Вы находитесь на странице: 1из 4

NAGUL MEERA SHAIK

Mobile: 09666316631/ 09966278686; E-Mail: salim.mechanicalsafety@gmail.com


Aspiring for challenging assignments in EHS Management with an organisation of high repute,
preferably in Manufacturing industry

Profile Summary

A dynamic professional with over 4 years of experience in Environment, Health & Safety
Management
Holds the merit of conducting refreshment training on Use of PPEs, Working at Height, Welding &
Gas Cutting Safety, Electrical Safety, Work Permit & Lockout & Tag Out Systems, etc., with examples
An expert in handling Process Safety, Emergency Plans, Mock Drills, Risk Analysis, HAZOP Studies,
EHS Audits, LTT, FLT, Ergonomics ,Staff Training and Regulatory Compliance
An expert in knowledege on Tundish, Ladle, Slide gate management and application of refractors in
steel plants.
Acquired experience in steel making process
Handling of 3 manufacturing plants and application of refractory products in steel plants.
Gained significant experience of maintaining Environment, Health & Safety in construction activities
of Thermal Power Plant such as Boilers, ESP, TG, Cooling Towers, Storage Systems, Conveyors,
Chimney Construction, Fabrication of Structures, Erecting of all major Structures & Painting, etc.
Acquired experience in HT (high tension), LT (low tension) electric lines such as pole erection,
stringing/ sagging activities, installation of transformers and shutdown procedures
Excellent knowledge in ISO:14001:2004, 8001:2007 & 9001:2008 and legal aspects such as Indian
Factories Act 1948, Environment Protection Acts & The Indian Electricity Act
Knowledge of Hierarchic Controls of OSHAS such as Elimination, Substitution, Engineering &
Administrative Controls and Personal Protective Equipment's
Conducting safety internal audits & risk assessment; implementing environment, health & safety
management system
Executing the accident analysis to find out the probable cause of accidents; organising toolbox
meetings and EHS induction training at site
Preparation and implementation of project specific HSE plans to ensure safe working practices and
adequate emergency response
Heavy lifting procedure, preventions and hazards while lifting activities
Overseeing & safeguarding the machines & working at height; developing onsite & offsite
emergency plans
Inspecting machinery, equipment and workplaces & ensuring suitable protective equipment, such as
hearing protection, dust pollution protection, PPE are provided and is being used correctly
Ensuring workplaces comply with environment, health & safety legislation & investigating complaints,
serious harm incidents & accidents
Conducting HAZOP studies for four projects and reviewing the compliance to the report at regular
intervals
Advising the purchasing & store departments for ensuring high quality and availability of personnel
protective equipments; guiding the activities of Project EHS Advisors, Filed Safety Supervisors,
Officers and Safety Assistance
Organising campaigns, competitions & other special emphasis programmes to promote EHS in the
workplace
Advising line management in preparing EHS Risk Assessment for the new activities
Overseeing the deployment OS safety supervisors and stewards

Organisational Experience

Since Dec14: Vesuvius India Ltd, Visakhapatnam, and A.P. as Sr. HSE Engineer Ceramic
Refractory

Role:
Conducting disseminating & communicating HSE Policy & Management System requirements
manufacturing personnel
Sharing necessary advice, information & support in the implementation of the EHS Management
System requirements and plan
Organising & conducting HSE Level -1, Level -2 & Level -3 Training Programs and initiating drive to
promote HSE awareness & performance
Responsible for improving safety audits:
o Monitoring of Line PPS board and encourage the operators to write the observations at shop floor.
o Conduct training and assessments to identify Safety improvement opportunities during safety
audit.
o Reporting the Dangerous occurrences and closing with 8D PPS tool and learning lessons from
DOs.
o Conducting investigation of all incidents/dangerous occurrences and recommend appropriate
corrective action by8D PPS tool.
o Participating in design of SWI for all routine activities.
o Track and analyze worker injuries and develop training programs to emphasize the importance of
workplace safety and eliminating injuries and cost
o Convening USHEC committee meeting and minute the proceedings for circulation and fallow-up
action.
o Investigation of all incidents / dangerous occurrences & recommending appropriate corrective
measures
o Creating HSE awareness through safety audits and appreciation for quality of audits
o Mock Drills and fire fighting demonstration
o Advising & coordinating for implementation of PTW fallowed by risk assessment
o And participating in meetings like Safety Committee monthly management
o safety briefing, induction, awareness & tool box talks for all employees
Delivering leadership and expertise in environment, health & safety issues
Overseeing & planning procurement of PPE & safety devices and conducting inspection before use as per
laid down norms
Inspecting and ensuring that all tools, tackles, heavy equipments are safe and up to the standard
before commencement of each jobs.
Accomplishments:
Played a key role in managing & developing new developments in HSE technologies as well as
federal, provincial & local regulation and communicating the same to the management
Successfully implemented:
o Standard work Instructions for all routine activities.
o Identifying the Safety improvement opportunities by all shop floor assistants.
o Implementation of company safety group standards and local standard as per factories act.
o Completed HSE level -l and level-all trainings
o Implemented LTT, FLT and Ergonomics standard

