This filter is voltage controlled tunable filter.
The control voltage is fed to the filter via the buffer amplifier (IC471).
Output signal from the filter is amplified by the RF amplifier (TR401) and fed to the attenuator circuit
(IC402 ad IC403). This attenuator is used to expand the dynamic range of the receiver and it is
switched according to received signal strength. Attenuator control signal is fed to the attenuator via
the transistor (TR470) and IC (IC472).
Output signal from the attenuator is filtered by the 2nd double tune band pass filter and fed to the 1st
mixer (TR402). This band pass filter is also tuned by the control voltage.
The 1st mixer is N-channel dual gate MOS FET. The received signal is fed to the Gate 1 and the
local signal is fed to the Gate 2 of the FET.
The received signal is converted to the 1st IF signal. The converted 1st IF signal is 73.9 MHz and it
is fed to the 1st IF circuit.
Receive
BPF BPF BPF BPF BPF 2nd Mixer
signal
Buffer
Amp
First IF stage
The 1st IF stage consists of the crystal filter (FL470). The output signal from the 1st mixer id fed to
the input of the crystal filter (FL470), and unwanted signal is filtered. The output signal of the filter is
fed to the 2nd IF stage.
Receive RF
amplifier 1st IF stage 2nd IF stage
and Mixer
Second IF stage
The second IF stage consists of IF IC (IC470) and Ceramic filter (FL471). The IF IC consists of 2nd
Mixer and AGC amplifier.
Received signal from the 1st IF filter and 2nd local signal from the PLL are fed to the input terminal
of the 2nd mixer in the IF IC. Then 1st IF signal is converted to the 450 kHz 2nd IF signal. The signal
from the 2nd Mixer is connected to the AGC amplifier in the IF IC through 450 kHz ceramic filter.
Amplified signal at the AGC amplifier is fed to the ADC in the control circuit.
The AGC amplifier is controlled by the AGC voltage to maintain constant output voltage so as to
maintain appropriate ADC input voltage.
Control circuit determines the gain of AGC amplifier, and it generates the DC voltage by DAC and
fed to the AGC amplifier via the buffer amplifier (IC471).
Ceramic
Filter
1st IF stage
2nd Local AGC control
Signal signal
The 1st Local PLL is consists of the PLL IC (IC501), Loop filter, VCO (HC501) and peripheral circuit.
To realise the TETRA TDMA burst signaling at high speed, fractional N counter type synthesizer is
used.
The 1st local signal is fed to the 1st mixer (TR402) in the receiver circuit and transmit mixer
(CD1002).
The 2nd local PLL consists of the PLL IC (IC1001), Loop filter, VCO (TR1001), buffer transistor
(TR1003 and TR1004) and peripheral circuit.
Output signal of the VCO (TR1001) is amplified by the amplifier (TR1003 and TR1004). This signal
is divided into 2, one is feed back to the PLL IC. The other signal is fed to the receive mixer and the
transmit mixer through the buffer amplifier (TR1004).
Output signal of the 2nd PLL is fed to the 2nd mixer in the IF IC (IC470) and transmit mixer
(CD1002).
OVERVIEW CM5000 Mobile Repeater/Gateway - Basic Service Manual 19
The 1st local signal is amplified by the buffer amplifier (IC507 and TR1005) and fed to the transmit
mixer (CD1002).
The transmit mixer (CD1002) mixes the 1st local signal and 2nd local signal to generate the transmit
signal. High linearity double balanced mixer is used.
Mixed signal is fed to the 2 stages of the band pass filter and buffer amplifier.
The output of the mixer is filtered by the 1st band pass filter. Center frequency of the filter is control-
led by the tuning voltage from the control circuit. The control voltage is generated by the DAC
(IC701) and fed to the filter via buffer amplifier (IC1002).
The output of the band pass filter is amplified by the buffer amplifier (IC2001) and fed to the 2nd
band pass filter. The 2nd band pass filter is also tunable filter same as 1st filter.
The output signal of the 2nd band pass filter is divided into 2, and fed to the quadrature modulator
and quadrature demodulator in the Cartesian Loop through the buffer amplifier (IC510 and IC511).
To RX 1st Mix.
PLL
CNT
REF1
To Q- Mod.
PLL1
Rx 1st. Local = 306.10 - 356.10MHz
Tx 1st. Local = 306.55 - 356.55MHz
PLL
To Q- Dem.
CNT
REF2
PLL2
Rx 1st. Local = 306.10 - 356.10MHz
Tx 1st. Local = 306.55 - 356.55MHz
PLL
CNT
13.0
MHz
PLL3
Rx 2nd. Local = 73.45MHz
Tx 2nd. Local = 73.45MHz
To RX 2nd
Mix.
The comparator in the modulation circuit operates as linearizer. Error correct signal of I and Q sig-
nals are generated at the linearizer circuit and fed to the comparator.
Carrier signal is modulated as pi/4 shift DQPSK signal by I and Q signal. Modulated signal is ampli-
fied by the buffer amplifier (TR301) to the appropriate level to drive the power amplifier.
Output of the buffer amplifier is fed to variable attenuator (CD301). Variable attenuator is controlled
by the digital signal processing circuit to output suitable level.
The output of the attenuator is fed to the Power amplifier module (HC201).
20 CM5000 Mobile Repeater/Gateway - Basic Service Manual OVERVIEW
I-Mod
signal
COM LPF
Buffer Variable
Q-Mod. To PA
Amp Attenuator
Q-Mod
signal
COM LPF
The gate bias voltage for the PA module is controlled by the control circuit and fed to the PA stage
via buffer amplifier (IC202).
The output of the PA is picked up by the directional coupler (CD202) and fed to the linearizer.
PIN diode antenna switch (CD203 and CD 204) are used to realize TDMA fast transmit receive
switching. The control circuit controls the bias current of the antenna switch with transistor (TR201).
The transmit signal that passed the antenna switch is fed to the Low pass filter (FL201) to reject the
spurious signal. Output signal of the LPF is fed to the BNC connector (J201).
13.2 V
PIN
Modulated Directional
PA Diode LPF To Antenna
carrier coupler
SW
PA ON/OFF
DC SW
control
To Linearizer To receiver
OVERVIEW CM5000 Mobile Repeater/Gateway - Basic Service Manual 21
The transmit signal that is picked up by the coupler is attenuated by the variable attenuator (CD303)
and fed to the quadrature demodulator (IC308). The output of the quadrate demodulator is fed to the
ADC of the control circuit and comparator. The control circuit calculates the phase and amplitude dif-
ference between the modulate signal and demodulate signal. Amplitude balance is adjusted at the
factory.
Phase difference is adjusted dynamically by phase shifter (IC319) to adjust the phase of quadrate
demodulator.
The DAC (IC702) output voltage is controlled and this voltage controls phase of the carried via buffer
amplifier (IC318).
The DC offset of the demodulated I and Q signal is corrected by adding the DC voltage from DAC
(IC702) at adder IC (IC318). Each I and Q signal is fed to the comparator and compared with refer-
ence modulation signal.
Transmit signal level is controlled by operating the forward attenuator (CD301) and reverse attenua-
tor (CD303) complementary.
Those attenuator should be controlled depend on the transmit power level. Output voltage of the
DAC (IC702) is changed and this voltage is fed to the buffer amplifier (IC307) and attenuator
(CD301). Then the output level of attenuator (CD301) is changed and input level of the Power ampli-
fier is changed.
Due to transmit level change, the picked up signal by the coupler for quadrature demodulator is
changed. To maintain the input level of the demodulator, attenuation of the reverse attenuator
(CD303) should be change. DAC (IC702) generates the control voltage for the reverse attenuator to
maintain the input level of the quadrature demodulator.
Power Supply
The voltage regulator of the RF circuit is series drop type. DC power via the power switch is fed to
the 9 V regulator IC (IC206). This voltage is used for transmit circuit.
5 V voltage regulator (IC207) provides 5 V power for PLL circuit. Also this voltage is switched by
transistor (TR204) and fed to PLL circuit.
3.3 V voltage regulator (IC210) provides 3.3 V power for PLL circuit.
5 V regulator (IC208) provides 5 V power for the transmitter and receiver circuit. Also this voltage is
switched by transistor (TR206) and fed to receiver circuit.
5 V regulator (IC209) provides 5 V power for the transmitter circuit. Also this voltage is switched by
transistor (TR208) and fed to transmitter circuit.
OVERVIEW
RAMPUD
TEMP
Linearizer and Power Control Block Diagram
Q_MOD Temp
Q-
CM5000 Mobile Repeater/Gateway - Basic Service Manual
MOD
I_MOD
CONT_FD
LIN_ON
AT-LT
AT-FB
SEL_FB
CONT_FB
FB_IQ Q-
DEM
Q_REF
I_REF
Figure 9.
I_Lo
Q_Lo
BPF_SHIFT
From PLL synthesizer
22
OVERVIEW CM5000 Mobile Repeater/Gateway - Basic Service Manual 23
CPU contains FLSH ROM, SD RAM interface, ADC, DAC, LCD controller and serial communication.
The Flash ROM (IC003) stores the source code, font data and portrayal bit map data. SDRAM
(IC002) is working area.
The panel CPU communicates with the main unit CPU via buffer IC (IC008). The serial communica-
tion is baud rate 115.2kbps, 8 bits, non parity and 0 V / 3.3 V level.
Temperature sensor IC (IC004) is used for the temperature compensation of the LCD contrast. The
CPU reads the temperature data of temperature sensor by ADC.
White color LED driver IC (IC106) controls the intensity of the LCD back light LED.
The intensity is controlled by the output voltage of the DAC in the CPU.
CPU oscillates clock frequency with crystal (X001) and multiplies 8 times internally.
The core of the CPU operates at 115.2 MHz, Bus clock operates at 57.6 MHz and peripheral block
operate at 28.8 MHz.
Interface
The Connector (J006) connects the Key/Display unit and main unit.
Microphone signal, received signal for handset, hook signal, control signal and power source of
key/display unit are connected to the J006.
Key
Key is switched ON and OFF by metal dome contacts (SW101 to SW124).
SW101 to SW114 and SW116 to SW124 are scanned by key matrix. The emergency key SW115 is
independent input contact.
Keys are back lighted by the blue LEDs. The back light intensity is controlled as 3 levels (OFF - Low
- High) by controlling the transistor (TR107 and TR108) by the control signal of the CPU.
Switch
The power switch and volume control are adjusted by the rotary knob (SW001).
Pushing the rotary knob turns the radio on. Turning the encoder controls the audio volume and
selects the screen menu.
Other than pushing the rotary knob, pressing the emergency button will turn the radio on. In this
case an emergency call will be originated as soon as power on the radio.
24 CM5000 Mobile Repeater/Gateway - Basic Service Manual OVERVIEW
Display
The display is 2.8 inch STN type 240RGB x 160 dots matrix color LCD module (DD001).
The control signal from the Panel CPU is connected to the LCD unit via the LCD interface connector
(J102).
The LCD is back lighted by the internal back light white LED in the LCD module. Intensity of the LCD
back light is controlled by the output voltage of the back light power supply (IC106) by the output
voltage of the DAC of the CPU.
Back light signal is connected to the LCD unit via the back light connector (J101).
Indicator LED
2 colors LED indicator (CD102) indicates the status of the radio. The panel CPU controls the LED as
red, green or amber via the transistor (TR101 and TR102)
Connector
Microphone is connected to the Key/Display unit via the RJ-45 type connector (J005).
Microphone signal, hook signal, receive signal and function key signal for handset are connected to
the microphone connector.
Audio Circuit
The microphone signal fed to the connector (J005) is amplified by the microphone amplifier (IC107)
and fed to the main unit via interface connector (J006).
Receive signal for the handset is amplified by the audio amplifier (IC107) and fed to the microphone
connector.
The 9 V voltage is fed to the audio circuit, indicator LED and back light LED.
The 5 V voltage is generated by the voltage regulator IC (IC102) and fed to the back light of the LCD.
The 3.3 V voltage is generated by the voltage regulator IC (IC103) and fed to the CPU, LCD module
and other digital circuit.
The 1.5 V voltage is generated by the voltage regulator IC (IC105) and fed to the CPU core.
The reset IC (IC108) generates the reset signal at power on the radio and reset the CPU.
OVERVIEW CM5000 Mobile Repeater/Gateway - Basic Service Manual 25
CHAPTER 4
TEST SETUP & ADJUSTMENT
STEP 1
Set the DC power supply to 13.2 V. (More than 5 A current capacity DC power supply is required.)
