Академический Документы
Профессиональный Документы
Культура Документы
Walls
Footings 230x600mm in medium strength concrete to NBR standard and SANS 10400.
Walls are built with 90mm bricks - heights as per plan. External walls to plastered and
painted with 50mm cavity between internal and external skins with 2.5 butterfly wire ties
per square meter. All internal walls plastered with lime cement.
Brickforce in 4 layers over all openings, with precast concrete lintels to openings greater
than one metre.
26.5 Window-sills
ROOF PITCH External & Internal, smooth finished cement plaster.
1,594
Roof Construction
300 300 Cement roof tiles @ 26.5 pitch on 38x38 SAP battens at maximum 320 centres on
PLASTER & prefabricated gangnail trusses at maximum 760 c/c, fixed to 114x38 wallplates and
PAINT anchored to brickwork with 30x2mmx1m hoop iron ties, built into walls for minimum of
600mm. SABS approved underlay to tiled roof. All roof timber to be minimum Grade 5 SA
4,144
DPC NGL
Pine TAN treated. All gable ends to be tied with hoop iron built into wall for minimum
ELEVATION 1 600mm and up to two trusses away from gable to SANS 10400-L where applicable.
SCALE 1:100 Bracing as per A19 Engineer.
2,550
Eaves
300mm Open eaves overhang with 225mmx10mm painted fibre cement fascias.
230
(Carpet)
2,620
W6
All levels to be determined on site and can/may be to adjusted to the descrepancy of the
90
B.I.C ELEVATION 3 All glazing to SANS 10137 & SANS 10400-N. Printed dimensions take preference over
600
W3
BATH RM 4
2,700
90
SCALE 1:100 scaled dimensions. All work to be carried out in strict accordance to NBR and local
A (Tiles)
TV A bylaws.
7,600
7,600
2,020
In case of discrepancies the author of the plan should be contacted before proceeding
4,430
DOOR TO CLEAR REVEAL
2,160
(1200x1200)
90
4,000
1,200
W2
LOUNGE
2,320
900
(Tiles)
KITCHEN
PD26
1,600
(Tiles)
230
1,000
WM
600
230
230
W5 W6
1,
1,609
External & Internal, smooth finished cement plaster.
300 300
Roof Construction
PLASTER & Cement roof tiles @ 26.5 pitch on 38x38 SAP battens at maximum 320 centres on
4,159 DPC PAINT prefabricated gangnail trusses at maximum 760 c/c, fixed to 114x38 wallplates and
NGL anchored to brickwork with 30x2mmx1m hoop iron ties, built into walls for minimum of
600mm. SABS approved underlay to tiled roof. All roof timber to be minimum Grade 5 SA
2,550
ELEVATION 1 Pine TAN treated. All gable ends to be tied with hoop iron built into wall for minimum
SCALE 1:100 600mm and up to two trusses away from gable to SANS 10400-L where applicable.
Bracing as per A19 Engineer.
Eaves
BATHRM LOUNGE 300mm Open eaves overhang with 225mmx10mm painted fibre cement fascias.
DPC DPC
400x200 250mic DPM Rainwater Disposal
375mic DPM UNDER ALL WALLS
THICKENED Alu. gutters with 75mm PVC downpipes as per plan.
MINIMUM 150mm ABOVE FGL
FOUNDATION
600x230 600x230
Ceilings
SECTION A-A 25mm Isoboard EPS ceiling on 38 x 38 SA Pine battens at 300mm spacing and 76mm
SCALE 1:100 Rhino cornice with 155mm thick flexible polyester blanket(Isotherm).
Floors
Finished as per plan and/or client choice/building tender, on 25mm screed, on 80mm
3 concrete for ground storey, (as above) on 250 micron waterproof sheeting, on compacted
filling and sand blinding. All floor levels to be a minimum of 150mm above FGL.
230
230
1,110
BEDRM 1 NOTES:
3,160
W6
2,840
900
PLASTER & PAINT All levels to be determined on site and can/may be to adjusted to the descrepancy of the
B.I.C developer and his appointed builder. Developer to approve plan prior to submission to
(600x900)
council.
90
B.I.C
ELEVATION 3
2,840
All glazing to SANS 10137 & SANS 10400-N. Printed dimensions take preference over
W3
600
BATH RM
90
scaled dimensions. All work to be carried out in strict accordance to NBR and local bylaws.
A A SCALE 1:100
7,830
7,830
(Tiles)
2 TV 4
2,030
VP
In case of discrepancies the author of the plan should be contacted before proceeding
4,430
(1200x1200)
90
1,200
4,010
W2
LOUNGE
(Tiles)
2,320
900
KITCHEN
1,780
(Tiles) PD26
230
1,000
WM
600
230
230
1,727
External & Internal, smooth finished cement plaster.
