Академический Документы
Профессиональный Документы
Культура Документы
FEATURES
Real alternative to HID luminaires for high-power applications
Cost-effective and efficiency to maximise energy and maintenance savings
Flexibility: modular approach for high-power applications
LensoFlex2 or collimators offering high performance photometry, comfort and safety
Reflectors with thermal sensor included on the PCBA for long lasting performance
On-site photometric adjustment
Surge protection 10kV (optional)
Designed to incorporate Owlet range of control solutions: autonomous network and interoperable network
TYPES OF APPLICATION
Tunnels
Sports lighting
Large areas
Roundabouts
Industrial halls
Car parks
Roads and highways
Monuments and faades
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 1/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
DIMENSION DRAWING
SUMMARY
CONCEPT
The OMNIstar has been designed to provide an unrivalled combination of performance and flexibility for lighting areas where
high lumen packages are needed (from 30 to 120.000lm) while offering maximum energy savings.
The modular concept of optical units which enables 1, 2 or 3 modules to be grouped on the same bracket and the performing
LensoFlex2, Collimators and/or Reflectors LED engines means that the OMNIstar luminaire provides a wide range of lighting
distributions and lumen packages to meet the specifications of the area to be lit. On-site adjustment guarantees the perfect
lighting.
Recommended installation height: between 8 and 30m
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 2/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
Tightness - driver: IP 20/IP 65
Impact resistance: IK 08
INSTALLATION
Standard U bracket for direct fixation (2 x M12, 4 x M8 or 1 x M20)
On-site adjustment
Adapted bracket for Duo (2 optical blocks) and Trio (3 optical blocks) versions
Additional accessories for mounting:
o vertical mast or tube with collards for poles with a diameter of 60 and 76mm
o direct post-top mounting for a diameter up to 60mm (for single version)
o side-entry for a diameter of up to 60mm (for single and duo version)
Delivered pre-wired for easy installation (with quick connector in option)
Remote driver box for outdoor and indoor versions
Easy plug-in of the separate driver box and LED optic module with quick connectors enables the OMNIstar to take advantage
of future technological evolutions and facilitates maintenance operations
OPTICAL UNIT
FutureProof optical unit, replaceable on-site, enclosed in the housing with a removable gasket - Shore50
Protected against lens degradation by 5mm thick extra clear hardened glass
Flatbed PCB with acrylic lens overlay principle
Various photometric distributions: from motorway to large areas
CRI > 70
ULOR: 0%
ELECTRICAL
Class I or Class II
Input voltage: 120-277V - 50-60Hz
Power factor > 90% at full load
10kV surge protection
Automatic power-off at opening
OPTIONS
OWLET remote management and dimming options
Diffused glass for comfort
Back Light control system
WW & CW LEDs
Various types of mounting systems can be accommodated with tilting mechanism
IP 66 driver box with all the cables and fast connectors for an easy installation
Protection grid
Other RAL or AKZO colours
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 3/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
CONCEPT
1. Thermix for long lasting performance
The thermal management of LEDs is crucial for a luminaires reliability
To maximise effectiveness and maintain flux over time, several parameters are optimised:
Thermal compartmentalisation between the LEDs and the control gear
Direct conduction by minimising the path between the heat source and the outside
Optimised design of the external heat exchange surface
OPTIONS
1. OWLET wireless remote management dimming & control system
The luminaires are pre-programmable, wireless programmable or remotely programmable and controllable. Each
individual light point can be switched off/on or dimmed at any time. Operating state, energy consumption and
failures are reported and stored in a database with the exact timestamp and geographical location. Owlet helps
lighting managers to assure the right lighting level while reducing operating costs and maintaining a sustainable
outdoor lighting scheme. The wireless Luminaire Controllers (LuCo) exist in different types, all of them are compatible
with each other.
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 4/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
*Segment controller & Antenna + cable order number:
Equipment Order no. Description
Segment Controller 00-05-921 Segment Control
Segment Controller Cable + 00-05-922 Cable 1m
Antenna GSM/UMTS + Zigbee 00-05-924 Cable 2m
2,4GHz 00-05-927 Cable 3m
00-05-925 Cable 5m
00-05-923 Cable 7m
00-05-926 Cable 10m
Commissioning tool C777260 TMGT Wireless Handheld Tool Kit
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 5/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
The settings of the luminaire will determine:
- The temporisation: the length of time a luminaire is switched on when a presence is detected
- When the sensor is idle or in detection mode
- The inclination of the luminaire influences the scope of the detection zone
The integration of sensors into round luminaires, needs to be synchronised and oriented according to the photometry
and the motion path. Our staff is happy to help you with this analysis.
