Вы находитесь на странице: 1из 2

PosiSet Mechanical

Plug-Back Tool
The PosiSet* mechanical plug-back tool Applications
(MPBT) is used in rigless through-tubing
Seal off nonproductive zones
recompletions. By using a mast or a crane,
recompletions can be accomplished without Seal off water-producing zones
the cost of a workover rig. below productive zones
The PosiSet anchored elastomeric plug is Base for a sand plug
run through tubing and set in casing to plug Low-pressure acid base plug
off fluid flow in the casing below the plug.
Positive depth control plug
The casing seal is similar to that produced
by a cast-iron plug, but instead of an explosive
charge, a downhole electric motor within the
MPBT Setting Unit (MPSU) is used to contract
the elastomer sealing assembly to form a firm
seal against the casing wall. The expansion
ratio is typically 3:1. An anchoring system
keeps the tool in place while cement is placed
on top of the plug to a height of 10 ft [3 m]
or more to provide additional differential
pressure.
The PosiSet plug is drillable. The smallest
plug can withstand 25,000-lbf [111,205-N]
force. The largest (958-in. [24.45-cm]) plug can
withstand 90,000-lbf [400,340-N] force. If
the wellbore pressure at setting depth is less
than 1,000 psi [7 MPa], a special tool is used
to aid the setting process of the PosiSet plug.
PosiSet plugs can be set in open hole, across
perforations, and at gravel-pack screens.
The Positive Displacement Dump Bailer is
used to place the required cement plug on
top of the PosiSet plug. Release of a weight
bar displaces cement from the bailer sections.
The plug can be pressure tested 24 hr after
the last bailer run, when the cement is at
approximately 90% of its ultimate compres-
sive strength. The temperature rating of the
Positive Displacement Dump Bailer is 302F
[150C].
Mechanical Specifications
MPSU-BA MPSU-CA
Temperature rating 350F [177C] 350F [177C]
Pressure rating 20,000 psi [138 MPa] 20,000 psi [138 MPa]
Borehole sizemin. 412 in. [11.43 cm] 412 in. [11.43 cm]
Borehole sizemax. 758 in. [19.37 cm] 958 in. [24.45 cm]
Outer diameter 1.71 in. [4.34 cm] 2.125 in. [5.40 cm]
Length 20.5 ft [6.25 m] 21 ft [6.40 m]
Weight 89 lbm [40 kg] 129 lbm [58 kg]

www.slb.com/oilfield
PR_04_022_0 Schlumberger
August 2004 *Mark of Schlumberger
Produced by Marketing Communications, Houston.

Вам также может понравиться