Вы находитесь на странице: 1из 1

Meusburger is the leading

manufacturer in the field of high-


precision standard parts. More than
13,000 customers all over the world
make use of the numerous advantages

Material grades
of standardisation and benefit from
the company's 50-year-experience
in working with steel. Offering an
extensive range of standard parts,
combined with high-grade products
Indicatory
Material no. Designation analysis Strength Character Application in the field of workshop equipment,
DIN: S 355 J2 (St 52-3) C 0.22

Structural steel for common applications in tool, mould and Meusburger is the ideal partner for
1.0577 AFNOR: A 52 FP Si
Mn


0.55
1.60
550 N/mm
unalloyed, with good weldability machine construction
AISI: A738

DIN: C 45 U tool making, moulds, jigs and fixtures.


C - 0.45 Tool steel unhardened parts for mould and jig construction or
1.1730 AFNOR: XC 48 Si
Mn
- 0.30
- 0.70
640 N/mm
unalloyed, suitable for flame hardening plates and frames for tools and dies
AISI: 1045

e
C - 0.42

u
DIN: X 42 Cr 13
1.2083 AFNOR: Z 40 C 14
AISI: 420
Si
Mn
- 0.40
- 0.30 780 N/mm
Steel for through hardening
low corrosion, high-alloy
cavity plates and inserts for the processing of plastics,
mainly when corrosive plastic melts are being used
CD c a t a l o g
u e
Cr - 13.00

t a l o g
1.2083 ESU
(ESR)
DIN: X 42 Cr 13
AFNOR: Z 40 C 14
C
Si
Mn
- 0.42
- 0.40
- 0.30 780 N/mm
Steel for through hardening
low corrosion, suitable for mirror polishing,
cavity plates and inserts for the processing of plastics,
mainly when corrosive plastic melts are being used
Online ca
AISI: 420 ESR Cr - 13.00 electro-slag remelted, high-alloy
C - 0.33
Si - 0.30
DIN: X 33 CrS 16 Tool steel
Mn - 0.80 plates for corrosion resistant mould tools and die sets;
1.2085 AFNOR: Z 35 CD 17.S Cr
Mo
- 16.00
- 1.20
1080 N/mm pre-toughened, corrosion resistant, with
moulds for processing corrosive plastics
AISI: 422+S S - 0.06 good cutting properties, high-alloy
Ni - 0.30

DIN: 21 MnCr 5 C - 0.21


Si - 0.25 Steel for case-hardening
1.2162 AFNOR: 20 MC 5 Mn - 1.25 660 N/mm
alloyed
moulding plates and machine parts
AISI: 5120 Cr - 1.20

DIN: 115 CrV 3 C - 1.18


Si - 0.25
AFNOR: 100 C3 Mn - 0.30 Cold-work steel
1.2210 UNI: 107 CrV 3 KU Cr - 0.70 740 N/mm
alloyed, wear-resistant
core pins, punches, small turned parts
Ni - 0.10
AISI: L2 Ti - 0.20

DIN: 40 CrMnMo 7 C - 0.40


Si - 0.40 Tool steel
AFNOR: 40 CMD 8
1.2311 UNI: 35 CrMo 8 KU
Mn
Cr
-
-
1.50
1.90
1080 N/mm alloyed and pre-toughened, ideal for moulding plates, inserts and high-tensile machine parts
Mo - 0.20 nitriding and polishing
AISI: P20
C - 0.40
DIN: 40 CrMnMoS 86 Si - 0.40 Tool steel
plates for mould tools and dies with increased
1.2312 AFNOR: 40 CMD 8.S Mn
Cr
-
-
1.50
1.90 1080 N/mm alloyed and pre-toughened, good
requirements on strength
AISI: P20+S Mo - 0.20 cutting properties
S - 0.06

DIN: X 38 CrMo 16
C - 0.36 Tool steel
AFNOR: Z 35 CD 17
1.2316 UNI: X 38 CrMo 16 KU
Cr
Mo
- 16.00
- 1.20
1010 N/mm pre-toughened, corrosion resistant, moulds for processing corrosive plastics
polishable, high-alloy
AISI: 422

DIN: X 38 CrMoV 51 C - 0.38


Si - 1.00
AFNOR: Z 38 CDV 5 Hot-work steel moulding plates and inserts for die casting
1.2343 UNI: X 37 CrMoV 51 KU
Mn
Cr
-
-
0.40
5.30 780 N/mm
high-alloy (Al, Mg, Zn etc.) and injection mould tools
Mo - 1.20
AISI: H11 V - 0.40

DIN: X 38 CrMoV 51 C - 0.38


Si - 1.00 Hot-work steel
AFNOR: Z 38 CDV 5 moulding plates and inserts for die casting
1.2343 ESR UNI: X 37 CrMoV 51 KU
Mn
Cr
-
-
0.40
5.30 780 N/mm suitable for mirror polishing, electro-slag
(Al, Mg, Zn etc.) and injection mould tools
Mo - 1.20 remelted, high-alloy
AISI: H11 ESR V - 0.40

DIN: X 40 CrMoV 5-1 C - 0.40 Steel for through hardening


AFNOR: Z 40 CDV 5 Si - 1.00 high-temperature resistant, high temperature standard material for hot-work tools, extrusion moulds,
1.2344 UNI: X 40 CrMoV 5-1 KU
Cr
Mo
-
-
5.30
1.40
780 N/mm
wear resistant, excellent thermal conductivity, dies, tools for plastic processing
V - 1.00
AISI: H13 high-alloy

