Академический Документы
Профессиональный Документы
Культура Документы
PUMPING EQUIPMENT
Research and
Development
In order to provide the best world-
wide and regional application
solutions, Lincoln develops new
products and systems at research
and development facilities in the
United States, Germany and India.
Providing Solutions
Industrial customers in large processing
plants, automotive manufacturing, pulp
and paper mills, food and beverage and
other manufacturing facilities can depend
on solutions from Lincoln. For the toughest
mobile applications, on the road or in the
field, Lincoln protects heavy equipment
used in mining, construction, agriculture
and over-the-road trucking. In addition,
Lincoln offers the best lubrication
equipment to meet the needs of
automotive service professionals.
Worldwide Support
With five technical support centers
on three continents, and a network
of distributors supported by regional
sales and service offices, our
customers can always draw on
our worldwide resources.
Industrial Pumping Equipment
Table of Contents
1
Industrial Pumping Equipment
Introduction
2
Industrial Pumping Equipment
Introduction
Adhesives to reservoirs on
packaging machinery
Lubricants to smaller containers in Stand Pipe
remote locations
Materials to high-pressure pumps for
spray or flow applications
Measure System
Material is pumped from original containers Twin Post
Pressure Primer
Flow System
Material is pumped from the original contain-
er through the supply line to a flow gun which
applies the material to a work piece. Typical Air Supply
3
Industrial Pumping Equipment
PowerMaster III
Features
State of the art, fully pneumatic Air Motors, 3468 inches
(76101152203 mm) diameter.
Full 6" stroke for greater output per cycle.
Modular design for easy repair.
Only 5 moving parts, no metal to metal contact.
Newly designed pump tubes offer ratios and outputs to fit any application.
Available to fit any drum or pail size.
Offered in carbon steel, stainless steel or hard chrome plated.
Complete selection of packing materials available.
Full line of priming equipment and mounting devices.
Ball style for fluid materials, shovel foot style for high viscosity
non-fluid materials.
AirBrake
Shuts down pump immediately when excessive pump cycle speed
(runaway) occurs.
Prevents pump damage due to a runaway condition.
Indicates system fault caused by empty container or broken supply line.
Limits spills due to pump outlet hose failure.
Sends fault signal to remote alarm locations with optional 244398 signal kit.
Can be ordered already installed (refer to Pump Specification Chart).
Can be added later. Order Model 85317.
Easy to install and setgraduated dial with detents
Kit 273429 upgrades existing AirBrake-equipped pumps to the latest specifica-
tions
4
Industrial Pumping Equipment
PowerMaster III
Model 84985
Pump TubesShovel Foot Design, Plunger and
Bushing Style
For medium to high viscosity, non-fluid materials.
Available in 55 gallon or 16 gallon drum lengths, or mounts
on pressure primer for very high viscosity materials.
Full range of ratios: 12:1 through 84:1 for all applications.
Selected fit, hardened steel plunger and bushing is particularly well suited to
viscous lubricants.
No washers, o-rings or packings to replace on pump piston for ease of
maintenance.
Shovel foot adds mechanical priming to normal suction, assures positive prime
with the most viscous of lubricants.
Complete interchangeability with all Series III Air Motors.
Exclusive patented, leakless gland assembly kit (to protect gland sealthe only
Model 84991
seal in pump tube) is available as an accessory.
