Академический Документы
Профессиональный Документы
Культура Документы
Assignment -1
Q.1 Determine the resultant internal loadings in the beam at cross sections through
points D and E. Point E is just to the right of the 3-kip load.
National University of Science and Technology
Q.2 The vertical force P acts on the bottom of the plate having a negligible weight.
Determine the shortest distance d to the edge of the plate at which it can be applied so
that it produces no compressive stresses on the plate at section aa. The plate has a
thickness of 10 mm and P acts along the center line of this thickness.
National University of Science and Technology
Q.3 Determine the maximum and minimum normal stress in the bracket at section
aa when the load is applied at x = 300 mm.
National University of Science and Technology
Q4. If the load has a weight of 600 lb, determine the maximum normal stress
developed on the cross section of the supporting member at section aa.Also, plot the
normal stress distribution over the cross section.
National University of Science and Technology
Q5. The bearing pin supports the load of 700 lb. Determine the stress components in
the support member at point A. The support is 0.5 in Thick.
National University of Science and Technology