Академический Документы
Профессиональный Документы
Культура Документы
BS corrigendum
Incorporating EN 33:2011
June 2013
National foreword
This British Standard is the UK implementation of EN 33:2011,
incorporating corrigendum June 2013. It supersedes BS 5504-1:1977,
BS5504-2:1977, BS EN 33:2003 and BS EN 37:1999 which are withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee B/503, Sanitary appliances.
A list of organizations represented on this committee can be obtained
on request to its secretary.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
The British Standards Institution 2013.
Published by BSI Standards Limited 2013
ISBN 978 0 580 83519 3
ICS 91.140.70
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the Standards
Policy and Strategy Committee on 30 April 2013.
Amendments/corrigenda issued since publication
Date Text affected
31 July 2013 Implementation of CEN corrigendum June 2013:
table 2 replaced
BS EN 33:2011
EUROPEAN STANDARD EN 33
NORME EUROPENNE
EUROPISCHE NORM September 2011
English Version
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 33:2011: E
worldwide for CEN national Members.
BS EN 33:2011
EN 33:2011 (E)
Contents Page
Foreword ..............................................................................................................................................................3
1 Scope ......................................................................................................................................................4
2 Connecting dimensions ........................................................................................................................4
2.1 Inlet of WC pans with independent water supply ...............................................................................4
2.2 Outlets of WC pans and WC suites ......................................................................................................6
3 Fixing dimensions for wall-hung WC pans and WC suites ............................................................ 10
4 Fixing dimensions for the seat .......................................................................................................... 11
2
BS EN 33:2011
EN 33:2011 (E)
Foreword
This document (EN 33:2011) has been prepared by Technical Committee CEN/TC 163 Sanitary appliances,
the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at
the latest by March 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3
BS EN 33:2011
EN 33:2011 (E)
1 Scope
This European Standard specifies the connecting dimensions of WC pans and WC suites regardless of the
materials used for their manufacture.
This European Standard does not apply to siphonic action WC pans and WC suites.
NOTE 1 Other connecting dimensions are permitted, e. g. special designs of WC pans, if the manufacturer supplies or
recommends the appropriate fittings.
NOTE 2 The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the
appliance, which is left to the initiative of the manufacturer.
2 Connecting dimensions
The connecting dimensions of inlets of WC pans with independent water supply shall comply with the
dimensions given in Tables 1,and 2.
4
1 Modification to 2.1 BS EN 33:2011
EN 33:2011 (E)
Replace the existing Table 2 by the following one:
"
15
Distance
Distance from
from the
the vertical plane of
vertical plane of the
the
inlet
inlet to
to the
the back
back wall of the
wall of the appliance
appliance
15 Wall-hung WC pan
Wall-hung WC pan
ff
15
45
5
BS EN 33:2011
EN 33:2011 (E)
The connecting dimensions of WC pans outlets shall comply with the dimensions given in Tables 3 to 6.
Horizontal outlet
External cylindrical part of the outlet without
i 40
grooves
Diameter of the free space around the outlet k 150
Distance between the centre line of the outlet
and the base of the appliance
NOTE Other connecting dimensions are
permitted for specific cases as, for example, WC t1 180 +15
10
pans and WC suites for children, for disabled
persons or for comfort reasons.
6
BS EN 33:2011
EN 33:2011 (E)
140 25
q1
100 25
Distance between the vertical plane Pedestal WC suite with exposed
passing through the end of the outlet horizontal outlet
and the part of the WC suite nearest to
the wall
q2 115
75 15
q3 120 25
Distance from the centre line of the Pedestal WC suite with exposed
225 25 vertical outlet
outlet and the vertical plane passing
through the part of the WC suite nearest
to the wall
120 25
q4
225 25
Pedestal WC suite with concealed
vertical outlet
7
BS EN 33:2011
EN 33:2011 (E)
q5 20 20
q6 40 20
20 20
q7
q8 30 30
20 20
q9
160 20
Pedestal WC pan with concealed
vertical outlet
q10 30 30
8
BS EN 33:2011
EN 33:2011 (E)
Table 5 (continued)
15 15
q11
15 15
q12 100
9
BS EN 33:2011
EN 33:2011 (E)
80
Thickness of the appliance around the fixing holes v
> 80b
a The sum of measured p1 and p2 tolerances should not exceed the specified limits of p3.
b > 80 is permissible provided that additional mounting parts are recommended or supplied by the manufacturer.
