Академический Документы
Профессиональный Документы
Культура Документы
sing, commercial and industrial construction, through the public sector, to internal applications. Junction boxes
protect the electrical connections and distributions against contact and other environmental factors.
36 VBS
Junction box systems
VBS 37
Selection matrix
Junction box systems
From page 44
Thread and
2K technology
push- V-TEC VBX
B9/T M or 110 x 110 x 50 4 lid bolts
cable gland through VM KL 60
membrane
From page 46
90 x 43 x 42
Proven 75 x 75 x 36.2 Clamshell Penetration 689
A series
technology 74.3 x 74.3 x 42.7 membrane 700/4 BM
Except
85 x 85 x 40
A6
From page 48
ECO series
can be lined 42 x 100 x 42 Can be cut
ECO up, thus 75 x 100 x 42 Clamshell
saving a 100 x 100 x 42
on the insi- 689
series
fastening 129 x 100 x 42 de
point
From page 52
38 VBS
Selection matrix
Junction box systems
From Page 44
EDVS or
Extremely 85 x 85 x 46 Break-out Cable VBX KL25
VBX xx 4 lid bolts
robust 110 x 110 x 59 openings glands VBX KL60
From page 60
83.4 x 83.4 x 40
89.4 x 89.4 x 47.5 EDVS or
Very hard, 93.4 x 93.4 x 51
KL 25
Break-out cable
B series without thre- 122.4 x 122.4 x 14 lid bolts -
ad 58.5 openings glands
KL 250
168 x 143 x 70
243 x 168 x 82.5
From page 63
94 x 94 x 45 700/4 BM
81.9 x 81.9 x 46
Thread and Cable
Very hard, 700/6 BM
B series 91 x 91 x 51 4 lid bolts break-out glands
with thread KL 100
136 x 111 x 57
openings
196 x 144 x 71 KL 160
VBS 39
Junction box systems
System overview
A series Page 46
B series
B9T Page 44
40 VBS
Page 60
VBS 41
Junction box systems
The cable junction boxes are made of a thermoplastic polymer, either polypropylene or polyethylene. These two
plastics are soft, which means that it is malleable to a certain extent. This allows installation of cables either
directly through the wall with a penetration pin, or the wall can be cut with a knife at the pre-marked points, in order
to create an insertion opening for cables.
System components
A series, ECO series, D9T, OBO quick family, cable glands, sprint screw with angler anchor
B9T application, wall mounting A series application, wall mounting ECO series application, wall mounting
Complete B9T mounting with cable glands Complete A11 mounting and installation with Quick Complete mounting and installation of series-
pipe and Quick clip 2955 mounted ECO12 and ECO18 with Quick pipe and
Quick clip 2955
The fastening holes in the floor area have a With the B9T, the soft membrane is just pushed The cable gland is simply screwed into the available
soft membrane, which fixes the fastening screws through directly with the cable, without any box thread. The soft membrane remains intact.
and maintains the protection rating. additional tools thus making an automatic seal.
ECO installation preparation ECO series wall mounting ECO series installation
Safe and easy: self-sealing cable entries, cuttable The ECO junction boxes can be arranged quickly For mounting, just attach the lid on one side of the
from inside in two stages. and easily. As there is no second fastening, you box. This means that it is always to hand and the
save both time and money. The individual seats ECO-BOX can be closed in the blink of an eye.
always guarantee a firm fit.
The stable side couplers mean that the junction box The penetration pin supplied permits quick and easy Tidy, technically perfect installations can be created
can be installed quickly and easily. cable installation. with the A series and the Quick family from OBO.
01 VBS Katalog 2008 / en / 25/11/2008 (LLExport_00027)
VBX series
Type Accessories Colour Box Pack. Weight Item No. Price
/% pc.
