Академический Документы
Профессиональный Документы
Культура Документы
Catalog 4260
Revised, February 1999
Instrument Pipe Fittings
WARNING
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users
having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due
to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of
the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its
subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed
by the provisions stated in the Offer of Sale.
Visual Index
Pipe Fittings
HP5ON
FE Hollow Hex Plug
Female Elbow MT page 12
MHLN page 8 Male Tee
Male Hex page 10
Long Nipple
page 5
FVE
Female Elbow 45
MCN page 8 F5OG5
Male Close Straight Thread
FX Reducer/Expander
Nipple Female Cross
page 5 page 13
page 11
SE
Street Elbow
page 8
RA
CP
Adapter GOA
Pipe Cap
page 5 Male SAE
page 11
Straight Thread to Female
NPT Thread
SVE page 13
MHN Street Elbow 45
page 9 PH
Male Hex
Hex Head Plug
Nipple
page 11
page 6
Male
Connector
FT
PHH to SAE Straight Thread
FHC Female Tee
Hollow Hex Plug page 13
Female Hex page 9
page 12
Coupling
page 6
Thread and Tube End
ST Straight Thread Size Charts
RB Street Tee Adapters page 27, 28, 29
Reducing Bushing page 9
page 7
P5ON
Hex Head Plug Engineering Report Heat
page 12 Code Traceability
page 30
ME MBT
Male Elbow Male Branch Tee
page 7 page 10
Features and Technical Data Rolled male threads for extra strength
Parker Instrument Pipe Fittings are precision machined from Straight bodies machined from applicable ASTM bar stock
forgings for elbows, tees and crosses and from bar stock specifications
for straight connectors. They are designed to be used for Shapes machined from close grain forgings
process control and instrumentation connections between Size ranges from 1/16" through 2" NPT
pipe sizes and tube sizes.
Materials 316 Stainless Steel, Brass and Steel. (Other
Features materials by special order)
Quality engineered for instrumentation applications All exposed threads protected to prevent damage
Packaged in sealed, clear plastic shrink wrapped boxes Nomenclature
for cleanliness
Parker Instrument Pipe Fittings part numbers are constructed
Working pressures calculated in accordance with Power from symbols that identify the size and style of the fitting
Piping Code ANSI B31.1 and Refiner Piping Code ANSI and material used.
B31.3.
Example: The part number shown below is for a male hex
All pipe threads are National Pipe Taper (NPT) and exceed nipple for 3/8" NPT male pipe and 1/4" NPT male pipe in
the requirements of ANSI B1.20.1. 316 stainless steel.
Pipe Dimensions R
Pipe Size N.P.T. Pipe Thread R E Ref.
The National Pipe Taper (NPT) thread has a thread flank PITCH
Parker Instrument Pipe Fittings are ordered by part number as listed in this catalog. 4
Size: Pipe thread sizes are designated by the number of sixteenths of an inch. (3/8 NPT pipe=6/16=6)
Thread Type: All pipe threads are National Pipe Taper (NPT) unless otherwise designated.
Straights and Elbows: Call out the largest pipe end first followed by the smaller pipe size. See MHN 1 2
example on page 6.
Tees and Crosses: For tees that are the same pipe sizes on all ends the size designation is as follows:
6-6-6 FT-B would be a 3/8" NPT Female Tee in brass.
A 1/4" NPT Female Cross in 316 SS would be a 4 FX-SS. 3
If a reducing tee or cross were specified, each size must be in sequence. First size the largest run (1 to 2) and then the branch
(3 to 4).
Example: 6-6-6-4 FX-SS
Material: Basic Material Type (B=Brass, SS=316 Stainless Steel, S=Steel)
Special Fittings: If there is any question as to the fitting desired, particularly for special fitting configurations, it is sug-
gested that a customer print be submitted with the fitting request for quote.
Availability: Items priced in current price list 4260 are carried in stock. Price and delivery for non-standard items quoted on
request through the quick response department.
T1 T2
H
W HEX
H1
W HEX
WH
EX
H
H1
W HEX
H H1
R
W HEX
H1 W HEX
R
H1
R
W HEX
W HEX
W HEX
R
W HEX
INTERNAL
HOLLOW HEX
W HEX O RING
D
R
O RING
INTERNAL
HOLLOW HEX
D
R
T2 T1
D
R
T2 T1
O-Ring Seals
All standard O-Rings are Buna-N material 70 Durameter hardness.
