Академический Документы
Профессиональный Документы
Культура Документы
Product Guide
Earth-fault Relay SPAJ 110 C
1MRS750351-MBG
Product Guide Issued: April 1999
Status: Updated
Version: C/12.04.2006
Data subject to change without notice
Features Low-set neutral overcurrent stage with defi- Digital display of setting values, neutral
nite time or inverse time characteristic current measured, memorized fault values
and more
High-set neutral overcurrent stage with def-
inite time characteristic Continuous self-supervision with auto-diag-
nostics of hardware and software
Output relay functions to be freely config-
ured Member of the SPACOM product family
and ABBs Distribution Automation system
Flexible adaptation to different types of
application CE marking according to the EC directive
for EMC
Serial interface for connecting the relay to
a fibre-optic object bus and substation and
network control systems
Application The earth-fault relay SPAJ 110 C is designed inverse-time characteristic, while the high-set
to be used for selective earth-fault protection, stage operates with definite time characteris-
either primary or back-up protection, in sol- tic only. The earth-fault relay is used both as
idly earthed or low-resistance earthed power primary and back-up earth-fault protection
systems. relay for feeders, transformers, generators
and motors. The relay can be configured to
The relay has two protection stages: a low-set cooperate with a residual voltage relay used
overcurrent stage I0> and a high-set overcur- for blocking/deblocking the operation of the
rent stage I0>>. The low-set stage operates earth-fault relay.
with definite-time characteristic or with
3
Earth-fault Relay SPAJ 110 C
1MRS750351-MBG
Product Guide
4
Earth-fault Relay SPAJ 110 C
1MRS750351-MBG
Product Guide
5
Earth-fault Relay SPAJ 110 C
1MRS750351-MBG
Product Guide
6
Earth-fault Relay SPAJ 110 C
1MRS750351-MBG
Product Guide
Block diagram
sspaj110
7
Earth-fault Relay SPAJ 110 C
1MRS750351-MBG
Product Guide
139 1
Panel cut-
136
162
out
dim100
Semi-flush mounting
a b
Raising frame a b
SFM100_1
SPA-ZX104 SPA-ZX110
SPA-ZX105 SPA-ZX115
SPA-ZX106
+0,4 158 263
482,6 0 (19")
115
6
10
177 0 (4U)
101,6
7
+0,4
312
292
21,5
6
115 98
104_6_10
Fig. 4 Mounting cabinets and frames as well as projecting mounting (dimensions in mm)
8
Earth-fault Relay SPAJ 110 C
1MRS750351-MBG
Product Guide
Order numbers
Earth-fault relay SPAJ 110 C without test adapter RS 421 010-AA, CA, DA, FA
Earth-fault relay SPAJ 110 C including test adapter RS 421 210-AA, CA, DA, FA
RTXP 18
The last two letters of the order number indicate the AA equals fn = 50 Hz and Uaux = 80265 V ac/dc
rated frequency fn and the auxiliary voltage Uaux of CA equals fn = 50 Hz and Uaux = 1880 V dc
the relay as follows: DA equals fn = 60 Hz and Uaux = 80265 V ac/dc
FA equals fn = 60 Hz and Uaux = 1880 V dc
9
ABB Oy
Distribution Automation
P.O. Box 699
FI-65101 Vaasa, FINLAND
Tel +358 10 22 11
Fax +358 10 224 1094
www.abb.com/substationautomation