Академический Документы
Профессиональный Документы
Культура Документы
AIM :- to determine the RC-low pass,high pass filter with cut off frequency 1000 Hz and to draw with
frequency response curve
APPARATUS:- oscillator,resistor,capacitor,etc
PROCEDURE:- A low pass circuit is constructed as shown in fig. with the designed value of R and C
The input voltage is set to a suitable values . The frequency is varies in suitable steps and out put
voltage is noted using multimeter. The observe is repeated for different frequencies.
For all frequency setting input voltage from the oscillator is maintained constant A graph of output
voltage v/s logt is ploted and the cut off frequency is calculated from the graph
The designed and observed cut off frequency are compare the above steps are repeated for the high
pass frequency filter
Fc = 1/2RC
Where: R resistance in
F frequency in Hz
C capacitance in F