For other materials state material after part number. Dimensions for reference only, subject to change.
Visual Index
ISO Fitting Nomenclature ISO Thread/Fractional Sealing Washers
page 15 Tube Connectors
Typical Fastening Threads
page 16 Bonded Seals
BSPP Male
BSPT
(Stainless)
BSP Taper Branch Tee
BSPP Thread Forms page 26
Male Connector (Positionable)
page 17 page 21 page 24
Copper
ISO Conversion Washers/Male
Fittings BSPP Male
BSPT
Connector BSP Taper page 26
page 21 Male Adapter
NPT Male/ page 24
BSP Taper Male
page 18
BSPT
BSP Taper Copper
Female Connector Washers/Female
BSPP Male
page 21 page 26
NPT Male/ Adapter
BSPP Male page 25
page 18
BSPPGC
BSPT
Size Charts
NPT Female/ Gauge Connector BSP Taper page 27, 28, 29
BSP Taper Male page 22 Female Adapter
page 18 page 25
BSPP
Code Traceability
BSPP Male BSP Taper BSPP Female page 30
page 19 Male Elbow Adapter
page 22 page 25
BSP Taper
Female/
NPT Male BSPP Female
page 19 Gauge Adapter
page 26
BSPP Male
BSPP Female/ Elbow (Positionable)
NPT Male page 23
page 19
BSP Taper
BSPT
BSP threads
BSPP Parallel and BSP Taper threads have a thread flank
angle of 55 inclusive.
60 inclusive thread flank angle Pitch measured in inches
BSPP British Standard Pipe Parallel threads for tubes and Truncation of root and crest are flat
fittings where pressure-tight joints are not made on the Taper angle 147'
thread, i.e., a peripheral seal is used.
BSP Taper British Standard Pipe Taper threads for tubes
and fittings where pressure-tight joints are made on the
threads.
(ISO 7/1) BSPT
MAJOR DIA.
PITCH DIA.
MINOR DIA.
FLANK ANGLE
Bonded
Seal
Form B
A metal gasket (usually copper) performs the seal between the face of the body and the face of the female threaded
component. For Form B replace R in P/N with BR.
Copper
Washer
Copper
Copper
Washer
Washer
T1 T2
T1 T2
T1 T2
T1 T2
T1 T2
T1
R
W
T1
1/4 1/4-19 4-4K FBZ 4MSC4K 1.50 .70 1.20 .56 9/16
1/4 3/8-19 4-6K FBZ 4MSC6K 1.52 .70 1.22 .56 11/16
1/4 1/2-14 4-8K FBZ 4MSC8K 1.76 .70 1.44 .75 7/8
A 5/16 1/8-28 5-2K FBZ 5MSC2K 1.34 .73 1.05 .38 9/16
5/16 1/4-19 5-4K FBZ 5MSC4K 1.53 .73 1.23 .56 9/16
C R 3/8 1/8-28 6-2K FBZ 6MSC2K 1.39 .76 1.09 .38 5/8
3/8 1/4-19 6-4K FBZ 6MSC4K 1.59 .76 1.28 .56 5/8
3/8 3/8-19 6-6K FBZ 6MSC6K 1.59 .76 1.28 .56 11/16
BSPT
3/8 1/2-14 6-8K FBZ 6MSC8K 1.82 .76 1.53 .75 7/8
1/2 1/4-19 8-4K FBZ 8MSC4K 1.75 .87 1.31 .56 13/16
1/2 3/8-19 8-6K FBZ 8MSC6K 1.75 .87 1.31 .56 13/16
W
1/2 1/2-14 8-8K FBZ 8MSC8K 1.93 .87 1.53 .75 7/8
D Connects fractional tube to female ISO taper thread.
NOTE: Copper Washer, page 26, for female thread sealing, must be used on BSPP female end shown.
