0 оценок0% нашли этот документ полезным (0 голосов)
5 просмотров2 страницы
A vehicle was traveling at 50 kmph and was stopped within 2.5 seconds after full braking. The document asks to calculate the skid resistance of the vehicle based on this information. It also provides instructions for two other transportation engineering problems - calculating mean speeds from spot speed study data and designing a traffic signal for a crossroad based on traffic volumes and approach speeds.
A vehicle was traveling at 50 kmph and was stopped within 2.5 seconds after full braking. The document asks to calculate the skid resistance of the vehicle based on this information. It also provides instructions for two other transportation engineering problems - calculating mean speeds from spot speed study data and designing a traffic signal for a crossroad based on traffic volumes and approach speeds.
A vehicle was traveling at 50 kmph and was stopped within 2.5 seconds after full braking. The document asks to calculate the skid resistance of the vehicle based on this information. It also provides instructions for two other transportation engineering problems - calculating mean speeds from spot speed study data and designing a traffic signal for a crossroad based on traffic volumes and approach speeds.
KANTIPUR CITY COLLEGE 3 A vehicle traveling at a speed of 50 Kmph
wasstoppedwithin2.5 secs after the full application of brakes.
UNIT TEST Calculate the skid resistance. [5] LEVEL:- B. E. (Civil) III/II SUBJECT:- Transportation Engineering II FULL MARKS:- 25 TIME:- 01:00 hrs. PASS MARKS:- 10
Attempt ALL questions.
1. The following speed data were collected during spot speed
2. On cross roads A and B the heaviest traffic volume
during the design hour are 700 & 400 vehicles. The approach speeds are 60 and 45 Kmph for road A and B respectively. The width of road A is 14 m and that of B is 10m. Design the traffic signal for vehicles only using approximate method. Draw phase diagram also. (Assume suitable data if necessary) [10] KANTIPUR CITY COLLEGE
UNIT TEST 3 A vehicle traveling at a speed of 50 Kmph was stopped within
2.5 secs after the full application of brakes. Calculate the LEVEL:- B. E. (Civil) III/II skid resistance. [5] SUBJECT:- Transportation Engineering II FULL MARKS:- 25 TIME:- 01:00 hrs. PASS MARKS:- 10 .
Attempt ALL questions.
1. The following speed data were collected during spot speed
2. On cross roads A and B the heaviest traffic volume
during the design hour are 700 & 400 vehicles. The approach speeds are 60 and 45 Kmph for road A and B respectively. The width of road A is 14 m and that of B is 10m. Design the traffic signal for vehicles only using approximate method. Draw phase diagram also. (Assume suitable data if necessary) [10]
Digital Filmmaking: The Ultimate Guide to Web Video Production for Beginners and Non-Professionals, Learn Useful Tips and Advice on How You Can Create, Film and Edit Your Videos