Академический Документы
Профессиональный Документы
Культура Документы
ACERT
SPECIFICATIONS DIMENSIONS
I-6, 4-Stroke-Cycle-Diesel
Right Side Front
EPA Tier 2 Recreational & IMO compliant
8.82 L (538.23 cu. in.) displacement
2500 rpm rated engine speed
112.0 mm (4.41 in) bore x 149.0 mm
(5.87 in) stroke
Turbocharged-aftercooled aspiration 3
Electronically governed
Heat exchanger cooled
Refill capacity
Cooling system: 47.0 L (12.4 gal)
Lube Oil system: 32.0 L (8.5 gal) 1 2
SAE NO. 1 flywheel and flywheel housing
113 flywheel teeth
Counterclockwise rotation from flywheel end
250-hour oil change interval
Caterpillar Diesel Engine Oil 10W30 or 15W40 ENGINE DIMENSIONS & WEIGHT
(1) Length to Flywheel Housing 1198.7 mm 47.19 in.
(2) Width 960.7 mm 37.82 in.
(3) Height 982.8 mm 38.69 in.
Weight, Net Dry (approx) 947 kg 2,088 lb
Note: Do not use these dimensions for installation design. See general dimension
drawings for detail (Drawing #2736022). For complete information, please refer to Spec
Sheet Wizard.
C9 ACERT
MARINE PROPULSION ENGINE
MARINE
Marine ENGINE PERFORMANCE
Engine Performance
C9 DITA
C9 TA423
ACERT
kW (567 hp) @ 2500 rpm
423 bkW (567 bhp)
E-RATING @ 2500 rpm
- DM7798-01 EPA T2R/EU
EPA-IMO RCD
CERTIFIED
E Rating (High Performance) DM7798-01
Engine Power
Engine Power
429 575
288 386
kW
hp
147 197
6 8
2140 1578
Torque
Torque
1458 1075
Nm
lb-ft
775 572
93 69
361 .594
g/kW-hr
lb/hp-hr
311 .511
BSFC
BSFC
260 .428
210 .345
800 1100 1400 1700 2000 2300 2600 800 1100 1400 1700 2000 2300 2600
Cubic prop demand curve with 3.0 exponent for Power produced at the flywheel will be within standard
displacement hulls only. tolerances up to 50C (122F) combustion air temperature
measured at the air cleaner inlet, and fuel temperature
up to 52C (125F) measured at the fuel filter base.
Power rated in accordance with NMMA procedure as
crankshaft power. Reduce crankshaft power by 3% for
propeller shaft power.
CAT, CATERPILLAR, their respective logos, ACERT, Caterpillar Yellow and the POWER EDGE trade dress, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.
TMI Reference No.: DM5826-00 2008 Caterpillar
U.S. Sourced All rights reserved.
LEHM8927-00 (9-08) Materials and specifications are subject to change without notice.
The International System of Units (SI) is used in this publication.