300 300
Roof Construction
Cement roof tiles @ 26.5 pitch on 38x38 SAP battens at maximum 320 centres on
PLASTER & prefabricated gangnail trusses at maximum 760 c/c, fixed to 114x38 wallplates and
4,277 DPC
PAINT anchored to brickwork with 30x2mmx1m hoop iron ties, built into walls for minimum of
NGL 600mm. SABS approved underlay to tiled roof. All roof timber to be minimum Grade 5 SA
ELEVATION 1 Pine TAN treated. All gable ends to be tied with hoop iron built into wall for minimum
2,550
SCALE 1:100 600mm and up to two trusses away from gable to SANS 10400-L where applicable.
Bracing as per A19 Engineer.
Eaves
300mm Open eaves overhang with 225mmx10mm painted fibre cement fascias.
LOUNGE BATHRM
DPC DPC
250mic DPM Rainwater Disposal
375mic DPM UNDER ALL WALLS 400x200
Alu. gutters with 75mm PVC downpipes as per plan.
THICKENED
MINIMUM 150mm ABOVE FGL
FOUNDATION
600x230 600x230 Ceilings
SECTION A-A 25mm Isoboard EPS ceiling on 38 x 38 SA Pine battens at 300mm spacing and 76mm
SCALE 1:100 Rhino cornice with 155mm thick flexible polyester blanket(Isotherm).
Floors
Finished as per plan and/or client choice/building tender, on 25mm screed, on 80mm
concrete for ground storey, (as above) on 250 micron waterproof sheeting, on compacted
3 filling and sand blinding. All floor levels to be a minimum of 150mm above FGL.
PLASTER & PAINT
Doors & Windows
Windows top-hung aluminium, as per plan codes & elevations.
6,400
230 90 230 ELEVATION 2 Note : Safety glass to window panes larger than 1sq.m or closer than 500mm from FFL to
SANS 10137 and to comply to SANS 10400-N.
3,140 2,710 SCALE 1:100
230 90 90 230
3,140 910 1,710 Drainage
110mm Smooth uPVC Sewer pipe with minimum 1:60 fall with IL at minimum 450mm.
4,370 900 1,130 50mm 2way vent valve on start of one pipe sewer system. All sewer lines passing under
W6 structure to comply to SANS 10400-PP24 (encase in sand or concrete). All drainage to
(900x1100) comply to SANS 10400-P.
230
230
230
Electricals - as per building tender.
960
BEDRM 2 Position of Oostersee Electrical connection box on exterior wall to be determined on site.
(1200x1200)
(Carpet)
2,250
NOTES:
BEDRM 1
1,200
W2
3,160
4 All levels to be determined on site and can/may be to adjusted to the discrepancy of the
90
council.
90
B.I.C All glazing to SANS 10137 & SANS 10400-N. Printed dimensions take preference over
2,690
W3
600
BATH RM
ELEVATION 3 scaled dimensions. All work to be carried out in strict accordance to NBR and local bylaws.
90
A A
7,830
7,830
TV (Tiles)
SCALE 1:100
2,030
VP In case of discrepancies the author of the plan should be contacted before proceeding with
any construction.
4,430
2,170
(1200x1200)
90
1,200
4,010
W2
LOUNGE
(Tiles)
2,320
900
KITCHEN
1,780
PD26 (Tiles)
230
1,000
WM
600
230
230
W6 W5
(900x1100) (900x900)
485 37 VAN DER STEL STREET P.O. BOX 1399 TEL: 021 906 6770
1,215 900 1,215 900 900 785 KUILSRIVER KUILSRIVER FAX: 021 906 6775
230
4,140
90
1,710
230 ELEVATION 4 7579 7580 EMAIL : nationhousing@mweb.co.za
SCALE 1:100
230 230 230 230 ELECTRICAL HOUSE PLAN- Type 3-50 sq.m (Affordable) DATE : 2017
2,870 900 1,710
TELEPHONE POINT
PROPOSED NEW DWELLING DRAWING : Type 3-50sq.m
6,400 CEILING LIGHT POINT
FOR ......... ON ERF ...... , PROJECT : MOUNTAIN RIDGE
NATION HOUSING
1 SANS 10400-XA WATERPROOF LIGHT POINT
15 AMP PLUG POINT
MOUNTAIN RIDGE ESTATE SCALE : 1:100
HWC DETAILS:
1,768
300 300 Window-sills
External & Internal, smooth finished cement plaster.
