Академический Документы
Профессиональный Документы
Культура Документы
Abstract: The aim of this paper is shown some of possibilities of the industry control
system Foxboro. Control of two tanks by software tools of Intagrated Control
Configurator is presented. Process control and monitoring of the process values by
FoxDraw is designed.
1 INTRODUCTION
136-1
15th Int. Conference Process Control 2005,
June 710, 2005, trbsk Pleso, Slovakia Po-Th-6, 136f.pdf
Icon ChangeEnv enable to choose one of five layer The compound support the following functions for
of access. The highest layer of access rights is the related blocks:
SoftwEng. Environment SoftwEng enables design of
process alarm priority, alarm inhibiting,
control structure and offers tools for programming
alarm grouping
and visualisation of control strategy. To access the
SoftwEng environment: sequence status notification
1. Click the Change Env icon.-or-Choose File (from phasing for execution load levelling at
the menu bar) and then choose Change Environment. execution time.
2. Click the Environment field.
3. Select SoftwEng.
4. Click OK.
136-2
15th Int. Conference Process Control 2005,
June 710, 2005, trbsk Pleso, Slovakia Po-Th-6, 136f.pdf
We can insert suitable blocks to the new
compound or add block to the marked
compound by choosing Insert New Block from
offered functions. We can write block name and
type of block to the dialog window. Block type
user can choose from list of blocks, that can be
obtain from menu bar by select item Show and
Block_Type_Names (Fig. 6)
FoxDraw
Environment FoxDraw provides tools to design
displays for monitoring, alarming and process
control. To access FoxDraw we can choose function
Config FoxDraw (Fig. 8) from the menu bar of the
initial display of the SoftEng layer.
136-3
15th Int. Conference Process Control 2005,
June 710, 2005, trbsk Pleso, Slovakia Po-Th-6, 136f.pdf
The aim of control loop is the level in the second
tank control. The tool to control is block PIDA.
Parameters of this block enable to set alarming of the
process, values of the proportional, integral and
derivative part of controller and many others
properties. Parameter MODOPT defines type of
controller. Value MODOPT = 5 means that
controller will PID type.
Block SWCH was used to controller switching on or
switching off.
Mathematic operations were realised in block
CALCA.
To display process variables monitoring and control
the FoxDraw was used. In this environment were
designed two displays. First screen (Fig. 11) displays
two tanks and values of the input and output
Fig. 9 Library of objects variables. The value of the control setpoint can set
operator. Operator can by button MOTOR ON
switch off or switch on control of process. The trend
3 CONTROL OF TWO TANKS graph displays setpoint and output values. Parameters
of the controlled system as well as parameters of the
Control of two tanks is realised by software tools of controller can be set by button Editacia parametrov.
Intagrated Control Configurator. In the ICC was This button open second screen and operator can edit
created compound HIMISI. To the compound were parameters of the controller or system (Fig. 12). In
inserted blocks (Fig. 10)from library and each of the block PIDA were defined some of alarm
blocks was properly configure. After blocks parameters. On the Fig. 13 and Fig. 14 are shown
configuration compound executes control strategy. activated alarms. Under tank is coloured alarm text
and alarm fill of the tank.
7 CONCLUSIONS
ACKNOWLEDGMENTS
136-4
15th Int. Conference Process Control 2005,
June 710, 2005, trbsk Pleso, Slovakia Po-Th-6, 136f.pdf
I/A Series Electronic Documentation V6.5, I/A Series Electronic Documentation V6.5, FoxDraw
Integrated Control Software Concepts
I/A Series Electronic Documentation V6.5, FoxView
I/A Series Electronic Documentation V6.5,
Integrated Control Block Descriptions
136-5
15th Int. Conference Process Control 2005,
June 710, 2005, trbsk Pleso, Slovakia Po-Th-6, 136f.pdf
136-6