Вы находитесь на странице: 1из 3

Reza Daliri – Offshore Installation Manager (OIM)

Permanent Residency Address: 25 Restwell Crescent, North York, M2K 2A1, Ontario, Canada
Cell (Can):+1-416-879-1516, Tel(H.UAE):+971-6-5557836, Email (P): m_r_daliri@yahoo.com
Now working in UAE & my contacts are: Mobile:+971-50-9683833, Email (W): daliri@kitoenterprises.ae

Summary of Qualifications: 20 years of successful experience in Marine and Offshore Engineering


• Worked for 10 years as Offshore Pipeline Engineer & Installation Manager in rigid & flexible
underwater pipelaying (incl. all respective subsea support works) and as Offshore Installation
Engineer & Manager in installation of fixed steel oil & gas offshore platforms worldwide. Well
familiar with the respective base data, codes, documents, methodology and common practice of many
offshore companies, 3rd parties and subcontractors. I have offshore work experience in Netherlands,
Iran, South Korea, UAE & India with recent work experience in Persian Gulf & Arabian Sea in India.
• Worked for another 10 years as Structural Engineer & Naval Architect. Managed shipyard
offshore and marine fabrication works and designed and supervised structural facilities of 2 shipyards
and 14 various marine and offshore vessels (all under international codes and classified).
• For both subsea pipeline and offshore platform installation projects, I can provide expert
engineering, management and operation services including preparation of detail proposals, tenders
and presenting to clients; preparing of all pipeline and platform installation engineering calculations
and checking of detail engineering; writing and checking reports, specifications and developing
drawings; consulting, problem solving, risk assessments; management of own time, medium sized
teams and projects and client interface.

Education:
PhD Doctor of Philosophy in Civil Engineering (Offshore Hydrodynamics), (1997)
The University of Melbourne, Parkville 3052, Victoria, Australia.
M.A.Sc. Master of Applied Science in Naval Architect & Offshore Technology, (1989)
B.Sc. Bachelor of Engineering in Structural Engineering, (1986)
Sharif University of Technology, Azadei Ave., Tehran, Iran.

Professional Experience
Feb.2007-Ongoing. Kito Enterprises LLC, #1607 Al Durrah Tower, Sharjah, UAE
Engineering and Proposals Manager of offshore pipelaying and heavy lift projects. I design or
review all pipelay installation engineering documents and manage technical & contractual
interfaces with subcontractors. I have finished full conceptual design of conversion of vessel
Persian Pearl to a double joint main and piggy back line pipe layer. Updated load charts of the
main crane of DP3 C Master (X-Jascon5) based on the vessel RAO and DAF. I performed
engineering repair assessment of Glob Pearl jack up rig; and well familiar with ABS-MODU
code and SNAME5-5A for jack up design. As Lead Subsea Pipeline Engineer I have set up the
installation engineering department and prepared or reviewed all respective analysis, procedures,
dossiers etc. So far in this company established for only 3 years we have successfully finished the
176Km of 32” pipelaying of South Pars phases 9&10, 288Km of 32” Sirri-Assaluyeh pipeline
and 8.4Km of shore pulling of 32” South Pars phases 17&18. Now managing the 4.5” & 32”
pipeline installation engineering of South Pars phases 12, 15 & 16 (with length about 200Km
each) and detail engineering review of 10 drilling jack up rigs(300’, 350’ and 400’).

Nov.2004-Feb.2007. Iranian Offshore Engineering and Construction Co.(IOEC), No.28, Gharani St.,
Tehran, Iran. And IOEC Project Office: Fourtune2000 Buil., Bandra Kurla Complex, Mumbai, India
As Offshore Installation Engineer and Manager of ONGC-RPPM Project in Mumbai High
Field, I successfully managed detail and installation engineering and pipelaying of 26 rigid and 7
flexible underwater pipelines, their 52 stalking risers & 14 I Tubes and repair and hook up of 33
offshore platforms. As Operation Manager finished hook up, commissioning and miscellaneous

Curriculum Vitae of M.R.Daliri Page 1 of 3


modifications of 28 well platforms and 4 Process Platforms. I was directly in charge of the
respective subcontracts including Pipeline Engineering, Marine Agency, Pipeline Grouting, Free
Span & Crossing Correction, Riser & I Tube Installation, Man Power Supply, Third Party
Inspection, Underwater Pipeline Surveys, Platform Hook Up, Misc. Modifications &
Commissioning; Charter Hire of Tugs, Supply Vessels, DP-DSV, Hook Up & Accommodation
Barges; Pipeline & Topsides Detail and Installation Engineering, NDT Services, Hydro test,
Air/Mix Gas/SAT Diving etc. In this 167MUSD EPCI project our team have managed DP3 pipe
layer, team of 37 office employee, 800 worker offshore and operation of 18 ships & received
ONGC safety certificate for 4.6 million safe man-hours offshore work without lost time incident.

March.2002–2003. Statoil & PetroPars Consortium; No.255. Mirdamad Ave., Tehran.


Offshore Technical Interface Coordinator of pipelaying, topsides, jackets, drilling & SPM
facilities of phases 6, 7 and 8 of 420MUSD South Pars project with Onshore for technical
interfaces. Also I was an Active Member of HSE Committee in South Pars phases 6, 7 & 8.

March.1998–2002, Part Time. Amir Kabir University, Faculty of New Technologies, Tehran, Iran.
Lead Hydrodynamician & Project Coordinator for numerical simulation and motion analysis
of hydrodynamic loading on Abouzar1200 heavy lift offshore crane vessel. Instructor of “Ship
Technology”, “Wave Theory” and “Structural Analysis” courses. Supervision of M.Sc. research
students in subjects such as “Optimization of a jack up platform for gulf region”, “Mooring
analysis of crane vessels”, “Float over barge design”, “HLV Crane Test Barge Design”, “Launch
Barge Design”, “Pipelayer Design” and similar titles in offshore engineering.