A stand-alone unit to integrate into a wireless Owlet control network; either autonomous or interoperable and
equipped w/o PIR sensor:
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 6/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
3.2 Constant Light Output
This system compensates for the depreciation of luminous flux and
to avoid excess lighting at the beginning of the installation's service
life, providing substantial energy savings.
4. Photocell
The photocell will switch on the luminaire as soon as daylight has reached a certain level. The photocell is compatible
with regular or programmable drivers. Our photocell catalogue is at your disposal should you require a particular
photocell according to your regional requirements and regulations.
5. Advanced Photometry
5.1 Back Light control
Back Light control will prevent light spill from the back of the luminaire.
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 7/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
LUMEN AND POWER DETAILS
Typical data for Neutral White (NW) LEDs (4000 K, CRI min. 70) at Tq 25 C.
Model Acronym Colour Flux Typical Luminaire Luminaire Current Typical LED
temp. code luminaire power efficacy (mA) LED Count
output (W) (lm/W) flux
(lm) (lm)
OMNISTAR OMNIOB NW 017A0 17700 161 110 350 21600 144
OMNISTAR OMNIOB NW 020A1 20600 206 100 500 25900 128
OMNISTAR OMNIOB NW 023A2 23900 228 105 500 29200 144
OMNISTAR OMNIOB NW 026A3 26800 285 94 700 33600 128
OMNISTAR OMNIOB NW 030A4 30900 322 96 700 37800 144
OMNISTAR OMNIOB NW 033A5 33600 431 78 1000 42200 128
OMNISTAR OMNIOB NW 038A6 38900 470 83 1000 47500 144
Typical data for Warm White (WW) LEDs (3000 K, CRI min. 80) at Tq 25 C.
Model Acronym Colour Flux Typical Luminaire Luminaire Current Typical LED
temp. code luminaire power efficacy (mA) LED Count
output (W) (lm/W) flux
(lm) (lm)
OMNISTAR OMNIOB WW 016A0 16500 161 102 350 20200 144
OMNISTAR OMNIOB WW 019A1 19300 206 94 500 24200 128
OMNISTAR OMNIOB WW 022A2 22300 228 98 500 27200 144
OMNISTAR OMNIOB WW 025A3 25000 285 88 700 31400 128
OMNISTAR OMNIOB WW 028A4 28900 322 90 700 35300 144
OMNISTAR OMNIOB WW 031A5 31400 431 73 1000 39400 128
OMNISTAR OMNIOB WW 036A6 36300 470 77 1000 44400 144
Typical data for Cool White (CW) LEDs (6200 K, CRI min. 70) at Tq 25 C.
Model Acronym Colour Flux Typical Luminaire Luminaire Current Typical LED
temp. code luminaire power efficacy (mA) LED Count
output (W) (lm/W) flux
(lm) (lm)
OMNISTAR OMNIOB CW 017A0 17700 161 110 350 21600 144
OMNISTAR OMNIOB CW 020A1 20600 206 100 500 25900 128
OMNISTAR OMNIOB CW 023A2 23900 228 105 500 29200 144
OMNISTAR OMNIOB CW 026A3 26800 285 94 700 33600 128
OMNISTAR OMNIOB CW 030A4 30900 322 96 700 37800 144
OMNISTAR OMNIOB CW 033A5 33600 431 78 1000 42200 128
OMNISTAR OMNIOB CW 038A6 38900 470 83 1000 47500 144
Note: The flux is an indicative average and may vary with the different optics and types of protector. Tolerance on LED flux is
7% and on total luminaire power 5 %.
The precise flux and corresponding matrix for each configuration are available on www.schreder.com
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 8/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
PHOTOMETRY
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 9/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
2258AS
Asymmetrical
Asymmetrical 65
2259AS
Asymmetrical
Asymmetrical 10
2259SY
Symmetrical
Asymmetrical 10
2260AS
Asymmetrical
Asymmetrical 40
2260SY
Symmetrical
Asymmetrical 40
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 10/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
2261AS
Asymmetrical
Asymmetrical 55
2261SY
Symmetrical
Asymmetrical 55
2261SY
Symmetrical
Asymmetrical 55
5068
Wide
5118
Medium
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 11/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
5119AS
Asymmetrical
Extra-wide
5120AS
Asymmetrical
Asymmetrical 40
5121AS
Asymmetrical
Asymmetrical 60
5125CO
Narrow beam
Narrow beam
5126CO
Medium beam
Medium Beam
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 12/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
5127CO
Wide beam
Wide Beam
5128CO
Elliptical
Elliptical beam
5136AS
Narrow
5137AS
Medium
5138AS
Medium
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 13/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
5139AS
Wide
5140AS
Medium
5141AS
Wide
6293AS
Elliptical beam
6294AS
Narrow beam
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 14/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
GEAR BOX
Outdoor remote cabinet for 1 Optical block (01) also available for 2 or 3 optical blocks
Indoor remote gear box (I1) also available for 2 or 3 optical blocks
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 15/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
CABLES
Please refer to the Cable ordering module where you can select the type of power cable and if needed a data cable
for DALI control.
