Академический Документы
Профессиональный Документы
Культура Документы
113
Drive Station Run Check the pulley for mechanical fault, check for irregularities of any kind
Double Drive Station
Run Check fasteninig of bearing housing and the temp. in pulley bearings (60C)
Drive Pulley Stop Check Condition of Rubber lining .
Scraper of pulley
Run Check scraper blades for wear and position adjustement.
Stop Complete inspection for gear condition, bearing clearance, seals, sleeves,back stop.
Drive unit
(Motor, gearbox, coupling, bearing)
Run Check Leakage of oil, Oil level, Noise, Temperature, Vibration, & Cleanness.
Run Check gear box runs smoothly and does not generate excessive noise
Fludex coupling Stop Check General condition, oil level, oil condition and oil seal
Plough deflector
Stop Check Movability of the plough deflector on the suspinsion
Shock absorber, Self Cleaning Idlers Run Check the idler center on the shaft.
Stop Check that the rubber lining on Idlers is intact for the shock absorber Idlers
Run Check that the wire is intact, & is correctly placed arrounf the rope pulleys.
Run Check Rotation of Idlers freely without abnormal Noise,check damaged, and wear.
Self-adjusting idler set Run Check that the supporting iron are free to turn around the vertical axis.
1 of 2
Issue: 1 04/15/2017 Prepared By Inspection Dpt.
13:53:27
Inspection Bulletin No. 113
Belt Weigher
Run Check the taring of of the belt weigher.
Emergency Stop
Stop Examine wire rope for damage and check rope anchorage
2 of 2
Issue: 1 04/15/2017 Prepared By Inspection Dpt.
13:53:27