Roof Construction
4,318
DPC Cement roof tiles @ 26.5 pitch on 38x38 SAP battens at maximum 320 centres on
prefabricated gangnail trusses at maximum 760 c/c, fixed to 114x38 wallplates and
PLASTER & anchored to brickwork with 30x2mmx1m hoop iron ties, built into walls for minimum of
2,550 PAINT 600mm. SABS approved underlay to tiled roof. All roof timber to be minimum Grade 5 SA
NGL Pine TAN treated. All gable ends to be tied with hoop iron built into wall for minimum
600mm and up to two trusses away from gable to SANS 10400-L where applicable.
ELEVATION 1 Bracing as per A19 Engineer.
SCALE 1:100
BATHRM LOUNGE Eaves
DPC DPC
250mic DPM 300mm Open eaves overhang with 225mmx10mm painted fibre cement fascias.
400x200 375mic DPM UNDER ALL WALLS
THICKENED
MINIMUM 150mm ABOVE FGL Rainwater Disposal
FOUNDATION
600x230 600x230 Alu. gutters with 75mm PVC downpipes as per plan.
SECTION A-A Ceilings
SCALE 1:100
25mm Isoboard EPS ceiling on 38 x 38 SA Pine battens at 300mm spacing and 76mm
Rhino cornice with 155mm thick flexible polyester blanket(Isotherm).
Floors
Finished as per plan and/or client choice/building tender, on 25mm screed, on 80mm
concrete for ground storey, (as above) on 250 micron waterproof sheeting, on compacted
3 6,400 filling and sand blinding. All floor levels to be a minimum of 150mm above FGL.
230
230
structure to comply to SANS 10400-PP24 (encase in sand or concrete). All drainage to
comply to SANS 10400-P.
(1200x1200)
BEDRM 1
3,460
3,140
1,200
(Carpet) NOTES:
W2
3,570
Figured dimensions takes preference to scaled dimensions.
2 All relevant levels and dimensions to be verified on site prior to construction.
All work to comply to NBR, Local Bylaws and Municipal Regulations.
90
B.I.C All levels to be determined on site and can/may be to adjusted to the descrepancy of the
developer and his appointed builder. Developer to approve plan prior to submission to
(600x900)
90
B.I.C council.
W3
600
BATH RM All glazing to SANS 10137 & SANS 10400-N. Printed dimensions take preference over
90
3,230
8,610
TV
50 bylaws.
2,230
VP ELEVATION 3
HWC IN
ROOF
(1200x1200)
4,490
1,200
W2
LOUNGE
(Tiles)
2,600
900
KITCHEN
1,780
(Tiles) PD26
120 230
1,160
WM
230
230
W5 W6
(900x900) (900x1100)
485 37 VAN DER STEL STREET P.O. BOX 1399 TEL: 021 906 6770
785 900 900 1,215 900 1,215 PLASTER & PAINT KUILSRIVER KUILSRIVER FAX: 021 906 6775
230 90 230 7579 7580 EMAIL : nationhousing@mweb.co.za
1,710 4,140
ELEVATION 4 ELECTRICAL HOUSE PLAN- Type 4-55 sq.m (Affordable) DATE : 2017
230 230 230 230 SCALE 1:100
1,710 900 2,870 TELEPHONE POINT
PROPOSED NEW DWELLING DRAWING : Type 4-55 sq.m
6,400 CEILING LIGHT POINT
FOR .......... ON ERF ...... , PROJECT : MOUNTAIN RIDGE
NATION HOUSING
SANS 10400-XA WATERPROOF LIGHT POINT
1 HWC DETAILS: 15 AMP PLUG POINT
MOUNTAIN RIDGE ESTATE SCALE : 1:100
PIPING 15mm AND 22mm CLASS 1
FLOOR PLAN COPPER TUBE
HWC KWIKOT ECONO STD GALV. 150L
15 AMP UNDERCOUNTER
MOUNT PLUG POINT
SCALE 1:100 AREA HOUSE : 55.10 sq.m GEYSER. 15 AMP PLUG POINT 2000mm HIGH
LAGGING (R=1) ON ALL EXPOSED PIPES
WALLS EXT. 230 CAVITY
DISTRIBUTION BOARD
INT. 90 x 190 mm W2= (1.2x1.2)x2 = 2.88 sq.m
W3= 0.6x0.9 = 0.54 sq.m TV TV POINT
NOTE: W5 = 0.9 x 0.9 = 0.81 sq.m
W6= (0.9x1.1) x 2 = 1.98 sq.m
FFL ABOVE NGL TO BE TOTAL = 6.21 sq.m
STOVE CONNECTION
DETERMINED ON SITE. FLOOR AREA : 55 sq.m
MINIMUM 150mm. FENESTRATION PERCENTAGE : 11.29 % BALL FITTINGS TO ALL LIGHT POINTS
SCHEDULE OF FINISHES
Walls
26.5 Footings 230x600mm in medium strength concrete to NBR standard and SANS 10400.
ROOF PITCH Walls are built with 90mm bricks - heights as per plan. External walls to plastered and
1,744
painted with 50mm cavity between internal and external skins with 2.5 butterfly wire ties per
300 300 square meter. All internal walls plastered with lime cement.