46
pcs pcs kg/% pc PP
18
VBX 25 M/5 3 cable entries, 1 terminal strip light grey 80 5 10.200 2008 44 0 27.6
VBX 25 M 3 cable entries light grey 80 5 6.100 2008 07 6
M Protection rating with plug-in seal IP 54, with cableglands IP 65,
nominal voltage 400 V with 4 captive lid screws, 4 fastening holes for screws of 5mm diameter
inside the box (spacing: 45mm).
Nominal cross-section 2,5 - 4mm
7 entries M20
Dimensions: 85 x 85 x 46mm 85
Clear internal dimensions: 78 x 78 x 30,5mm
Sealable
59
pcs pcs kg/% pc PP
23.5
VBX 60 M/5 3 cable entries, 5 18.300 2008 56 4
1 terminal strip light grey 45
37.6
/pc.
01 VBS Katalog 2008 / en / 25/11/2008 (LLExport_00027)
bemounted very easily by inserting the screw plug supplied into the centre hole on themounting
58
plate. VARIOBOX series junction boxes can bemounted by bending the fastening points up. 25 25
10
48.5
29
36.7
136
Type B9/T junction boxes can bemounted very easily by inserting the screw plug supplied into the
centre hole on themounting plate.
Marked straps provide rapid fastening.
Please order the fastening screw, type FRS B6 x 12, separately.
D2
The push-in nipple can be cut back to suit the relevant cable diameter.
Important dimensions, plug-in seal
G L A D1 D2 D3 D4 D5 D6 D7 D8
L
mm mm mm mm mm mm mm mm mm mm
M20 12.8 3.4 24.8 20.3 06 510 915 1417
M25 14.5 4.3 29.5 25.3 06 510 915 1420 1922
M32 17.8 4.4 36.3 32.3 06 510 915 1420 1925 2428
18
per terminalmax. 4 x 2.5mm, 5 x 1.5mm or 6 x 1mm.
37.5
62
01 VBS Katalog 2008 / en / 25/11/2008 (LLExport_00027)
42.7
A9 light grey 120 10 5.940 2000 09 1
16.5
Protection rating IP 54, nominal voltage 660 V, nominal cross-section 2,5mm, with 1 lid screw
and holes for screwing to M6 threaded anchors in the base, 7 pre-assembled entry nipples for
cable diameters 713mm.
74.3
Dimensions: 74.3 x 74.3 x 42.7mm
Clear internal dimensions: 65 x 65 x 38mm.
77.3
Dimension: 85 x 85 x 40mm
Clear internal dimensions: 75 x 75 x 35mm.
Two penetration pins for every 10 sockets.
Type Size For Colour Box Pack. Weight Item No. Price
23
8.6
/% pc.
mm pcs pcs kg/% pc PE
89 PG 13,5 12 - 16 light grey 3.000 100 0.100 2012 04 9
Closed nipple with perforationmembrane for pipes of 1216mm, required hole diameter
18.519mm, wall thicknessmax. 3mm.
8
Terminal block, nickel-plated brass, steel screws,galvanised and transparently passivated,
11 nominal cross-section 2,5mm, nominal voltage 660 V, 5-pole, with terminal sockets,max.
connectable cross-sections per terminal: 4 x 2.5mm, 5 x 1.5mm or
11
6 x 1mm, unnecessary poles can be cut off and used as individual terminals.
61.75 System accessories for junction boxesA 8;A 11; ECO 12; ECO 14; ECO 18; T40
/% pc.
pcs pcs kg/% pc MF
700/4 120 10 2.260 2017 32 6
Nickel-plated brass terminals, steel screws,galvanised and transparently passivated, nominal
9
cross-section 2,5mm, rated voltage 660 V, 5-pole, with socket terminals,max. connectable
4.7 cross-sections per terminal: 4 x 2.5mm, 5 x 1.5mm or 6 x 1mm.