STEP 2
Connect under adjustment radio terminal to DC power supply. (The radio terminal should be turned
off in this period.)
STEP 3
Connect the Antenna connector of radio terminal and RF connector of TETRA Tester of AEROFLEX
Type 2968.
STEP 4
Press Menu key and numeric key [2] and the Rotary knob simultaneously. The radio terminal
switches to JRC TEST mode.
AEROFLEX TETRA
Tester
Model 2968 DC Power supply
More than 5A current capacity
13.2 V
RF Cable
Radio Unit
28 CM5000 Mobile Repeater/Gateway - Basic Service Manual TEST SETUP & ADJUSTMENT
Self Check
When a radio unit is turned on, a self check program is started automatically.
If no failures occur then all segments of the display on the front panel are turned on. A short beep
indicates that the self check test has been completed without a failure.
After the test radio unit displays its own ID for approximately 1 second and switches to normal oper-
ation.
Error Codes
If the radio unit fails in the self check routine, an error code is shown on the display and a alert beep
is played.
S1
Left
Enter
STEP 1
Set the IFR to the following parameter in system parameters.
(MAX TX LEVEL) to 40 dBm
STEP 2
RF Gen Level
-112 dBm
STEP 3
Channel Plan
Set to "USER DEFINED"
STEP 4
Channel Block setting in "User Defined" menu
i) Select "CHANNEL BLOCK 1" and enter the following parameters:
CHANNEL BLOCK EXCLUDED
LOWEST CHANNEL 0000
HIGHEST CHANNEL 4095
LOWEST CHANNEL TX FREQUENCY 290.0125 MHz
DUPLEXT OFFSET 10 MHz
CHANNEL SPACING 25 kHz
ii) Select "CHANNEL BLOCK 2" and enter the following parameters:
CHANNEL BLOCK EXCLUDED
LOWEST CHANNEL 0000
HIGHEST CHANNEL 4095
LOWEST CHANNEL TX FREQUENCY 310.0125 MHz
DUPLEXT OFFSET -10 MHz
CHANNEL SPACING 25 kHz
iii) Select "CHANNEL BLOCK 2" and enter the following parameters:
CHANNEL BLOCK EXCLUDED
LOWEST CHANNEL 0000
HIGHEST CHANNEL 4095
LOWEST CHANNEL TX FREQUENCY 390.0125 MHz
DUPLEXT OFFSET 10 MHz
CHANNEL SPACING 25 kHz
iv) Select "CHANNEL BLOCK 2" and enter the following parameters:
CHANNEL BLOCK EXCLUDED
LOWEST CHANNEL 0000
HIGHEST CHANNEL 4095
LOWEST CHANNEL TX FREQUENCY 410.0125 MHz
DUPLEXT OFFSET -10 MHz
CHANNEL SPACING 25 kHz
A) Normal setting:
STEP 4
i) Press the (USER DEFINED KEY) and set the following parameters:
FREQ BAND 3
OFFSET 3
DUPLEX SPACING 0
REVERSE 0
TEST SETUP & ADJUSTMENT CM5000 Mobile Repeater/Gateway - Basic Service Manual 31
ii) Select "CHANNEL BLOCK 1" and set the following parameter:
CHANNEL BLOCK INCLUDED
Other Channel Blocks (Channel Block 2, 3, 4) set to "EXCLUDED"
B) Reverse setting:
STEP 4
i) Press the (USER DEFINED KEY) and set the following parameters:
FREQ BAND 3
OFFSET 3
DUPLEX SPACING 0
REVERSE 1
ii) Select "CHANNEL BLOCK 2" and set the following parameter:
CHANNEL BLOCK INCLUDED
Other Channel Blocks (Channel Block 1, 3, 4) set to "EXCLUDED"
A) Normal setting:
STEP 4
i) Press the (USER DEFINED KEY) and set the following parameters:
FREQ BAND 4
OFFSET 3
DUPLEX SPACING 0
REVERSE 0
ii) Select "CHANNEL BLOCK 3" and set the following parameter:
CHANNEL BLOCK INCLUDED
Other Channel Blocks (Channel Block 1, 2, 4) set to "EXCLUDED"
B) Reverse setting:
STEP 4
i) Press the (USER DEFINED KEY) and set the following parameters:
FREQ BAND 4
OFFSET 3
DUPLEX SPACING 0
REVERSE 1
ii) Select "CHANNEL BLOCK 4" and set the following parameter:
CHANNEL BLOCK INCLUDED
Other Channel Blocks (Channel Block 1, 2, 3) set to "EXCLUDED"
32 CM5000 Mobile Repeater/Gateway - Basic Service Manual TEST SETUP & ADJUSTMENT
Preparation
Press Menu key, numeric key [2] and the Rotary knob simultaneously.
STEP 1
Set the radio to channel 3200 using numeric keys and confirm.
STEP 2
Check the voltage of test point TP640. The normal voltage is higher than 2 V.
If the voltage is out of the above range, it means the VCO is unlocked.
STEP 3
Press # the 1st Local VCO is changed from PLL1 to PLL2.
STEP 4
Check voltage at test point TP642 .The normal voltage is higher than 2v.If the voltage is outside the
above range it means the VCO is unlocked.
STEP 1
Set the radio to channel 3200 using numeric keys and confirm.
STEP 2
Check the Voltage of test point TP644, using high impedance Digital Volt Meter.
The normal voltage of the test point TP644 is higher than 2 V.
If the voltage is out of the above range, it means the VCO is unlocked.
TEST SETUP & ADJUSTMENT CM5000 Mobile Repeater/Gateway - Basic Service Manual 33
Preparation
Preparation of AEROFLEX Tester 2968
STEP 1
Set the AEROFLEX Tester to T1 LOOP BACK MODE as follows:
T1 Loop Back ON
Burst Mode Normal
Signal format TCH/7.2
RF Level -110 dBm
STEP 2
Set the AEROFLEX tester channel to 3200.
STEP 3
Press Menu key, numeric key [2] and the Rotary knob simultaneously. The radio terminal enters T1
TEST mode.
STEP 4
Set the tested radio terminal to channel 3200.
STEP 5
Press [*] key for 12.5 kHz offset. CM5000 displays + on right side of channel number.
Confirm sensitivity
STEP 1
Confirm that tester BER indication is less than 1%.
34 CM5000 Mobile Repeater/Gateway - Basic Service Manual TEST SETUP & ADJUSTMENT
Preparation
STEP 1
Test connection diagram is shown in figure 11.
STEP 2
Press Menu key, numeric key [9] and the Rotary knob simultaneously.
STEP 3
While the bar graph is shown on the display, press the [EMG] and [Left] key simultaneously.
The radio terminal enters RX ADJUST MODE.
STEP 4
Press and hold the Menu key for 5 seconds disregarding the error tone.
STEP 5
Set the radio to channel 3600 using numeric keys.
STEP 6
Confirm the frequency as 390.0125 MHz.
STEP 7
Press the key [BST] on the Control head.
The radio terminal enters TX ADJUST MODE.
Adjustment
STEP 1
Set the radio to channel 3600 using numeric keys.
STEP 2
Set IFR2968 to A Band Normal setting.
STEP 1
Press the key [BST] on the Control head.
The the radio terminal switches to TX ADJUST MODE.
STEP 2
Confirm the CH3600 380.0125 MHz on the display.
STEP 3
Confirm the POWER 37 dBm on the display.
TEST SETUP & ADJUSTMENT CM5000 Mobile Repeater/Gateway - Basic Service Manual 35
STEP 4
Confirm the LT is selected.
STEP 5
Adjust the output power to +37+/-0.5 dBm using the Rotary knob.
STEP 6
Press the [Right] navigation key for course adjustment.
STEP 7
Press the [Up] navigation key to select FB.
STEP 8
Adjust the output power to +37+/-0.5 dBm using the Rotary knob.
STEP 9
Press the [Right] navigation key for course adjustment.
STEP 10
Press the [Left] navigation key and confirm POWER 35 dBm on the display.
STEP 11
Confirm the LT is selected.
STEP 12
Adjust the output power to +35+/-0.5 dBm using Rotary encoder
STEP 13
Press the [Right] navigation key for course adjustment.
STEP 14
Press the [Up] navigation key to select FB.
STEP 15
Adjust the output power to +35+/-0.5 dBm using the Rotary knob.
STEP 16
Press the [Right] navigation key for course adjustment.
STEP 17
Press the [Left] navigation key and confirm POWER 30 dBm on the display.
STEP 18
Confirm the LT is selected.
STEP 19
Adjust the output power to +30+/-0.5 dBm using the Rotary knob.
STEP 20
Press the [Right] navigation key for course adjustment.
STEP 21
Press the [Up] navigation key to select FB.
STEP 22
Adjust the output power to +30+/-0.5 dBm using the Rotary knob.
STEP 23
Press the [Right] navigation key for course adjustment.
36 CM5000 Mobile Repeater/Gateway - Basic Service Manual TEST SETUP & ADJUSTMENT
STEP 24
Press the [Left] navigation key and confirm POWER 25 dBm on the display.
STEP 25
Confirm the LT is selected.
STEP 26
Adjust the output power to +25+/-0.5 dBm using the Rotary knob.
STEP 27
Press the [Right] navigation key for course adjustment.
STEP 28
Press the [Up] navigation key to select FB.
STEP 29
Adjust the output power to +25+/-0.5 dBm using the Rotary knob.
STEP 30
Press the [Right] navigation key for course adjustment.
STEP 31
Press the [Left] navigation key and confirm POWER 20 dBm.on the display.
STEP 32
Confirm the LT is selected.
STEP 33
Adjust the output power to +20+/-0.5 dBm using the Rotary knob.
STEP 34
Press the [Right] navigation key for course adjustment.
STEP 35
Press the [Up] navigation key to select FB.
STEP 36
Adjust the output power to +20+/-0.5 dBm using the Rotary knob.
STEP 37
Press the [Right] navigation key for course adjustment.
STEP 38
Press the [Left] navigation key and confirm POWER 15 dBm on the display.
STEP 39
Confirm the LT is selected.
STEP 40
Adjust the output power to +15+/-0.5 dBm using the Rotary knob.
STEP 41
Press [Right] key for course adjustment.
STEP 42
Press the [Up] navigation key to select FB. FB should be highlighted by black background.
STEP 43
Adjust the output power to +15+/-0.5 dBm using the Rotary knob.
TEST SETUP & ADJUSTMENT CM5000 Mobile Repeater/Gateway - Basic Service Manual 37
STEP 44
Press the [Right] navigation key for course adjustment.
STEP 45
After finishing the power adjustment, press and hold the Enter key for 1 second.
The MEMORY message appears on the display and audible tone is played.
STEP 46
Press [RX] to terminate transmitting.
STEP 1
Set the radio to channel 4000 using numeric keys.
STEP 2
Set IFR2968 to A Band Normal setting.
STEP 1
Set the radio to channel 4400 (IFR 0400) using numeric keys.
STEP 2
Set IFR2968 to B Band Normal setting.
STEP 1
Set the radio to channel 4800 (IFR 0800) using numeric keys.
STEP 2
Set IFR2968 to B Band Normal setting.
STEP 1
Set the radio to channel 5200 (IFR 1200) using numeric keys.
STEP 2
Set IFR2968 to B Band Normal setting.
STEP 1
Set the radio to channel 5600 (IFR 1600) using numeric keys.
STEP 2
Set IFR2968 to B Band Normal setting.
To store the power adjustments, turn off the radio by pressing the [PWR] key.
TEST SETUP & ADJUSTMENT CM5000 Mobile Repeater/Gateway - Basic Service Manual 39
Receiver Adjustment
Preparation
STEP 1
Set the IFR2968 to B band Normal setting.
STEP 2
Set the IFR2968 as follows:
Channel 0200
RF level -70 dBm
STEP 3
Press Menu key, numeric key [9] and the Rotary knob simultaneously.
STEP 4
While the bar graph is shown on the display, press the [EMG] and [Left] keys simultaneously.
Then the radio terminal goes into RX ADJUST MODE.
STEP 5
Press and hold the Menu key for 5 seconds disregarding the error tone.
STEP 6
Set the radio to channel 4200 using numeric keys.
STEP 7
Confirm the frequency as 405.0125 MHz.
Adjustment
STEP 1
Confirm the STAGE LEVEL HI 1 on the display and wait 10 seconds.
STEP 2
Press and hold the Enter key for 1 second.
The MEMORY message appears on the display and audible tone is played.
STEP 3
Press the [Up] navigation key and confirm the STAGE LEVEL HI 2 on the display.