Brickforce in 4 layers over all openings, with precast concrete lintels to openings greater
than one metre.
4,294
DPC Window-sills
External & Internal, smooth finished cement plaster.
DPC
BEDRM LOUNGE
DPC
ELEVATION 1 Pine TAN treated. All gable ends to be tied with hoop iron built into wall for minimum
600mm and up to two trusses away from gable to SANS 10400-L where applicable.
400x200 250mic DPM SCALE 1:100
375mic DPM UNDER ALL WALLS THICKENED
Bracing as per A19 Engineer.
MINIMUM 150mm ABOVE FGL FOUNDATION
600x230 600x230 Eaves
SECTION A-A 300mm Open eaves overhang with 225mmx10mm painted fibre cement fascias.
SCALE 1:100
Rainwater Disposal
Alu. gutters with 75mm PVC downpipes as per plan.
3
Ceilings
25mm Isoboard EPS ceiling on 38 x 38 SA Pine battens at 300mm spacing and 76mm
6,300 Rhino cornice with 155mm thick flexible polyester blanket(Isotherm).
230 90 230
2,400 3,350 Floors
230 90 90 230 Finished as per plan and/or client choice/building tender, on 25mm screed, on 80mm
2,400 900 2,360 concrete for ground storey, (as above) on 250 micron waterproof sheeting, on compacted
filling and sand blinding. All floor levels to be a minimum of 150mm above FGL.
3,945 900 1,455
W6 Doors & Windows
Windows top-hung aluminium, as per plan codes & elevations.
(900x1100) DP ELEVATION 2 Note : Safety glass to window panes larger than 1sq.m or closer than 500mm from FFL to
230
230
230
SCALE 1:100 SANS 10137 and to comply to SANS 10400-N.
BEDRM 1
1,575
(Carpet) 110mm Smooth uPVC Sewer pipe with minimum 1:60 fall with IL at minimum 450mm.
50mm 2way vent valve on start of one pipe sewer system. All sewer lines passing under
2,600
2,600
(900x1100)
3,520
structure to comply to SANS 10400-PP24 (encase in sand or concrete). All drainage to
comply to SANS 10400-P.
3,590
W6
900
90
NOTES:
Figured dimensions takes preference to scaled dimensions.
2,335
(900x900)
B.I.C BATH RM All relevant levels and dimensions to be verified on site prior to construction.
1,900
(Tiles)
90
900
W5
4
ROOF
All levels to be determined on site and can/may be to adjusted to the descrepancy of the
9,510
9,510
2 PLASTER & PAINT developer and his appointed builder. Developer to approve plan prior to submission to
(900x1100)
90
council.
2,700
TV
900
1,885
W6
All glazing to SANS 10137 & SANS 10400-N. Printed dimensions take preference over
A A ELEVATION 3 scaled dimensions. All work to be carried out in strict accordance to NBR and local bylaws.
5,760
SCALE 1:100
BEDRM 3 Finishes in builders contract takes preference over finishes specified on plan.
LOUNGE In case of discrepancies the author of the plan should be contacted before proceeding with
(Carpet)
1,840
(1500x1500)
1,500
4,370
W1
KITCHEN
(Tiles)
2,580
900
1,705
PD26
230
1,060
WM
600
230
230
W5 W6
(900x900) (900x1100)
PLASTER & PAINT
980 900 980 900 820 900 820
37 VAN DER STEL STREET P.O. BOX 1399 TEL: 021 906 6770
KUILSRIVER KUILSRIVER FAX: 021 906 6775
230 90 230 ELEVATION 4 7579 7580 EMAIL : nationhousing@mweb.co.za
2,400 3,350 SCALE 1:100
230 230 230 230
2,400 900 2,080 ELECTRICAL HOUSE PLAN- Type 5-60 sq.m (Affordable) DATE : 2017
6,300 TELEPHONE POINT DRAWING : Type 5-60 sq.m
CEILING LIGHT POINT
PROPOSED NEW DWELLING
FOR .......... ON ERF ...... , PROJECT :MOUNTAIN RIDGE
NATION HOUSING
1 SANS 10400-XA WATERPROOF LIGHT POINT
MOUNTAIN RIDGE ESTATE SCALE : 1:100
15 AMP PLUG POINT
HWC DETAILS:
FLOOR PLAN
SCALE 1:100
PIPING 15mm AND 22mm CLASS 1
COPPER TUBE
15 AMP UNDERCOUNTER
MOUNT PLUG POINT
AREA HOUSE : 60 sq.m HWC KWIKOT ECONO STD GALV. 150L
15 AMP PLUG POINT 2000mm HIGH
WALLS EXT. 230 CAVITY GEYSER.
