0 оценок0% нашли этот документ полезным (0 голосов)
60 просмотров9 страниц
The document provides details on the design of structures including one-way and two-way slabs. For one-way slabs, it lists the design parameters considered and provides the slab descriptions, required depths, steel reinforcement details, bending moments, and area of steel required and provided for slab panels S4 and S5. For two-way slabs, it similarly lists the design parameters and provides details on slab panels S1, S2, and S3 including dimensions, loads, bending moment coefficients, and required depths. The document appears to be related to the structural design of slabs for a building.
The document provides details on the design of structures including one-way and two-way slabs. For one-way slabs, it lists the design parameters considered and provides the slab descriptions, required depths, steel reinforcement details, bending moments, and area of steel required and provided for slab panels S4 and S5. For two-way slabs, it similarly lists the design parameters and provides details on slab panels S1, S2, and S3 including dimensions, loads, bending moment coefficients, and required depths. The document appears to be related to the structural design of slabs for a building.
The document provides details on the design of structures including one-way and two-way slabs. For one-way slabs, it lists the design parameters considered and provides the slab descriptions, required depths, steel reinforcement details, bending moments, and area of steel required and provided for slab panels S4 and S5. For two-way slabs, it similarly lists the design parameters and provides details on slab panels S1, S2, and S3 including dimensions, loads, bending moment coefficients, and required depths. The document appears to be related to the structural design of slabs for a building.
Width of slab panel lx in m 2.81 3.58 ly/lx 8.52 2.11 Overall depth required in mm 108 138 Width of slab panel considered 'b' in 1.00 1.00 'm' Depth provided 'D' in 'm' 0.125 0.14 Dia.of bars assumed 8mm 8mm Dead load in KN/sqm 4.125 4.500 Live load in KN/sqm 4.00 4.00 Floor finishes in KN/sqm 1.00 1.00 Total Load in KN/sqm 9.125 9.500 Design Moment Me1(-)ve in KN-m 10.81 18.26 Effective depth for balanced section 62.58 81.35 in 'mm' Effective depth provided 'd' in 'mm' 101 116 Actual depth of neutral axis 'xu' in 12.54 18.77 'mm' Maximum depth of neutral axis 'xumax' 48.48 55.68 in 'mm' Area of steel required Ast in 'mm2' 259.53 388.33 Main Steel provided at continuous 8mm@150m 8mm@125mm edge m c/c c/c Area of steel provided in mm2 334.93 401.92 Dist. Steel provided at continuous 8mm@200m 8mm@200mm edge m c/c c/c Area of steel provided in mm 2 251.2 251.2 DESIGN OF TWO WAY SLAB:- Design Parametres:- Unit weight of RCC = 25KN/cum Concrete mix M25 Steel Fe500 Cover to Reinforcement 25mm Characteristic compressive strength of concrete = 25N/sqmm Yield strength of steel = 500N/sqmm Item Slab panel Description S1(End Panel)--Two S2(Portico Panel)-- S3(Three adjacent edges One short edge dis edges discontinuous continuous) discontinuous) --One short edge continuous
Length of slab panel ly in m 5.95 5.95 5
Width of slab panel lx in m 3.16 3.58 3.3 ly/lx 1.88 1.66 1.52 Overall depth required in mm 99 112 103 Width of slab panel considered 'b' in 1.00 1.00 1.00 'm' Depth provided 'D' in 'm' 0.125 0.125 0.125 Dia.of bars assumed 8mm 8mm 8mm Dead load in KN/sqm 4.125 4.125 4.125 Live load in KN/sqm 4.00 4.00 4.00 Floor finishes in KN/sqm 1.00 1.00 1.00 Total Load in KN/sqm 9.13 9.13 9.13 Short span(-) moment coefficient at 0.090 0.064 0.096 continuous edge Short span(-) moment at continuous 8.20 7.48 9.54 edge Short span(+) moment coefficient at 0.067 0.048 0.096 mid span Short span(+) moment at mid span 6.10 5.61 9.54 Long span(-) moment coefficient at 0.047 0.037 0.057 continuous edge Long span(-) moment at continuous 4.28 4.33 5.66 edge Long span(+) moment coefficient at 0.035 0.028 0.043 mid span Long span(+) moment at mid span 3.19 3.27 4.27 Design Moment Me1(-)ve in KN-m 12.30 11.23 14.31 Effective depth for balanced section 66.76 63.78 72 in 'mm' Effective depth provided 'd' in 'mm' 96 96 96 Actual depth of neutral axis 'xu' in 15.26 13.83 17.98 'mm' Maximum depth of neutral axis 'xumax' 46.08 46.08 46.08 in 'mm' Area of steel required Ast in 'mm2' 315.64 286.16 371.92 Main Steel provided at continuous 8mm@150mm c/c 8mm@150mm c/c 8mm@125mm edge c/c Area of steel provided in mm2 334.93 334.93 401.92 Design Moment Me1(+)ve in KN-m 9.16 8.42 14.31 Effective depth for balanced section 57.6 55.23 72 in 'mm' Actual depth of neutral axis 'xu' in 11.14 10.2 17.98 'mm' Maximum depth of neutral axis 'xumax' 46.08 46.08 46.08 in 'mm' Area of steel required Ast in 'mm2' 230.52 211.06 371.92 Main Steel provided at mid span 8mm@150mm c/c 8mm@150mm c/c 8mm@125mm c/c Area of steel provided in mm2 334.93 334.93 40.03 Design Moment Me1(-)ve in KN-m(Long 6.42 6.49 8.50 span) Effective depth for balanced section 48.24 48.49 55.48 in 'mm' Actual depth of neutral axis 'xu' in 7.69 7.78 10.3 'mm' Maximum depth of neutral axis 'xumax' 46.08 46.08 46.08 in 'mm' Area of steel required Ast in 'mm2' 159.18 160.91 213.05 Dist. Steel provided at continuous 8mm@200mm c/c 8mm@200mm c/c 8mm@200mm edge c/c Area of steel provided in mm2 251.2 251.2 251.2 Dist.steel at mid span 8mm@200mm c/c 8mm@200mm c/c 8mm@200mm c/c 2.622