Академический Документы
Профессиональный Документы
Культура Документы
WELL JAS-02
REVISION 0
FIRST
Drilling Departement
Received and Approved by
Pertamina EP - Asset 3
REPORT NO. C-143-09-2016 LOCATION JAKARTA LABORATORY DATED September 16, 2016
TEST RESULTS
Thickening Time at 250 deg. F. : 4 hours 29 minutes (40 Bc)
(Chandler HPHT Consistomer Model 8240 S/N 1148) 4 hours 35 minutes (70 Bc) Include 30 Minutes Batch Mix @ 90F
4 hours 37 minutes (100 Bc)
Cement/Additives/Water : Indo G B/N : N/A - From Location / Location / Fresh Water From Location
REVIEWED BY : YUSLIANA
NOTICE : This report is the property of PT BAKER HUGHES INDONESIA, Any user of the report agrees that PT B AKER HUGHES
INDONESIA. Shall not be liable for any loss or damage which result from the use of the information in the report PT BAKER HUGHES
INDONESIA make no warranties in respect to the information in the report, whether expressed or implied or for fitness for a particul ar
purpose.
This report is the property of BJ
SERVICES, and is intended for private
information of the named party. This
report nor any part thereof may not be
published or disclosed to a third party
without the written approval of PT.BJ
LABORATORY REPORT SERVICES INDONESIA
REPORT NO. C-143-09-2016 LOCATION JAKARTA LABORATORY DATED September 16, 2016
TT CHART
400 100
350
80
300
250
60
Temperature (F)
Consistency (Bc)
200
40
150
100
20
50
0 0
0:00 1:00 2:00 3:00 4:00 5:00
Time (HH:MM)
REVIEWED BY : YUSLIANA
NOTICE : This report is the property of PT BAKER HUGHES INDONESIA, Any user of the report agrees that PT
BAKER HUGHES INDONESIA. Shall not be liable for any loss or damage which result from the use of the
information in the report PT BAKER HUGHES INDONESIA make no warranties in respect to the information in the
report, whether expressed or implied or for fitness for a particular purpose.
Make Today as a Perfect HSE Day. Make Sure Nobody Get Hurt.
PT. BAKER HUGHES INDONESIA
PRODUCT CONSUMPTION & COST ESTIMATE
PERTAMINA EP - ASSET 3
JAS-02
September 16, 2016
MATERIALS REQUIREMENT
SERVICE CHARGES
PRICE COST
PRODUCTS UNIT QTY
( US.$ ) ( US.$ )
SQUEEZE JOB 1 $ 5,400.00 $ 5,400.00
TOTAL $ 5,400.00
A silicon free defoamer for the cement slurries. It is an organic compound. FP-9L Defoamer
FP-9LS is a very effective and long lasting defoamer for cement slurries. It prevents the formation of
foam or destroys the foam immediately if added when foaming has commenced.
A dark slightly viscous liquid, designed for use as cement fluid loss additives. These
materials, although applicable over a broad range of well conditions, are primarily used
FL-47LS
where high temperature and pressures are encountered. FL-67 and FL67L are applicable
from 60F (16C) to 350F (177C) at concentrations from 0.2 to 2.0% BWOC.
Gas block additive, a water suspension of tiny silica particles with average size of 0.8
microns it effectively reduce the internal permeability of the cement by chemically and
BA-58L physically blocking the slurries matrix. These include fluid loss materials and the slurries'
ability to prevent gas migration. The material is very versatile and can be used with equal
effectiveness in fresh or sea water.
A modified lignosulfonate, liquid cement retarder designed for use at circulating bottom hole
temperatures above 200F (93C). It is a black and should be stored at temperatures above
R-8L 32F (0C). Because R-8L retarder is a liquid, the amount used is measured in gallons per
one hundred sacks of cement. R-8L retarder is the primary high temperature, liquid cement
retarder of the BJ Liquid Additive System (LAS).
An anionic blend of organic acid salts. When mixed with cement it will absorb into the
cement particles and chelate the calcium ions retarding formation on CSH gels. R-21LS has
a slight dispersive action with most cements, which results in some thinning of cement
R-21LS
slurry. Due to this, better fluid loss control is generally obtained. It can be use as a retarder
with slurries prepared with either fresh water or sea`water. It used at temperature range of
120 F to 350 F.
A dark liquid and hydrocarbon odor water-based spacer, all purpose cement and mud
spacer. This spacer has been proven as effective product to prevent contamination between
MCS-W the cement and mud systems. It is is designed to be compatible with both mud and cement
systems. The sweep efficiency is caused by a thinning of the gelled mud and/or non-
dehydrated cake, and not by forming a viscous interface or clabber in either system.
Baker Hughes Plug Cement Wizard Program V1.10
Customer: PEP - ASSET 3
Service type: Squeeze Cementing
Well: JAS-02
General Data
Design date: 9/16/16 Service date: 9/16/16
Customer: PEP - ASSET 3 Customer representative: Drilling Dept. As. 3
Lease: OCSG/Legal description:
Well: JAS-02 Baker Hughes representative: Ayu Setya Ismawati
API number: Service district/Boat: Jakarta
Zone: Service type: Squeeze Cementing
Location: Job number:
County: Indonesia
State: Central Java
Casing Data
Section Depth Casing OD Casing ID Weight TVD
(m) (in) (in) (lbm/ft) (m)
Tubing Data
Section Depth OD ID Weight TVD
(m) (in) (in) (lbm/ft) (m)
1800
2000
2400
2500
3000 3000
26
0
Offset, m
1500
TVD, m
1800
2000
2400
2500
3000 3000
26
0
Offset, m
Calculation Results
When Work String is In
Pumping Sequence
DISCLAIMER NOTICE
Baker Hughes personnel will use good faith at all times in interpreting information, making recommendations,
(either written, or oral) as to the type or amount of products, equipment or services to be furnished, the
manner of performance, or in predicting results to be obtained. The recommendation and projections
given are estimates based on calculations produced by a computer model including various assumptions
regarding the well, reservoir and treatment. Due to the uncertainty of variable well conditions and the
necessity of relying on facts and supporting services provided by the Customer and its other contractors,
Baker Hughes hereby disclaims the accuracy of any chart interpretation, research, analysis, job
recommendation or other data furnished by Baker Hughes. Such data shall include the attached report, any
similar information provided electronically and any data generated through real-time monitoring. NO
WARRANTY IS GIVEN CONCERNING THE EFFECTIVENESS OF THE PRODUCTS OR EQUIPMENT
USED, RECOMMENDATIONS GIVEN OR SERVICES RENDERED. NO WARRANTIES, EXPRESS OR
IMPLIED ARE MADE AND ALL SUCH WARRANTIES, INCLUDING ANY WARRANTY OF
MERCHANTABLITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED AND
DISCLAIMED BY BAKER HUGHES.