LAGGING (R=1) ON ALL EXPOSED PIPES DISTRIBUTION BOARD
INT. 90 x 190 mm
W1= 1.5x1.5 = 2.25 sq.m TV TV POINT
NOTE: W5 = (0.9 x 0.9)x2 = 1.62 sq.m
FFL ABOVE NGL TO BE W6= (0.9x1.1) x 4 = 3.96 sq.m
STOVE CONNECTION
TOTAL =7.83 sq.m
DETERMINED ON SITE. FLOOR AREA : 60 sq.m
MINIMUM 150mm. FENESTRATION PERCENTAGE : 13.05 % BALL FITTINGS TO ALL LIGHT POINTS
SCHEDULE OF FINISHES
Walls
Footings 230x600mm in medium strength concrete to NBR standard and SANS 10400.
Walls are built with 90mm bricks - heights as per plan. External walls to plastered and
painted with 50mm cavity between internal and external skins with 2.5 butterfly wire ties per
square meter. All internal walls plastered with lime cement.
26.5 Brickforce in 4 layers over all openings, with precast concrete lintels to openings greater
ROOF PITCH than one metre.
1,968 300
Window-sills
300 External & Internal, smooth finished cement plaster.
Roof Construction
4,518
Cement roof tiles @ 26.5 pitch on 38x38 SAP battens at maximum 320 centres on
DPC prefabricated gangnail trusses at maximum 760 c/c, fixed to 114x38 wallplates and
PLASTER & PAINT
anchored to brickwork with 30x2mmx1m hoop iron ties, built into walls for minimum of
NGL
600mm. SABS approved underlay to tiled roof. All roof timber to be minimum Grade 5 SA
2,550
FRONT ELEVATION 1 Pine TAN treated. All gable ends to be tied with hoop iron built into wall for minimum
600mm and up to two trusses away from gable to SANS 10400-L where applicable.
SCALE 1:100
Bracing as per A19 Engineer.
Eaves
BEDRM BATHRM 300mm Open eaves overhang with 225mmx10mm painted fibre cement fascias.
DPC DPC
250mic DPM
375mic DPM UNDER ALL WALLS 400x200 Rainwater Disposal
MINIMUM 150mm ABOVE FGL THICKENED
FOUNDATION Alu. gutters with PVC downpipes as per plan.
600x230 600x230
SECTION A-A Ceilings
SCALE 1:100 25mm Isoboard EPS ceiling on 38 x 38 SA Pine battens at 300mm spacing and 76mm
Rhino cornice with 155mm thick flexible polyester blanket(Isotherm).
Floors
Finished as per plan and/or client choice/building tender, on 25mm screed, on 80mm
concrete for ground storey, (as above) on 250 micron waterproof sheeting, on compacted
filling and sand blinding. All floor levels to be a minimum of 150mm above FGL.
PLASTER & PAINT Doors & Windows
3 Windows top-hung aluminium, as per plan codes & elevations.
7,200
ELEVATION 2 Note : Safety glass to window panes larger than 1sq.m or closer than 500mm from FFL to
SANS 10137 and to comply to SANS 10400-N.
SCALE 1:100
230 90 230
3,160 3,490 Drainage
230 90 90 230 110mm Smooth uPVC Sewer pipe with minimum 1:60 fall with IL at minimum 450mm.
3,160 880 2,520 50mm 2way vent valve on start of one pipe sewer system. All sewer lines passing under
structure to comply to SANS 10400-PP24 (encase in sand or concrete). All drainage to
comply to SANS 10400-P.
230
230
1,230
B.I.C
B.I.C
BEDRM 1 NOTES:
(Carpet)
(900x1100)
(Carpet)
2,850
1,200
3,230
All levels to be determined on site and can/may be to adjusted to the descrepancy of the
developer and his appointed builder. Developer to approve plan prior to submission to
PLASTER & PAINT council.
1,850
1,410
All glazing to SANS 10137 & SANS 10400-N. Printed dimensions take preference over
90
scaled dimensions. All work to be carried out in strict accordance to NBR and local bylaws.
ELEVATION 3
90
BEDRM 3
(600X900)
EN-SUITE SCALE 1:100 Finishes in builders contract takes preference over finishes specified on plan.
(Carpet)
(900x1100)
1,200
(Tiles)
600
4
W3
In case of discrepancies the author of the plan should be contacted before proceeding with
2,470
2
900
W6
any construction.
