Академический Документы
Профессиональный Документы
Культура Документы
50A02SS
Bipolar Transistor
http://onsemi.com
50V, 0.4A, Low VCE(sat) PNP Single SSFP
Applications
Low-frequency Amplifier, high-speed switching small motor drive, muting circuit
Features
Large current capacity
Low collector-to-emitter saturation voltage (resistance) : RCE(sat) typ=210m[IC=0.5A, IB=50mA]
Ultrasmall package facilitates miniaturization in end products
Small ON-resistance (Ron)
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Symbol Conditions Ratings Unit
Collector-to-Base Voltage VCBO --50 V
Collector-to-Emitter Voltage VCEO --50 V
Emitter-to-Base Voltage VEBO --5 V
Collector Current IC --400 mA
Collector Current (Pulse) ICP --800 mA
Collector Dissipation PC Mounted on a glass epoxy board (20301.6mm) 200 mW
Junction Temperature Tj 150 C
Storage Temperature Tstg --55 to +150 C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
0 to 0.02
0.8
1.4
LOT No.
LOT No.
1 2
XN
0.3
0.2 TL
0.45
Electrical Connection
0.6
3
0.07
1 2 1 : Base
2 : Emitter
3 : Collector
1
0.07
3
SSFP
2
IB1
PW=20s
OUTPUT
D.C.1% IB2
INPUT RB
VR RL
50 + +
220F 470F
Ordering Information
Device Package Shipping memo
50A02SS-TL-E SSFP 8,000pcs./reel Pb Free
No.7491-2/7
50A02SS
IC -- VCE IC -- VBE
--500 --600
A A mA A VCE= --2V
0m -25m --20
A
--15m
m
--450 --3 -
--40
A
--10m --500
--400
Collector Current, IC -- mA
Collector Current, IC -- mA
A
--350 --50m --5mA --400
--300
--1mA
C
--200
25C
--25C
Ta=75
--200
--150 --500A
--100
--200A --100
--50
IB=0
0 0
0 --100 --200 --300 --400 --500 --600 --700 --800 --900 --1000 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2
Collector-to-Emitter Voltage, VCE -- mV IT05118 Base-to-Emitter Voltage, VBE -- V IT05119
hFE -- IC VCE(sat) -- IC
1000 3
VCE= --2V IC / IB=10
7
3
--25C --100
Collector-to-Emitter 7
2
5 C
= 75
Ta
100 C
25
3
C
5
7 --2
2
5
3 --10
--1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 5 7--1000 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 5 7
Collector Current, IC -- mA IT05120 Collector Current, IC -- mA IT05410
VCE(sat) -- IC VCE(sat) -- IC
--1000 3
IC / IB=20 2
IC / IB=50
7
Saturation Voltage, VCE(sat) -- mV
5
--1000
3 7
2 5
3
Collector-to-Emitter
Collector-to-Emitter
--100 2
7
C
75 --100
5
Ta= 5 C 75C
--2 7 Ta=
3 C
5
--25
2 25C 3
25C
2
--10
7 --10
--1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 5 7--1000 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 5 7--1000
Collector Current, IC -- mA IT05123 Collector Current, IC -- mA IT05124
VBE(sat) -- IC Cob -- VCB
2 10
IC / IB=20 f=1MHz
7
Saturation Voltage, VBE(sat) -- V
--1.0 5
Ta= --25C
7
75C
3
Base-to-Emitter
25C
5
2 1.0
--1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 5 7--1000 --1.0 2 3 5 7 --10 2 3 5 7 --100
Collector Current, IC -- mA IT05125 Collector-to-Base Voltage, VCB -- V IT05122
No.7491-3/7
50A02SS
f T -- IC Ron -- IB
1000 100
VCE= --10V 7 f=1MHz 1k
5 IN OUT
Gain-Bandwidth Product, f T -- MHz
7 3 1k
2
ON Resistance, Ron --
5 IB
10
7
5
3 3
2
1.0
2 7
5
3
2
100 0.1
--1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 5 7--1000 --0.1 2 3 5 7 --1.0 2 3 5 7 --10
Collector Current, IC -- mA IT05121 Base Current, IB -- mA IT06093
PC -- Ta
250
Collector Dissipation, PC -- mW
200 M
ou
nt
ed
on
ag
150 las
se
po
xy
bo
100 ar
d(
20
3
01
50 .6m
m
)
0
0 20 40 60 80 100 120 140 160
Ambient Temperature, Ta -- C IT05045
No.7491-4/7
50A02SS
No.7491-5/7
50A02SS
0.5
0.5
1.2
0.45 0.45
0.45 0.45
No.7491-6/7
50A02SS
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLCs product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.7491-7/7