7) ) Indicate trip Circuit supervision provision in
the trip circuit.
8) Indicate Protection trip signal circuit also 9) Taikai to confirm that interlocking of 1) Auto reclose signal circuit shall also be breaker operations with isolators and earth indicated in the closing circuit switch will be taken care in bay control 14)Following indication shall also be available on Local panel and unit(Intelligent electronic device) panel. Also 2) Master trip reset interlocking remote location inform where the Interposing relay for remote' shall be included in the Closing CB in remote or Local operation of CB (Opening and closing) will circuit. CB ON, OFF and Trip be located (in CB control cubicle or bay CB Healthy control unit panel) ? 10) Indicate Protection trip due to pole TC-1 Healthy discrepancy protection TC-2 healthy Closing coil healthy 3) Give Provision CB in test position for future closing CB in service position interlock in Control supply-1 healthy closing circuit Control supply-2 healthy path 13)What is WSK? Add AC control supply healthy description. CB spring charged SF-6 pressure Low Indications 4) Duplicate DC supply shall be available for the control circuit with auto changeover facility in case any DC supply fails 20)What is Heater Spring alarm? 5) DC supply voltage shall match with 21)Indicate the data available DC 11) What supply at PGCB is the substation 19)Explain all these Alarms purpose of JS? 15)AC supply: 3phase 400V 6) Breaker shall be with SF6 AC, 1phase 230V AC as arc extinction medium 12)What is the purpose of CK in tripping circuit 16)Include following details in the title block 18)Breaker shall be 25) Taikai to clarify whether 1)drawing no. 22)Selector Switch in 23)Selector Switch in Local with SF6 as arc 'Antitrip relay' is the 'Anti- 2)revision no. remote position position extinction medium Pumping relay'. If yes 3) issue date rename it as 'Anti-pumping 4) Design check, approved details relay'. 17)Include Complete Project details as follows Kushiara Power Company Limited 163MW Combined Power Project 24)Rename 'core' Fenchuganj, Bangladesh as 'Coil'