9,720
9,720
740
B.I.C
90
BATH RM
(900x900)
HWC IN
ROOF
(Tiles)
1,600
1,680
A A
900
W5
90
TV
90
(1500x1500)
1,690
3,110
1,500
W1
KITCHEN
LOUNGE (Tiles)
2,960
(Tiles)
890
37 VAN DER STEL STREET P.O. BOX 1399 TEL: 021 906 6770
1,035
ELEVATION 4
1,060
WM
W6
650
(900x1100)
C-STOEP SCALE 1:100 ELECTRICAL HOUSE PLAN- Type 6-68 sq.m (Affordable) DATE : 2017
230
MOUNTAIN RIDGE
ON 800 x 800 x 300mm MASS
PIPING 15mm AND 22mm CLASS 1 FOR .......... ON ERF ........... , PROJECT : NATION HOUSING
CONCRETE FOOTING WITH WATERPROOF LIGHT POINT
COPPER TUBE
2 x Y12 STEEL RODS IN
1,165 900 1,165 900 1,085 900 1,085 HWC KWIKOT ECONO STD GALV. 150L 15 AMP PLUG POINT
MOUNTAIN RIDGE ESTATE SCALE : 1:100
CENTRE BENT 90 INTO
FOOTING FOR MIN. 300mm 230 90 90 230 GEYSER.
AREA HOUSE : 67.30 sq.m LAGGING (R=1) ON ALL EXPOSED 15 AMP UNDERCOUNTER
3,160 880 2,520 MOUNT PLUG POINT
230 230 C-STOEP : 2.68 sq.m PIPES
4,130 2,610 WALLS EXT. 230 CAVITY 15 AMP PLUG POINT 2000mm HIGH
W1= 1.5x1.5 = 2.25 sq.m
7,200 INT. 90 x 190 mm W2 = 1.2x1.2 = 1.44 sq.m DISTRIBUTION BOARD
W3 = 0.6 x 0.9 = 0.54 sq.m
TV TV POINT
1 NOTE:
W5 = 0.9 x 0.9 = 0.81 sq.m
W6= (0.9x1.1) x 3 = 2.97 sq.m
FFL ABOVE NGL TO BE TOTAL =8.01 sq.m STOVE CONNECTION
FLOOR PLAN
SCALE 1:100
DETERMINED ON SITE. FLOOR AREA : 68 sq.m
FENESTRATION PERCENTAGE :
MINIMUM 150mm. 11.78% BALL FITTINGS TO ALL LIGHT POINTS
SCHEDULE OF FINISHES
26.5
Walls
ROOF PITCH
1,968
Footings 230x600mm in medium strength concrete to NBR standard and SANS 10400.
Walls are built with 90mm bricks - heights as per plan. External walls to plastered and
300 300 painted with 50mm cavity between internal and external skins with 2.5 butterfly wire ties
per square meter. All internal walls plastered with lime cement.
Brickforce in 4 layers over all openings, with precast concrete lintels to openings greater
4,518
than one metre.
DPC
Window-sills
External & Internal, smooth finished cement plaster.
2,550
Roof Construction
Cement roof tiles @ 26.5 pitch on 38x38 SAP battens at maximum 320 centres on
prefabricated gangnail trusses at maximum 760 c/c, fixed to 114x38 wallplates and
PLASTER & PAINT anchored to brickwork with 30x2mmx1m hoop iron ties, built into walls for minimum of
BATHRM BEDRM NGL
DPC 600mm. SABS approved underlay to tiled roof. All roof timber to be minimum Grade 5 SA
DPC
400x200
250mic DPM
375mic DPM UNDER ALL WALLS FRONT ELEVATION 1 Pine TAN treated. All gable ends to be tied with hoop iron built into wall for minimum
600mm and up to two trusses away from gable to SANS 10400-L where applicable.
THICKENED MINIMUM 150mm ABOVE FGL SCALE 1:100
FOUNDATION Bracing as per A19 Engineer.
600x230 600x230
SECTION A-A Eaves
SCALE 1:100 300mm Open eaves overhang with 225mmx10mm painted fibre cement fascias.
Rainwater Disposal
Alu. gutters with 75mm PVC downpipes as per plan.
3 Ceilings
25mm Isoboard EPS ceiling on 38 x 38 SA Pine battens at 300mm spacing and 76mm
7,200 Rhino cornice with 155mm thick flexible polyester blanket(Isotherm).
230 90 230
3,580 3,070 Floors
230 90 90 230 Finished as per plan and/or client choice/building tender, on 25mm screed, on 80mm
2,590 900 3,070
concrete for ground storey, (as above) on 250 micron waterproof sheeting, on compacted
filling and sand blinding. All floor levels to be a minimum of 150mm above FGL.