H
L4N
R
O RING
STRAIGHT
THREAD
W L4N O RING
C
L
W HEX
H
L4N R
O RING
1/4 1/4-19 4-4K T2HF 4MA4K 1.49 0.64 1.46 .63 .56 9/16 .078
5/16 1/8-28 5-2K T2HF 5MA2K 1.32 0.68 1.28 .66 .38 7/16 .219
5/16 1/4-19 5-4K T2HF 5MA4K 1.53 0.68 1.49 .66 .56 9/16 .219
A 3/8 1/4-19 6-4K T2HF 6MA4K 1.57 0.72 1.53 .69 .56 9/16 .281
K R 3/8 3/8-19 6-6K T2HF 6MA6K 1.61 0.72 1.56 .69 .56 11/16 .281
3/8 1/2-14 6-8K T2HF 6MA8K 1.82 0.72 1.78 .69 .75 7/8 .281
1/2 1/4-19 8-4K T2HF 8MA4K 1.84 0.98 1.75 .91 .75 9/16 .281
BSPT
1/2 3/8-19 8-6K T2HF 8MA6K 1.87 0.98 1.78 .91 .56 11/16 .375
1/2 1/2-14 8-8K T2HF 8MA8K 2.09 0.98 2.00 .91 .75 7/8 .375
5/8 3/8-19 10-6K T2HF 10MA6K 1.91 1.03 1.84 .97 .56 11/16 .469
W 5/8 1/2-14 10-8K T2HF 10MA8K 2.14 1.03 2.06 .97 .75 7/8 .469
3/4 3/4-14 12-12K T2HF 12MA12K 2.14 1.03 2.06 .97 .75 1 1/16 .594
1 1-11 16-16K T2HF 16MA16K 2.68 1.30 2.60 1.22 .94 1 3/8 .813
Connects fractional tube to female ISO taper thread.
Generic, annealed tube stub for effective ferrule sealing.
3/8 3/8-19 6-6K T2HG 6FA6K 1.63 .72 1.59 .69 7/8 .281
1/2 1/4-19 8-4K T2HG 8FA4K 1.83 .98 1.71 .91 3/4 .375
1/2 3/8-19 8-6K T2HG 8FA6K 1.89 .98 1.80 .91 7/8 .375
1/2 1/2-14 8-8K T2HG 8FA8K 2.14 .98 2.05 .91 1-1/16 .375
A
K Connects fractional tube end to male ISO taper thread.
NOTE: Tube stub is pre-grooved as standard. Generic (non-grooved) can be ordered through Quick Response.
BSPT
1/4 1/4-19 4-4R T2HG 4FA4R 1.48 .64 1.50 .63 3/4 .156
3/8 1/4-19 6-4R T2HG 6FA4R 1.56 .72 1.55 .69 3/4 .281
3/8 3/8-19 6-6R T2HG 6FA6R 1.63 .72 1.57 .69 7/8 .281
1/2 3/8-19 8-6R T2HG 8FA6R 1.89 .98 1.78 .91 7/8 .375
1/2 1/2-14 8-8R T2HG 8FA8R 2.14 .98 1.95 .91 1-1/16 .375
A
K Connects fractional tube end to male ISO parallel thread.
NOTE: Tube stub is pre-grooved as standard. Generic (non-grooved) can be ordered through Quick Response.
BSPP
Sealing Washers
T
D
For BSPP male thread sealing For BSPP female thread sealing
Copper Washers
PART NO. THREAD D d H PART NO. THREAD D d H
M28329 1/8 .71 .39 .09 M25179 1/8 0.322 0.218 0.062
M28330 1/4 .87 .55 .09 M25180 1/4 0.436 0.312 0.062
M28331 3/8 .94 .67 .09 M25181 3/8 0.574 0.437 0.062
M28332 1/2 1.18 .87 .10 M25182 1/2 0.719 0.562 0.062
M28334 3/4 1.38 1.06 .09 M25184 3/4 0.935 0.812 0.062
M28336 1 1.65 1.34 .09 M25186 1 1.178 1 0.093
Used to provide a seal with male or female parallel ISO threads.
H
d
D
Please note the pressure ratings are based on taper threaded ends. The pressure
rating for the BSPP ends are dependent on the type of sealing washer used.
