Академический Документы
Профессиональный Документы
Культура Документы
Created by:
Phone:
Date: 18/07/2017
Tender Text
Liquid:
Pumped liquid: Water
Liquid temperature range: 32 .. 248 F
Liquid temperature during operation: 68 F
Density: 62.29 lb/ft
Technical:
Speed for pump data: 1490 rpm
Rated flow: 4130 US GPM
Rated head: 229.7 ft
Actual impeller diameter: 19.09 in
Impeller nom: 19.69 in
Primary shaft seal: BAQE
Secondary shaft seal: NONE
Curve tolerance: ISO9906:2012 3B
Materials:
Pump housing: Cast iron
EN-GJL-250
ASTM A48-40 B
Impeller: Bronze
DIN W.-Nr. CuSn10
ASTM B584-C83600
Rubber: EPDM
Wear ring mat.: High alloy brass(CuZn34Mn3AI2
Installation:
Maximum ambient temperature: 140 F
Maximum operating pressure: 232 psi
Flange standard: EN 1092-2
Pump inlet: DN 300
Pump outlet: DN 250
Pressure stage: PN 16
Coupling type: Spacer
Base frame: EN / ISO
Electrical data:
Motor type: MMG355MA
IE Efficiency class: IE2
Rated power - P2: 340 HP
Mains frequency: 50 Hz
Rated voltage: 3 x 380-420D/660-725Y V
Rated current: 440-395/250-230 A
Starting current: 710-710 %
Cos phi - power factor: 0,9
Date: 18/07/2017
Others:
Minimum efficiency index, MEI : 0.45
ErP status: EuP Standalone/Prod.
Net weight: 6270 lb
Gross weight: 6810 lb
Shipping volume: 169 ft
Date: 18/07/2017
Position Qty. Description
1 NKG 300-250-500/485 A2-F-B-E-BAQE
Non-self-priming, single-stage, centrifugal pump designed according to ISO 5199 with dimensions and
rated performance according to ISO 2858. Flanges are PN 16 with dimensions according to EN 1092-2.
The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out
design enabling removal of the coupling, bearing bracket and impeller without disturbing the motor,
pump housing or pipework.
The unbalanced rubber bellows seal is according to DIN EN 12756.
The pump is fitted with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted
on a common base frame.
Cast-iron parts have an epoxy-based coating made in a cathodic electro-deposition (CED) process.
CED is a high-quality dip-painting process where an electrical field around the products ensures
deposition of paint particles as a thin, well-controlled layer on the surface. An integral part of the
process is a pretreatment. The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
The pump housing has both a priming and a drain hole closed by plugs.
The impeller is a closed impeller with double-curved blades with smooth surfaces. The impeller is
statically balanced according to ISO 1940-1 class G6.3 and hydraulically balanced to compensate for
axial thrust.
Wear rings used in pump housing and for impeller are made of bronze/brass or cast iron.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the spring
and around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movement
is not prevented by deposits on the shaft.
Primary seal:
- Rotating seal ring material: Carbon graphite, metal-impregnated
- Stationary seat material: Silicon carbide (SiC)
Date: 18/07/2017
Position Qty. Description
This material pairing has a very good corrosion resistance and is especially suitable for water up to
+120 C. However, seal life will be reduced at temperatures above +90 C. The material pairing is not
recommended for liquids containing particles as this will result in heavy wear on the SiC face.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft is made of stainless steel and has a diameter of 2.36 in where the coupling is mounted.
The pump uses a spacer coupling between the pump and motor shaft.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards
and mounting designation B3 (IM 1001). Electrical tolerances comply with IEC 60034.
A variable speed drive makes adjustment of pump performance to any duty point possible. If the motor
is to be connected to a variable speed drive, the pump should be ordered with an electrically insulated
motor bearing.
Technical data
Liquid:
Pumped liquid: Water
Liquid temperature range: 32 .. 248 F
Liquid temperature during operation: 68 F
Density: 62.29 lb/ft
Technical:
Speed for pump data: 1490 rpm
Rated flow: 4130 US GPM
Rated head: 229.7 ft
Actual impeller diameter: 19.09 in
Impeller nom: 19.69 in
Primary shaft seal: BAQE
Secondary shaft seal: NONE
Curve tolerance: ISO9906:2012 3B
Materials:
Pump housing: Cast iron
EN-GJL-250
ASTM A48-40 B
Impeller: Bronze
DIN W.-Nr. CuSn10
ASTM B584-C83600
Rubber: EPDM
Wear ring mat.: High alloy brass(CuZn34Mn3AI2
Date: 18/07/2017
Position Qty. Description
Installation:
Maximum ambient temperature: 140 F
Maximum operating pressure: 232 psi
Flange standard: EN 1092-2
Pump inlet: DN 300
Pump outlet: DN 250
Pressure stage: PN 16
Coupling type: Spacer
Base frame: EN / ISO
Electrical data:
Motor type: MMG355MA
IE Efficiency class: IE2
Rated power - P2: 340 HP
Mains frequency: 50 Hz
Rated voltage: 3 x 380-420D/660-725Y V
Rated current: 440-395/250-230 A
Starting current: 710-710 %
Cos phi - power factor: 0,9
Rated speed: 1490 rpm
Efficiency: IE2 95,3%
Motor efficiency at full load: 95.3-95.3 %
Motor efficiency at 3/4 load: 95.2-95.2 %
Motor efficiency at 1/2 load: 94.1-94.1 %
Number of poles: 4
Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)
Insulation class (IEC 85): F
Lubricant type: Grease
Others:
Minimum efficiency index, MEI : 0.45
ErP status: EuP Standalone/Prod.