5
Industrial Pumping Equipment
PowerMaster III Pump Selection Chart
6.7 / 110 35 / 9
10:1 *2066 55 gal Std. 84803 3 / 76 84976
Other PowerMaster Air Motor/Pump Tube Combinations (all feature 3/4" NPTF Material Outlet)
Carbon Steel Ball Type Carbon Steel Shovel Type Plunger & Bushing
Pump Air Pump Max. GPM/LPM Pump Air Pump Max. GPM/LPM
Tube Motor Tube Free Delivery Tube Motor Tube Free Delivery
Ratio Style Model Model 70 CPM Ratio Style Model Model 70 CPM
55 gal Std. 84808 84985 55 gal Std. 84808 w/ 84991
84:1 2.0 / 7.5
42:1 16 gal w/ AirBrake 84984 16 gal AirBrake *94908 84992
Stub *94908 84986 80:1 16 gal Std. 84806 84994 1.2 / 4.5
16 gal Std. 84806 84984 55 gal w/ AirBrake 84991
48:1 2.0 / 7.5
24:1 w/ AirBrake 3.9 / 14.6 16 gal *94906 84992
Stub *94906 84986 55 gal Std. 84804 84993
40:1 1.2 / 4.5
Std. 84804 w/ 16 gal w/ AirBrake 84994
12:1 16 gal AirBrake*94904 84984
24:1 16 gal *94904 84992 2.0 / 7.5
55 gal Std. 84985 55 gal 84997
6:1 36:1 0.7 / 2.6
Stub 84803 84986 16 gal 84998
55gal 84995
24:1 1.0 / 3.7
Carbon Steel Shovel Type Packed Piston 16 gal
Std. 84803
84996
55 gal 84993
Pump Air Pump Max. GPM/LPM 20:1 1.2 / 4.5
Tube Motor Tube Free Delivery 16 gal 84994
Ratio Style Model Model 70 CPM 55 gal 84991
12:1 2.0 / 7.5
55 gal Std. 84808 w/ 84976 16 gal 84992
80:1 2.2 / 8.2
16 gal AirBrake *94908 84977 * Order pump tube and air motor separately.
55 gal 84978
64:1 Std. 84806 1.5 / 5.7
16 gal 84979
55 gal w/ AirBrake 84976
44:1 *94906 2.2 / 8.2
16 gal 84977
32:1 55 gal Std. 84804 w/ 84978 1.5 / 5.7
22:1 55 gal AirBrake *94904 84976 2.2 / 8.2
55 gal 84978
15:1 1.5 / 5.7
16 gal Std. 84803 84979
10:1 16 gal 84977 2.2 / 8.2
6
Industrial Pumping Equipment
PowerMaster III Pump Selection Chart
Ball Pumps
Gallons / Liters Per Minute Minimum I.D. Air Consumption Per Cycle
Air Supply Hose S.C.F.M. @ M3/Min. @ S.C.F.M. @ M3/Min. @
30 CPM 50 CPM 70 CPM in. / mm 70 psig 4.8 bar 100 psig 6.8 bar
1.1 0.031 1.6 0.045
1
2" / 12 0.8 0.023 1.1 0.031
1.5 / 5.8 2.6 / 9.7 3.9 / 14.6
3
8" / 10 0.5 0.014 0.7 0.02
Other PowerMaster Air Motor/Pump Tube Combinations (all feature 3/4" NPTF Material Outlet)
7
Industrial Pumping Equipment
Optional Kits for PowerMaster III Pumps
Model 84502
8
Industrial Pumping Equipment
PowerMaster III Pump Accessories
Drum Covers
Model 81412
Standard 55 gallon drum cover for mounting PowerMaster III series drum pumps
Model 81412 on full open drums.
Model 83166
Model 83166
Special 55 gallon drum cover for mounting PowerMaster III series drum pumps on
full open drums. Includes port for installation of material agitator.
Model 83727
9
Industrial Pumping Equipment
Elevator & Primers for PowerMaster III Pumps
Priming
Pressures
PSI / Bar Height
For Drum Operating Base
Model Size Description Air Pressure @70 @100 Lowered Raised Dim.
Gal. psi / bar 4.9 7 in. / cm in. / cm in. / mm
NA
Single Post 50-200 NA NA 73 112 Beam
1709 55 Elevator 3-14 185.4 284.5 Length
19 / .5
360 Rotation
Single Post Pump
Hoist & Follower 1212 x 14
for low to med. 50-200 NA NA 73 11012 317.5
2716 55
viscosity materials 3-14 185.4 280.7 x
100K to 200K 355.5
centipoise range
Model 1701 Model 1704 1701** 5 Single Post for 30-150 4.4 6.3 42 5012 2214 x 2214
viscous material 3-10 .3 .44 108 128 600 x 600
1704 55 over 500K 40-100 5 7.1 89 89 26 x 26
centipoise 3-7 .35 .5 226 226 700 x 700
Twin Post for
viscous materials
40-150 2.7 3.7 6618 103 24 x 36
1736 55 in the 200K
3-10 .2 .26 167.6 261.6 600 x 1000
to 500K
centipoise range
Notes:
**Model 83943 portability kit is available for Model 1701. Includes axle and wheels.
For Pressure Primers for 120 lb. drum pumps or for follower rings of materials other than standard
Buna-N, contact Lincoln Technical Services.