11.7
5.2 System accessories for junction boxA 9; B 9 B M; B 10 M
c a . 43.7
01 VBS Katalog 2008 / en / 25/11/2008 (LLExport_00027)
8
Terminal block, nickel-plated brass, steel screws,galvanised and transparently passivated,
nominal cross-section 2,5mm, nominal voltage 660 V, 5-pole, with terminal sockets,max. 11
connectable cross-sections per terminal: 4 x 2.5mm, 5 x 1.5mm or
11
6 x 1mm, unnecessary poles can be cut off and used as individual terminals.
System accessories for junction boxesA 8;A 11; ECO 12; ECO 14; ECO 18; T40 61.75
VBS
49
Junction box systems
The cable junction boxes are made of a thermoplastic polymer, either polypropylene or polyethylene. These two
plastics are soft, which means that it is malleable to a certain extent. This allows installation of cables either
directly through the wall with a penetration pin, or the wall can be cut with a knife at the pre-marked points, in order
to create an insertion opening for cables.
System components
T series, V-TEC-VM with locknut, mounting plate, earthing terminals and hat profile rails
Installation with the round junction box T 25. Installation with the smallest square junction box T Installation with a rectangular junction box T 160.
40.
The boxes can be fastened through two to four From box size T 60, the junction boxes can There are two to four fastening domes integrated in
break-out openings in the base. The openings can be mounted on the substrate through the corner the base substrate for metal screws of 3.5 x
be reclosed using cover caps. domes for lid fastening. 9.5 mm, in order to fasten the box, e.g. to
a mounting plate.
Plug-in seals Pipe push-in seals Insertion opening / cable gland insert
Cables can be installed directly by pushing through When using pipes, the user can also use plug-in Cable glands of type V-TEC VM can be inserted in
without any aids. pipe seals. the insertion opening, in order to create mechanical
resistance and strain relief.
All the lids are fastened captively in the box interior From size T 60, the lid is fastened to the base with Junction boxes of size T 60 or larger are fitted with a
with a holding strap on the base. sash locks and can be opened or closed by giving foamed lid seal. This creates the high protection
the lock a quarter-turn. rating of IP66.
An earthing terminal can be attached to the central Hat profile rails can be mounted in lengthwise, Screwless terminals are used for wiring "on the fly"
dome in the interior of the T 25 to T 100 junction transverse or diagonal directions in the cable box for cross-sections of up to 2.5 mm.
boxes. bases of sizes T 60 to T 350.
Type Version Entries Colour Box Pack. Weight Item No. Price
/% pc.
pcs pcs kg/% pc PP
T 40 Standard 7 x M25 light grey 80 5 6.700 2007 04 5
T 40 7 x M25 pure white 80 5 6.700 2007 51 7
T 40F 960 C flame-resistant 7 x M25 light grey 80 5 6.700 2007 32 0
T 40 With red lid 7 x M25 red-grey 80 5 6.700 2007 63 0
T 40 UV UV-resistant 7 x M25 pure white 80 5 0.000 2007 41 0
T 40 KL With terminal strip 7 x M25 light grey 80 5 8.900 2007 43 2
The cable junction boxes aremade of a thermoplastic polypropylene polymer with plug-in
sealsmade of ethylene vinyl acetate (EVA). This plastic is soft, whichmeans that it ismalleable.
This allows installation of cables either directly through the 7 x M25 seals, or the seals can be cut
with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. In
addition, cableglands can be inserted through the openings instead of the seals and locked with a
locknut from inside.
The cable junction boxes can be screwed onto an M6 thread ormounted onmounting plates in the
openings on the floor using steel bolts 3.5 x 9.5.
