Академический Документы
Профессиональный Документы
Культура Документы
REDUCED COST
The Blastmaster 125 Remote Control System allows the operator to
remotely activate and deactivate the abrasive blasting pot from the nozzle,
eliminating the need for a pot tender.
ENHANCED SAFETY
OSHA requires an abrasive blasting pot to be equipped with a remote
control system, which only operates with continuous hand pressure and
deactivates upon release of the control switch by the operator (29 CFR
1910.244(b)). This remote control system meets the OSHA requirement by
providing a Fail-to-Safe configuration, which will deactivate the remote
control system in the event the operator drops or loses control of the remote
control switch.
PORTABILITY
A heavy-duty handle, 10 semi-pneumatic tires, and lifting lugs allow the
abrasive blasting pot to be maneuvered quickly and easily around the work
site.
The Blastmaster 125 Remote Control The Blastmaster 3.5 Cu.Ft. M-Series
System is a dual Fail-to-Safe Abrasive Blasting Pot steep angle, 90
configuration including a 1-1/2 inlet cone bottom provides significantly
valve, 1 outlet valve, abrasive trap, improved abrasive flow versus a 60
remote control line, and a remote cone bottom.
control switch.
KEY FEATURES
3.5 Cubic Foot Capacity
Abrasive Blasting Pot Muffler
Galvanized pipe fittings
Two lifting lugs
10 semi-pneumatic tires
Empty weight 320 lbs
Overall height 42
Fill height 42
Width 30
Depth 31
OPTIONAL ACCESSORIES
ABRASIVES WWW.MARCO.US
BLASTING 800.BLAST.IT
COATING 800.252.7847
DUST COLLECTORS 563.324.2519
ENGINEERED SYSTEMS FAX: 563.324.6258
RENTAL SALES@MARCO.US
SAFETY
SERVICE,REPAIR & MODERNIZATION
VACUUMS
Marco, Barricade, Blastmaster, Dustmaster, Spraymaster, Vacmaster, Xtreme-Duty, and Smart Box are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective ow ners.