DIN: X 40 CrMoV 5-1 C - 0.40


Hot-work steel
1.2344 ESU AFNOR: Z 40 CDV 5 Si
Cr
-
-
1.00
5.30 780 N/mm suitable for mirror polishing, electro-slag
standard material for hot-work tools, extrusion moulds,
(ESR) UNI: X 40 CrMoV 5-1 KU Mo - 1.40 dies, tools for plastic processing
V - 1.00 remelted, high-alloy
AISI: H13 ESR

DIN: X 100 CrMoV 5 C - 1.00 Steel for through hardening


Si - 0.30 mould plates and inserts as well as cutting punches,
AFNOR: Z 100 CDV 5 dimensional stability and high hardenability;
1.2363 UNI: X 100 CrMoV 5-1 KU
Mn
Cr
- 0.50
- 5.20 810 N/mm
wear-resistant, cold-work steel with good
wear plates and cutting dies with high requirements on
Mo - 1.10 toughness
AISI: A2 V - 0.20 cutting properties
DIN: X 155 CrVMo 121 C - 1.53
Si - 0.30
AFNOR: Z 160 CDV 12 Steel for through hardening mould plates and inserts as well as wear plates or
1.2379 UNI: X 155 CrVMo 12 1 KU
Mn
Cr
- 0.35
- 12.00 850 N/mm
wear-resistant cold-work steel cutting dies with increased wear resistance
Mo - 0.80
AISI: D2 V - 0.80

C - 0.56
DIN: 56 NiCrMoV 7 Steel for through hardening
Cr - 1.10 extrusion dies, hot-forging tools, dies for processing
1.2714 AFNOR: 55 NCDV 7 Mo
Ni
-
-
0.50
1.70
850 N/mm good high-temperature resistance
tin, lead and zinc alloys
AISI: L6 V - 0.10 and toughness

C - 0.56 Steel for through hardening, quenched


DIN: 56 NiCrMoV 7 Cr - 1.10 1350 N/mm and tempered mould inserts, cores and slides for die casting
1.2714 HH AFNOR: 55 NCDV 7 Mo
Ni
-
-
0.50
1.70 ( 43 HRC) good high-temperature resistance (Al, Mg, Zn etc.) and injection mould tools
AISI: L6 V - 0.10
and toughness
C - 0.40
Tool steel
DIN: 40 CrMnNiMo 8-6-4 quenched and tempered, with uniform
Mn - 1.50 large cavity plates with deep cavities for items such as
1.2738 AFNOR: 40 CMND 8 Cr
Mo
-
-
2.00
0.20
1080 N/mm strength even in plates and bars
bumpers or dashboards
AISI: P20 + Ni Ni - 1.10 with larger dimensions; suitable for
polishing and nitriding
DIN: 45 NiCrMo 16 C - 0.45
Si - 0.25 Steel for through hardening
AFNOR: 45 NCD 16 high-performance cavity plates and inserts; cutting and
1.2767 UNI: 40 NiCrMoV 16 KU
Mn
Cr
-
-
0.40
1.35 830 N/mm special alloy suitable for polishing, with high
bending inserts for high compressive loads
Mo - 0.25 compressive and flexural strength
AISI: 6F7 Ni - 4.00

DIN: 90 MnCrV 8 C - 0.90 Steel for through hardening


cavity plates and inserts exposed to abrasive stress;
AFNOR: 90 MV 8 Si - 0.20 dimensional stability and high hardenability;
1.2842 UNI: 90 MnVCr 8 KU
Mn
Cr
-
-
2.00
0.40
760 N/mm
wear-resistant, cold-work steel with very
cutting punches; wear plates, cutting dies and guiding
V - 0.10 plates; guiding rails
AISI: O2 good cutting properties

DIN: 16 MnCr 5 C - 0.16


Steel for case-hardening
1.7131 AFNOR: 16 MC 5 Si
Mn
-
-
0.25
1.15 660 N/mm
alloyed
guiding elements, cores and machine parts
AISI: 5115 Cr - 0.95

Si - 0.40
DIN: AlMg 4.5 Mn Fe - 0.40

3.3547 EN: ISO 5083


Cu
Mn
-
-
0.10
0.70
290 N/mm Meusburger Georg GmbH & Co KG
(depending on Aluminium alloy plates for standard moulds and jigs
(AW-5083) AFNOR: A-G4.5MC
UNI: 7790
Mg
Cr
Zn
-
-
-
4.40
0.15
0.25
thickness) Kesselstr. 42 | 6960 Wolfurt | Austria
Ti - 0.15

Si - 0.40
DIN: AlZnMgCu 1.5 Fe
Cu
-
-
0.50
1.60 540 N/mm T 00 43 (0) 55 74 / 67 06-0
3.4365 EN: ISO 7075 Mn - 0.30 Aluminium - zinc alloy plates for mould tools and dies with increased
(AW-7075) AFNOR: A-Z5GU Mg
Cr
-
-
2.40
0.23
(depending on
thickness)
high-strength, precipitation hardened requirements on strength F 00 43 (0) 55 74 / 67 06-11
UNI: 9007/2 Zn - 5.60
Ti - 0.20

sales@meusburger.com
This general information is only a recommendation for anyone to apply freely. For individual cases the buyer must make sure they purchase for the right application. If in doubt, a specialist (e.g. steel manufacturer, hardening shop) should
EN be consulted. Liability does not lie with Meusburger Georg GmbH & Co KG. www.meusburger.com

Вам также может понравиться