Model 1736
10
Industrial Pumping Equipment
Primer, Pressure Primer and Air Motor Accessories
Model 84143
Same as Model 83811 except for use with Model 1736.
Model 84141
Model 85387-8 Same as Model 84144, except includes 34" controls.
Included in 84144 Kit
Model 84722
Model 84723
11
Industrial Pumping Equipment
PileDriver III
12
Industrial Pumping Equipment
PileDriver III
Model 85400
13
Industrial Pumping Equipment
PileDriver III Pump Selection Chart
* Order Pump Tube and Air Motor separately when selecting 3 and 4 air motors, and AirBrake equipped models.
14
Industrial Pumping Equipment
PileDriver III Pump Selection Chart
15
Industrial Pumping Equipment
PileDriver III Pressure Primers
Height Base
Model Lowered Raised Dimensions
in. / cm in. / cm in. / mm
Model 1735
42.5 50.25 22.25 x 22.25
2718* 108 128 600 x 600
89 89 26 x 26
83274 226 226 700 x 700
73 110.5 12.5 x 14
2719 185.4 280.7 317.5 x 355.5
66.125 103 24 x 36
1735 167.6 261.6 600 x 1000
66.125 103 24 x 36
1765 167.6 261.6 600 x 1000
*Model 83943 portability kit is available for Model 2718. Includes axle and wheels.
Model 1765
Note: Units show pumps for illustrative purposes only. Order pump separately.
16
Industrial Pumping Equipment
PileDriver III Mounting Accessories
Model 84167 Model 84722 Series III Air Motor Exhaust Adapter
Replaces standard muffler. Converts exhaust port to 34" NPT female thread.
Model 83811
84141 3
4" Air Line Kit
Model 85387-8
Included in 84144 Kit
17
Industrial Pumping Equipment
Hydro-PowerMaster
18
Industrial Pumping Equipment
Hydro-PowerMaster
84991 55 gal
3:1 4500 / 310 2.0 / 7.5
84992 16 gal
84993 55 gal
4.5:1 1.2 / 4.5
84994 16 gal
7500 / 317
84995 55 gal
5:1 1250 / 86 1.0 / 3.7
84996 16 gal
84997 55 gal
84998 7:1 16 gal 850 / 58 7650 / 527 0.7 / 2.6
See PowerMaster III section for pump tube specifications, mounting devices and accessories.
*Caution: Do not exceed maximum hydraulic inlet pressure listed for each motor/pump tube combination.
Model 2501
Model 2567
19
Industrial Pumping Equipment
Magna-Ram Four Post Pressure Primer
300 Gallon Pressure Primer
for Central Feed of High-
Volume Applications
Powerful four-post design
Replaceable air cylinders
Positive vent mechanism
Cast aluminum follower: twin grooves, twin
seals, flat surface
Built-in crossover for dual primer applications
Low level warning
Empty drum automatic pump shut-off
Wide range pump capability
More compact envelope than
competitive models
Accommodates two PileDriver III pumps
Note: Pumps shown for illustrative purpose only. Order pumps separately.
20
Industrial Pumping Equipment
System Accessories
Model 884
Model 780
21
Industrial Pumping Equipment
System Accessories
22
Industrial Pumping Equipment
System Accessories
Swivels
Designed for use between the material hose and control valve to give the operator
more flexibility and mobility and to reduce fatigue.
