Академический Документы
Профессиональный Документы
Культура Документы
(HTTP://WORKITAFTY.CA)
MNU
FallProtectionxam
If you do not achieve a score of 80%, you may take the exam again.
RULT
0 of 20 questions answered correctly
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Answered Review
They are warning barriers that alert workers about a fall hazard
They are set up around a work area, at least 2 metres from an unprotected edge
They consist of weighted posts, bre rope, and warning ags or signs along their entire length
What should you check when performing an inspection of your snap hook?
Check that the keeper is seated rmly on the snap hook nose
Check the locking mechanism by disengaging it and opening and releasing the keeper
Are employers required to provide proper training about ladder safety before any ladder is used?
Yes
No
Is a Fall Protection Plan necessary for situations involving the use of a boom-supported elevating work platform or
the use of a fork-mounted elevating work platform intended to support a worker?
Yes
No
Each time you use your fall protection system, you should perform a visual and manual inspection of your lifeline.
True
False
Engineering controls involve designing or modifying your work site to enclose or isolate you from the fall hazard.
True
False
The disadvantage automatic fall arresters is that your possible free fall distance is decreased.
True
False
A lifeline is a key component of a fall protection system which consists of a rope that can be vertical, horizontal, or
self-retracting.
True
False
Why must safety belts or body belts not be used as part of a fall arrest system?
The connectors of a fall arrest system will not attach securely to a body belt
A safety belt or body belt provides more protection than a fall arrest system requires
The manufacturers of body belts do not approve of work requiring fall arrest systems
Although scaolding is slow and costly to set up and take down and requires climbing and lifting to reach the
elevated work environment, what are some of the advantages of using scaolding when working at height?
It often has handrails to help prevent you from falling and injuring yourself
It is supportive and well-secured, with four anchor points (or more) on the ground
It puts you directly in front of the surface you need to work on, without awkward angles
It provides a wide, solid surface for access for multiple workers to balance on at the same time
True
False
You have been assigned a task that requires you to work at height. Generally, which of these criteria need to be
met to require you to use fall protection while completing the task?
The work area is more than 3 metres above the nearest safe surface or water.
The work area is cluttered with tools, supplies and debris left behind by other workers.
The work area is above an open tank, pit, or vat containing a hazardous material.
The work area is above machinery, or something that would cause injury if you fall onto it.
When inspecting the tagging system of a shock absorbing lanyard, you need to ensure tagging system is attached
and legible and that the date of manufacture has not passed the adopted service life policy.
True
False
If a worker is suspended in the air after a fall, is it sucient to call 9-1-1 and await the arrival of rescue services
personnel?
Yes
No
What type of fall protection should be used when your tools or other objects may fall from your work surface onto
other workers below you?
A safety net
Guardrails
In just a few seconds, you can fall a long way. How far can you fall in 2 seconds?
What are four steps to a safe and prompt rescue of a fallen worker?
If rescue is delayed, monitor the suspended worker for signs of suspension trauma
Monitor the rescued worker and ensure they are evaluated by a healthcare professional
Helmet
Anchor
Harness
Connector
Safety boots
When is it feasible to use a control zone as a method of fall protection?
When the use of other fall protection would present a greater hazard
Which of these are the steps to clean and store a full-body harness?
Wipe o all surface dirt with a sponge that has been dampened in water
Squeeze the sponge dry, then dip it in a solution of water and mild detergent
Store your harness in a clean, dry area, free of fumes, heat, UV light, and corrosive elements
(http://twitter.com/worksite
scc)
(http://facebook.com/worksi
tesafety)
(http://linkedin.com/compa
ny/worksite-safety-
compliance-centre)
Copyright 2017 Worksite Safety Compliance Centre Inc. All Rights
Reserved.
Powered by Touchstone (http://touchstonelms.com/).