Clear internal dimensions: 77 x 77 x 46mm
Lid with labelling panel
Type Version Entries Colour Box Pack. Weight Item No. Price
/% pc.
pcs pcs kg/% pc PP
T 60 Standard 7 x M25 light grey 60 5 12.300 2007 06 1
T 60 7 x M25 pure white 60 5 12.300 2007 52 5
T 60F 960 C flame-resistant 7 x M25 light grey 60 5 12.300 2007 33 9
T 60 With red lid 7 x M25 red-grey 60 5 12.300 2007 63 8
T 60 UV UV-resistant 7 x M25 pure white 60 5 0.000 2007 41 2
T 60 KL With terminal strip 7 x M25 light grey 60 5 16.700 2007 43 4
The junction boxes aremade of a thermoplastic polypropylene polymer with plug-in sealsmade of
ethylene vinyl acetate (EVA). This plastic is soft, whichmeans that it ismalleable. This allows
installation of cables either directly through the 7 x M25 seals, or the seals can be cut with a knife
at the pre-marked points, in order to create an insertion opening for cables or pipes. In addition,
cableglands can be inserted through the openings instead of the seals and locked with a locknut
from inside.
The junction boxes can bemounted onmounting plates in the openings on the base using steel
bolts 3.5 x 9.5.
Clear internal dimensions: 100 x 100 x 48mm
Lid with labelling panel and sealable.
01 VBS Katalog 2008 / en / 25/11/2008 (LLExport_00027)
Type Version Entries Colour Box Pack. Weight Item No. Price
/% pc.
pcs pcs kg/% pc PP/GF
T 160 Standard 7x M25 + 5x M32 light grey 20 1 30.000 2007 09 3
T 160 7x M25 + 5x M32 pure white 20 1 30.000 2007 54 1
T 160F 960 C flame-resistant 7x M25 + 5x M32 light grey 20 1 30.000 2007 35 5
T 160 With red lid 7x M25 + 5x M32 red-grey 20 1 30.000 2007 64 9
T 160 UV UV-resistant 7x M25 + 5x M32 pure white 20 1 0.000 2007 41 6
The junction boxes aremade of a thermoplastic polypropylene polymer with plug-in sealsmade of
ethylene vinyl acetate (EVA). This plastic is soft, whichmeans that it ismalleable. This allows
installation of cables either directly through the 7x M25 +5x M32 seals, or the seals can be cut
with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. In
addition, cableglands can be inserted through the openings instead of the seals and locked with a
locknut from inside.
The junction boxes can bemounted onmounting plates in the openings on the base using steel
bolts 3.5 x 9.5.
Clear internal dimensions: 176 x 135 x 67mm
Lid with labelling panel and sealable.
Type Version Entries Colour Box Pack. Weight Item No. Price
/% pc.
pcs pcs kg/% pc PP/GF
T 250 Standard 9x M25 + 7x M32 light grey 8 1 50.000 2007 10 9
T 250 9x M25 + 7x M32 pure white 8 1 50.000 2007 55 4
T 250F 960 C flame-resistant 9x M25 + 7x M32 light grey 8 1 50.000 2007 36 3
T 250 With red lid 9x M25 + 7x M32 red-grey 8 1 50.000 2007 65 7
T 250 UV UV-resistant 9x M25 + 7x M32 pure white 1 1 0.000 2007 41 8
The junction boxes aremade of a thermoplastic polypropylene polymer with plug-in sealsmade of
ethylene vinyl acetate (EVA). This plastic is soft, whichmeans that it ismalleable. This allows
installation of cables either directly through the 9x M25 +7x M32 seals, or the seals can be cut
with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. In
addition, cableglands can be inserted through the openings instead of the seals and locked with a
locknut from inside.
The junction boxes can bemounted onmounting plates in the openings on the base using steel
bolts 3.5 x 9.5.
Clear internal dimensions: 225 x 173 x 86mm
Lid with labelling panel and sealable.
T series closed
Type Version Entries Colour Box Pack. Weight Item No. Price
/% pc.
pcs pcs kg/% pc PP
T 40 Closed None light grey 80 5 6.300 2007 22 3
The cable junction boxes aremade of a thermoplastic polypropylene polymer with closed side
walls. Thismeans that openings can bemade wherever they are required. These openings can be
closed off with EDK plug-in seals to allow cable installation through the seal. In addition,
cableglands can be inserted through the openings instead of the seals and locked with a locknut
from inside.