Max. Working Pressure
Model 81728 Model Style Threads
psi / bar
81728 Straight 2" NPT Male x 38" NPT Male
1
6400
82087 90 2" NPT Male x 12" NPT Male
1
435
81729 Universal 2" NPT Male x 38" NPT Male
1
Model 82072
Important Note: For lubricant use only. Not recommended for abrasive or corrosive materials.
23
Industrial Pumping Equipment
Air Operated Ejectors
Model 84564
Model 84540
24
Industrial Pumping Equipment
Measuring Valves
25
Industrial Pumping Equipment
Low Pressure Stationary Diaphragm Pumps
1
/4" - 2" Air Operated Pumps
Basic Design Features
Diaphragm pumps are driven by com-
pressed air. The directional air distribu-
tion valve and pilot valvethe air
endare located in the center section
of the pump. Liquid moves through two
manifolds and outer chambers of the
pumpthe wet end. Generally, check
valves are located at the top and bot-
tom of each outer chamber or on a
common manifold. The two outer Right chamberdischarge Left chamberdischarge
Left chambersuction Right chambersuction
85359 chambers are connected by suction
and discharge manifolds. Lincolns double diaphragm self-priming design offers many
advantages over other pumps.
Pump abrasive and sheer-sensitive materials. Low interval velocities move abrasives
easily with no damage. Gentle pumping action does not sheer fragile materials.
Pumps viscous materials. Even heavy or solids-laden materials can be pumped.
Environmentally friendly. No motors,
seals or packing to leak. Pump Installation Guide
Self-priming. Able to dry prime under
most suction lift or flooded suction
conditions.
Variable flow. Regulate the inlet air
supply to adjust flow.
Runs dry without damage.
Deadheads against closed discharge.
85628 Excessive back pressure stops
operation without damage until
discharge opens. Eliminates
bypass systems or relief valves.
Explosion-proof. Eliminates sparking
concerns of other electrical or
rotating pumps.
WARNING
The pump exhaust should be piped to an area for safe disposal of product being
pumped in the event of a diaphragm failure.
85622
Diaphragm Pump Materials Profile
Material/ Operating Temperatures
Profile Maximum Minimum Optimum
Buna-N 190F / 88C -10F / -23C 50 to 140 F / 10 to 60 C
General purpose, oil resistant. Good solvent oil, water and hydraulic fluid resistance. Should not be used with
highly polar solvents like acetone and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons.
Conductive Acetyl Governed by diaphragm material of pump
Tough, impact resistant, ductile. Good abrasion resistance and low friction surface. Generally inert, with good
chemical resistance except for strong acids and oxidizing agents.
Polypropylene 150F / 66C 40F / 5C 40 to 150 F / 5 to 66 C
Thermoplastic polymer. high tensile and flex strength. Resist strong acids and alkalies. Attacked by chlorine,
fuming nitric acid and other strong oxidizing agents.
Hytrel 190F / 88C -10F / -23C 50 to 140 F / 10 to 60 C
Good on acids, bases, amines and glycols at room temperature only.
Urethane 150F / 66C 32F / 0C 50 to 110 F / 10 to 60 C
Good resistance to abrasives. Poor resistance to most solvents and oils.
84811
Santoprene 212F / 100C -10F / -23C 50 to 212 F / 10 to 43 C
Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life.
Excellent abrasion resistance.
Teflon 212F / 100C -35F / -37C 50 to 212 F / 10 to 43 C
(PFA/TFE) Chemically inert, virtually impervious. Very few chemicals are known to chemically react with Teflon:
molten alkali metals, turbulent liquid or gaseous fluorine, and a few fluoro-chemicals such as chlorine trifluoride
or oxygen difluoride which readily liberate free fluorine at elevated temperatures.
26
Industrial Pumping Equipment
Low Pressure Stationary Diaphragm Pumps/Accessories
1:1 Air Operated Diaphragm Pump Line
Wetted Pump Max. Free Air Max. Rec. Max.
Model Pump Pump or Soft Inlet/Outlet Delivery Inlet Inlet Air Susp.