STEP 4
Wait 5 seconds. Then press and hold the Enter key for 1 second.
Then MEMORY message appears on the display and audible tone is playes.
STEP 5
Set the IFR2968 as follows:
RF level -90 dBm
STEP 6
Press the [Up] navigation key and confirm the STAGE LEVEL LOW on the display.
40 CM5000 Mobile Repeater/Gateway - Basic Service Manual TEST SETUP & ADJUSTMENT
STEP 7
Wait 5 seconds. Then press and hold the Enter key for 1 second.
The MEMORY message appears on the display and audible tone is played.
STEP 8
Press the [Up] navigation key and confirm the RSSI CHECK on the display.
STEP 9
Confirm the RSSI is within the 90 +/- 2 dBm.
STEP 10
Change IFR2968 RF level to -70 dBm.
STEP 11
Confirm the RSSI is within the 70 +/- 2 dBm.
STEP 12
Turn off the radio by pressing the Rotary knob key
CONNECTOR PIN FUNCTION CM5000 Mobile Repeater/Gateway - Basic Service Manual 41
CHAPTER 5
CONNECTOR PIN FUNCTION
Connectors
This section presents the following connectors and their pin functions:
Microphone connector
Accessory connectors
Antenna connector
GPS antenna connector
Power connector
42 CM5000 Mobile Repeater/Gateway - Basic Service Manual CONNECTOR PIN FUNCTION
This connector provides the communication with Fist Microphone, Handset and Desk Microphone
using 10-pin RJ type connector.
1 No connection
2 No connection
4 Ground Ground
7 No connect
Accessory Connector 1
This connector provides communication with External Speaker, External Microphone, External PTT
Switch, External Emergency Switch, Ignition Sense Cable External Alarm Switch, Buzzer and RS-
232C interface using 20-pin type connector.
10 Ignition switch input To turn on the Radio with Ignition input (Active high)
12 Audio PA Enable input To on/off Speaker input (SP active when High or Open)
14 Hook switch input Hook switch signal (High=Off hook, Low=On hook)
Accessory Connector 2
This connector provides the communication with RS-232C interface using 7-pin type connector.
1 GND Ground
2 No connection
7 GND Ground
Antenna Connector
This connector will provide the connection with RF Antenna for 380 430 MHz band.
Item Specification
Impedance 50 ohm
CONNECTOR PIN FUNCTION CM5000 Mobile Repeater/Gateway - Basic Service Manual 45
Item Specification
Impedance 50 ohm
Power Connector
This connector provides the connection to the car battery or the power supply via power cable.
Item Specification
Voltage 13.2 V
46 CM5000 Mobile Repeater/Gateway - Basic Service Manual
CHAPTER 6
PARTS LISTS AND DRAWINGS
LCD
IF3G Cables
Cables
Control Stations
Mounting Kits
Junction Box
Antennas
Miscellaneous
Diagrams
2
3
4
8
1
7
6
5
50
REPLACEMENT PARTS & KITS CM5000 Mobile Repeater/Gateway - Basic Service Manual 51
APPENDIX A
REPLACEMENT PARTS & KITS
Service for the mobile units is based on the substitution method; a faulty part is replaced by a work-
ing one, providing quicker service to the customer. For example, if the controller board is faulty, it is
replaced. If the mobile requires more complete testing or servicing than that is available at field level,
it is sent to the European Radio Service Centre; where it is serviced, and returned to the Regional
Service Centre.
Level 1 Maintenance
This manual covers Level 1 Maintenance: at Level 1 maintenance you replace the transceiver
and/or accessories and send the faulty transceiver and/or accessories to higher level of mainte-
nance. For details, please refer to Technical Support and Further Assistance from Motorola.
The CM5000 mobiles are programmed at the factory. They cannot be tuned at the field service
level.
The Level 2 and 3 maintenance can be only performed at the Motorola Service Center/Depot.
Contact your local Motorola G&PS for information.
52 CM5000 Mobile Repeater/Gateway - Basic Service Manual REPLACEMENT PARTS & KITS
Service Information
E-mail: ESSC@motorola.com
Piece Parts
Some replacement parts, spare parts, and/or product information can be ordered directly. If a com-
plete Motorola part number is assigned to the part, it is available from Motorola Radio Aftermarket
and Accessory Division (AAD). If no part number is assigned, the part is not normally available from
Motorola. If a parts list is not included, this generally means that no user-serviceable parts are avail-
able for that kit or assembly.
Request for help in identification of non-referenced spare parts should be directed to the Customer
Care Organization of Motorolas local area representation. Orders for replacement parts, kits and
assemblies should be placed directly on Motorolas local distribution organization or via the Extranet
site Motorola Online at: https://emeaonline.motorola.com.
Technical Support
Technical support is available to assist the dealer/distributor in resolving any malfunction which may
be encountered. Initial contact should be by telephone wherever possible.
When contacting Motorola Technical Support, be prepared to provide the product model number
and the units serial number.
You can also contact the Customer Help Desk through the following web address:
http://www.motorola.com/governmentandenterprise/contactus.
Piece Parts
Some replacement parts, spare parts, and/or product information can be ordered directly. If a com-
plete Motorola part number is assigned to the part, it is available from Motorola Radio Aftermarket
and Accessory Division (AAD). If no part number is assigned, the part is not normally available from
Motorola. If a parts list is not included, this generally means that no user-serviceable parts are avail-
able for that kit or assembly.
Note on this digital TETRA Terminal: The CPS has no capability to tune the terminal. Tuning the
terminal can only be performed at the factory or at the appropriate Motorola Repair Centre.
Component replacement can affect the terminal tuning and must only be performed by the
appropriate Motorola Repair Centre.
Request for help in identification of non-referenced spare parts should be directed to the Customer
Care Organization of Motorolas local area representation. Orders for replacement parts, kits and
assemblies should be placed directly on Motorolas local distribution organization or via Motorola
Online (Extranet).
54 CM5000 Mobile Repeater/Gateway - Basic Service Manual REPLACEMENT PARTS & KITS
Piece Parts:
To order parts in Latin America and the Caribbean contact your local Motorola CGISS representa-
tive.
MOTOROLA, INC.
Latin American Countries Region
789 International Parkway
Sunrise, FL 33325
USA 954-723-8959
MOTOROLA DE ARGENTINA
Ave. del Libertador 1855
B1638BGE, Vicente Lopez
Buenos Aires, Argentina
5411-4317-5300
MOTOROLA CHILE
Ave. Nueva Tajamar 481
Edif. World Trade Center
Of. 1702, Torre Norte
Las Condes
Santiago, Chile
562-338-9000
Technical Support:
https://businessonline.motorola.com, go to Contact Us to request technical support
Some replacement parts, spare parts, and/or product information can be ordered directly. If a com-
plete Motorola part number is assigned to the part, it is available from Motorola. If no part number is
assigned, the part is not normally available from Motorola. If the part number is appended with an
asterisk, the part is serviceable by Motorola Depot only. If a parts list is not included, this generally
means that no user-serviceable parts are available for that kit or assembly.
56 CM5000 Mobile Repeater/Gateway - Basic Service Manual
TETRA Mobil-Repeater/Gateway
380 430 MHz (MT912CR)
Wartungs- und
Installationshandbuch
Artikelnummer: 6866588D38-A
@6866588D38@
GCD-EMEA, Ausgabe: 01.2009
ii CM5000 Mobiles Funkgert Wartungs- und Installationshandbuch COPYRIGHT
COPYRIGHT
Copyright
Marken
INHALTSVERZEICHNIS
COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Copyright-Hinweis zur Computersoftware . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Marken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
INHALTSVERZEICHNIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . III
DOKUMENTVERLAUF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VI
KAPITEL 1
UMFANG UND GARANTIEINFORMATIONEN ...............................1
Umfang dieses Handbuchs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Handbcher und Bedienungsanleitungen . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
KAPITEL 2
INFORMATIONEN ZUM MODELL .........................................5
CM5000 Informationen zum Modell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Funktionen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Technische Spezifikationen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Funktionsspezifikationen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
KAPITEL 3
BERSICHT ..........................................................9
Allgemein . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Digitaler Steuerkreis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Funkschaltkreis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Tasten- und Anzeige-Einheit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
KAPITEL 4
TESTAUFBAU UND EINSTELLUNGEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Typische Testeinstellungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Selbsttest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
IFR 2968 Kanal- und Moduseinstellung . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
RX VCO-Frequenzeinstellung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Besttigen der Empfngerempfindlichkeit . . . . . . . . . . . . . . . . . . . . . . . . . 34
Einstellung der Sendeleistung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Empfngereinstellung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
KAPITEL 5
ANSCHLUSSPINBELEGUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Anschlsse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Mikrofonanschluss (Konsole) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Zubehranschluss 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Zubehranschluss 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Antennenanschluss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
GPS-Antennenanschluss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Netzanschluss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
KAPITEL 6
ERSATZTEILLISTE UND ZEICHNUNGEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Ersatzteilliste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Ersatzteilliste Zubehr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Abbildungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
INHALTSVERZEICHNIS CM5000 Mobiles Funkgert Wartungs- und Installationshandbuch v
ANHANG A
ERSATZTEILE UND BAUSTZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Wartung von CM5000-Mobilgerten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Kundendienstinformationen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Europa, Naher Osten und Afrika . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Asien/Pazifikraum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Lateinamerika . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
vi CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch DOKUMENTVERLAUF
DOKUMENTVERLAUF
In diesem Handbuch wurden seit der vorherigen Ausgabe die folgenden wichtigen nderungen vorgenommen:
Alle Zweiwegefunkgerte von Motorola werden so entwickelt, hergestellt und getestet, dass eine
Entsprechung des von der Regierung festgelegten Funkwellenbelastungsgrads sichergestellt wird.
Darber hinaus empfehlen die Hersteller den Benutzern von Zweiwegefunkgerten spezifische
Betriebsanweisungen. Diese Anweisungen sind wichtig, da sie die Benutzer ber die energetische
Funkwellenbelastung informieren und einfache Verfahren angeben, wie diese gesteuert
werden knnen.
Auf den folgenden Websites erhalten Sie weitere Informationen zur energetischen
Funkwellenbelastung und zur Steuerung Ihrer Belastung, um die Konformitt mit den festgelegten
Funkwellenbelastungsgrenzen sicherzustellen:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
Das Motorola-Funkgert wurde so entwickelt und getestet, dass es eine Reihe von nationalen
und internationalen Standards und Richtlinien (nachfolgend aufgefhrt) fr die menschliche
Funkwellenbelastung durch elektromagnetische Hochfrequenzenergie erfllt. Dieses
Funkgert ist konform mit den Funkwellenbelastungsgrenzen von IEEE und ICNIRP
fr Arbeitsumgebungen/gesteuerte Umgebungen mit Funkwellenbelastung bei
Betriebsanforderungsfaktoren von bis zu 50 % Sprechen 50 % Hren und ist von IEEE/ICNIRP
nur fr die Nutzung in Arbeitsumgebungen zugelassen. In Bezug auf die Messung von RF-Energie
fr die Konformitt mit diesen Belastungsrichtlinien erzeugt die Antenne des Funkgerts nur bei der
bertragung (whrend des Sprechens) messbare RF-Energie, nicht jedoch beim Empfang (Hren)
oder im Standby-Modus.
x CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch Produktsicherheit und Funkwellenbelastung
American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers
(IEEE) C95. 1-1992
Institute of Electrical and Electronic Engineers (IEEE) C95.1 Fassung von 1999
Beschluss 256 der brasilianischen Regulierungsbehrde ANATEL vom 11. April 2001
(Zustzliche Anforderungen fr die Zertifizierung von SMR-, Zellulartelefonie- und
PCS-Produkten)
Produktsicherheit und Funkwellenbelastung CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch xi
Um die Funkwellenbelastung fr sich und andere zu steuern und Konformitt mit den
entsprechenden Grenzen sicherzustellen, halten Sie sich stets an folgende Verfahren:
Richtlinien:
Die Anweisungen in Bezug auf das Bewusstsein des Benutzers sind mit dem Gert
weiterzugeben, wenn es an andere Benutzer bertragen wird.
Verwenden Sie das Gert nicht, wenn die hier beschriebenen Betriebsanforderungen nicht
erfllt werden.
Anweisungen:
berschreiten Sie bei der bertragung nicht den klassifizierten Betriebsfaktor von 50 %
der Gesamtzeit. Drcken Sie zur bertragung (Sprechen) die Sprechtaste (PTT).