The cable junction boxes can be screwed onto an M6 thread ormounted onmounting plates in the
openings on the floor using steel bolts 3.5 x 9.5.
Clear internal dimensions: 77 x 77 x 46mm
Lid with labelling panel
Type Version Entries Colour Box Pack. Weight Item No. Price
/% pc.
pcs pcs kg/% pc PP
T 60 Closed None light grey 60 5 12.000 2007 23 9
The cable junction boxes aremade of a thermoplastic polypropylene polymer with closed side
walls. Thismeans that openings can bemade wherever they are required. These openings can be
closed off with EDK plug-in seals to allow cable installation through the seal. In addition,
cableglands can be inserted through the openings instead of the seals and locked with a locknut
from inside.
The junction boxes can bemounted onmounting plates in the openings on the base using steel
bolts 3.5 x 9.5.
Clear internal dimensions: 100 x 100 x 46mm
Lid with labelling panel and sealable.
Type Version Entries Colour Box Pack. Weight Item No. Price
/% pc.
pcs pcs kg/% pc PP
T 100 Closed None light grey 40 1 16.200 2007 25 5
The cable junction boxes aremade of a thermoplastic polypropylene polymer with closed side
walls. Thismeans that openings can bemade wherever they are required. These openings can be
closed off with EDK plug-in seals to allow cable installation through the seal. In addition,
01 VBS Katalog 2008 / en / 25/11/2008 (LLExport_00027)
cableglands can be inserted through the openings instead of the seals and locked with a locknut
from inside.
The junction boxes can bemounted onmounting plates in the openings on the base using steel
bolts 3.5 x 9.5.
Clear internal dimensions: 136 x 102 x 57mm
Lid with labelling panel and sealable.
Type Version Entries Colour Box Pack. Weight Item No. Price
/% pc.
pcs pcs kg/% pc PP/GF
T 250 Closed None light grey 8 1 48.300 2007 28 7
The cable junction boxes aremade of a thermoplastic polypropylene polymer with closed side
walls. Thismeans that openings can bemade wherever they are required. These openings can be
closed off with EDK plug-in seals to allow cable installation through the seal. In addition,
cableglands can be inserted through the openings instead of the seals and locked with a locknut
from inside.
The junction boxes can bemounted onmounting plates in the openings on the base using steel
bolts 3.5 x 9.5.
Clear internal dimensions: 225 x 173 x 86mm
Lid with labelling panel and sealable.
Type Version Entries Colour Box Pack. Weight Item No. Price
/% pc.
pcs pcs kg/% pc PP/GF
T 350 Closed None light grey 5 1 58.800 2007 30 3
The cable junction boxes aremade of a thermoplastic polypropylene polymer with closed side
walls. Thismeans that openings can bemade wherever they are required. These openings can be
closed off with EDK plug-in seals to allow cable installation through the seal. In addition,
cableglands can be inserted through the openings instead of the seals and locked with a locknut
from inside.
The junction boxes can bemounted onmounting plates in the openings on the base using steel
bolts 3.5 x 9.5.
Clear internal dimensions: 267 x 182 x 110mm
Lid with labelling panel and sealable.
mm mm mm mm mm mm mm mm mm mm mm
M25 10.1 2.2 29.5 25.4 05 410 915 14.518 18.522
M32 11.4 2.2 36.4 32.3 05 410 915 14.518 18.522 2427
M40 13.4 2.2 44.1 40.2 05 410 915 14.518 18.522 2427 3134
mm mm mm mm mm mm
M25 30 2.2 29.5 25.3 15.0 18.4
M25 30 2.2 29.5 25.3 18.5 24.2
M32 36 2.2 36.4 32.3 18.5 24.2
M32 36 2.2 37 32.3 24 31.2
M40 49 2.2 44.4 40.3 24 31.2
M40 49 2.2 46 42.3 31 39.2
Type B9/T junction boxes can bemounted very easily by inserting the screw plug supplied into the
centre hole on themounting plate.