The optical block (OB) is delivered with an outgoing cable (0.8m) as in the picture below. It can be connected
directly to the gear box (indoor or outdoor).
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 16/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
In case a remote gearbox or cabinet (up to 40m) is installed another cable (with connectors) must be used:
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 17/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
FIXATIONS
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 18/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
BRACKET DIMENSIONS
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 19/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
>> Accessory: vertical pole mounting kit for pole 60mm (standard bracket)
>> Accessories
Mounting kit for horizontal pole - 76-108mm
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 20/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
Mounting kit for vertical pole - 76mm
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 21/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
Bracket with 1 optical block - Surface mounted (e.g. tunnel)
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 22/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
Bracket with 2 optical blocks - vertical
pole mounting
Bracket with 2 optical blocks - large U type brackets for horizontal tube
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 23/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 24/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
Bracket with 2 optical blocks - large U type brackets for horizontal tube
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com. 25/25
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
How to create A valid ordering code for each module?
+ + + +
Go to the Ordering Data page(s) and select one code per column in order to specify the characteristics of the Optical Block.
You may choose several options. Please refer to the footnotes to check compatibility between the selected features.
Choose your Flux, Photometry and Control codes by referring to more detailled
information included in the Product Sheet.
able on www.schreder.com
To configure the ideal solution between the features you need and
the available controllers, refer to the description in the Product
sheet.
customised
requests PRODOB - AT - NW015A0 - CUSTOM - GL02 - V16D00S0 - CAZZ - C000 - F0 - PXXX - LXXX - FXXX - RAL3005M
Repeat this procedure for the other modules and select one code per column. You may choose
several options if required. Please check compatibility between the specified modules
and pay attention to the footnotes under each table in order to create a fully operational complete solution.
PRODGB - 00 - O2 - 027A1 - V02D04SE - X00 - C000 - A2AMA6AA - DXXX - LXXX - FXXX - OXXX - ZZ
example
of a valid Country:
Optical Optical
Voltage,
elec. class, Input/ Controller, Customised options (Dimming, Label,
ordering Gear ID
universal
(00) or ISO
block block dimming output photocell Options Finishing & Others) for which you Colour
(6 digits) quantity type and elec. connection and sensor (2 digits each) will receive a specific code (2 digits)
code 3166 code
(2 digits) (5 digits) protection (3 digits) (4 digits) (4 digits each)
(2 digits)
(8 digits)
MODULE CA - CABLES
PRODCA - 00 - CO - L175C
example of a
valid ordering Country: Cable
code for Cable ID
universal function Cable length
(00) or ISO (connection & type
connection (6 digits)
3166 code OB/GB) (5 digits)
cable (2 digits) (2 digits)
MODULE FI - FIXATION
PRODFI - W1 - A6 - ON
example
of a valid
ordering Fixation Fixation
ID type
Options Colour
(2 digits) (2 digits)
code (6 digits) (2 digits)
MODULE AC - ACCESSORIES
PRODAC - AG - A6 - ON
example
of a valid
ordering Accessory Accessory
ID type
Options Colour
(2 digits) (2 digits)
code (6 digits) (2 digits)
ORDERING DATA OMNISTAR Module OD
AR CW 5137AS ZZ AM RALxxxx B
Argentina Cold White CUSTOM quick-on Other RAL colour
5138AS CABLE connector Brilliant
AU 5139AS AA RALxxxx T
Australia Special labelling Other RAL colour
5140AS Textured
5141AS PXXX ZZ
Photometry Other specific
5068AS custom paint*
5118AS LXXX
Label custom
2258AS
2258SY FXXX
Finishing Colour,
vernish,
2259AS
2259SY
2260AS
2260SY
2261AS
2261SY
5125CO
5126CO
5127CO
5128CO
6293AS
6294AS
2266AS
CUSTOM*
Your Order
OMNIOB __ __ _____ ______ ____ V_ _ D__ S_ C_ __ C_ _ _ _ _ _ _ __
Example: OMNIOB-00-NW015A0-CUSTOM-GL02-V16D00S0-CA5C-C000-F0-AMA6AA-PXXX-LXXX-RAL1000 B
Notes: +++ Not all photometries available for all LED configuration please check compatibility in the OMNISTAR PRODUCT SHEET
[1] Please provide country of installation to ensure country specific settings are taken into account. Schrder will provide you the code to use (00 (universal standard) or the country's ISO code).
