Академический Документы
Профессиональный Документы
Культура Документы
2. HAZARDS IDENTIFICATION
Page 1 of 9
MATERIAL SAFETY DATA SHEET
SANAFOAM VAPOROOTER II Part A Metham Sodium & Part B Dichlobenil
Date of Issue: 12 January 2007
VHigh > 60%, High 30-60%, Med 10-29%, Low < 10% (w/w)
Page 2 of 9
MATERIAL SAFETY DATA SHEET
SANAFOAM VAPOROOTER II Part A Metham Sodium & Part B Dichlobenil
Date of Issue: 12 January 2007
Hazchem Code: 2X
Page 3 of 9
MATERIAL SAFETY DATA SHEET
SANAFOAM VAPOROOTER II Part A Metham Sodium & Part B Dichlobenil
Date of Issue: 12 January 2007
National Exposure No exposure standards have been assigned by NOHSC for this
Standards: specific material.
Engineering Use in well ventilated area. Use with local exhaust ventilation or
Controls: while wearing organic vapour respirator or air supplied mask.
Keep containers closed when not in use.
Page 4 of 9
MATERIAL SAFETY DATA SHEET
SANAFOAM VAPOROOTER II Part A Metham Sodium & Part B Dichlobenil
Date of Issue: 12 January 2007
Chemical Stability: Metham sodium solution corrodes copper, zinc and their
alloys. On contact with ordinary steel, it rapidly forms a black
precipitate. Reacts with acids to evolve hydrogen sulphide
and methylisothiocyanate. Decomposes on significant
dilution in water or heating to form methylisothiocyanate.
Conditions to Avoid: Keep away from sources of ignition.
Incompatible Avoid copper, zinc and their alloys. Avoid acids.
Materials:
Hazardous Decomposes on heating, emitting toxic fumes including those
Decomposition of hydrogen sulphide.
Products: Nitrogen and carbon oxides may also be formed on heating.
Hazardous Reactions: Hazardous polymerisation will not occur.
Page 5 of 9
MATERIAL SAFETY DATA SHEET
SANAFOAM VAPOROOTER II Part A Metham Sodium & Part B Dichlobenil
Date of Issue: 12 January 2007
No adverse health effects expected if the product is handled in accordance with this
Material Safety Data Sheet (MSDS) and the product label.
Health Effects from Likely Routes of Exposure if the product is mishandled and
overexposure occurs:
Ingestion: Swallowing can result in nausea, vomiting, diarrhea,
abdominal pain, chemical burns, sleepiness, cardiac and
respiratory disorders, renal lesions and shock. Effects may
be worse where the consumption of alcohol is also involved.
Skin Contact: Contact with the skin will result in moderate irritation. Will
have a degreasing action on the skin. Repeated or
prolonged skin contact may lead to allergic contact
dermatitis. A skin sensitiser. Effects may be delayed. Can
be absorbed through the skin, effects as indicated under
Ingestion.
Oral Toxicity: LD50 rat: 896 mg/kg LD50 rat: > 1166 mg/kg
Dermal Toxicity: LD50 rat: > 2,000 mg/kg LD50 rat: > 2,000 mg/kg
Inhalation Toxicity: LC50 rat: > 26 ppm (8 hours) LC50 rat: > 3.3 mg/L (4 hours)
Eye Irritation: Irritant to rabbit eyes Slight irritant to rabbit eyes
Page 6 of 9
MATERIAL SAFETY DATA SHEET
SANAFOAM VAPOROOTER II Part A Metham Sodium & Part B Dichlobenil
Date of Issue: 12 January 2007
Individual Ingredients: Following ecotoxicity data for Following ecotoxicity data for
the active ingredient Metham the active ingredient
Sodium in Part A: Dichlobenil in Part B
LC50 (96 h): 35.2 mg/L LC50 (96 h): 7.8 mg/L bluegill
rainbow trout sunfish
NOEC (96 h): 0.464 mg/L LC50 (96 h): 8.38 mg/L
rainbow trout rainbow trout
Daphnia Toxicity: LC50 (48 h): 2.34 mg/L LC50 (48 h): 6.2 mg/L
Daphnia magna Daphnia magna
NOEC (48 h): 0.976 mg/L
Daphnia magna
Page 7 of 9
MATERIAL SAFETY DATA SHEET
SANAFOAM VAPOROOTER II Part A Metham Sodium & Part B Dichlobenil
Date of Issue: 12 January 2007
UN Number: 3267
Hazchem Code: 2X
Page 8 of 9
MATERIAL SAFETY DATA SHEET
SANAFOAM VAPOROOTER II Part A Metham Sodium & Part B Dichlobenil
Date of Issue: 12 January 2007
SUSDP: Schedule 6
This MSDS summarises at the date of issue our best knowledge of the health and
safety hazard information of the product, and in particular how to safely handle and use
the product in the workplace. Since Drainchem Pty Ltd cannot anticipate or control the
conditions under which the product may be used, each user must, prior to usage,
review this MSDS in the context of how the user intends to handle and use the product
in the workplace.
Our responsibility for products sold is subject to our standard terms and conditions, a
copy of which is sent to our customers and is also available on request.
END OF MSDS
Page 9 of 9