Marked straps provide rapid fastening.
Please order the fastening screw, type FRS B6 x 12, separately.
mm mm pcs kg/% pc ST / FS
MP UNI 115 170 40 13.300 7084 77 3
Mounting plate, for fastening on the side rail of cable support systems.
Fastening on the side rail of themesh cable tray is carried out without screws by bending the
locking shackle. Fastening on the side rail of cable trays or cable ladders is carried out with two
truss-head bolts. Type B9/T junction boxes can bemounted very easily by inserting the screw plug
supplied into the centre hole on themounting plate.
Please order the fastening screw, type FRS B6 x 12, separately.
Accessories can be fastened to themounting plate. In addition, themounting plate can be used for
wallmounting.
8
Terminal block, nickel-plated brass, steel screws,galvanised and transparently passivated,
11 nominal cross-section 2,5mm, nominal voltage 660 V, 5-pole, with terminal sockets,max.
connectable cross-sections per terminal: 4 x 2.5mm, 5 x 1.5mm or
11
6 x 1mm, unnecessary poles can be cut off and used as individual terminals.
61.75 System accessories for junction boxesA 8;A 11; ECO 12; ECO 14; ECO 18; T40
18
per terminalmax. 4 x 2.5mm, 5 x 1.5mm or 6 x 1mm.
37.5
62
/% pc.
pcs pcs kg/% pc MF
8.4
39.2
4.1 9 Nickel-plated brass terminals, steel screws,galvanised and transparently passivated, nominal
cross-section 10mm, nominal voltage 660 V, 5-pole, with terminal sockets, Max. connectable
cross-sections per terminal: 3 x 10mm, 4 x 6mm or 4 x 4mm.
33.5
17
87
01 VBS Katalog 2008 / en / 25/11/2008 (LLExport_00027)
The Duroplast junction boxes are made of Aminoplast. This plastic is hard and is highly resistant, meaning that the
walls are very stiff. This means that the required openings can be broken-out at the marked points using a
screwdriver. Cables can be perfectly installed with cable glands, either directly in a housing thread or in a
penetration hole with a cable gland and a locknut in the interior.
System components
B series B25B250, B series B9B12, cable glands, locknuts, Sprint screw with Angler anchor
Complete mounting of a Duroplast junction box with Complete mounting with B11 junction box with
plug-in seals and pressure ISO clips screwed-in cone cable glands and pressure ISO
clips.
The break-out openings can be broken out using a Cables can be installed through plug-in seals or Complete installation with B100 junction box, EDVS
screwdriver or another tool, so that plug-in seals or cable glands. The IP protection rating can thus plug-in seal and pressure ISO clips.
cable glands with cables can be installed. be maintained.
The break-out openings can be broken out using a Cable glands can be screwed directly into the Installed cable glands can be locked here in the
screwdriver or another tool, so that cables can be thread in the housing. interior with a locknut, if there is no thread available
installed. on the housing. Cables can be well sealed and
safely installed with cable glands.
for screws up to 5mm on the inside of the box, but outside the terminals. 4 lid screws, sealable
with sealing caps supplied,
6 break-out entries 25.5mm (M25), with 4 push-in seals EDVS 25 for cable diameters
7.522mm.
Dimensions: 122.4 x 122.4 x 58.5mm
Clear internal dimensions: 108 x 108 x 51mm.
D2
The push-in nipple can be cut back to suit the relevant cable diameter.