Um Gesprche zu empfangen, lassen Sie die Sprechtaste (PTT) los. Es ist wichtig, dass bei
der bertragung der Faktor von 50 % nicht berschritten wird, da dieses Funkgert nur bei
der bertragung eine messbare energetische Funkwellenbelastung generiert (in Bezug auf
die Messung fr die Standardkonformitt).
Starten Sie die bertragung nur, wenn sich keine Personen innerhalb des in Tabelle 1
dargestellten seitlichen Mindestradius von einem Fahrzeug mit einer ordnungsgem
installierten Antenne befinden. Dieser Abstand zu externen, gem den
Installationsanweisungen montierten Antennen ist zur Einhaltung der oben aufgefhrten
Standards im Hinblick auf die Funkwellenbelastung erforderlich.
Installieren Sie Antennen im mittleren Bereich des Dachs oder des Kofferraums, und
bercksichtigen Sie dabei die Belastung fr Fahrzeuginsassen auf dem Rcksitz, die
entsprechenden Anweisungen und Beschrnkungen im Installationshandbuch des Funkgerts
sowie die Hinweise des Antennenherstellers.
Heckinstallationen sind nur bei Fahrzeugen mit flachem Kofferraumdeckel mglich und in
einigen Fllen auf bestimmte Funkgertmodelle und Antennen beschrnkt. Ausfhrliche
Informationen zur Installation zugelassener Antennen fr eine einfachere Einhaltung des
empfohlenen Abstands von Personen finden Sie in der Installationsanleitung des Funkgerts.
Zugelassenes Zubehr
Dieses Funkgert entspricht den RF-Sicherheitsstandards, sofern es mit den mit diesem
Produkt mitgelieferten oder fr dieses Produkt vorgesehenen Motorola-Zubehr betrieben wird.
Die Verwendung von Zubehr anderer Hersteller kann zu einer Nichteinhaltung der
RF-Sicherheitsstandards fhren.
Eine Liste der von Motorola zugelassenen Antennen erhalten Sie bei Ihrem Hndler oder
lokalem Motorola-Ansprechpartner. Ihren nchsten Hndler finden Sie ber folgende Website:
http://www.motorola.com/businessandgovernment/wemea/en-gb/public/functions/dealerlocator/
dealerlocator.aspx
Zustzliche Informationen
Zustzliche Informationen zu Belastungsanforderungen oder andere Schulungsinformationen
finden Sie unter
http://www.motorola.com/rfhealth
Montieren Sie die Antenne wenn irgend mglich auf dem Dach eines Gebudes oder auf
einem Mast.
Produktsicherheit und Funkwellenbelastung CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch xiii
Elektromagnetische Strung/Vertrglichkeit
Einrichtungen
Fahrzeuge
Um Interferenzen zwischen dem Funkgert und elektronischen Steuereinheiten des Fahrzeugs wie
ABS, Motor oder dem Getriebesteuergert zu vermeiden, sollte das Funkgert nur durch erfahrene
Techniker und unter Bercksichtigung der folgenden Vorsichtsmanahmen installiert werden:
1. Empfehlungen fr die Installation Funkgerts finden Sie in den Hinweisen des Herstellers und
anderen Merkblttern.
2. Stellen Sie vor der Installation des Funkgerts die Position der elektronischen Steuereinheiten
und zugehrigen Verkabelungen im Fahrzeug fest.
3. Verlegen Sie die Kabel des Funkgerts einschlielich der bertragungsleitung der Antenne in
mglichst groem Abstand zu den elektronischen Steuereinheiten und zugehrigen Verkabelungen.
xiv CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch Produktsicherheit und Funkwellenbelastung
Fahrersicherheit
Erkundigen Sie sich an Ihrem jeweiligen Aufenthaltsort stets nach den dort geltenden Gesetzen und
Regelungen zur Nutzung von Funkgerten beim Autofahren. Diese mssen unbedingt eingehalten
werden. Beachten Sie bei der Verwendung des Funkgerts whrend der Fahrt Folgendes:
Wenn die Verkehrssituation dies erfordert, verlassen Sie die Fahrbahn und parken Sie, bevor
Sie einen Ruf ttigen oder entgegennehmen.
ZUSTZLICHE
ACHTUNG
SICHERHEITSINFORMATIONEN FR
SERVICE UND INSTALLATION DES
Installations-, Wartungs- und Reparaturarbeiten drfen ausschlielich von autorisiertem und geschultem
Personal ausgefhrt werden.
KAPITEL 1
UMFANG UND GARANTIEINFORMATIONEN
Dieses Handbuch ist nur fr die Verwendung durch geschulte Servicetechniker bestimmt, die
mit vergleichbaren Gerten vertraut sind. Es enthlt wichtige Informationen zur Installation der
beschriebenen Ausrstung und entspricht dem Stand des Druckdatums. nderungen, die nach dem
Druckdatum vorgenommen wurden, knnen durch eine vollstndige berarbeitung des Handbuchs
oder als Zustze eingefgt werden.
Copyright
Dokumentverlauf
KAPITEL 3 bersicht
KAPITEL 5 Anschlusspinbelegung
Bedienungsanleitungen
6866539D60 CM5000 Basic User Guide (Englisch, Deutsch, Franzsisch, Spanisch, Litauisch)
Installationshandbuch
Bedienungsanleitung fr Programmierer
Garantie
Motorola bietet einen langfristigen Support fr seine Produkte. Dieser Support umfasst den
vollstndigen Austausch und/oder die Reparatur des Produkts whrend des Garantiezeitraums und
Service/Reparatur oder Support fr Ersatzteile auerhalb des Garantiezeitraums. Garantiezeitraum
und Anweisungen zur Rckgabe.
Wenden Sie sich vor der Rcksendung von Funkgerten an die zustndige Motorola-
Garantieannahmestelle oder Ihren Motorola-Hndler, -Lieferanten oder -Wiederverkufer.
Allen zurckgegebenen Produkten muss ein Formular zum Garantieanspruch beigefgt werden,
dass ber den Kundendienstvertreter oder das Motorola Online Extranet (MOL) oder Ihren
Motorola-Hndler, -Lieferanten oder -Wiederverkufer bezogen werden kann (eine Liste dazu
finden Sie in Anhang A). Die Rcksendung der Produkte sollte in der Originalverpackung oder
einer ordnungsgemen Verpackung erfolgen, um sicherzustellen, dass das Produkt whrend
des Transports nicht beschdigt wird.
UMFANG UND GARANTIEINFORMATIONEN CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 3
Nach Ablauf des Garantiezeitraums bietet Motorola fr die Fortsetzung des Supports seiner
Produkte zwei Mglichkeiten.
KAPITEL 2
INFORMATIONEN ZUM MODELL
Das CM5000 ist ein TETRA-Mobilfunkgert mit erweiterten Funktionen, bei dessen Entwicklung
die neueste Digitalfunktechnologie und Mikro-Computertechnologie eingesetzt wurde.
Das Betriebsprotokoll und die Anwendungen basieren auf den ETS TETRA-Standards.
Funktionen
- Statusnachrichten
- Notruf
- Multisite-Roaming
- Datenkommunikations-Luftschnittstelle
- Serieller Datenanschluss
- GPS-Empfngerverbindung
6 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch INFORMATIONEN ZUM MODELL
Technische Spezifikationen
ALLGEMEIN EMPFNGER SENDER
ETSi: ETS 300 394-1 Empfngertyp: berlagerungsempfnger Modulationstyp: /4DQPSK
Typnummer: Frequenzbereich: RF-Leistung:
380 430 MHz MT912CR 380 430 MHz TMO 3,16 W/35 dBm
DMO 5 W/37 dBm
Funktionsspezifikationen
Funktion Spezifikationen
Gesprchsgruppen TMO 2048
Telefonbucheintrge 1000
Textnachrichtenliste 20
Statusliste 100
Sto, Fall und Vibration ETS 300 019-1-5 Klasse 5M2 und Klasse 5M3
KAPITEL 3
BERSICHT
Allgemein
Das CM5000 TETRA-Funkgert besteht aus zwei Baugruppen. Eine befindet sich
in der Haupteinheit, die andere in der Tasten-/Anzeige-Einheit.
Die Haupteinheit besteht aus dem digitalen Steuerkreis und dem Funkschaltkreis.
Digitaler Steuerkreis
Der digitale Steuerkreis steuert die bereinstimmung der gesamten Funkausstattung mit dem
Tastenbetrieb der Tasten-/Anzeige-Einheit oder den von der TRBS (TETRA Network Radio Base
Station) empfangenen Signalen, die ber den Funkschaltkreis oder als externe Daten ber den
PEI-Schaltkreis (Peripheral Equipment Interface Circuit) eingespeist werden.
System Controller
Digitalsignalverarbeitung (DSV)
Externem Schnittstellenschaltkreis
10 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch BERSICHT
System Controller
Der System Controller besteht aus SOC (System On Chip), ROM/RAMs und dem
Netzspannungsregler.
SOC (IC 601) enthlt Mikroprozessor (CPU), DSP (Digital Signal Processor) und
Peripherieschaltkreis. und arbeitet durchgehend, wenn das Funkgert eingeschaltet ist.
Es tastet die Signalursache von Schaltbewegungen des Funkgerts und das empfangene
Steuersignal von einer TRBS ab, das vom digitalen Signalprozessorschaltkreis verarbeitet wird.
Wenn eine dieser Signalleitungen sich verndert, wei der Mikroprozessor, was zu tun ist,
und sendet das Steuersignal zu dem jeweiligen Schaltkreis.
Der Mikroprozessor im SOC kopiert das Programm vom Flash-ROM zum SDRAM (IC603),
wenn das Funkgert eingeschaltet wird. Der Mikroprozessor liest das Programm vom SDRAM
und fhrt die Anweisungen entsprechend aus.
Der Funkparameter des Gerts wird im freien Bereich des Flash-ROM (IC602) installiert.
Die temporren Daten des Gerts werden im SDRAM (IC603) und SRAM (IC604) gespeichert.
Die Funkparameter (z. B. Ausgangsstromanpassung, Empfngereinstellung) werden im
EEPROM (IC605) gespeichert.
Digitalsignalverarbeitung (DSV)
Der Digitalsignalverarbeitungs-Schaltkreis besteht aus folgenden Gerten:
Das empfangene Analogsignal, das in die IF-Frequenz umgewandelt wird, wurde von dem
10-Bit-ADU in das Digitalsignal umgewandelt und an den SOC weitergeleitet.
Das Digitalsignal wird quadratur-demoduliert und gefiltert und dann in das I/Q-Signal umgewandelt.
Dann wird das dekodierte Signal bei einem Sprachsignal an den Sprach-CODEC oder
im Falle eines Steuersignals oder bei Meldungsdaten an die CPU geleitet.
Die DSV des Sprach-CODEC sendet die kodierten Sprachdaten an den Kanal-CODEC.
Die CPU sendet die Steuer- und Meldungsdaten an den Kanal-CODEC.
Die DSV des Kanal-CODEC fhrt fr das Signal die Kanalkodierung und das Framing durch
und wandelt es in das I/Q-Signal um.
Das I/Q-Signal wird durch die Signalverarbeitungs-Hardware im SOC gefiltert (Alpha Rolloff =
0,35). Dann wird es als I/Q-Signal durch den 12-Bit-DAU in das Analogsignal umgewandet.
12 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch BERSICHT
Sprach-CODEC (ACELP)
Analoge Sende-Sprachdaten werden durch den linearen CODEC in das digitale Signal
umgewandelt und an die DSV des Sprach-CODEC geleitet.
Die DSV des Sprach-CODEC komprimiert die digitalen Eingangsdaten mit Hilfe des ACELP-
Algorithmus in die kodierten Sprachdaten. und leitet die Daten an die DSV des Kanal-CODEC.
Empfangene digitale Sprachdaten werden von der DSV des Kanal-CODEC als kodierte
Sprachdaten an die DSV des Sprach-CODEC geleitet.
Die DSV des Sprach-CODEC dekomprimiert die kodierten Sprachdaten und leitet sie an den
linearen CODEC weiter. Das digitale Signal wird durch den linearen CODEC in ein analoges
Signal umgewandelt und als Analogsignal ausgegeben.
Frequenzkompensation
Die DSV des Kanal-CODEC berechnet Frequenzfehler zwischen Funkgert und Basisstation
(Masterstation in DMO). Sie steuert den VC-TCXO durch den DAU, um den Frequenzfehler
zu minimieren. Der VC-TCXO fungiert als Zeitbasisreferenz des Funkgerts.
