Академический Документы
Профессиональный Документы
Культура Документы
Front Cover
B006-6761-A000
0408
The product described in this book is a licensed product of NCR Corporation.
Other product names mentioned in this publication may be trademarks or registered trademarks of their respective companies and are
hereby acknowledged.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become available.
NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances,
photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office
for information that is applicable and current.
2008
By NCR Corporation, Dayton, Ohio U.S.A.
http://www.ncr.com
All Rights Reserved
6626 Parts Identification Manual
Revision Record
Revision Record
Table of Contents
Chapter 1: Introduction
MANUAL ORGANIZATION ........................................................................................ 1-1
Headers and Footers.................................................................................................... 1-1
Revision Record.......................................................................................................... 1-2
ASSEMBLIES ................................................................................................................. 1-2
Identification of Assemblies ....................................................................................... 1-2
Sub-assemblies with no Parts Breakdown .................................................................. 1-2
Multiple Views ........................................................................................................... 1-2
PARTS LISTS ................................................................................................................. 1-3
Columns in Parts Lists ................................................................................................ 1-3
Indented Parts Lists..................................................................................................... 1-3
References to Contents ............................................................................................... 1-3
Reference Letter Beginning with Z ......................................................................... 1-4
Recommended Spare Parts ......................................................................................... 1-4
Components Identified by Schematic Symbol............................................................ 1-4
FEATURES ..................................................................................................................... 1-4
UPDATES ....................................................................................................................... 1-4
Chapter 2: Alarms
INTRODUCTION ........................................................................................................... 2-1
STANDARD ALARMS SYSTEM ................................................................................. 2-2
ENHANCED ALARM SYSTEM .................................................................................. 2-3
HIGH SECURITY ALARM SYSTEM .......................................................................... 2-4
BASIC ALARMS WITH STATUS ASSEMBLY .......................................................... 2-5
ENHANCED ALARM WITH STATUS ASSEMBLY .................................................. 2-5
ALARMS BASIC AND ENHANCED WITH STATUS ASSEMBLY ......................... 2-6
BASIC ALARMS HARNESS......................................................................................... 2-6
UX DOOR SWITCH HARNESS.................................................................................... 2-7
ATHENA ALARMS HARNESS, R/A ........................................................................... 2-7
ENHANCED ALARMS HARNESS .............................................................................. 2-8
DOOR SWITCH HARNESS (RAL)............................................................................... 2-8
MAS HAMILTON HARNESS ....................................................................................... 2-9
Chapter 3: Audio
INTRODUCTION ........................................................................................................... 3-1
AUDIO PUBLIC PRIVATE AFA WITH HEADPHONE JACK DETECT (F552) ...... 3-2
Chapter 5: Cabinetry
INTRODUCTION ........................................................................................................... 5-1
6626 CEN SAFE ASSEMBLIES R/A ............................................................................ 5-2
6626 CEN-L SAFE ASSEMBLIES ................................................................................ 5-3
6626 UL SAFE ASSEMBLY R/A .................................................................................. 5-4
CABINETRY ASSEMBLY (VIEW 1 OF 3).................................................................. 5-5
CABINETRY ASSEMBLY (VIEW 1 OF 3).................................................................. 5-6
CABINETRY ASSEMBLY (VIEW 2 OF 3).................................................................. 5-7
CABINETRY ASSEMBLY VIEW 3 OF 3 .................................................................... 5-8
CABINETRY ASSEMBLY 3 OF 3 ................................................................................ 5-9
6626 STANDARD FASCIA ......................................................................................... 5-10
6626 BARCODE FASCIA ............................................................................................ 5-11
6626 RECEIPT BLANK ............................................................................................... 5-12
8 INCH SLEEVE ASSEMBLY .................................................................................... 5-13
13 INCH SLEEVE ASSEMBLY .................................................................................. 5-14
PRIVACY WINGS........................................................................................................ 5-15
6626 STANDARD COLLAR ASSEMBLY ................................................................. 5-16