230
230
230
1,165
Doors & Windows
1,400
Note : Safety glass to window panes larger than 1sq.m or closer than 500mm from FFL to
1,800
1,800
B.I.C
BEDRM 1
(Carpet)
(900x1100)
(Carpet) SANS 10137 and to comply to SANS 10400-N.
SCALE 1:100
(1200x1200)
2,800
900
W6
3,220
Drainage
1,200
W2
110mm Smooth uPVC Sewer pipe with minimum 1:60 fall with IL at minimum 450mm.
90
90
50mm 2way vent valve on start of one pipe sewer system. All sewer lines passing under
structure to comply to SANS 10400-PP24 (encase in sand or concrete). All drainage to
comply to SANS 10400-P.
1,925
1,240
90
Electricals - as per building tender.
90
BEDRM 3 Position of Oostersee Electrical connection box on exterior wall to be determined on site.
EN-SUITE
(600x900)
(Carpet)
1,200
(900x1100)
(Tiles)
600
NOTES:
W3
2,700
Figured dimensions takes preference to scaled dimensions.
900
W6
B.I.C
ROOF
10,680
(900x900)
(Tiles) All levels to be determined on site and can/may be to adjusted to the descrepancy of the
2 A A
1,660
900
W5
developer and his appointed builder. Developer to approve plan prior to submission to
7,630
90
TV 4 All glazing to SANS 10137 & SANS 10400-N. Printed dimensions take preference over
scaled dimensions. All work to be carried out in strict accordance to NBR and local bylaws.
90
ELEVATION 3
1,910
SCALE 1:100 Finishes in builders contract takes preference over finishes specified on plan.
LOUNGE In case of discrepancies the author of the plan should be contacted before proceeding
(Tiles) with any construction.
(1500x1500)
3,170
1,500
4,770
W1
900
KITCHEN
(Tiles)
1,060
WM
PD26
1,765
230
230
W6 C-STOEP
700
(900x1100)
W6
320 x 320 mm BRICK COLUMN
ON 800 x 800 x 300mm MASS
(900x1100)
37 VAN DER STEL STREET P.O. BOX 1399 TEL: 021 906 6770
CONCRETE FOOTING WITH 1,005 900 1,005 900 1,245 900 1,245 PLASTER & PAINT
2 x Y12 STEEL RODS IN KUILSRIVER KUILSRIVER FAX: 021 906 6775
CENTRE BENT 90 INTO 7579 7580 EMAIL : nationhousing@mweb.co.za
FOOTING FOR MIN. 300mm 230 90 230
2,590 4,060 ELEVATION 4 ELECTRICAL HOUSE PLAN- Type 7-75 sq.m (Affordable) DATE : 2017
230 230 SCALE 1:100
3,810 2,930 SANS 10400-XA TELEPHONE POINT
PROPOSED NEW DWELLING DRAWING : Type 7-75 sq.m
7,200 HWC DETAILS: CEILING LIGHT POINT
PIPING 15mm AND 22mm CLASS 1 FOR .......... ON ERF ...... , PROJECT :MOUNTAIN RIDGE
NATION HOUSING
COPPER TUBE WATERPROOF LIGHT POINT
HWC KWIKOT ECONO STD GALV. 150L MOUNTAIN RIDGE ESTATE SCALE : 1:100
1 GEYSER.
15 AMP PLUG POINT
LAGGING (R=1) ON ALL EXPOSED 15 AMP UNDERCOUNTER
FLOOR PLAN
SCALE 1:100
AREA HOUSE : 74.23sq.m
C-STOEP : 2.67sq.m
PIPES MOUNT PLUG POINT
15 AMP PLUG POINT 2000mm HIGH
W1= 1.5x1.5 = 2.25 sq.m
WALLS EXT. 230 CAVITY W2 = 1.2x1.2 = 1.44 sq.m
W3 = 0.6 x 0.9 = 0.54 sq.m DISTRIBUTION BOARD
INT. 90 x 190 mm
W5 = 0.9 x 0.9 = 0.81 sq.m TV TV POINT
NOTE: W6= (0.9x1.1) x 3 = 2.97 sq.m
TOTAL =8.01 sq.m
FFL ABOVE NGL TO BE FLOOR AREA : 68 sq.m STOVE CONNECTION
DETERMINED ON SITE. FENESTRATION PERCENTAGE :
MINIMUM 150mm. 11.78% BALL FITTINGS TO ALL LIGHT POINTS
SCHEDULE OF FINISHES
Walls
26.5 Footings 230x600mm in medium strength concrete to NBR standard and SANS 10400.
Walls are built with 90mm bricks - heights as per plan. External walls to plastered and
ROOF PITCH
painted with 50mm cavity between internal and external skins with 2.5 butterfly wire ties per
1,968
square meter. All internal walls plastered with lime cement.