Net weight: 6270 lb
Gross weight: 6810 lb
Shipping volume: 169 ft
Date: 18/07/2017
250
200
150
100 100
50 50
0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 Q [US GPM]
P NPSH
[HP] [ft]
P1
350 70
P2
300 60
250 50
200 40
150 30
100 20
50 10
0 0
Date: 18/07/2017
H NKG 300-250-500/485, 50Hz eta
Description Value [ft] [%]
General information:
Product name: NKG 300-250-500/485
A2-F-B-E-BAQE 250
Pump version: A2
100 20
Materials: 0 0
Pump housing: Cast iron
103.10"
EN-GJL-250 6.50" 9 7/8 12 x 28
ASTM A48-40 B
Impeller: Bronze
12 x 28
DIN W.-Nr. CuSn10 19.69"
Material code: B
22.83"
Rubber: EPDM
5.12"
Code for rubber: E
4 3/8 1.10" 28.74"
Wear ring mat.: High alloy
= =
90.16"
35.04"
64.17"
=
12.99"
32.68"
22.83"
11 13/16
48.11"
12 x 28 19.69"
12 x 28
6.50"
103.10"
9 7/8
90.16" 35.04"
Installation:
Maximum ambient temperature: 140 F
Maximum operating pressure: 232 psi
Flange standard: EN 1092-2
Connect code: F
+T +T +T
Liquid:
Pumped liquid: Water TO AMPLIFIER
RELAY
Electrical data:
Motor type: MMG355MA
IE Efficiency class: IE2
Rated power - P2: 340 HP
Mains frequency: 50 Hz
Rated voltage: 3 x 380-420D/660-725Y V
Rated current: 440-395/250-230 A
Starting current: 710-710 %
Cos phi - power factor: 0,9
Rated speed: 1490 rpm
Date: 18/07/2017
Description Value
Efficiency: IE2 95,3%
Motor efficiency at full load: 95.3-95.3 %
Motor efficiency at 3/4 load: 95.2-95.2 %
Motor efficiency at 1/2 load: 94.1-94.1 %
Number of poles: 4
Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)
Insulation class (IEC 85): F
Motor protec: PTC
Motor No: 83L15152
Lubricant type: Grease
Others:
Minimum efficiency index, MEI : 0.45
ErP status: EuP Standalone/Prod.
Net weight: 6270 lb
Gross weight: 6810 lb
Shipping volume: 169 ft
Date: 18/07/2017
19.69"
22.83"
12 x 28
5.12"
9 7/8
28.74"
32.68"
35.04"
12 x 28
48.11"
1.10"
12.99"
=
103.10"
64.17"
90.16"
=
12.99"
6.50"
4 3/8
11 13/16
Date: 18/07/2017
+T +T +T
+T +T +T
TO AMPLIFIER
RELAY
L1 L2 L3
Date: 18/07/2017
Order Data:
Product name: NKG 300-250-500/485 A2-F-B-E-BAQE
Amount: 1
Product No: 97834357
Date: 18/07/2017
Exploded view ( NK )
116
109 72a
77
77b
77a
45
6 105b 116
24 105c
26 105 109
72a
105c
20 45 105 77
67 17
66 108
49
105b 36 110
116 26a 110a
105 109
24b 17
66a 72a 107
108 106
45b
45a 110
77 110a
65 105
24
72a 77 107
36 106
45c 26a
24b
65b
45b 77
11 17
159a
156a 76a 7g
159f 11a 76
54a 124e
54 17
7a
51 36a
53a
53
53b
159f
156a
124c 86 159a
124d 7b
7
90d
7c
90c
90e 7h
7j
7k
89b
89p 7e
89
89o 7d
89r 7h
89c
89b 89a
89p 89s
89b 89
89a
89o 89d
89a
89p
89d
89f
89
89q
89s
89g
89e
90a
90b
90
Date: 18/07/2017
Exploded view ( TM056586 MMG)
164
151
156
176
188a
159
164a
156a
156b 158
154
153
191
156b
159b