6626 ADVERT COLLAR ASSEMBLY....................................................................... 5-17
W/O CAMERA ENABLE............................................................................................. 5-18
SHUTTER ASSEMBLY .............................................................................................. 5-19
NO LOCK KIT (STANDARD SECURITY) ................................................................ 5-20
Chapter 7: Core
INTRODUCTION ........................................................................................................... 7-1
PIVAT CORE ASSEMBLY ........................................................................................... 7-2
ATX SOCKET 478 MOTHERBOARD.......................................................................... 7-3
PIRAT TOP LEVEL PCB ASSEMBLY......................................................................... 7-4
PIVAT - PCI PCCM TOP LEVEL ASSEMBLY ........................................................... 7-4
UOP PCI GRAPHICS CARD ......................................................................................... 7-5
FLOPPY DISK DRIVE CABLE ASSEMBLY .............................................................. 7-5
ULTRA ATA CABLE ASSEMBLY .............................................................................. 7-6
PIVAT DISK SECURITY HARNESS ........................................................................... 7-6
USB BREAKOUT ASSEMBLY .................................................................................... 7-7
PC BEEP TO AUXILIARY IN AUDIO HARNESS...................................................... 7-7
PIRAT PIVAT HARNESS.............................................................................................. 7-8
TALLADEGA CORE ASSEMBLY ............................................................................... 7-9
TALLADEGA MOTHERBOARD ............................................................................... 7-10
PIRAT TOP LEVEL PCB ASSEMBLY....................................................................... 7-11
PIRAT TALLADEGA HARNESS ............................................................................... 7-11
TALLADEGA - USB 2.0 4 PORT BREAK OUT ASSEMBLY.................................. 7-12
SERIAL ATA WITH LATCHED CONNECTORS CABLE ASSEMBLY ................. 7-12
FLOPPY DISK DRIVE CABLE ASSEMBLY ............................................................ 7-13
DISK TAMPER HARNESS ......................................................................................... 7-13
Chapter 9: Display
INTRODUCTION ........................................................................................................... 9-1
Table of Contents
Introduction
Table of Contents
Introduction
This manual is designed to provide complete identification of all parts which may be
replaced in the unit.
MANUAL ORGANIZATION
This publication is divided into the following chapters:
Chapter 1 - Introduction
Chapter 2 - Alarms
Chapter 3 - Audio
Chapter 4 - Auto Supervisor Entry
Chapter 5- Cabinetry
Chapter 6 - Card Reader
Chapter 7 - Core
Chapter 8 - Currency Dispense
Chapter 9 - Display
Chapter 10 - External Cabling
Chapter 11 - Harnesses
Chapter 12 - Keyboards
Chapter 13 - Miscellaneous Devices and Interface
Chapter 14 - Operator Interface
Chapter 15 - Power Supply
Chapter 16 - Printers
Chapter 17 - Security Enclosure
Each chapter contains information relating to specific parts of the ATM. In addition to the
manual contents each chapter also has its own table of contents.
Page Numbering
Pages are numbered with the chapter number and page number, split by a dash. For
example, page one of chapter three is numbered 3-1.
Dates on Pages
At the bottom of each page is a date. This is the revision date of the chapter containing that
page. All pages in a chapter have the same date, even if only one page has changed since
the last revision.
Revision Record
The Revision Record preceding the main contents pages, gives a list of all changes to this
manual since first publication.
ASSEMBLIES
Identification of Assemblies
Identification of a complete assembly, including the 10-digit number assigned to it, is
included as the first line in the parts list. The entry for the complete assembly is not
identified by a reference letter.
Multiple Views
Some complex assemblies are illustrated by different views on several adjacent pages.
Parts not referenced in one view of an assembly are referenced in another. Multiple views
are designated by a notation in the title; Cabinet Assembly (View 1 of 3), for example,
indicates that this page contains the first of three different views of the same assembly.
PARTS LISTS
The preceding example shows that the Gear Assembly (Ref. 4) comes with the Gear (Ref.
4A) and Hub Assembly (Ref. 4B) assembled. The Hub Assembly comes with the Hub
(Ref. 4B1) and Bearing (Ref. 4B2) assembled. Any one of the parts can be ordered
separately. The letter in parentheses at the end of an assembly name is used by the
Information Solutions Group in updating the manual.
References to Contents
Some assemblies shown on the illustration are called out with no 10-digit number listed
and a reference made to the contents. This indicates that there is a further breakdown of
the assembly on another page of the manual. Example:
Occasionally, the 10 digit number is given and also a reference is made to the contents. In
this case, the 10-digit number is given as a means of identifying a particular assembly
when there are other assemblies that are similar but not interchangeable. For example:
FEATURES
A feature is a collection of parts that are related but cannot be ordered as an assembly.
Where a feature is shown there is no 10-digit assembly number. Instead the parts list will
begin with reference number 1.
UPDATES
From time to time you will receive updates as the manual content is changed or added to.
Table of Contents
Alarms
Table of Contents
Chapter 2
Alarms
INTRODUCTION
This chapter covers the NCR 6626 ATMs Alarm Systems.
