Академический Документы
Профессиональный Документы
Культура Документы
A body of weight W is required to move up on rough inclined plane whose angle of inclination
with the horizontal is . The effort applied parallel to the plane is given by(where = tan =
Coefficient of friction between the plane and the body.)
A. P = W tan
B. P = W tan( + )
C. P = W (sin + cos)
D. P = W (cos + sin)
ANSWER: C
The above figure shows the two equal forces at right angles acting at a point. The value of force
R acting along their bisector and in opposite direction is
A.P/2
B.2P
C.
D.
ANSWER: C
The centre of gravity of an equilateral triangle with each side a, is __________ from any of the
three sides.
A.3a/2
B.23a
C.a/23
D.32a
ANSWER: C
Mass moment of inertia of a uniform thin rod of mass M and length (l) about its mid-point and
perpendicular to its length is
A.
B.
C.
D.
ANSWER: D
ANSWER: C
ANSWER: A
The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking
place, is (where RN = Reynold number)
A.1/RN B.4/RN
C.16/RN D.64/RN
ANSWER: C
ANSWER: D
ANSWER: B
An eutectoid steel consists of
A.wholly pearlite
B.wholly austenite
C.pearlite and ferrite
D.pearlite and cementite
ANSWER: A
Nodular cast iron is produced by adding __________ to the molten cast iron.
A.nickel B.chromium
C.copper D.magnesium
ANSWER: D
Which of the following has a fine gold colour and is used for imitation jewellery?
A.Silicon bronze
B.Aluminium bronze
C.Gun metal
D.Babbit metal
ANSWER: B
ANSWER: D
A thin cylindrical shell of diameter (d) and thickness (t) is subjected to an internal pressure (p).
The ratio of longitudinal strain to volumetric strain is
A.
B.
C.
D.
ANSWER: D
ANSWER: C
ANSWER: B
In order to give the primary balance of the reciprocating parts of a multi-cylinder in-line engines,
A.the algebraic sum of the primary forces must be equal to zero
the algebraic sum of the couples about any point in the plane of the primary forces must be
B.
equal to zero
C.both (a) and (b)
D.none of these
ANSWER: C
The pair is known as a higher pair, when the relative motion between the elements of a pair is
A.turning only
B.sliding only
C.rolling only
D.partly turning and partly sliding
ANSWER: D
The Whitworth quick return motion mechanism is formed in a slider crank chain when the
A.coupler link is fixed
B.longest link is a fixed link
C.slider is a fixed link
D.smallest link is a fixed link
ANSWER: A