1/16"
1/16" 1/8" 5/16-24 7/16-20
(1/8-27)
1/8"
1/4"
1/2-20 3/16"
(1/4-18)
1/4"
3/8"
(3/8-18) 9/16-18
5/16"
1/2"
(1/2-14) 3/8"
3/4-16
1/2"
3/4"
(3/4-14) 7/8-14
5/8"
3/4"
1" 1-1/16-12
(1"-11 1/2)
7/8"
American Standard American Standard
Pipe Thread (NPT) Unified Thread (Straight)
1"
60 thread angle Pitch measured in inches 60 thread angle Pitch measured in inches
Truncation of root and crest are flat Truncation of root and crest are flat
Taper angle 147' Diameter measured in inches
1-1/4" 1-1/4"
1-1/2" 1-1/2"
2" 2"
10mm
3/8" 3/8"
(3/8-19) (3/8-19)
12mm
14mm
1/2" 1/2"
(1/2-14) (1/2-14)
15mm
18mm
1" 1"
20mm
(1"-11) (1"-11)
22mm
International Organization for Standards
(ISO 7/1) (ISO 228/1)
25mm
55 thread angle Pitch measured in inches 55 thread angle Pitch measured in inches
Truncation of root and crest are round Truncation of root and crest are round
Taper angle 147' Diameter measured in inches
For additional information please contact your local authorized Parker Instrumentation distributor
or call Parker Instrumentation Connectors Division and ask for Bulletin 4230-B15.
1. Terms and Conditions of Sale: All descriptions, quotations, proposals, 8. Buyers Property: Any designs, tools, patterns, materials, drawings,
offers, acknowledgments, acceptances and sales of Sellers products are confidential information or equipment furnished by Buyer or any other
subject to and shall be governed exclusively by the terms and conditions items which become Buyers property, may be considered obsolete and
stated herein. Buyers acceptance of any offer to sell is limited to these terms may be destroyed by Seller after two (2) consecutive years have elapsed
and conditions. Any terms or conditions in addition to, or inconsistent with without Buyer placing an order for the items which are manufactured using
those stated herein, proposed by Buyer in any acceptance of an offer by such property, Seller shall not be responsible for any loss or damage to
Seller, are hereby objected to. No such additional, different or inconsistent such property while it is in Sellers possession or control.
terms and conditions shall become part of the contract between Buyer and 9. Taxes: Unless otherwise indicated on the face hereof, all prices and
Seller unless expressly accepted in writing by Seller. Sellers acceptance charges are exclusive of excise, sales, use, property, occupational or like
of any offer to purchase by Buyer is expressly conditional upon Buyers taxes which may be imposed by any taxing authority upon the manufac-
assent to all the terms and conditions stated herein, including any terms in ture, sale or delivery of the items sold hereunder. If any such taxes must
addition to, or inconsistent with those contained in Buyers offer, Acceptance be paid by Seller or if Seller is liable for the collection of such tax, the
of Sellers products shall in all events constitute such assent. amount thereof shall be in addition to the amounts for the items sold. Buyer
2. Payment: Payment shall be made by Buyer net 30 days from the date agrees to pay all such taxes or to reimburse Seller therefore upon receipt
of delivery of the items purchased hereunder. Amounts not timely paid of its invoice. If Buyer claims exemption from any sales, use or other tax
shall bear interest at the maximum rate permitted by law for each month imposed by any taxing authority, Buyer shall save Seller harmless from
or portion thereof that the Buyer is late in making payment. Any claims by and against any such tax, together with any interest or penalties thereon
Buyer for omissions or shortages in a shipment shall be waived unless Seller which may be assessed if the items are held to be taxable.