Number Replaces Desc. Body Parts NPT gpm NPT(F) Pressure Solids
85361 1
4" Polyprop Buna-N 1
4" / 14" 4 1
8" 125 psi 1
64"
85631 284840 1
2" Aluminum Buna-N 1
2" / 12" 15 1
4" 100 psi 1
8"
85632 84841 1
2" Aluminum Teflon 1
2" / 12" 15 1
4" 100 psi 1
8"
85633 84840 1
2" Aluminum Hytrel 1
2" / 12" 15 1
4" 100 psi 1
8"
85622 85353 1
2" Polyprop Santoprene 1
2" / 12" * 14 1
4" 100 psi 1
8"
85623 85354 1
2" Polyprop Teflon 1
2" / 12" * 14 1
4" 100 psi 1
8"
85626 284846 1
2" Polyprop Buna-N 1
2" / 12" * 14 1
4" 100 psi 1
8"
85629 84852, 284852 1" Aluminum Hytrel 1"/ 1" 45 1
2" 125 psi 1
4"
85628 84853 1" Aluminum Teflon 1"/ 1" 45 1
2" 125 psi 1
4"
85627 84855, 284855 1" Aluminum Buna-N 1"/ 1" 45 1
2" 125 psi 1
4"
85621 84862, 284862 112" Aluminum Buna-N 112" / 112" 106 3
4" 125 psi 1
4"
85624 84870, 284870 2" Aluminum Buna-N 2"/ 2" 150 3
4" 125 psi 1
4"
U.L. Listed
84811 1" UL Aluminum Buna-N 1"/ 34" 37 1
4" 50 psi 1
8"
84812 1" UL Aluminum Teflon 1"/ 34" 37 1
4" 50 psi 1
8"
* Can be converted to dual 1/2" outlet.
27
Industrial Pumping Equipment
Transfer Pumps
Transfer Systems
Pump material from one container or reservoir to another. Typical applications
involve high volume transfer of low to medium viscosity fluids.
Model 84080-9
Model Special Features
84080-9 2" bung bushing and " NPTF return inlet.
84145-9 Wall mount kit, and suction hose check.1
Built-in air control valve for throttling air supply to pump to control material output.
82230
Operates on pressure as low as 20 psi (1.4 bar). Self adjusting bung bushing.
Light weight and efficient. The pump will stall against pressure and can be controlled
84829
by a fluid dispensing valve.
Notes:
1. Suction hose or tube (not included) should be compatible with pumped product and not exceed
10' (3 m) long nor less than 34" (19 mm) I.D.
2. 91172 transfer pump hose. 8 feet (2.5 m) 34" (19 mm) I.D. standard hose and curved spout, with
inlet threaded 34" - 11 - 1 2" A.N. to fit outlet of 82230 pump.
3. For transfer systems involving long supply lines, PowerMaster III Stub Pumps are available.
Consult Lincoln for your application needs.
Specifications
Model 4480
Model Description Material Operation Pump Tube Attachment
No. Outlet Length
4475 Bare Pump " NPTF Pneumatic 2" Bung,
Spigot pressure adjustable for
34"
Spigot extension delivery stroke, 55 & 16 gal.
4480 (86 cm)
Pump with spring return drums, bench
on/off valve stroke & portable tanks
28
Industrial Pumping Equipment
Other Pumps
Model 2390
Series II PowerMaster 6
Max. Delivery Avg. Output Piston Packing Gland Packing Pump Type Matl. Outlet
Molybdenum
.42 gal/min 1.4 in3/cycle Bushing & Disulfide 1
1.6 l/min 23 cc/cycle Plunger Urethane Shovel 2" NPTF(F)
Stacked V
Model No. Drum Size Pump Ratio Air Motor Size Max. Discharge Press. Air Inlet
2360 55 gal. 6 in 14000 psi 3
140:1 4" NPTF(F)
2361 16 gal. 150 mm 952 bar
Model 2360
Supply Line Booster Pump Tube
Ensures proper supply line pressure over long distances. The booster pump picks
up low material pressure and boosts it back up to the desired pressure in the line.
Pumping distance, pipe size and material viscosity determines number and spacing
of booster pumps.
