Вы находитесь на странице: 1из 5

Elmer Cruz

Instrument Supervisor at Daewoo International

Experience
Instrument Supervisor at Daewoo International
June 2014 - Present (1 year 7 months)
- Lead team performing preventive maintenance and corrective work on DELTA V DCS, PLC
(TRICONEX), Plant Process controls instruments & equipment's, Gas Analyzer,Metering System
(Daniel), Well Head/Sub Sea control system and Fire & Gas Detection System - Carried out fault
finding and planned maintenance service of Instrumentation and Controls of Utilities, Process, Power
Generator Turbines (SOLAR TAURUS) and Gas Export Turbines (SIEMENS-SGT 400). - Participated
Daewoo International Competency and Skills program as required in the Instrument Maintenance
Department, completed Assessor qualification course. Trained and assessed Local National for Instrument
Competency Assessment. Technicians.

Instrument Maintenance Focal Point at CLOUGH/AMEC JV


November 2004 - June 2014 (9 years 8 months)
- Lead team performing preventive maintenance and corrective work on DCS/PLC Plant Process
controls instruments & equipment's, Analyzer and Fire & Gas Detection System (Deluge system,
Turbine Water mist System, Inergen System). - Performed corrective and planned maintenance service of
Instrumentation and Controls of Utilities, Process, Power Generator Turbines (SOLAR TAURUS),
Flash Gas Compressor (SOLAR- MARS) and Gas Export/Re-Injection Turbines (Rolls-Royce RB211).
- Carry out technical work in modification and upgrading of all plant Instrumentation work handling
project activities or as directed. - Ensure accurate & comprehensive details of all instrumentation PM records
and issues are recorded in computerized maintenance management system (SAP) to accurately reflect
current status. - Provide detailed repair and failure codes of plant instruments as required providing onshore
support and offshore maintenance team to help Identify areas for improvement - Utilized companys
materials inventory system and online facilities to generate parts and materials request in establishing
adequate stocks levels for various pieces of equipment instrument in the Offshore installation. - Ensure all
activities during repair, maintenance, planned shutdown, installation, commissioning and rehabilitation
are carried out safely in accordance with established policies and procedure. - Constantly reviews installed
systems & equipment to ensure safe & correct operation. Initiates remedial action where required, update
maintenance procedure & makes suggestions regarding modifications or additions to the existing
installations. - Conduct Close & Detailed inspection of Ex equipment in Hazardous areas and record all non
conformances raise corrective work.

Instrument Lead Technician at AMEC


November 2000 - November 2004 (4 years 1 month)

Page1
- Carried out preventive and restorative maintenance task on plant equipment instruments, maintain
assets technical integrity by execution of work in accordance with maintenance procedure. - Ensure
plant instrument is available to meet production and other target including Safety Critical Compliance
- Maintain equipment history, technical information and all relevant records in SAP for maintenance
activities, identify materials and spare parts requirement in store stock holding. Ensure parts and materials
are prepared in SAP and monitor materials are supplied in advance of the schedule of execution. -
Performed service maintenance and troubleshooting of gas export turbines (Rolls-Royce -RB211) and
power generator (SOLAR Turbines -TAURUS). - Carried out Yokogawa Pro-safe PLC safeguarding Over-
Ride (Inhibit) during troubleshooting, maintenance and testing of safety system, function check of ESD
& Fire & Gas I/O Logic to ensure safety system are functioning properly. - Identify instrumentation
problems and raises queries and TMR's (Technical Modification Requests). - Make changes to improve
and correct defective instrumentation and plant control; - Conduct Close & Detailed inspection of Ex
equipment in Hazardous areas. Constantly reviews installed systems & equipment to ensure safe & correct
operation. Initiates remedial action where required & makes suggestions regarding modifications or
additions to the existing installations. - Participated Shell Competency and Skills program as required in
the instrument maintenance team, completed Assessor qualification course. Train and lead Instrument
Technicians. - Ensure the safety of personnel and integrity of facilities at all times. In the event of station
emergency assume role as Fire Team Leader, provide competent members to the emergency response
crew. Train in First Aid, Pollution Control Officer, Dangerous Goods Handler, HLO, Gas tester and
Lifeboat Coxswain.