Die DSV des Kanal-CODEC steuert basierend auf der Empfangssignalstrke und der Broadcast-
Information von der Basisstation die Ausgangsleistung durch den DAU.
Auerdem fhrt die DSV Berechnungen durch, um die Strung des Senders und den
Trgerrest zu minimieren, und steuert die kartesische Rckkopplung durch den DAU.
VC-TCXO
Das Referenzsignal fr den PLL-Synthesizer wird vom VC-TCXO generiert. Die
Oszillationsfrequenz des 13 MHz-Referenzsignals wird durch die DSV des Kanal-CODEC
feinreguliert. Der Frequenzfehler zwischen Funkgert und TRBS wird gelesen und das
Fehlerkorrektursignal wird vom DPS generiert. Das Fehlerkorrektursignal wird dann an
den Spannungsregelungskreis des TXCO geleitet, um die Frequenz abzustimmen.
Schnittstelleneinheit
Die Haupteinheit verfgt ber einen analogen und digitalen Schnittstellenschaltkreis fr die
externe Schnittstelle.
Digitale Schnittstelle
Die digitale Schnittstelle wird mit dem Anschluss J902 und J904 auf der Rckseite der Haupteinheit
verbunden. Diese Anschlsse sind zu einem Anschluss kombiniert, aber elektrisch unabhngig.
Bei dem einen handelt es sich um eine RS232-Schnittstelle, bei dem anderen um eine 0-V/3-V-
Schnittstelle.
Die serielle RS232-Schnittstelle wird auf der Rckseite der Haupteinheit mit dem 7-Pin-Anschluss
(J904) verbunden. Dieser Anschluss wird zur Programmierung der Funkparameter, der AT-
Befehlssteuerung, der Datenausgabe fr das Protokoll etc. verwendet.
Die Verwendung ist von der Einstellung im Native Programmer abhngig, der
im Programmierhandbuch (Artikelnr. 6866539D46) beschrieben ist.
BERSICHT CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 13
Die serielle 0 V-/3 V-Schnittstelle wird mit dem 20-Pin-Anschluss (J902) verbunden. Dieser
Anschluss wird fr den gleichen Zweck verwendet. Die Funktionen dieser Anschlsse werden
durch Programmierung konfiguriert. Wenn externe Ausstattung mit dem 20-Pin-Anschluss
(J902) angeschlossen wird, ist ein geeigneter Pegelkonverter erforderlich.
Die Verwendung ist von der Einstellung im Native Programmer abhngig, der
im Programmierhandbuch (Artikelnr. 6866539D46) beschrieben ist.
Analoge Schnittstelle
Fr die externe Schnittstelle verfgt J902 (neben der seriellen Kommunikation) ber eine analoge
Schnittstelle:
Konsolen-Schnittstelle
Audio-Schaltkreis
Der Audio-Schaltkreis umfasst den Empfangs-Audio- und den Sende-Audio-Schaltkreis.
Empfangslautsprecher
Das empfangene Signal, das beim linearen CODEC im AFE in ein Analogsignal umgewandelt wird,
wird durch den linearen CODEC in der Lautstrke geregelt und durch den OP-Verstrker (IC802)
verstrkt.
Das Betriebstonsignal wird durch den SOC generiert und vom OP-Verstrker (IC802) verstrkt.
Die Tonlautstrke wird dann durch das Potentiometer (IC803) und den OP-Verstrker (IC802)
eingestellt und vom OP-Verstrker (IC802) mit dem Empfangssignal gemischt.
Handset-Schaltkreis
Das mit feststehender Lautstrke empfangene Audio-Signal wird durch das AFE ausgegeben
und vom OP-Verstrker (IC801) verstrkt. Das mit variabler Lautstrkeregelung empfangene
Audio-Signal wird ber den Audio-Schalter (IC806) beim OP-Verstrker (IC801) gemischt. Der
Betriebston wird ber den Audioschalter (IC804) in (IC801) gemischt. SOC steuert die Auswahl
dieser Signale.
Diese Signale sind mit dem Mikrofonanschluss auf der Tasten-/Anzeige-Einheit und dem
Schnittstellenanschluss (J902) auf der Rckseite der Haupteinheit verbunden.
Sende-Audio-Signal
TX-Audio, Ext. Mic der externen analogen Schnittstelle und das Mikrofonsignal der Tasten-/
Anzeige-Einheit werden vom Audio-Schalter (IC806) ausgewhlt. SOC whlt diese Signale aus.
Die Lautstrke des ausgewhlten Signals wird von (IC802) eingestellt und an den linearen CODEC
im AFE geleitet.
Leistungsversorgungsschaltkreis
Die Gleichstromquelle fr das Funkgert wird am Gleichstromanschluss (J851) auf der
Rckseite der Haupteinheit angeschlossen. Der Gleichstrom wird in den nicht geschalteten
und den geschalteten Weg unterteilt.
Der nicht geschaltete Weg ist mit den Spannungsreglern (IC851 und IC852) verbunden.
Die Spannungsregler liefern den Gleichstrom fr den Backup-Speicher.
Der geschaltete Weg ist mit dem FET-Schalter (TR851) verbunden. Dieser FET-Schalter wird durch
das Steuersignal EIN/AUS geschaltet, das durch den Encoder auf der Tasten-/Anzeige-Einheit oder
dem externen Gert aktiviert wird. Das Ein-/Aus-Steuersignal wird ber den Transistor (TR852
bis TR855) zum Gate des FET geleitet. Der geschaltete Strom wird SWA+ genannt. Dieser Strom
wird mit den nachfolgenden Spannungsregler verbunden.
IC853 und der Peripherieschaltkreis bestehen aus DC/DC-Wandler und erzeugen 3,3 V. Dieser
Strom wird fr den digitalen Schaltkreis sowie den SOC verwendet. Auerdem ist dieser Strom
mit den nachfolgenden Spannungsregler zur Generierung einer niedrigeren Spannung verbunden.
IC854 generiert 1,8 V (1,8 VC), IC855 generiert 2,5 V (2,5 VID) und IC856 generiert 2,5 V (2,5 VIA).
Die Regler schalten sich in der Reihenfolge 2,5 VIA, 2,5 VID und 1,8 VC ein. IC857 generiert
1,8 V (1,8 VI).
SIM-Schnittstelle
Es wird eine GSM-SIM-Karte verwendet. Die SIM-Karte wird in den SIM-Kartenanschluss
(J801) eingelegt.
GPS
Der GPS-Empfnger (IC611) wird zum Empfang von GPS-Signalen verwendet. Die externe
GPS-Antenne wird an den GPS-Antennenanschluss auf der Rckseite der Haupteinheit
angeschlossen. Das GPS-Signal von der GPX-Antenne wird ber den RF-Anschluss (J605)
mit dem GPS-Empfnger verbunden.
Der GPS-Empfnger wird ber den seriellen Schnittstellenschaltkreis (IC612) mit dem SOC
verbunden. Das vom Empfnger empfangene GPS-Signal oder das Steuersignal vom SOC
werden durch die serielle Schnittstelle bertragen.
UCM
Die Haupteinheit verfgt ber einen UCM-Anschluss (J903). Dies ist die serielle Schnittstelle
zum SOC.
Funkschaltkreis
Das vom Antennenschalter empfangene Signal wird zum Zweikreis-Bandpassfilter geleitet, wo ein
ungewnschtes Signal vom Filter ausgefiltert wird. Dieser Filter ist ein spannungsgesteuerter
abstimmbarer Filter.
Die Steuerspannung wird ber den Pufferverstrker (IC471) zum Filter geleitet.
Das Ausgangssignal vom Filter wird durch den Hochfrequenzverstrker (TR401) verstrkt und zum
Abschwcherschaltkreis (IC402 ad IC403) geleitet. Dieser Abschwcher wird verwendet, um den
dynamsichen Bereich des Empfngers zu erweitern und wird gem der empfangenen Signalstrke
geschaltet. Das Abschwcher-Steuersignal wird ber den Transistor (TR470) und den Schaltkreis
(IC472) zum Abschwcher geleitet.
Das Ausgangssignal vom Abschwcher wird durch den zweiten Zweikreis-Bandpassfilter gefiltert
und zum ersten Mischer (TR402) geleitet. Dieser Bandpassfilter wird ebenfalls durch die
Steuerspannung abgestimmt.
Der erste Mischer ist ein N-Kanal-MOS-FET mit zwei Gates. Das empfangene Signal wird zu Gate 1
geleitet und das lokale Signal wird zu Gate 2 des FET geleitet.
Das empfangene Signal wird zum ersten Zwischenfrequenzsignal (ZF-Signal) umgewandelt. Das
umgewandelte erste ZF-Signal hat 73,9 MHz und wird zum ersten Zwischenfrequenz-Schaltkreis
(ZF-Schaltkreis) geleitet.
Der Zwischenfrequenz-Schaltkreis besteht aus dem zweiten Mischer und dem AGC-Verstrker.
Das empfangene Signal vom ersten Zwischenfrequenzfilter und das zweite lokale Signal vom PLL-
Frequenzsynthesizer werden zum Eingang des zweiten Mischers im Zwischenfrequenz-Schaltkreis
geleitet. Das erste Zwischenfrequenzsignal wird dann in das zweite Zwischenfrequenzsignal mit
450 kHz umgewandelt. Das Signal vom zweiten Mischer wird durch den 450 kHz-Keramikfilter mit
dem AGC-Verstrker verbunden.
Der Steuerschaltkreis bestimmt den Verstrkungsfaktor des AGC-Verstrkers und generiert die
vom DAU bentigte DC-Spannung, die ber den Pufferverstrker (IC471) zum AGC-Verstrker
geliefert wird.
Der erste lokale PLL-Synthesizer besteht aus dem PLL-Schaltkreis (IC501), dem Schleifenfilter,
VCO (HC501) und Peripherieschaltkreis. Um die TETRA TDMA-Burst-Signalerzeugung mit
Hochgeschwindigkeit zu realisieren, wird ein Fraktional-N-Synthesizer verwendet.
Das erste lokale Signal wird zum ersten Mischer (TR402) im Empfngerschaltkreis und zum
Sendemischer (CD1002) geleitet.
Der zweite lokale PLL-Synthesizer besteht aus dem PLL IC (IC1001), Schleifenfilter, VCO
(TR1001), Puffertransistor (TR1003 und TR1004) und Peripherieschaltkreis.
BERSICHT CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 19
Das Ausgangssignal von VCO (TR1001) wird durch den Verstrker (TR1003 und TR1004) verstrkt.
Dieses Signal wird in 2 geteilt, ein Signal wird zum PLL-Schaltkreis rckgekoppelt. Das andere Signal
wird durch den Pufferverstrker (TR1004) zum Empfngermischer und Sendermischer geleitet.
Dieser PLL generiert die konstante Frequenz im Empfner (RX) und Sender (TX).
Das Ausgangssignal des zweiten PLL wird zum zweiten Mischer im ZF-Schaltkreis (IC470) und zum
Sendemischer geleitet.
Das erste lokale Signal wird durch den Pufferverstrker (IC507 und TR1005) verstrkt und zum
Sendemischer (CD1002) geleitet.
Der Sendemischer (CD1002) mischt das erste und zweite lokale Signal, um das Sendesignal
zu generieren. Es wird ein hochlinearer, doppelt abgestimmter Mischer verwendet.
Das gemischte Signal wird zu den zwei Stufen des Bandpassfilters und zum Pufferverstrker geleitet.
Der Ausgang des Mischers wrid durch den ersten Bandpassfilter gefiltert. Die Mittenfrequenz des
Filters wird durch die Abstimmungsspannung vom Steuerschaltkreis gesteuert. Die Steuerspannung
wird durch den DAU (IC701) generiert und ber den Pufferverstrker (IC1002) zum Filter geleitet.
Der Ausgang des Bandpassfilters wird vom Pufferverstrker (IC2001) verstrkt und zum
zweiten Bandpassfilter geleitet. Der zweite Bandpassfilter ist wie der erste Filter ebenfalls
ein abstimmbarer Filter.
Das Ausgangssignal des zweiten Bandpassfilters wird in 2 geteilt und ber den Pufferverstrker
(IC510 und IC511) zum Quadratur-Modulator und Quadratur-Demodulator in der kartesischen
Rckkopplungsschleife geleitet.
Das Trgersignal wird als pi/4 DQPSK-Signal durch das I- und Q-Signal moduliert. Das modulierte
Signal wird durch den Pufferverstrker (TR301) auf den geeigneten Pegel verstrkt, um den
Leistungsverstrker anzusteuern.