Mar14-Dec14: Larson & Toubro, Aligarh, U.P. as Sr. EHS Engineer - Power Transmission &
Distribution

Role:
Conducting disseminating & communicating EHS Policy & Management System requirements to site
personnel
Sharing necessary advice, information & support in the implementation of the EHS Management
System requirements and plan
Organising & conducting Internal EHS Training Programs and initiating drive to promote EHS awareness
& performance
Responsible for carrying out:
o EHS inspection of Work Area, P&M Equipments & Machineries, etc. as per the IMS requirement
o Investigation of all incidents / dangerous occurrences & recommending appropriate corrective
measures
o Audit facility for EHS compliance and arrange periodic EHS conferences for company personnel
o Mock Drills and fire fighting demonstration
o And participating in meetings like Safety Committee monthly management
o Inspection of all rigging and fire relate equipments
o safety induction, awareness & tool box talks for all employees
Delivering leadership and expertise in environment, health & safety issues
Overseeing & planning procurement of PPE & safety devices and conducting inspection before use as per
laid down norms
Inspecting and ensuring that all tools, tackles, heavy equipments are safe and up to the standard
before commencement of each jobs.
Accomplishments:
Dexterously participated in IMS internal audits especially in OHSAS 18001 & EMS 14001
Successfully implemented:
o Safety Program & Procedure at the sites
o Safety sign boards and posters
o Demonstrated abilities in organising EHS awareness through PEP talks With the coordination with
Site Engineer

May13-Mar14: Godrej & Boyce MFG Co. Ltd., Punjab as Safety Officer - Electricals &
Electronics

Role:
Identified hazards, unsafe acts, near miss and unsafe conditions
Conducted Safety Training for HIRA, OEP, Fire-fighting, Near Miss, Hazard Reporting and ROR
(Register of Regulation)
Safety audits, Monitoring, Audit compliances.
Oversaw HIRA & ROR, LEAD & LAG Indicators, DSP (Dept Safety Performance)
Coordinated with Purchase & Stores Departments to ensure high quality & availability of personal
protective equipments

Accomplishments:
Successfully implemented IMS System and OHS Best Practices
Successfully trained all site engineers and supervisors on HIRA.
Played a key role in selection of contractors and safety trainings.

May12-Apr13: Petron Civil Engineering Private Limited, Punjab as Engineer Safety (EHS)

Role:
Organised induction training for all employees, refresher training once in a month
Conducted trainings on First Aid, Fire Fighting (ERT members), Fork Lift and Crane Drivers, Motor
Vehicle Drivers & Cleaners, Mock Drills & Fire Fighting Demonstrations of Employees on Safety
Systems & SOPs
o Also organised training on Hazardous Materials Handling Systems, Work Permit & Lock Out & Tag
Out System in the plant and Transport Safety to all Drivers

Jan08-Aug09: Power Mech Projects Limited, Hyderabad as Jr. Officer (EHS)

Role:
Delivered PPEs demonstrations to all employees
Organised & conducted tool box talk and PPEs inspection in working location
Carried out internal IMS audit

Accomplishments:
Received appreciation for 100% implementation of hard hat use
Served as a Safety In-charge in the team to reduced work place injuries from 80% to 10%
Dexterously participated in IMS internal audits especially in OHSAS 18001 & EMS 14001
Recognised for delivering training to Engineers on working at Height-Safety Systems and How to
Prepare Risk Assessment
Bagged Best Safety Award of the year for Zero Accidents

Professional Enhancement

Advanced Fire Safety from NIFS, Vishakhapatnam


Medallion in First Aid from St. Red Cross Society, Vishakhapatnam
NEBOSH IGC Training from Safety Catch, Kerala
Completed NEBOSH in IGC
Turbo S training,
Ergonomics training.
Risk assessment and internal safety audit training.
Work at Height from EHS Solution

Education

Pursuing ADIS from MSBTET, Nagpur


Diploma in Industrial Safety from AP State Board of Technical Education in 2013
B. Tech. in Mechanical Engineering, AP JNTU, Hyderabad in 2012
PG Diploma in Environment, Health & Safety from Annamalai University in 2012
PG Diploma in Environment, Health & Safety from Indian Institute of Entrepreneurship through NIFS,
Vijaywada in 2008
Diploma in Mechanical Engineering, AP State Board of Technical Education, Andhra Pradesh in 2007

IT Skills: Well versed with AutoCAD 2006, MS Office and Java

Personal Details

Date of Birth: 10th June, 1989


Address: H. No 21-114, Opp.; Madras Urdu School, Massed Road, West Ibrahimpatnam
Vijayawada, Krishna District, Andhra Pradesh 521456
Languages Known: English, Hindi, Telugu, Urdu and Punjabi
Location Preference: Andhra Pradesh

Вам также может понравиться