Important dimensions, plug-in seal
G L A D1 D2 D3 D4 D5 D6 D7 D8
L
mm mm mm mm mm mm mm mm mm mm
M20 12.8 3.4 24.8 20.3 06 510 915 1417
M25 14.5 4.3 29.5 25.3 06 510 915 1420 1922
M32 17.8 4.4 36.3 32.3 06 510 915 1420 1925 2428
/% pc.
pcs pcs kg/% pc MF
KL 25 600 50 2.300 2016 08 7
max. 16.78
4.7
Nickel-plated brass terminals, steel screws,galvanised and transparently passivated, nominal
cross-section 2,5mm, nominal voltage 660 V, 5-pole, with terminal sockets, Max. connectable
24
6 x 1mm.
10.75
System accessories for junction box B 25 M
64
01 VBS Katalog 2008 / en / 25/11/2008 (LLExport_00027)
cross-section 4 - 6mm, nominal voltage 660 V, 5-pole, with terminal sockets, Max. connectable
10.75 cross-sections per terminal: 3 x 6mm, 4 x 4mm 5 x 2.5mm or 8 x 1.5mm.
72.6 System accessories for junction boxes B 40 M; B 60 M
14.3
/% pc.
pcs pcs kg/% pc MF
8.4
39.2
KL 100 60 5 7.000 2016 12 5
16
Nickel-plated brass terminals, steel screws,galvanised and transparently passivated, nominal 4.1 9
cross-section 10mm, nominal voltage 660 V, 5-pole, with terminal sockets, Max. connectable
cross-sections per terminal: 3 x 10mm, 4 x 6mm or 4 x 4mm.
33.5
17
System accessories for junction boxes B 100 Mand T 100
7.5
87
Dimensions: 94 x 94 x 45mm
Clear internal dimensions: 84 x 84 x 34mm.
102 (Bef.--Loecher)
ma x. 20.2
/% pc.
pcs pcs kg/% pc MF
700/4 120 10 2.260 2017 32 6
Nickel-plated brass terminals, steel screws,galvanised and transparently passivated, nominal
9
cross-section 2,5mm, rated voltage 660 V, 5-pole, with socket terminals,max. connectable
cross-sections per terminal: 4 x 2.5mm, 5 x 1.5mm or 6 x 1mm. 4.7
11.7
System accessories for junction boxA 9; B 9 B M; B 10 M 5.2
c a . 43.7
Type Box Pack. Weight Item No. Price
/% pc.
10
pcs pcs kg/% pc MF
9
3.2
700/6 120 10 3.460 2017 29 6
max. 29
11.7
Nickel-plated brass terminals, steel screws,galvanised and transparently passivated, nominal
c a . 43.7
cross-section 4 - 6mm, nominal voltage 660 V, 5-pole, with terminal sockets, Max. connectable 5.9
cross-sections per terminal: 3 x 6mm, 4 x 4mm 5 x 2.5mm or 8 x 1.5mm.
Junction box
117/2.5 VDE / PG 16: nominal cross-section 2.5mm, with 5-pole terminal insert 2.5mm and
cable entries with strain relief for cable diameter 914mm.
117/6 VDE / PG 21: nominal cross-section 6mm, with 5-pole terminal insert 6mm and cable
entries with strain relief for cable diameter 1218mm.
Twin gland
28 Type Thread Colour Box Pack. Weight Item No. Price
/% pc.
pcs pcs kg/% pc UF
113 Pg 13,5 light grey 60 5 4.670 2024 13 6
113 Pg 16 light grey 60 5 4.360 2024 16 0
13
Protection rating IP 54, with removable polystyrene lid, as well as two polyethylene connection
thread sealing rings.
51
113/13.5: with connection thread Pg 13.5, 2 halfglands Pg 13.5 for cable diameter 6.510.5mm.
113/16: with connection thread Pg 16, 2 halfglands Pg 13.5 for cable diameter 6.510.5mm.
54.5
54.5
01 VBS Katalog 2008 / en / 25/11/2008 (LLExport_00027)