Sep.1996 – Dec.2000 Iranian Offshore Engineering and Construction Company (IOEC), No. 28,
Gharani Ave., Tehran, Iran and IOEC Subsidiary Dena Offshore Installation Co., No.50, Sepand St.
1. Operation Manager of offshore marine spread of IOEC. Duties include daily management,
manning, repair and maintenance of all IOEC offshore marine spread, updating their
documents and as built drawings. Also worked as Installation Engineer of A12 platform of
Abouzar Extension project; Naval Architect & Designer of two 2000 tones multipurpose
deck cargo and offshore crane test barges. As Lead Pipeline Installation Engineer
successfully finished design of the pipeline firing line for conversion of Abouzar1200 to
single joint main line/piggy back line pipe layer.
2. Lead Installation Engineer and Operation Manager of SPD1, SPD2, SPP1, SPQ1, SPF1 &
SPF2 platforms and bridges of phase 1 of South Pars and A15-A19 platforms of Abouzar
projects. Duties include: project break down, cost analysis, contracts negotiation & draw-up,
bid analysis, preparation of fabrication scopes of work; design and supervision of load out,
transportation, launch, lift and installation of platforms; technical coordination with Clients
and Sub-Contractors from different nationalities (i.e. Engineering, Diving, Survey,
Positioning, ROV, NDT, Marine Warranty Surveyor, Grouting, Man Power Supply, Quality
Control, Marine Transport etc.); Design/review of installation engineering documents (i.e.
structural analysis; lift, load out & launch analysis; jacket & deck transportation analysis;
mooring & ballast analysis; jacket upending & installation analysis; pile monitoring &
drivability analysis; planning & progress control etc.); Inspection of onshore and supervision
of offshore steel fabrication sites and offshore construction vessels; preparation of RFQ’s,
procedures, analysis reports and other paper work.
3. Lead Project Engineer for supervision of installation engineering, HLV crane test, pile
drivability studies, suitability study and purchase of hydraulic hammers at Netherlands and
design of pile internal lifting tools and diamond cutting tools at Italy.

Curriculum Vitae of M.R.Daliri Page 2 of 3


March, 1992-September, 1996, Part Time. Department of Civil and Environmental
Engineering, the University of Melbourne, Parkville 3052, Victoria, Australia.
Research Assistant in the field of Hydrodynamics and Tutor for the laboratory of Mechanics of
Solids and Fluids and for Fortran/C programming, data acquisitioning/processing etc.

June, 1990 – March, 1991. Delta Sazeh Engg Co., No. 342, Sattarkhan Ave., Tehran, Iran. In
this position I have managed 45 employee in office and 280 in workshop.
Project and Engineering Manager of various structural and marine projects. Designed and
supervised steel construction and piping of multi-purpose barges, passenger landing crafts, work
boats, steel fishing vessels; various size air/ground steel fuel storage tanks, Jack up jetty, navy
patrol vessels all under approval of international classification societies.

Feb. 1986 – July 1989. Persian Gulf Shipbuilding Corp.(PGSC). Bandar Abbas, Iran.
Engineering Manager & Project Manager of structural, piping and marine engineering projects
at PGSC shipyard. Designed and/or supervised construction of 64m landing craft, supply vessels,
Tugs, 18000tones ship Synchro-lift and its jetties in shipyard and many ship repair works
including piping and steel works.

Additional Areas of Experience:


Well familiar with Offshore & Structural Analysis/Design and General Software’s:
GRLWEAP, CAPWAP, PDA, STRAND, OFFPIPE, SACS, ORCALAY, FORTRAN, Visual
Basic, MS. Office, AUTOCAD, MATHCAD, PRIMAVERA and MS Project.

Trainings & Short Courses:


• Offshore Project Management, Leadership, Uncertainty Analysis, Project Development,
Cost Control and Applied HSE courses in Statoil
• STCW95-Code A Offshore Trainings (Helicopter Underwater Escape Training,
Elementary First Aid, Personal Safety and Social Responsibilities, Fire Prevention &
Fire Fighting, Personal Survival Techniques),
• QC (Ultra Sonic Testing Level I/II, NDT & Industrial X-Ray Interpretation), Industrial
X-Ray Training Co., Mumbai, India
• Installation Calculations for Subsea Pipelines, Jee Limited, Abu Dhabi, UAE
• Primavera, SACS, GRLWEAP and OFFPIPE training courses in IOEC, Tehran, Iran
• MS. Office, Applied Fortran, Batch Processing, Advanced Excel, Visual Basic and Data
Acquisitioning courses in the University of Melbourne, Australia
• Offshore Engineering Workshop Courses, Monash University, Melbourne, Australia
• Offshore Installation Engineering Training, Seaway Heavy Lifting, Netherlands

Skills:
• Work/Permanent Residency/Citizenship in UAE/Canada/Iran and respective right to work
• Driving license of UAE and Canada as well as international license of Iran,
• Write and Speak English, Azari Turkish and Farsi clearly and fluently.

Membership:
• Certified member of Ministry of Housing and Urban Development of Iran, License Number
10-3-7280, issued at 11.June.1990, to practice as Professional Structural Engineer.
• Senior member of Iranian Marine Engineering Association, Mechanical Engineering Dept,
Sharif University of Technology, Azadi Ave., Tehran, Iran, Post Box: 11365-9567.
• Applied for assessment of Professional Engineering of Ontario in Canada.

Curriculum Vitae of M.R.Daliri Page 3 of 3

Вам также может понравиться