10
BS EN 33:2011
EN 33:2011 (E)
Dimensions
Designation Figure Symbol
mm
Diameter of holes 2 d6 15 2
Distance between the centres of holes 2 m 155 10
Distance between the centre line of holes and the front of the
2 l 430 10
bowl
Angle between the vertical plane and the point P where an arc
of length l taken from the centre line of the seat fixing holes 3a, 3b
meets the flushing cistern o
8
Angle between the vertical plane and the point P where an arc
of length l taken from the centre line of the seat fixing holes 3c, 3d, 3e
meets the wall
11
BS EN 33:2011
EN 33:2011 (E)
Key
x Distance to be specified by the manufacturer
Figure 3e Angle for floor-standing WC pans
12
This page deliberately left blank
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
About us Revisions
We bring together business, industry, government, consumers, innovators Our British Standards and other publications are updated by amendment or revision.
and others to shape their combined experience and expertise into standards We continually improve the quality of our products and services to benefit your
-based solutions. business. If you find an inaccuracy or ambiguity within a British Standard or other
The knowledge embodied in our standards has been carefully assembled in BSI publication please inform the Knowledge Centre.
a dependable format and refined through our open consultation process.
Organizations of all sizes and across all sectors choose standards to help Copyright
them achieve their goals. All the data, software and documentation set out in all British Standards and
other BSI publications are the property of and copyrighted by BSI, or some person
Information on standards or entity that owns copyright in the information used (such as the international
We can provide you with the knowledge that your organization needs standardization bodies) and has formally licensed such information to BSI for
to succeed. Find out more about British Standards by visiting our website at commercial publication and use. Except as permitted under the Copyright, Designs
bsigroup.com/standards or contacting our Customer Services team or and Patents Act 1988 no extract may be reproduced, stored in a retrieval system
Knowledge Centre. or transmitted in any form or by any means electronic, photocopying, recording
or otherwise without prior written permission from BSI. Details and advice can
Buying standards be obtained from the Copyright & Licensing Department.
You can buy and download PDF versions of BSI publications, including British
and adopted European and international standards, through our website at Useful Contacts:
bsigroup.com/shop, where hard copies can also be purchased. Customer Services
If you need international and foreign standards from other Standards Development Tel: +44 845 086 9001
Organizations, hard copies can be ordered from our Customer Services team. Email (orders): orders@bsigroup.com
Email (enquiries): cservices@bsigroup.com
Subscriptions
Subscriptions
Our range of subscription services are designed to make using standards
Tel: +44 845 086 9001
easier for you. For further information on our subscription products go to
Email: subscriptions@bsigroup.com
bsigroup.com/subscriptions.
With British Standards Online (BSOL) youll have instant access to over 55,000 Knowledge Centre
British and adopted European and international standards from your desktop. Tel: +44 20 8996 7004
Its available 24/7 and is refreshed daily so youll always be up to date. Email: knowledgecentre@bsigroup.com
You can keep in touch with standards developments and receive substantial
Copyright & Licensing
discounts on the purchase price of standards, both in single copy and subscription
format, by becoming a BSI Subscribing Member. Tel: +44 20 8996 7070
Email: copyright@bsigroup.com
PLUS is an updating service exclusive to BSI Subscribing Members. You will
automatically receive the latest hard copy of your standards when theyre
revised or replaced.
To find out more about becoming a BSI Subscribing Member and the benefits
of membership, please visit bsigroup.com/shop.
With a Multi-User Network Licence (MUNL) you are able to host standards
publications on your intranet. Licences can cover as few or as many users as you
wish. With updates supplied as soon as theyre available, you can be sure your
documentation is current. For further information, email bsmusales@bsigroup.com.