Академический Документы
Профессиональный Документы
Культура Документы
SL OGL NA is asphalt-free open gear lubricant for use in heavily loaded gears such as kilns and ball mills. Instead of
asphalt (bitumen), SL OGL NA contains a blend of high viscosity petroleum distillate, synthetic polymer and resins. The
advantage over asphalt is that the spent lubricant does not harden over time, greatly simplifying cleanup.
Inadequately lubricated gears can experience scuffing (momentary welding of opposing asperities) under high load. SL
OGL NA creates an effective layer of chemical and physical protection that impedes scuffing. With this protective layer in
place, the high load on the gears causes the asperities to be pushed down, thus smoothing them with minimal removal of
metal. The smoothing effect will also partially flatten out pre-existing wear damage within a few hundred hours of
operation.
SL OGL NA also combats pitting. Pitting which is caused by metal fatigue, is minimised when the load is borne by
smoother surfaces.
APPLICATIONS
Heavily loaded open gears such as kilns and ball mills.
Where lubricant meeting the specifications of major OEMs, including Falk and Metso Minerals is required.
Suitable for use in airless spray systems.
Do not use with NBR rubber seals. Viton is recommended.
BENEFITS
Wear protection and surface smoothing
Extends gear life and reduces operating expenses. The need for special running-in compounds is eliminated.
Easy cleanup
The non-asphaltic base remains soft. It flows readily from the gear guard and is easily removed.
PERFORMANCE STANDARDS
Meets the specifications of major OEMS including:
Falk
Metso Minerals
FZG
Stages passed >12
Total weight loss after stage 12 mg 26.5
PACK SIZES
Bulk, 860kg
OTHER INFORMATION
For further information on Caltex products and services call the Lubelink Advisory Service on 1300 364 169 between
8.00am and 6.00pm (EST) Monday to Friday.
Information in this publication is accurate at the time of printing and reasonable care has been taken to ensure it is
complete and accurate. However, this information is subject to change (such as when formulations or usage and storage
information changes). Please visit www.caltex.com.au for the latest product information. Independent advice should be
sought before taking any action in reliance on the information in this publication, and Caltex Australia Limited and its
related bodies corporate accept no liability for any reliance on this publication's content.