Академический Документы
Профессиональный Документы
Культура Документы
: 5
Date: March 7, 1994 Revision Date: August 3, 2000
Supporting PQR No. (s): WITH PWHT L7593 (PRN063)
Welding Process: GTAW Type(s): Manual
JOINTS (QW-402)
Refer to WPS No. GEN for typical joint designs. This WPS may be used with or without backing.
Thickness Range:
Base Metal: Groove 3/16 thru 8 With PWHT Fillets All
Maximum Deposit Thickness Per Pass Shall Not Exceed 1/4 Inches
FILLER METALS (QW-404)
Spec. No. (SFA): 5.28
AWS No. (Class): ER90S-B9
F-No.: 6
A-No.: 5
Size of Filler Metals: 1/16, 3/32, 1/8, 5/32
Weld Metal:
Thickness Range:
Groove: 1/2 Maximum With PWHT
Fillet: All
Consumable Insert: Not Permitted
POSITIONS (QW-405) POSTWELD HEAT TREATMENT (QW-407)
NOTES:
Note 1: This WPS must be used in conjunction with WPS No. GEN.
Note 2: All passes shall be made with the addition of filler metal.
Note 3: Voltage ranges are not required by ASME IX and are given for reference only.