Instrumentation Supervisor at Mitsubishi Plant Construction Company - MHI Japan


September 1996 - December 2000 (4 years 4 months)
- Coordinate with client and subcontractor engaged in construction activities ensuring compliance with
specifications. Witness completion of checking, function test of cause & effect and - Commissioning
for start-up of Instrument equipment, package equipment (BOP- Balance of Plant equipment). - Co-
ordinate with Contractor for all Construction, Pre-commissioning & Commissioning activities of
Instrument section till plant becomes operational. - Work includes DCS/PLC I/O loop sequence check
and troubleshooting of instrumentation control systems and Plant protection system. - Supervised
member engaged in plant process equipment testing, commissioning and maintenance along with the
coordination and supply of technical assistance in operation to ensure efficient work performance
and required operating standards are met - Update drawings and instrument maintenance procedure
following the completion of changes and plant modifications. Review all reports on all instrumentation
equipment breakdowns, modification and changes for engineering report. - Carryout Factory Acceptance
Test of supplied controls systems. - Liaise with contractor QC and ensure that they are aware of project
specifications amendment ensuring preparations of as built document are review and updated. -
Responsible for implementing of modifications, overhaul and repair of instrument component. - Assist with
post construction and pre start-up activities as required by client. Assist clients with

Page2
Fire & Gas Supervisor at AL-Bilad Fire Fighting System LTD.
May 1993 - December 1995 (2 years 8 months)
- Provide supervisory coverage in Gas Oil Separation Plant (G.O.S.P.) maintenance crew, - Performed
and supervised equipment breakdown ensuring all problems are duly attended and effectively resolved. -
Review installation procedure, prepare commissioning procedures and make recommendations for system
reliability improvement during document review. Review and comment on proposal for new project and
advises implication of new projects, liaise with the team to agree estimates and timescales of forthcoming
work. - Supervise safety inspection operation, complex installation, testing and commissioning, repair,
troubleshooting, modifications job and reviewing equipment performance to ascertain status. - Supervise
Fire & Gas testing, sequence test of Cause & Effect input/output Logic and Deluge system function Test.
- Supervised fire & gas panel fabrication and hardware assembly of control components use in oil & gas
facilities..

Sr. Instrumentation Technician at Mohammad AL-Mojil Group


May 1992 - April 1993 (1 year)
- Conduct hook up activity, commissioning & testing of feedback process control, repair and testing of
all pneumatic and electronics transmitter in the process and utilities. - Performed loop-checking activity
and plant process protection safety system and F&G testing. - Ensure commissioning work & activities
are completed safely, efficiently, and in accordance with procedure. Ensure all commissioning
checks sheets, reports, and - Punch list are completed, as required, and incorporated within each hand-
over package. - Troubleshoots, fault finds, and repairs process and supporting instrumentation as needed;
- Prepare all necessary reports regarding work done breakdown, modification work, acceptance
test, coordinate client and vendors for incoming work activities and meetings. - Assist Vendor in pre-
commissioning and commissioning of package equipment.

Skills & Expertise


SAP R/3
Microsoft
PLC
Foundation Fieldbus
Fire & Gas
Equipment Commissioning
Smart Plant Instrumentation
DCS
Onshore
Preventive Maintenance
Factory
Instrumentation
Inspection
P&ID
Turbines

Page3
Commissioning
Fire Management
Process Control
Offshore Oil & Gas
Offshore Drilling
Troubleshooting
Gas
Testing
HAZOP
SAP
FPSO
Gas Turbines
Plant Maintenance
LNG
Refinery
Petrochemical
Maintenance & Repair
EPC

Education
Guzman Institute of Electronics
Instrumentation & Controls, 1989 - 1991
Guzman Institute of Electronics

Page4
Elmer Cruz
Instrument Supervisor at Daewoo International

Contact Elmer on LinkedIn

Page5

Вам также может понравиться