Академический Документы
Профессиональный Документы
Культура Документы
1
Chemseal KR
__________________________________________________________________
Technical Data
__________________________________________________________________
Density: Approx 1.40 Kg/liter
__________________________________________________________________
Service temperature - 20 C to + 70 C
__________________________________________________________________
Movement capacity 20% of the average joint width (expansion,
contraction)
__________________________________________________________________
Application Details
__________________________________________________________________
Joint configuration - Minimum joint width 8 mm
- Maximum joint width 40 mm
- Minimum joint depth 8 mm
- Width /depth ratio for expansion joints: 1:1 to 1:1.5
- Width /depth ratio for construction joints: 1: 1 to 1:2
__________________________________________________________________
Substrate All surfaces must be sound, clean, dry and free from
Preparation: all loosely adhering particles. Priming is not
required.
__________________________________________________________________
Application The Chemseal - KR is poured without delay either from
the melter-pourer or with prepared clean and dry joints.
Avoid air entrapment pouring. Protect from water/rain for
first 24 hours. Silicate powder can be mixed with
Chemseal KR with the ratio of 1: 0.5Kg (if required)
__________________________________________________________________
Cleaning Clean all tools and equipment immediately after
use with suitable solvent.
__________________________________________________________________
Remarks Do no use for joints in bituminous paving. Not
suitable for contact with drinking water.
__________________________________________________________________
2
Chemseal - KR
________________________________________________________
Safety
________________________________________________________
Precautions 1.Wear goggles and gloves during
application. In case of contact with eye
rinse immediately with clean water and
seek medical attention without delay.
2. If swallowed or if vapours are inhaled move
to fresh air. Seek medical advice.
3. Remove immediately contaminated clothing
after application. Wash hands after work
with plenty of soap and water.
__________________________________________________________________
Ecology Do not dispose of into water or soil but
according to local regulations.
__________________________________________________________________
Transport Non-hazardous.
__________________________________________________________________
Page 3 of 3