Der Ausgang des Pufferverstrkers wird zum variablen Dmpfer (CD301) geleitet. Der variable
Dmpfer wird durch den Digitalsignalverarbeitungs-Schaltkreis gesteuert, um einen geeigneten
Pegel auszugeben.
Sender-Leistungsverstrker
Das modulierte Signal wird zum PA-Hybrid-Schaltkreis (HC201) geleitet. Der Hybridschaltkreis
besteht aus einem dreistufigen Verstrker. An der Endstufe wird ein hochpegeliger FET zur
Realisierung der Hochlinearitt verwendet.
Die Gate-Vorspannung fr das PA-Modul wird durch den Steuerschaltkreis gesteuert und ber den
Pufferverstrker (IC202) an die PA-Stufe geleitet.
Der Ausgang der PA-Stufe wird vom Richtkuppler (CD202) aufgefangen und zum Linearisierer geleitet.
Das Sendesignal, das den Antennenschalter passiert hat, wird zum Tiefpassfilter (FL201) geleitet,
um das Strsignal herauszufiltern. Das Ausgangssignal des Tiefpassfilters wird zum BNC-
Anschluss (J201) geleitet.
BERSICHT CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 21
Das Sendesignal, das vom Kuppler aufgefangen wird, wird vom variablen Dmpfer (CD303)
abgedmpft und zum Quadratur-Demodulator (IC308) geleitet. Der Ausgang des Quadratur-
Demodulators wird zum ADU des Steuerschaltkreises und zum Komparator geleitet. Der
Steuerschaltkreis berechnet die Phasen- und Amplitudendifferenz zwischen dem modulierten und
demodulierten Signal. Der Amplitudenabgleich wird werksseitig eingestellt.
Die Phasendifferenz wird dynamisch durch den Phasenschieber (IC319) angepasst, um die Phase
des Quadratur-Demodulators einzustellen.
Die Ausgangsspannung des DAU (IC702) wird gesteuert und diese Spannung steuert ber den
Pufferverstrker (IC 318) die Phase des getragenen Signals.
Die DC-Abweichung des demodulierten I- und Q-Signals wird durch Hinzufgen der DC-Spannung
vom DAU (1C702) beim Addierschaltkreis (IC 318) korrigiert. Jedes I- und Q-Signal wird zum
Komparator geleitet und mit dem Referenzmodulationssignal verglichen.
Der Sendesignalpegel wird durch Betrieb des Vorwrtsdmpfers (CD301) und des
Rckwrtsdmpfers (CD303) komplementr gesteuert.
Diese Dmpfer sollten je nach Sendeleistungspegel gesteuert werden. Die Ausgangsspannung des
DAU (IC702) wird gendert und diese Spannung wird zum Pufferverstrker (IC307) und Dmpfer
(CD301) geleitet. Dann wird der Ausgangspegel des Dmpfers (CD301) gendert und der
Eingangspegel des Leistungsverstrkers gendert.
Aufgrund der Sendepegelnderung wird das vom Kuppler aufgefangene Signal fr den Quadratur-
Demodulator gendert. Um den Eingangspegel des Demodulators zu erhalten, sollte die Dmpfung
des Rckwrtsdmpfers (CD303) gendert werden. Der DAU (IC702) generiert die Steuerspannung
fr den Rckwrtsdmpfer, um den Eingangspegel des Quadratur-Demodulators zu erhalten.
22 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch BERSICHT
Netzteil
Der Spannungsregler des Hochfrequenzschaltkreises ist ein Regler mit Abfallverzgerung. Der DC-
Strom ber den Stromschalter wird zum 9-V-Reglerschaltkreis (IC206) geleitet. Diese Spannung
wird fr den Sendeschaltkreis verwendet.
Der 5-V-Spannungsregler (IC207) liefert den 5-V-Strom fr den PLL-Schaltkreis. Diese Spannung
wird auerdem vom Transistor (TR204) geschaltet und zum PLL-Schaltkreis geleitet.
Der 5-V-Spannungsregler (IC208) liefert den 5-V-Strom fr den Sender- und Empfnger-
Schaltkreis. Diese Spannung wird auerdem vom Transistor (TR206) geschaltet und zum
Empfnger-Schaltkreis geleitet.
Die CPU beinhaltet Flash-ROM, SDRAM-Schnittstelle, ADU, DAU, LCD-Controller und die serielle
Kommunikationsschnittstelle.
Der Flash-ROM (IC003) speichert den Quellcode, Schriftdaten und Bitmap-Daten. Der SDRAM
(IC002) ist der Arbeitsbereich.
Die Konsolen-CPU kommuniziert mit der Haupt-CPU ber den Pufferschaltkreis (IC008). Die
serielle Kommunikation erfolgt mit einer Baudrate von 115,2 KB/s, mit 8 Bits, ohne Paritt und
einem 0 V-/3,3 V-Pegel.
Der Treiberschaltkreis der weien LED (IC106) steuert die Intensitt der LED fr die Anzeige-
Hintergrundbeleuchtung.
Die Intensitt wird durch die Ausgangsspannung des DAU in der CPU gesteuert.
Die CPU oszilliert die Taktfrequenz mit Kristall (X001) und multipliziert sie intern mit 8.
Der Kern der CPU wird bei 115,2 MHz betrieben, der Bus-Takt bei 57,6 MHz und der
Peripherieblock bei 28,8 MHz.
Schnittstelle
Der Anschluss (J006) verbindet Tasten-/Anzeige-Einheit und Haupteinheit.
Taste
Die Tasten werden durch den Metal-Dome-Kontakt (SW101 bis SW124) ein- und ausgeschaltet.
SW101 bis SW114 und SW116 bis SW124 werden von der Tastenmatrix abgetastet. Die Notruftaste
SW115 ist ein unabhngiger Eingangskontakt.
Netzschalter
Netzschalter und Lautstrkeregler werden mit dem Drehknopf (SW001) bettigt.
BERSICHT CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 25
Durch Drcken des Drehknopfs wird das Funkgert eingeschaltet. Durch Drehen des Drehknopfs
wird die Lautstrke geregelt und das Bildschirm-Men ausgewhlt.
Neben dem Drcken des Drehknopfes wird das Funkgert auch durch Drcken der Notruftaste
eingeschaltet. In diesem Fall wird ein Notruf gestartet, sobald das Funkgert eingeschaltet ist.
Anzeige
Die Anzeige ist ein 2,8 Zoll STN-Farb-LCD-Modul (DD001), 240 RGB x 160 Punkte.
Das Steuersignal von der Konsolen-CPU ist mit der LCD-Einheit ber den LCD-
Schnittstellenanschluss (J102) verbunden.
Die Hintergrundbeleuchtung der LCD-Anzeige erfolgt durch die interne weie Hintergrund-LED im
LCD-Modul. Die Intensitt der LCD-Hintergrundbeleuchtung wird von der Ausgangsspannung der
Hintergrundbeleuchtungs-Stromversorgung (IC106) sowie durch die Ausgangsspannung des DAU
der CPU gesteuert.
Anzeige-LED
Die zweifarbige Anzeige-LED (CD102) zeigt den Status des Funkgerts an. Die Konsolen-CPU
steuert ber den Transistor (TR101 and TR102) die rote, grne oder gelbe Farbe der LED.
Anschluss
Das Mikrofon wird mit der Tasten-/Anzeige-Einheit ber den RJ-45-Anschluss (J005) verbunden.
Audio-Schaltkreis
Das an den Anschluss (J005) geleitete Mikrofonsignal wird durch den Mikrofonverstrker (JC107)
verstrkt und ber den Schnittstellenanschluss (J006) zur Haupteinheit geleitet.
Das Empfangssignal fr das Handset wird durch den Audio-Verstrker (IC107) verstrkt und an den
Mikrofonanschluss geleitet.
Leistungsversorgungsschaltkreis
Die Leistungsversorgung fr die Tasten-/Anzeige-Einheit wandelt die 9 V DC von der Haupteinheit
um, um die Spannungsversorgung fr die Tasten-/Anzeige-Einheit zu generieren.
Die Spannung von 9 V wird zum Audio-Schaltkreis, zur Anzeige-LED und zur LED-
Hintergrundbeleuchtung geleitet.
Die Spannung von 5 V wird durch den Spannungsregler-Schaltkreis (IC102) erzeugt und an die
Hintergrundbeleuchtung die LCD-Anzeige geleitet.
Die Spannung von 3,3 V wird durch den Spannungsregler-Schaltkreis (IC103) erzeugt und an die
CPU, das LCD-Modul und andere digitale Schaltkreise geleitet.
26 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch BERSICHT
Die Spannung von 1,5 V wird durch den Spannungsregler-Schaltkreis (IC105) erzeugt und an den
CPU-Kern geleitet.
Die Spannung von 1,5 V wird nach dem Einschalten des 3,3-V-Reglers eingeschaltet.
Der Reset-Schaltkreis (IC108) erzeugt bei eingeschaltetem Funkgert das Reset-Signal und setzt
die CPU zurck.
KAPITEL 4
TESTAUFBAU UND EINSTELLUNGEN
Typische Testeinstellungen
SCHRITT 1
Stellen Sie fr die Gleichstromquelle eine Spannung von 13,2 V ein. (Es ist eine Gleichstromquelle
mit einer Kapazitt von mehr als 5 A erforderlich.)
SCHRITT 2
Verbinden Sie das Funkgert fr die Einstellungen mit der Gleichstromquelle. (Das Funkgert sollte
zu diesem Zeitpunkt noch ausgeschaltet sein.)
SCHRITT 3
Verbinden Sie den Antennenanschluss des Funkgerts mit dem RF-Anschluss des TETRA-
Testgerts von AEROFLEX Typ 2968.
SCHRITT 4
Drcken Sie gleichzeitig die Mentaste, die Taste [2] des numerischen Tastenfelds und den
Drehknopf. Das Funkgert wechselt in den JRC TEST-Modus.
Selbsttest
Wenn das Funkgert eingeschaltet wird, wird automatisch ein Selbsttestprogramm gestartet.
Wenn keine Fehler auftreten, sind alle Segmente auf der Anzeige auf der Vorderseite eingeschaltet.
Ein kurzer Signalton zeigt an, dass der Selbsttest ohne Fehler ausgefhrt wurde.
Nach dem Test zeigt das Funkgert etwa 1 Sekunde seine ID an und schaltet dann in den normalen
Betriebsmodus um.
Fehlermeldungen
Wenn das Funkgert den Selbsttest nicht fehlerfrei durchfhren kann, wird eine Fehlermeldung
auf der Anzeige angezeigt und ein Warnsignal ertnt.
Tabelle 2. Fehlermeldungen
Fehlermeldung Beschreibung
(siehe
IFR2968-
Frequenz Position 2
Einstellung
IFR2968- und 3)
Funkkanal Leistungseinstellung
Kanal
Normal/
TX RX Band
Reverse
SCHRITT 1
Stellen Sie fr IFR in den Systemparametern die folgenden Parameter ein:
(MAX TX LEVEL) auf 40 dBm
SCHRITT 2
RF Gen Level
-112 dBm
SCHRITT 3
Channel Plan
Einstellung auf USER DEFINED
SCHRITT 4
Einstellung Channel Block im Men User Defined
i) Whlen Sie CHANNEL BLOCK 1 aus und stellen Sie folgende Parameter ein:
CHANNEL BLOCK EXCLUDED
LOWEST CHANNEL 0000
HIGHEST CHANNEL 4095
LOWEST CHANNEL TX FREQUENCY 290,0125 MHz
DUPLEXT OFFSET 10 MHz
CHANNEL SPACING 25 kHz
ii) Whlen Sie CHANNEL BLOCK 2 aus und stellen Sie folgende Parameter ein:
CHANNEL BLOCK EXCLUDED
LOWEST CHANNEL 0000
HIGHEST CHANNEL 4095
LOWEST CHANNEL TX FREQUENCY 310,0125 MHz
DUPLEXT OFFSET -10 MHz
CHANNEL SPACING 25 kHz
iii) Whlen Sie CHANNEL BLOCK 2 aus und stellen Sie folgende Parameter ein:
CHANNEL BLOCK EXCLUDED
LOWEST CHANNEL 0000
HIGHEST CHANNEL 4095
LOWEST CHANNEL TX FREQUENCY 390,0125 MHz
DUPLEXT OFFSET 10 MHz
CHANNEL SPACING 25 kHz
iv) Whlen Sie CHANNEL BLOCK 2 aus und stellen Sie folgende Parameter ein:
CHANNEL BLOCK EXCLUDED
LOWEST CHANNEL 0000
HIGHEST CHANNEL 4095
LOWEST CHANNEL TX FREQUENCY 410,0125 MHz
DUPLEXT OFFSET -10 MHz
CHANNEL SPACING 25 kHz
A) Normaleinstellung:
SCHRITT 4
i) Drcken Sie die Taste USER DEFINED und stellen Sie die folgenden Parameter ein:
FREQ BAND 3
OFFSET 3
DUPLEX SPACING 0
REVERSE 0
32 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch TESTAUFBAU UND EINSTELLUNGEN
ii) Whlen Sie CHANNEL BLOCK 1 aus und stellen Sie folgende Parameter ein:
CHANNEL BLOCK INCLUDED
Stellen Sie fr weitere Kanalblcke (Channel Block 2, 3, 4) die Option EXCLUDED ein.