receives notice thereof within 30 days after Buyers receipt of the shipment. 10. Indemnity For Infringement of Intellectual Property Rights: Seller
3. Delivery: Unless otherwise provided on the face hereof, delivery shall shall have no liability for infringement of any patents, trademarks, copy-
be made F.O.B. Sellers plant. Regardless of the method of delivery, how- rights, trade dress, trade secrets or similar rights except as provided in this
ever, risk of loss shall pass to Buyer upon Sellers delivery to a carrier. Any Part 10. Seller will defend and indemnify Buyer against allegations of
delivery dates shown are approximate only and Seller shall have no liability infringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress and
for any delays in delivery. trade secrets (hereinafter Intellectual Property Rights). Seller will defend
4. Warranty: Seller warrants that items sold hereunder shall be free at its expense and will pay the cost of any settlement or damages awarded
from defects in material or workmanship. THIS WARRANTY COMPRISES in an action brought against Buyer based on an allegation that an item sold
THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PRO- pursuant to this contract infringes the Intellectual Property Rights of a third
VIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY, party. Sellers obligation to defend and indemnify Buyer is contingent on
GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. Buyer notifying Seller within ten (10) days after Buyer becomes aware of
ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MER- such allegations of infringement, and Seller having sole control over the
CHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, defense of any allegations or actions including all negotiations for settle-
IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR ment or compromise. If an item sold hereunder is subject to a claim that it
COURSE OF DEALING ARE HEREBY DISCLAIMED. infringes the Intellectual Property Rights of a third party, Seller may, at its
sole expense and option, procure for Buyer the right to continue using said
NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-
item, replace or modify said item so as to make it noninfringing, or offer to
TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR
accept return of said item and return the purchase price less a reasonable
PARTIALLY, TO BUYERS DESIGNS OR SPECIFICATIONS.
allowance for depreciation. Notwithstanding the foregoing, Seller shall
5. Limitation Of Remedy: SELLERS LIABILITY ARISING FROM OR IN have no liability for claims of infringement based on information provided
ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT by Buyer, or directed to items delivered hereunder for which the designs
SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT are specified in whole or part by Buyer, or infringements resulting from the
OF THE ITEMS SOLD, AT SELLERS SOLE OPTION. IN NO EVENT modification, combination or use in a system of any item sold hereunder.
SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUEN- The foregoing provisions of this Part 10 shall constitute Sellers sole and
TIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSO- exclusive liability and Buyers sole and exclusive remedy for infringement
EVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING of Intellectual Property Rights.
FROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR
If a claim is based on information provided by Buyer or if the design for an
ITEMS SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM
item delivered hereunder is specified in whole or in part by Buyer, Buyer
BREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN
shall defend and indemnify Seller for all costs, expenses or judgments
TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE
resulting from any claim that such item infringes any patent, trademark,
TO WARN OR STRICT LIABILITY.
copyright, trade dress, trade secret or any similar right.
6. Changes, Reschedules and Cancellations: Buyer may request to
11. Force Majeure: Seller does not assume the risk of and shall not be
modify the designs or specifications for the items sold hereunder as well
liable for delay or failure to perform any of Sellers obligations by reason of
as the quantities and delivery dates thereof, or may request to cancel all
circumstances beyond the reasonable control of Seller (hereinafter Events
or part of this order, however, no such requested modification or cancellation
of Force Majeure). Events of Force Majeure shall include without limita-
shall become part of the contract between Buyer and Seller unless accepted
tion, accidents, acts of God, strikes or labor disputes, acts, laws, rules or
by Seller in a written amendment to this Agreement. Acceptance of any
regulations of any government or government agency, fires, floods, delays
such requested modification or cancellation shall be at Sellers discretion,
or failures in delivery of carriers or suppliers, shortages of materials and any
and shall be upon such terms and conditions as Seller may require.
other cause beyond Sellers control.
7. Special Tooling: A tooling charge may be imposed for any special tool-
12. Entire Agreement/Governing Law: The terms and conditions set
ing, including without limitation, dies, fixtures, molds and patterns, acquired
forth herein, together with any amendments, modifications and any different
to manufacture items sold pursuant to this contract. Such special tooling
terms or conditions expressly accepted by Seller in writing, shall constitute
shall be and remain Sellers property notwithstanding payment of any
the entire Agreement concerning the items sold, and there are no oral or
charges by Buyer. In no event will Buyer acquire any interest in apparatus
other representations or agreements which pertain thereto. This Agreement
belonging to Seller which is utilized in the manufacture of the items sold
shall be governed in all respects by the law of the State of Ohio. No actions
hereunder, even if such apparatus has been specially converted or adapt-
arising out of the sale of the items sold hereunder or this Agreement may
ed for such manufacture and not withstanding any charges paid by Buyer.
be brought by either party more than two (2) years after the cause of action
Unless otherwise agreed, Seller shall have the right to alter, discard or
accrues.
otherwise dispose of any special tooling or other property in its sole dis-
cretion at any time. 11/98-P