[2] See further Lumen and Power details table. [3] See further Photometrics table.
[4] Schrder fixtures are compatible with most controls equipment available on the market. Please contact Schrder for more information.
[5] Multiple SELECTIONS and VARIANTS concatenation possible eg. -A2-AA-P0Z0-D0W0-C0Y0-S0M0-L0H0.
*Please contact Schrder to specify your requirement. A custom requirement must be validated by Schrder and may impact the delivery leadtime.
Omnistar Product Sheet - 18/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com
Copyright 2015 Schrder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
ORDERING DATA OMNISTAR Module GB
AU O1 D04 SB AA RALxxxx T
Australia outdoor for 1 OB Custom Dimming Profile 10kV + Fuse 5x20mm Time Lag 5A Special labeling Other Ral color
Textured
AT O2 D15 SC DXXX ZZ
Austria outdoor for 2 OBs Telemanagement 10kV + Fuse 5x20mm Time Lag 6.3A Dimming profile custom Other specific paint
BE O3 SE LXXX
Belgium outdoor for 3 OBs 10 kV + Fuse Cartridge 10x38mm 4A Label custom
Type GG500V
SF FXXX
10 kV + Fuse Cartridge 10x38mm 6A Finishing Colour , vernish,
Type GG500V
SG OXXX
10 kV + Fuse Cartridge 10x38mm 10A Others
Type GG500V
Your Order
OMNIGB __ A 000A0 A ___ _000A0 ___ _ _ _ __ __
Example OMNIGB-00-O2-027A1-V02D04SE-X00-C000-A2AMA6AA-DXXX-LXXX-FXXX-OXXX-ZZ _
Notes LuCo-NXP and LuCo-ADP available only with D15 Telemanagement +++ Dali & 0-10V not available with 1000mA
[1] Please provide country of installation to ensure country specific settings are taken into account. Schrder will provide you the code to use (00 (universal standard) or the country's ISO code).
ORDERING DATA OMNISTAR Module CA
4D
4G1.5
4E
4X2.5
4F
4G2.5
5B
5G2.5
ZZ
CUSTOM CABLE
Your Order
_ _____ __ __ P_ _ __ D_ _ __ L__ __ __
Example OMNICA-BE-PC-P272C
Notes:
[1] Please provide country of installation to ensure country specific settings are taken into account. Schrder will provide you the code to use (00 (universal standard) or the country's ISO code).
ORDERING
OMNISTAR Module FI
DATA
COLOUR COLOUR
Fixation ID Fixation Options Colour
OMNIFI B1 N0 0N
Standard U type bracket No Others AKZO 900 GS
B5 A6 RALxxxx M
Wall mounting U type Large bracket SeaSide Other RAL colour
Matte
PH FXXX RALxxxx B
Vertical Pole mounting for Standard U bracket type Finishing Colour , Other RAL colour
vernish, Brilliant
PI RALxxxx T
Vertical Pole mounting for large U bracket type Other RAL colour
Textured
PJ ZZ
Post top with Large U type brakcet Other specific paint*
PK
Side entry with Large U type brakcet
W1
Tiltable braquet
W2
Fix Bracket for Surface Mount
S1
Suspended bracket
PL
Pole mounting standard 2 units
PM
Pole mounting standard 3 units
PO
Pole mounting standard 2 unit prepared for Standard U type bracket
Your Order
_ ___ A1 _ _ _ _
Example OMNIFI-W1-A6-0B
ORDERING
OMNISTAR Module AC
DATA
COLOUR COLOUR
Accessory ID TYPE Options Colour
OMNIAC AG N0 0N
Protection grid No Others AKZO 900
A6 RALxxxx M
SeaSide Other RAL colour
Matte
FXXX RALxxxx B
Finishing Colour , Other RAL colour
vernish, Brilliant
RALxxxx T
Other RAL colour
Textured
ZZ
Other specific paint*
Your Order
_ ___ A _ _ _
Example OMNIAC-AG-A6-0Z