Академический Документы
Профессиональный Документы
Культура Документы
1
I. Install Data Transfer Line Driver
1. Double clickCP210x_VCP_Win_XP_S2K3_Vista_7.EXEinstall as
administrator. At WIN7 System, please select the icon and right click,
2
3.Click Next>.
3
5.Select as the following, choose the Launch the CP2102x VCP Driver
4
7. After installing, it will hint Installation completed successfully as
following.
8.Connect the data transfer line with the Computer USB Port.
9.The computer will hints as the following pictures, and inform that the
5
II. Export the surveying data (*.MEA) to the computer.
1. Install the battery of the equipment (make sure that the capacity of the
battery is more than half), then connect the equipment with the
6
3. Serial port chooses the number COM3 when installing hints you.
4. Press the power button to start the equipment, then press MENU
7
4. Press 3 button to select the file to export.
choose the original surveying data file *.MEA, then press ENT
button to confirm.
8
6. Press up and down button to select the file you need to be exported
9
7. On the computer, press Receive button as the following picture.
exporting, it will show you how many data you have exported.
9. On the computer it also will show you how many data you have
received.
10
10. After received the data, click Output button, then it will enter the
11
11. Choose the format of the coordinate you need to be exported, then
clickExport button, if you need preview the data, choose the check box
of Preview the data. Type the name in the dialogue pop-up, then click
12
13
III.Export the surveying data (*.COO) to the computer.
1. Reference to the steps 1-6 of export the surveying data (*.MEA)
to the computer.
2. This time we choose the original surveying data file *.COO, press up
and down navigation key to select the file type you want, then press
14
3. Press up and down button to select the file you need to be exported
15
4.On the computer, press Input button as the following picture.
16
5.Choose the format of the coordinate you need to be exported, then click
Ixport button, if you need preview the data, choose the check box of
Preview the data. Type the name in the dialogue pop-up, then click
17
6.Select Sendbottom.
exporting, it will show you how many data you have exported.
18
4. On the computer it also will show you how many data you have
received.
19
IV. Creating Coordinate data file on the computer.
1. Run the data transfer software, right click the mouse, then select
2. At the data editing interface, you can click the enter box to enter the
Point Name, E,N, Z, and PCODE, you must enter all the information.
20
3. If you need to edit next data, you can click Add button, and if you
box
21
4. If you dont need one of the data, you can select that data, then click
5. If there are many data, you can use the Search function to enter the
22
6. After editing, click Return turn to get back on the main interface,
then you can import the data to the equipment or save on the computer.
23
V. Import coordinates data on the computer to the instrument.
1. The way to connect the computer and the equipment is the same as
before said.
2. Press the MENU button enter the menu interface, press 3button to
24
4. If there is no .COO file to choose, or you want to save these data in
5. Then enter the file name in the entering box, press F4 button to
25
6. Then select the file you just built, press F4 button to confirm.
26
8. As for to the file that you already have, after running the data transfer
software, right click then it will pop up menu to select Coordinate file,
27
9. Select the Coordinate format you want to import, then click Import
button, then choose the file you need to open, click Open button.
28
11. On the equipment, press F4 button, then it will show the data
28
12. On the computer, it will also show what data you have imported.
29
VI.Release notes
Version V1.0.6 (Built 120 614) increasing the excel copy and paste
function, fix the display format of the export dxf, explain below:
30
2. You can then paste to excel.Cation:From left to right order is Point
Name,E,N,Z,CODE.
3.It can also copy the data from excel.Cation:From left to right order is
Point Name,E,N,Z,CODE.
31
4. Then paste the data for the coordinates of the software or code files
5. Correction after export dxf display format, and can view the coordinate
32