B) Reverse-Einstellung:
SCHRITT 4
i) Drcken Sie die Taste USER DEFINED und stellen Sie die folgenden Parameter ein:
FREQ BAND 3
OFFSET 3
DUPLEX SPACING 0
REVERSE 1
ii) Whlen Sie CHANNEL BLOCK 2 aus und stellen Sie folgende Parameter ein:
CHANNEL BLOCK INCLUDED
Stellen Sie fr weitere Kanalblcke (Channel Block 1, 3, 4) die Option EXCLUDED ein.
A) Normaleinstellung:
SCHRITT 4
i) Drcken Sie die Taste USER DEFINED und stellen Sie die folgenden Parameter ein:
FREQ BAND 4
OFFSET 3
DUPLEX SPACING 0
REVERSE 0
ii) Whlen Sie CHANNEL BLOCK 3 aus und stellen Sie folgende Parameter ein:
CHANNEL BLOCK INCLUDED
Stellen Sie fr weitere Kanalblcke (Channel Block 1, 2, 4) die Option EXCLUDED ein.
B) Reverse-Einstellung:
SCHRITT 4
i) Drcken Sie die Taste USER DEFINED und stellen Sie die folgenden Parameter ein:
FREQ BAND 4
OFFSET 3
DUPLEX SPACING 0
REVERSE 1
ii) Whlen Sie CHANNEL BLOCK 4 aus und stellen Sie folgende Parameter ein:
CHANNEL BLOCK INCLUDED
Stellen Sie fr weitere Kanalblcke (Channel Block 1, 2, 3) die Option EXCLUDED ein.
TESTAUFBAU UND EINSTELLUNGEN CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 33
RX VCO-Frequenzeinstellung
Vorbereitung
Drcken Sie gleichzeitig die Men-Taste, die Taste [2] des numerischen Tastenfelds und den
Drehknopf.
SCHRITT 1
Stellen Sie mit Hilfe der numerischen Tasten den Kanal 3200 ein und besttigen Sie die Einstellung.
SCHRITT 2
Prfen Sie die Spannung des Testpunkts TP640. Die normale Spannung ist hher als 2 V.
Wenn die Spannung ausserhalb des angegebenen Bereichs liegt, bedeutet dies, dass der VCO
entsperrt ist.
SCHRITT 3
Durch Drcken von # wird fr den 1. lokalen VCO die Einstellung PLL1 auf PLL2 gesetzt.
SCHRITT 4
Prfen Sie die Spannung beim Testpunkt TP642. Die normale Spannung ist hher als 2 V. Wenn die
Spannung ausserhalb des angegebenen Bereichs liegt, bedeutet dies, dass der VCO entsperrt ist.
SCHRITT 1
Stellen Sie mit Hilfe der numerischen Tasten den Kanal 3200 ein und besttigen Sie die Einstellung.
SCHRITT 2
Prfen Sie die Spannung von Testpunkt TP644 mit Hilfe eines digitalen Spannungsmessgerts mit
hoher Impedanz.
Die normale Spannung am Testpunkt TP644 ist hher als 2 V.
Wenn die Spannung ausserhalb des angegebenen Bereichs liegt, bedeutet dies, dass der VCO
entsperrt ist.
34 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch TESTAUFBAU UND EINSTELLUNGEN
Vorbereitung
Vorbereiten des AEROFLEX-Testers 2968
SCHRITT 1
Stellen Sie wie im Folgenden angegeben fr den AEROFLEX-Tester den Modus T1 LOOP BACK
MODE ein:
T1 Loop Back ON
Burst Mode Normal
Signal format TCH/7.2
RF Level -110 dBm
SCHRITT 2
Stellen Sie den Kanal des AEROFLEX-Testers auf 3200.
SCHRITT 3
Drcken Sie gleichzeitig die Men-Taste, die Taste [2] des numerischen Tastenfelds und den
Drehknopf. Das Funkgert wechselt in den Modus T1 TEST.
SCHRITT 4
Stellen Sie fr den Kanal des getesteten Funkgerts 3200 ein.
SCHRITT 5
Drcken Sie die Taste [*] fr eine Abweichung um 12,5 kHz. CM5000 zeigt ein + rechts neben der
Kanalnummer an.
SCHRITT 1
Besttigen Sie, dass die Test-Anzeige BER weniger als 1 % ist.
TESTAUFBAU UND EINSTELLUNGEN CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 35
Die Einstellung der Sendeleitung ist nach einer Reparatur am Senderschaltkreis erforderlich.
Vorbereitung
SCHRITT 1
Das Testverbindungsdiagramm wird in Abbildung 11 gezeigt.
SCHRITT 2
Drcken Sie gleichzeitig die Men-Taste, die Taste [9] des numerischen Tastenfelds und den
Drehknopf.
SCHRITT 3
Drcken Sie, whrend das Balkendiagramm auf der Anzeige angezeigt wird, gleichzeitig die Tasten
[EMG] und [Left]. Das Funkgert wechselt in den Modus RX ADJUST.
SCHRITT 4
Halten Sie die Mentaste 5 Sekunden lang gedrckt, ohne den Fehlerton zu beachten.
SCHRITT 5
Stellen Sie mit Hilfe der numerischen Tasten den Kanal 3600 ein.
SCHRITT 6
Besttigen Sie die Frequenz als 390,0125 MHz.
SCHRITT 7
Drcken Sie die Taste [BST] auf dem Bedienteil.
Das Funkgert wechselt in den Modus TX ADJUST.
Einstellung
Kanal einstellen
SCHRITT 1
Stellen Sie mit Hilfe der numerischen Tasten den Kanal 3600 ein.
SCHRITT 2
Stellen Sie fr IFR2968 die Einstellung A Band Normal ein.
SCHRITT 1
Drcken Sie die Taste [BST] auf dem Bedienteil.
Das Funkgert wechselt in den Modus TX ADJUST.
SCHRITT 2
Besttigen Sie die Display-Anzeige CH3600 380,0125 MH.
SCHRITT 3
Besttigen Sie die Display-Anzeige POWER 37 dBm.
36 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch TESTAUFBAU UND EINSTELLUNGEN
SCHRITT 4
Besttigen Sie, dass LT ausgewhlt ist.
SCHRITT 5
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +37+/-0,5 dBm ein.
SCHRITT 6
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
SCHRITT 7
Drcken Sie die Navigationstaste [Up], um FB auszuwhlen.
SCHRITT 8
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +37+/-0,5 dBm ein.
SCHRITT 9
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
SCHRITT 10
Drcken Sie die Navigationstaste [Left] und besttigen Sie die Display-Anzeige POWER 35 dBm.
SCHRITT 11
Besttigen Sie, dass LT ausgewhlt ist.
SCHRITT 12
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +35+/-0,5 dBm ein.
SCHRITT 13
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
SCHRITT 14
Drcken Sie die Navigationstaste [Up], um FB auszuwhlen.
SCHRITT 15
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +35+/-0,5 dBm ein.
SCHRITT 16
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
SCHRITT 17
Drcken Sie die Navigationstaste [Left] und besttigen Sie die Display-Anzeige POWER 30 dBm.
SCHRITT 18
Besttigen Sie, dass LT ausgewhlt ist.
SCHRITT 19
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +30+/-0,5 dBm ein.
SCHRITT 20
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
SCHRITT 21
Drcken Sie die Navigationstaste [Up], um FB auszuwhlen.
SCHRITT 22
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +30+/-0,5 dBm ein.
SCHRITT 23
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
TESTAUFBAU UND EINSTELLUNGEN CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 37
SCHRITT 24
Drcken Sie die Navigationstaste [Left] und besttigen Sie die Display-Anzeige POWER 25 dBm.
SCHRITT 25
Besttigen Sie, dass LT ausgewhlt ist.
SCHRITT 26
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +25+/-0,5 dBm ein.
SCHRITT 27
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
SCHRITT 28
Drcken Sie die Navigationstaste [Up], um FB auszuwhlen.
SCHRITT 29
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +25+/-0,5 dBm ein.
SCHRITT 30
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
SCHRITT 31
Drcken Sie die Navigationstaste [Left] und besttigen Sie die Display-Anzeige POWER 20 dBm.
SCHRITT 32
Besttigen Sie, dass LT ausgewhlt ist.
SCHRITT 33
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +20+/-0,5 dBm ein.
SCHRITT 34
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
SCHRITT 35
Drcken Sie die Navigationstaste [Up], um FB auszuwhlen.
SCHRITT 36
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +20+/-0,5 dBm ein.
SCHRITT 37
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
SCHRITT 38
Drcken Sie die Navigationstaste [Left] und besttigen Sie die Display-Anzeige POWER 15 dBm.
SCHRITT 39
Besttigen Sie, dass LT ausgewhlt ist.
SCHRITT 40
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +15+/-0,5 dBm ein.
SCHRITT 41
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
SCHRITT 42
Drcken Sie die Navigationstaste [Up], um FB auszuwhlen. FB sollte durch schwarzen
Hintergrund markiert sein.
SCHRITT 43
Stellen Sie fr die Ausgangsleistung mit Hilfe des Drehknopfs den Wert +15+/-0,5 dBm ein.
38 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch TESTAUFBAU UND EINSTELLUNGEN
SCHRITT 44
Drcken Sie die Navigationstaste [Right] fr weitere Einstellungen.
SCHRITT 45
Halten Sie nach dem Beenden der Stromeinstellung die Enter-Taste 1 Sekunde lang gedrckt.
Die Meldung MEMORY wird auf der Anzeige angezeigt und ein akkustisches Signal ausgegeben.
SCHRITT 46
Drcken Sie [RX], um das Senden zu beenden.
Kanal einstellen
SCHRITT 1
Stellen Sie mit Hilfe der numerischen Tasten den Kanal 4000 ein.
SCHRITT 2
Stellen Sie fr IFR2968 die Einstellung A Band Normal ein.
Kanal einstellen
SCHRITT 1
Stellen Sie mit Hilfe der numerischen Tasten den Kanal 4400 (IFR 0400) ein.
SCHRITT 2
Stellen Sie fr IFR2968 die Einstellung B Band Normal ein.
Kanal einstellen
SCHRITT 1
Stellen Sie mit Hilfe der numerischen Tasten den Kanal 4800 (IFR 0800) ein.
SCHRITT 2
Stellen Sie fr IFR2968 die Einstellung B Band Normal ein.
Kanal einstellen
SCHRITT 1
Stellen Sie mit Hilfe der numerischen Tasten den Kanal 5200 (IFR 1200) ein.
SCHRITT 2
Stellen Sie fr IFR2968 die Einstellung B Band Normal ein.
Kanal einstellen
SCHRITT 1
Stellen Sie mit Hilfe der numerischen Tasten den Kanal 5600 (IFR 1600) ein.
SCHRITT 2
Stellen Sie fr IFR2968 die Einstellung B Band Normal ein.
Leistungseinstellung speichern
Um die Leistungseinstellungen zu speichern, schalten Sie das Funkgert durch Drcken der Taste
[PWR] aus.
40 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch TESTAUFBAU UND EINSTELLUNGEN
Empfngereinstellung
Vorbereitung
SCHRITT 1
Stellen Sie fr IFR2968 die Einstellung B Band Normal ein.
SCHRITT 2
Geben Sie fr IFR2986 folgende Einstellungen an:
Channel 0200
RF Level -70 dBm
SCHRITT 3
Drcken Sie gleichzeitig die Men-Taste, die Taste [9] des numerischen Tastenfelds und den
Drehknopf.
SCHRITT 4
Drcken Sie, whrend das Balkendiagramm auf der Anzeige angezeigt wird, gleichzeitig die Tasten
[EMG] und [Left]. Das Funkgert wechselt in den Modus RX ADJUST.