PRIMARY LOCK
3
5
SECONDARY
LOCK
7
PRIMARY LOCK
7
1
8
2
9
SECONDARY
LOCK
1
6
5
2
8
4
SECONDARY
LOCK
PRIMARY
LOCK
C7 R5
R20
R21
R6 U1 R12
R23 Q2
D5 VR1
R4
D3 R30
C4
J3
SW1
J1 RLY1 RLY2 RLY4
C5
J2 R28 C6
D1 D2 R16 R25
J4
R18
ALARM VIBRATION
P4 CONTACT
BOLT_THROWN
ALARM_P2
DOOR_CLOSED
ALARM_P3
RIO_BOARD
GND_1
ALARM_O/P
DETECTOR
DOOR LOCK
SENSOR 1
ALARM
P2
DOOR CLOSED
SENSOR 2
ALARM MAS-HAMILTON
P1 LOCK
Table of Contents
Audio
AUDIO PUBLIC PRIVATE AFA WITH HEADPHONE JACK DETECT (F552) ...... 3-2
Table of Contents
Chapter 3
Audio
INTRODUCTION
This chapter covers the NCR 6626 ATMs Audio feature.
MISC. I/F
J4
AUDIO
1
SUPERVISOR
SWITCH
AUDIO
H / P SOCKET
4
3
5
Table of Contents
Table of Contents
Chapter 4
SUPERVISOR
MISC. I/F
J4
SUPERVISOR
Table of Contents
Cabinetry
Table of Contents
Chapter 5
Cabinetry
INTRODUCTION
This chapter covers the NCR 6626 ATMs Cabinetry.
2
5
3
2
5
6
11
13
14
10 12
15
17 21
18
22
20
23 24
16
19
27 29
25
28
26
30
33
32
34
31
39
35
38
37
44
40
41 42
43
45
47
49 51
50
46
48
52
53
54
CABINETRY ASSEMBLY 3 OF 3
2 5
4
2 5
4
6
7
PRIVACY WINGS
3 4
SHUTTER ASSEMBLY
Table of Contents
Card Reader
Table of Contents
Chapter Number: 6
Card Reader
INTRODUCTION
This chapter covers the NCR 6626 ATMs U-IMCRW and Smart Dip Card Readers.
U-IMCRW
2
3
12 1
13
7
6
8
10
9 11
LFCC CRADLE
SW1
P7
P3
OPEN BIN
CN51 CN52
CN11
1
7
4 5
USB CABLES
TYPE A
TYPE MINI B
FAN
HEATER_P
Table of Contents
Core
Table of Contents
Chapter Number: 7
Core
INTRODUCTION
This chapter covers the NCR 6626 ATMs Pivat and Talladega Cores.
4
5
3
2
6
1
4,5
2,3
7
1
P1 P2
P1 P2 P3
BLACK GREY BLUE
SWITCH
BART
BART PCB
J6
AUX_IN
MOTHERBOARD
4
5
3
2
6
1
TALLADEGA MOTHERBOARD
P5
P1
P2
P3 P6
P4
CON 1 CON 2
P1 P2
TAMPER_ALARMS TAMPER
Table of Contents
Currency Dispense
Table of Contents
Chapter Number: 8
Currency Dispense
INTRODUCTION
This chapter covers the NCR 6626 ATMs Currency Dispense feature.
1C1
1B
1A
1F
1C
1E 1D
4 3 2
1A
1A
1A
5 4
4
5
1
1A
4 3
3
4
1
3 1
1
3
2
SW5 SW1
SW6 SW2
SW7 SW3
SW8 SW4
J1
C2
J2
J3
C1
J4
INTERPICK HARNESS
P2 P1
1 2 3
2 3
1
BOLT_SW1
BOLT_SW2
DOOR_SW_1_N/O
ANTI_AXE DOOR_SW_1_COM
DOOR_SW_2_N/O
SAFE_ICS DOOR_SW_2_COM
GREEN_LED
RED_LED
LED OPT P8
ICS SAFE P1
AA INP P7
SPR2 SPR 1
DOOR INP P3
Table of Contents
Display
Table of Contents
Chapter Number: 9
Display
INTRODUCTION
This chapter covers the NCR 6626 ATMs Display feature.
2,3
FASCIA FDK
FDK 2
FDK 1
2,3
FASCIA FDK
FDK 2
FDK 1
12 INCH TOUCHSCREEN
TYPE A 3
TYPE MINI B
15 INCH TOUCHSCREEN
1
TYPE A 3
TYPE MINI B
1
3
1
3
Table of Contents
External Cabling
Table of Contents
Chapter Number: 10
External Cabling
INTRODUCTION
This chapter covers the NCR 6626 ATMs External Cables.