Max. Delivery Gland Packing Material Inlet & Outlet
1 gal/min 3.8 l/min Polyurethane U-cup 3" NPTF(M)
29
Industrial Pumping Equipment
Pump Packages
30
Industrial Pumping Equipment
Pump Packages
31
Industrial Pumping Equipment
Pump Packages
Model 1725
Portable package designed for original five gallon pails. Portable pressure primer
includes reversible steel cleats for securing both straight-sided and tapered pails.
Follower with wiper blade cleans sides of pail as material is dispensed. Air assist-
ed follower extraction.
Model Pump Drum Max. Del. Max. Dischrg. Hose Standard
No. Ratio Size gal./min. Pressure Description Accessories
l./min. psi / bar
1725 25:1 5 gal. 0.25 / 0.95 5000 / 340 NA NA
Hose rated to 1500 psi / 102 bar.
Note: Order hose, flow gun, etc. separately.
Model 1725
Model 252
For dispensing heavy greases, NLGI #3. Includes a screw prime follower.
Note: Model includes 7 ft. of 1/4" high pressure hose, 81387 universal swivel, and 740 control valve.
Pressure switch is factory set to shut-off pump at 5,000 psi lubricant pressure and to start pump
when pressure drops to 2,500 psi.
Model 252
32
Industrial Pumping Equipment
Numerical Index
Viton and Teflon are registered trademarks of DuPont Performance Elastomers
Model No. Page No. Model No. Page No.
252. ................................................................................32 2328. ..............................................................................14
740. ................................................................................32 2342. ..............................................................................14
775. ................................................................................21 2349. ........................................................................14, 31
776. ................................................................................21 2350. ..............................................................................14
780. ................................................................................21 2352. ..............................................................................14
884. ................................................................................21 2353. ..............................................................................14
885. ................................................................................21 2356. ..............................................................................14
1701. ........................................................................10, 30 2360. ..............................................................................29
1704. ........................................................................10, 11 2361. ..............................................................................29
1709. ..............................................................................10 2367. ..............................................................................14
1725. ........................................................................30, 32 2368. ..............................................................................14
1735...................................................................16, 17, 31 2375. ..............................................................................14
1736. ........................................................................10, 11 2390 ...............................................................................29
1765. ........................................................................16, 17 2391 ...............................................................................29
1785. ..............................................................................20 2392 ...............................................................................29
1786. ..............................................................................20 2393 ...............................................................................29
2001. ................................................................................6 2394 ...............................................................................29
2002. ................................................................................6 2395 ...............................................................................29
2004. ................................................................................6 2501. ..............................................................................19
2008. ................................................................................6 2567. ..............................................................................19
2010. ................................................................................6 2716. ........................................................................10, 11
2011. ................................................................................6 2718. ........................................................................16, 31
2014. ................................................................................6 2719. ........................................................................16, 17
2021. ................................................................................6 4475 ...............................................................................28
2023. ................................................................................6 4480 ...............................................................................28
2051. ................................................................................6 5803. ..............................................................................22
2052. ................................................................................6 11196. ............................................................................22
2066. ................................................................................6 12071. ............................................................................22
2075. ................................................................................6 12080.......................................................................30, 31
2076. ................................................................................6 14237. ............................................................................22
2320. ..............................................................................14 16177. ..............................................................................9
2321. ..............................................................................14 62028. ............................................................................22
2322. ..............................................................................14 62061. ............................................................................22
2323. ..............................................................................14 62117. ............................................................................22
2325. ..............................................................................14 66001. ............................................................................22
2326. ..............................................................................14 66111. ............................................................................23
33
Industrial Pumping Equipment
Numerical Index
34
Industrial Pumping Equipment
Numerical Index
35
Industrial Pumping Equipment
Numerical Index
36
A Complete Line of Lubrication Solutions
and Industrial Pumping Products
Americas:
St. Louis, Missouri
314.679.4200
Fax: 800.424.5359
Europe/Africa:
Walldorf, Germany
49.6227.33.0
Fax: 49.6227.33.259
Asia/Pacific:
Singapore
65.6588.0188
Fax: 65.6588.3438