300 300 Brickforce in 4 layers over all openings, with precast concrete lintels to openings greater
than one metre.
Window-sills
4,518
Roof Construction
2,550
Cement roof tiles @ 26.5 pitch on 38x38 SAP battens at maximum 320 centres on
prefabricated gangnail trusses at maximum 760 c/c, fixed to 114x38 wallplates and
PLASTER & PAINT anchored to brickwork with 30x2mmx1m hoop iron ties, built into walls for minimum of
NGL 600mm. SABS approved underlay to tiled roof. All roof timber to be minimum Grade 5 SA
Pine TAN treated. All gable ends to be tied with hoop iron built into wall for minimum 600mm
BATHRM BEDRM FRONT ELEVATION 1 and up to two trusses away from gable to SANS 10400-L where applicable. Bracing as per
DPC DPC SCALE 1:100 A19 Engineer.
250mic DPM
400x200 375mic DPM UNDER ALL WALLS
THICKENED MINIMUM 150mm ABOVE FGL Eaves
FOUNDATION
600x230 600x230 300mm Open eaves overhang with 225mmx10mm painted fibre cement fascias.
SECTION A-A Rainwater Disposal
SCALE 1:100
Alu. gutters with 75mm PVC downpipes as per plan.
Ceilings
25mm Isoboard EPS ceiling on 38 x 38 SA Pine battens at 300mm spacing and 76mm
Rhino cornice with 155mm thick flexible polyester blanket(Isotherm).
3
Floors
7,200
Finished as per plan and/or client choice/building tender, on 25mm screed, on 80mm
230 90 230 concrete for ground storey, (as above) on 250 micron waterproof sheeting, on compacted
3,580 3,070 filling and sand blinding. All floor levels to be a minimum of 150mm above FGL.
230 90 90 230
2,590 900 3,070 Doors & Windows
Windows top-hung aluminium, as per plan codes & elevations.
Note : Safety glass to window panes larger than 1sq.m or closer than 500mm from FFL to
230
230
ELEVATION 2 SANS 10137 and to comply to SANS 10400-N.
SCALE 1:100
1,570
1,760
Drainage
110mm Smooth uPVC Sewer pipe with minimum 1:60 fall with IL at minimum 450mm.
BEDRM 1 BEDRM 2 50mm 2way vent valve on start of one pipe sewer system. All sewer lines passing under
(Carpet) (Carpet) structure to comply to SANS 10400-PP24 (encase in sand or concrete). All drainage to
(1200x1200)
3,750
(1500x1500)
1,200
W2
W1
NOTES:
Figured dimensions takes preference to scaled dimensions.
All relevant levels and dimensions to be verified on site prior to construction.
2,160
B.I.C
All work to comply to NBR, Local Bylaws and Municipal Regulations.
1,780
90
All levels to be determined on site and can/may be to adjusted to the descrepancy of the
developer and his appointed builder. Developer to approve plan prior to submission to
BEDRM 3
90
(900x1100)
council.
EN-SUITE (Carpet) PLASTER & PAINT
(900x900)
All glazing to SANS 10137 & SANS 10400-N. Printed dimensions take preference over
2,700
900
1,200
W6
(Tiles)
900
scaled dimensions. All work to be carried out in strict accordance to NBR and local bylaws.
W5
ELEVATION 3
12,070
12,070
B.I.C
SCALE 1:100
640
In case of discrepancies the author of the plan should be contacted before proceeding with
HWC IN
ROOF
(Tiles) A
90
1,700
900
W5
2,775
TV
2 4
90
1,930
LOUNGE
(Tiles)
(1500x1500)
KITCHEN
4,890
1,500
(Tiles)
W1
3,170
900
37 VAN DER STEL STREET P.O. BOX 1399 TEL: 021 906 6770
1,060
W6 C-STOEP ELEVATION 4 HOUSE PLAN- Type 8-85 sq.m (Affordable) DATE : 2017
320
FLOOR PLAN
SCALE 1:100
FFL ABOVE NGL TO BE
W5 = (0.9 x 0.9) x2 = 1.62 sq.m
W6= (0.9x1.1) x 2 = 1.98 sq.m
STOVE CONNECTION 15 AMP UNDERCOUNTER
MOUNT PLUG POINT
DETERMINED ON SITE. TOTAL =10.98 sq.m
FLOOR AREA :85 sq.m BALL FITTINGS TO ALL LIGHT POINTS
MINIMUM 150mm.
FENESTRATION PERCENTAGE : 12.92%