NIGHT
DEPO 1
RIO
REMOTE
STATUS
NIGHT
DEPO 2
REMOTE
RELAY
Table of Contents
Harnesses
USB TYPE A TO TYPE MINI B CABLE ASSY. HIGH SPEED (480MBPS) 500 MM11-9
Table of Contents
Chapter Number: 11
Harnesses
INTRODUCTION
This chapter covers the NCR 6626 ATMs Harness feature.
GR5
GR4
GR3
GR2
SERVICE SWITCH
L CORE
N
N
L DISP
L
N
N
L
MAINS SWITCH
PSU
INLET/UPS
L (FUSE IN) L (FUSE OUT)
DC DISTRIBUTION HARNESS
DC EXT
DC EXT
PSU
DC EX
DC EX
AUDIO FASCIA
SPEAKER
SPEAKER
MEEI FASCIA
DIP MEEI
i2C
SHUTTER
MEI DISP
MEI EXT
i2C
MEI DISP
DC SAFE
DC SHUTTER
USB_TYPE_A
USB_TYPE_MINI-B
DC_IN
SW1_NO
SW1_CM
AC_IN
SW2_CM1
DC_OUT
SW2_CM2
EARTH
EARTH
SW2_NO2
SW2_NO1
AC_DISP
PWR STAT 1
USB
PSU_P6
PSU_P5
IMCRW
RECEIPT
KEYBOARD
MISC I/F
DC SPUR 1
JOURNAL
GOP
MEI DISP
TAMPER
GOP
FASCIA FDK
MISC I/F
DISPLAY
AUDIO FASCIA
MEI FASCIA
WATCHDOG
KEYBOARD
IMCRW
JOURNAL
RECEIPT
USB TYPE A TO TYPE MINI B CABLE ASSY. HIGH SPEED (480MBPS) 500 MM
TYPE A
TYPE MINI B
IN
OUT
MAINS FILTER FUSE
L
N UPS/INLET
E
GND1 GND2
HEATER HARNESS
HEATER_HUB
HEATER
SWITCH HEATER_DC
L
N HEATER
GND
PLUG RECEPTACLE
Table of Contents
Keyboards
Chapter 12
INTRODUCTION ......................................................................................................... 12-1
Table of Contents
Chapter Number: 12
Keyboards
INTRODUCTION
This chapter covers the NCR 6626 ATMs Keyboard Layout.
US 2 445-0715202
ITALY 445-0715203
FRANCE 445-0715204
TURKEY 445-0715205
US 3 445-0715206
INTERNATIONAL 3 445-0715208
ARABIC 445-0715209
INTERNATIONAL 445-0715210
SWITZERLAND 445-0715211
GERMANY 445-0715213
FRANCE 2 445-0715214
NETHERLANDS 445-0715216
SPANISH 445-0715218
UK 3 445-0715220
US 4 445-0715234
SPANISH 4 445-0715238
GREECE 445-0715244
SOUTH AFRICA 2 445-0715245
BELGIUM 2 445-0715258
Table of Contents
Table of Contents
Chapter Number: 13
INTRODUCTION
This chapter covers the NCR 6626 ATMs Miscellaneous Devices and Interface Board.
J3
J4
J6
J7
J8
RIO MISC_IF P6
2D BARCODE READER
1
3 5
IRED_P1
UBAR_P4 IRED_P1
UBAR_P3
UBAR_P1
Table of Contents
Operator Interface
Table of Contents
Chapter Number: 14
Operator Interface
INTRODUCTION
This chapter covers the NCR 6626 ATMs Operator Interface feature.
UOP ASSEMBLIES
DVI - D DVI - D
Table of Contents
Power Supply
Table of Contents
Chapter Number: 15
Power Supply
INTRODUCTION
This chapter covers the NCR 6626 ATMs Power Supplies.
Table of Contents
Printers
Table of Contents
Chapter Number: 16
Printers
INTRODUCTION
This chapter covers the NCR 6626 ATMs Printers feature.
1
2
6 7
8 9
10
Table of Contents
Security Enclosures
Table of Contents
Chapter Number: 17
Security Enclosures
INTRODUCTION
This chapter covers the NCR 6626 ATMs Security Enclosures.
CHANGE TOOL
KEYLOCK S & G
KEY LOCK
ESCUTCHEON
CHANGE TOOL
DIAL
SPLINE KEY
CHANGE TOOL
DIAL
SPLINE KEY
KEY
CHANGE TOOL
DIAL
SPLINE KEY
CHANGE TOOL
DIAL RING
COMBINATION
LOCK
DIAL
SPLINE KEY
CHANGE TOOL
COMBINATION
LOCK DIAL RING
DIAL
SPLINE KEY
CHANGE TOOL