Академический Документы
Профессиональный Документы
Культура Документы
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Catalyst 2900 Platforms
Catalyst 4000 Platforms
NetPro Discussion Forums - Featured Conversations
Related Information
Introduction
The purpose of this document is to clarify the naming conventions among the various Catalyst 2900 and Catalyst 4000 switches.
Provided in the tables are the product names, the platform from which the product was derived, any relevant details on the product, the
command line interface (CLI) used on the product, the image name, and which software configuration and troubleshooting document can
be used for a particular switch platform.
Refer to the respective product link in order to learn more technical details on a particular product in these tables.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
5002 chassis
Supervisor Engine
I with
2100BaseTX
Catalyst 2900 uplinks Catalyst Uses All Catalyst 5000 series
Catalyst
OS cat5000-sup configuration/troubleshooting
WS-C2901, WS-C2902 5000 12 10/100BaseTX (CatOS) image documents can be used.
(2901) or 12
100BaseFX
multimode fiber
(MMF) (2902)
switch ports
5002 chassis
Supervisor Engine
II with 2
Catalyst 2926 100BaseTX Uses All Catalyst 5000 series
Catalyst
WS-C2926T, (2926T) or CatOS cat5000-sup configuration/troubleshooting
5000
WS-C2926F 100BaseFX MMF image documents can be used.
(2926F) uplinks
24 10/100BaseTX
switch ports
5002 chassis
Supervisor Engine
III/NetFlow
Feature Card
Catalyst 2926G (NFFC) with 2 Uses All Catalyst 5000 series
Catalyst
WS-C2926GS, fixed 1000BaseSX CatOS cat5000-sup3 configuration/troubleshooting
5000
WS-C2926GL (2926GS) or image documents can be used.
1000BaseLX/LH
(2926GL) uplinks
24 10/100BaseTX
switch ports
Supervisor Engine
I
Supervisor Engine
I (with
cost-reduced
application-specific
Catalyst 2980G-A integrated circuits All Catalyst 4000 series
Catalyst Uses cat4000
[ASICs]) CatOS configuration/troubleshooting
WS-C2980G-A 4000 image
documents can be used.
80 10/100BaseTX
switch ports + 2
1000BaseX GBIC
switch ports
48 10/100BaseTX
Ethernet processor
Catalyst 2948G-L3 interface (EPIF) + All Catalyst 2948G-L3 and
Cisco Uses
Catalyst 2 1000BaseX 4908G-L3 series
WS-C2948G-L3, IOS cat2948g-in-mz
8540 GBIC Gigabit configuration/troubleshooting
WS-C2948GL3-DC Software image
processor interface documents can be used.
(XPIF) Layer 3
switched interfaces
Catalyst 2900 XL
Fixed configuration
WS-C2912-XL, Cisco
switches with various All Catalyst 2900 XL/3500
WS-C2924C-XL, IOS
media types available Uses c2900XL XL series
WS-C2924-XL, N/A Software
(Some switches support image configuration/troubleshooting
WS-C2912MF-XL, (Layer 2
expansion modules for documents can be used.
WS-C2924M-XL, only)
additional ports.)
WS-C2924M-XL-EM-DC
Catalyst 2900
Cisco
Long-Reach Ethernet 4 fixed autosensing IOS All Catalyst 2900 XL/3500
Uses special
(LRE) XL Catalyst 10/100 ports XL series
Software c2900XL
2900XL configuration/troubleshooting
WS-C2912-LRE-XL, 12 or 24 LRE ports (Layer 2 images documents can be used.
only)
WS-C2924-LRE-XL
8 10/100 port fixed
configuration Catalyst 2940
switches documentation, most of the
Cisco
Catalyst 2950
Catalyst 2940 1 10/100/1000 port IOS Uses c2940 documentation, and most of
N/A (TT-S) or 1 Software
2940-8TT-S, 2940-8TF-S images the Catalyst 2900 XL/3500
100Base-FX port (Layer 2
XL series
and 1 small form only)
configuration/troubleshooting
factor pluggable documents can be used.
(SFP) port (TF-S)
Catalyst 2950
Uses c2950 or
WS-C2950-12,
c2955 image,
WS-C2950-24,
respectively.
WS-C2950C-24,
WS-C2950T-24, Catalyst 2950
WS-C2950G-12-EI, 12, 24 or 48 10/100 port switches
WS-C2950G-24-EI, Cisco recognize Catalyst 2950 documentation
fixed configuration
WS-C2950G-24-EI-DC, IOS either the and most of the Catalyst
switches with various
WS-C2950G-48-EI, N/A Software Enhanced 2900 XL/3500 XL series
media ports available,
WS-C2950SX-24, (Layer 2 Image (EI) or configuration/troubleshooting
that depends on the
WS-C2950SX-48-SI, only) the Standard documents can be used.
model
WS-C2950T-48-SI Image (SI), that
depends on the
Catalyst 2955
Caution: The Catalyst 4500 Series Supervisor Engines I and II can run only Catalyst OS Software and cannot be converted to run
with Cisco IOS Software.
Caution: The Catalyst 4500 Series Supervisor Engines II+, II+10GE, II+TS, III, IV, V, and V-10GE can run with only Cisco IOS
Software and cannot be converted to run with Catalyst OS Software.
Related Information
Products & Services - Cisco Switches
LAN Product Support Pages
LAN Switching Support Page
Technical Support & Documentation - Cisco Systems
All contents are Copyright 1992-2006 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.