SCHRITT 5
Halten Sie die Mentaste 5 Sekunden lang gedrckt, ohne den Fehlerton zu beachten.
SCHRITT 6
Stellen Sie mit Hilfe der numerischen Tasten den Kanal 4200 ein.
SCHRITT 7
Besttigen Sie die Frequenz als 405,0125 MHz.
Einstellung
SCHRITT 1
Besttigen Sie die Display-Anzeige STAGE LEVEL HI 1 und warten Sie 10 Sekunden.
SCHRITT 2
Halten Sie die Enter-Taste 1 Sekunde lang gedrckt.
Die Meldung MEMORY wird auf der Anzeige angezeigt und ein akkustisches Signal ausgegeben.
SCHRITT 3
Drcken Sie die Navigationstaste [Up] und besttigen Sie die Display-Anzeige STAGE LEVEL HI 2.
SCHRITT 4
Warten Sie 5 Sekunden. Halten Sie dann die Enter-Taste 1 Sekunde lang gedrckt.
Die Meldung MEMORY wird auf der Anzeige angezeigt und ein akkustisches Signal ausgegeben.
SCHRITT 5
Geben Sie fr IFR2986 folgende Einstellung an:
RF Level -90 dBm
SCHRITT 6
Drcken Sie die Navigationstaste und besttigen Sie die Display-Anzeige STAGE LEVEL LOW.
TESTAUFBAU UND EINSTELLUNGEN CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 41
SCHRITT 7
Warten Sie 5 Sekunden. Halten Sie dann die Enter-Taste 1 Sekunde lang gedrckt.
Die Meldung MEMORY wird auf der Anzeige angezeigt und ein akkustisches Signal ausgegeben.
SCHRITT 8
Drcken Sie die Navigationstaste [Up] und besttigen Sie die Display-Anzeige RSSI CHECK.
SCHRITT 9
Besttigen Sie, dass RSSI sich innerhalb von 90 +/- 2 dBm befindet.
SCHRITT 10
Stellen Sie fr IFR2968 RF LEVEL den Wert -70 dBm ein.
SCHRITT 11
Besttigen Sie, dass RSSI sich innerhalb von 70 +/- 2 dBm befindet.
SCHRITT 12
Schalten Sie das Funkgert durch Drcken des Drehknopfs aus.
42 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch ANSCHLUSSPINBELEGUNG
KAPITEL 5
ANSCHLUSSPINBELEGUNG
Anschlsse
Mikrofonanschluss
Zubehranschlsse
Antennenanschluss
GPS-Antennenanschluss
Netzanschluss
ANSCHLUSSPINBELEGUNG CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 43
Mikrofonanschluss (Konsole)
Diese Anschluss ermglicht ber den 10-Pin-RJ-Stecker die Kommunikation mit dem
Handmikrofon, Handset und Tischmikrofon.
Tabelle 4. Mikrofonanschlusspins
1 Keine Verbindung
2 Keine Verbindung
4 Masse Masse
7 Keine Verbindung
Zubehranschluss 1
Dieser Anschluss ermglicht ber den 20-Pin-Anschluss die Kommunikation mit dem externen
Lautsprecher, dem externen Mikrofon, der externen Sprechtaste, dem externen Notrufschalter, dem
externen Alarmschalter des Znderkennungskabels, dem Buzzer und der RS-232-C-Schnittstelle.
14 Eingang Hook-Schalter Signal Hook-Schalter (Hoch = Hook aus, Niedrig = Hook ein)
Zubehranschluss 2
Dieser Anschluss ermglicht ber den 7-Pin-Stecker die Kommunikation mit der RS-232C-
Schnittstelle.
1 GND Masse
2 Keine Verbindung
7 GND Masse
Antennenanschluss
Dieser Anschluss ermglicht den Anschluss an eine RF-Antenne mit 380 430 MHz.
Tabelle 7. Antennenanschluss
Element Spezifikation
Steckertyp BNC-Stecker
Impedanz 50 Ohm
46 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch ANSCHLUSSPINBELEGUNG
GPS-Antennenanschluss
Tabelle 8. GPS-Antennenanschluss
Element Spezifikation
Steckertyp FME-Stecker
Impedanz 50 Ohm
Netzanschluss
Dieser Anschluss stellt ber das Netzkabel die Verbindung zur Autobatterie oder zum Netzteil her.
Tabelle 9. Netzanschluss
Element Spezifikation
Steckertyp 2-Pin-Spezialstecker
Spannung 13,2 V
CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 47
KAPITEL 6
ERSATZTEILLISTE UND ZEICHNUNGEN
Ersatzteilliste
Element Artikelnummer
Gehuse Bedienteil
Lautstrkeregler-Baugruppe
LCD
IF3G-Kabel
Ersatzteilliste Zubehr
Element Artikelnummer
Kabel
Zndungskabel HKN9327_
Kontrollstationen
Gleichstrom-Netzkabel GKN6266_
Tischmikrofon RMN5069_
Lautsprecher-Verlngerungskabel GMKN4084_
Telefon-Handset GMUN1006_
Handmikrofon GMMN4063_
Visiermikrofon GMMN4065_
Montage-Baustze
Remote-Montage-Bausatz GMLN4741_
50 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch ERSATZTEILLISTE UND ZEICHNUNGEN
Notruffuschalter RLN4836_
Tischnetzteil GPN6145_
Dualmodus-Schnittstelle GMLN4742_
Anschlussdose
Datenanschlussdose GMLN3002_
Antennen
GPS-Konsolenmontage-Antenne GMAG4251_
GPS-Magnetmontage-Antenne GMAG4252_
Verschiedenes
Zubehranschluss-Bausatz GMBN1021_
Abbildungen
Montage Bedienteil
ERSATZTEILLISTE UND ZEICHNUNGEN CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 51
52 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch ERSATZTEILE UND BAUSTZE
ANHANG A
ERSATZTEILE UND BAUSTZE
Serviceleistungen fr Mobilgerte basieren auf Ersatz; ein fehlerhaftes Teil wird durch
ein funktionierendes Teil ersetzt, wodurch dem Kunden ein schnellerer Service bereitgestellt
werden kann. Wenn beispielsweise die Controller-Platine defekt ist, wird sie ersetzt. Wenn fr
das Mobilgert umfangreichere Tests oder Serviceleistungen erforderlich sind, als auf Feldebene
zur Verfgung stehen, wird es an das European Radio Service Centre gesendet. Dort wird die
Serviceleistung erbracht und das Gert wieder an das regionale Service-Center zurckgesendet.
Wartungsebene 1
Dieses Handbuch ist fr Wartungsleistungen auf Ebene 1 gedacht. Auf Wartungsebene 1 werden
der Transceiver und/oder Zubehr ersetzt und das fehlerhafte Gert und/oder Zubehr an eine
hhere Wartungsebene gesendet. Weitere Informationen finden Sie unter Technischer Support
und Weitere Untersttzung durch Motorola.
CM5000 Mobiltelefone werden werksseitig programmiert. Sie knnen nicht auf Feld-Serviceebene
eingestellt werden.
Wartungsebenen 2 und 3
Wartungsarbeiten der Ebene 2 und 3 knnen nur bei einem Motorola Service-Center vorgenommen
werden. Weitere Informationen erhalten Sie bei Ihrer lokalen Motorola G&PS.
ERSATZTEILE UND BAUSTZE CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 53
Kundendienstinformationen
E-Mail: ESSC@motorola.com
Einzelteile
Einige Ersatzteile und Produktinformationen knnen direkt bestellt werden. Teile mit vollstndiger
Motorola-Artikelnummer sind bei der Motorola Radio Aftermarket and Accessory Division (AAD)
erhltlich. Wenn einem Teil keine Artikelnummer zugewiesen ist, kann dieses in der Regel nicht
bei Motorola erworben werden. Wenn ein Teilesatz nicht in der Liste enthalten ist, sind fr diesen
keine Komponenten erhltlich, die vom Benutzer ausgetauscht werden knnen.
Anfragen zur Identifizierung von nicht aufgefhrten Ersatzteilen richten Sie bitte an die Customer
Care Organization der lokalen Motorola Gebietsvertretung. Bestellungen fr Ersatzteile, Baustze
und Gerte richten Sie bitte direkt an die lokale Vertriebsorganisation von Motorola. Bestellungen
knnen auch ber die Extranet-Site von Motorola Online gettigt werden unter:
https://emeaonline.motorola.com.
EMEA-Support fr Testausrstung
Informationen zu Support- und Serviceleistungen fr Motorola Test Equipment erhalten Sie
durch Anruf beim Motorola Test Equipment Service in Deutschland unter +49 (0) 6128 702179,
Telefax +49 (0) 6128 951046, durch die Customer Care Organization der lokalen Motorola-
Gebietsvertretung oder ber Internet unter: http://www.gd-decisionsystems.com/cte/.
54 CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch ERSATZTEILE UND BAUSTZE
Asien/Pazifikraum
Technischer Support
Zur Untersttzung der Hndler und Wiederverkufer bei eventuellen Fehlfunktionen steht ein
technischer Support zur Verfgung. Sofern mglich, sollte der erste Kontakt telefonisch erfolgen.
Wenn Sie sich an den Technischen Support von Motorola wenden, sollten Sie die Modellnummer
des Produkts sowie die Seriennummer zur Hand haben.
Sie knnen sich auch ber folgende Website an den Helpdesk wenden:
http://www.motorola.com/governmentandenterprise/contactus.
Einzelteile
Einige Ersatzteile und Produktinformationen knnen direkt bestellt werden. Teile mit vollstndiger
Motorola-Artikelnummer sind bei der Motorola Radio Aftermarket and Accessory Division (AAD)
erhltlich. Wenn einem Teil keine Artikelnummer zugewiesen ist, kann dieses in der Regel nicht
bei Motorola erworben werden. Wenn ein Teilesatz nicht in der Liste enthalten ist, sind fr diesen
keine Komponenten erhltlich, die vom Benutzer ausgetauscht werden knnen.
Hinweis zu diesem digitalen TETRA-Mobilfunkgert: Das CPS hat keine Funktion zur Einstellung
des Funkgerts. Einstellungen fr das Funkgert knnen nur werksseitig oder bei einem
geeigneten Motorola-Reparaturzentrum vorgenommen werden. Der Austausch von
Komponenten kann die Funkgerteinstellung beeinflussen und darf nur von einem
geeigneten Motorola-Reparaturzentrum durchgefhrt werden.
Anfragen zur Identifizierung von nicht aufgefhrten Ersatzteilen richten Sie bitte an die Customer
Care Organization der lokalen Motorola Gebietsvertretung. Bestellungen fr Ersatzteile, Baustze
und Gerte richten Sie bitte direkt an die lokale Vertriebsorganisation von Motorola. Bestellungen
knnen auch ber Motorola Online (Extranet) gettigt werden unter.
ERSATZTEILE UND BAUSTZE CM5000 Mobil-Repeater/Gateway Wartungs- und Installationshandbuch 55
Lateinamerika
Lateinamerikanische Servicezentren fr Funkgerte
Der Kundendienst ist ber folgende Servicezentren erreichbar:
Einzelteile:
Wenden Sie sich zur Bestellung von Teilen in Lateinamerika und der Karibik an Ihren lokalen
Motorola-CGISS-Vertreter.
MOTOROLA, INC.
Lateinamerika
789 International Parkway
Sunrise, FL 33325, USA
USA 954-723-8959
MOTOROLA DE ARGENTINA
Ave. del Libertador 1855
B1638BGE, Vicente Lopez
Buenos Aires, Argentina
5411-4317-5300
MOTOROLA CHILE
Ave. Nueva Tajamar 481
Edif. World Trade Center
Of. 1702, Torre Norte
Las Condes
Santiago, Chile
562-338-9000
Technischer Support:
https://businessonline.motorola.com, besuchen Sie fr Anfragen an den technischen Support die
Seite Contact Us.
Einige Ersatzteile und Produktinformationen knnen direkt bestellt werden. Teile mit
vollstndiger Motorola-Artikelnummer sind bei Motorola erhltlich. Wenn einem Teil keine
Artikelnummer zugewiesen ist, kann dieses in der Regel nicht bei Motorola erworben werden.
Ein Asterisk (*) weist darauf hin, dass das Teil nur von einer Motorola-Station repariert und gewartet
werden kann. Wenn ein Teilesatz nicht in der Liste enthalten ist, sind fr diesen keine Komponenten
erhltlich, die vom Benutzer ausgetauscht werden knnen.